Access enforcer and User Data Source for HR

We are on Access Enforcer 5.2 - service pack 2:
My problem is that when creating a new request in AE, I able to get a list of all users when I point my User Data Source to either SAP or UME. However when I attempt to create a request whilst pointing the User Data Source at the SAPHR system, I do not get any users back (and we have user set up in the SAP HR system).
I’ve changed the connector to ‘YES’ under the HR System box, I’ve changed the Data Source Type and Details Source Type to point at the SAPHR and still it fails to fetch any users.
I've tried looking at the log, but can't get much out of it.
I would appreciate it, if anyone could provide any assistance.
Thanks you in advance.
Amarjit
Message was edited by:
        amarjit singh

Hi Micheal,
Thanks for your reply.
I'm pointing both Data Source Type and Details Source Type to the same system SAPHR and to the same system name (which is our dev system)
Regards,
Amarjit

Similar Messages

  • BPM and multi data sources for users??

    Hi all
    can BPM read users from more than Data source?
    my case is i want to create from BPM Admin Center a Directory Service(or more than one) , so i can read users and groups from ldap AD and DataBase ....or from 2 ldaps
    Thanks

    Federated directory support was added in 10gR3. This is done at the web application level, such as the workspace and allows the workspace to connect to multiple directories and provide a consolidated interface for users. This is configured through the workspace.properties file but I am not sure how much documentation exists.

  • User Data Source in GRC AC 10

    Dear Experts,
    Need clariofcation regarding User data Source for SAP GRC AC .
    Till GRC AC 5.3 we can use only one sap backend system as user data source for gettting users like manager,approver etc and have to change User data source if user reside in some other system .
    Is this been address with GRC AC 10 .
    Thanks & Regards
    Asheesh

    Hi Asheesh,
    Looking at the configuration, you can configure multiple target systems against all of the different data sources and authentication sources. It uses the sequence number to identify in which order these should be accessed.
    SPRO - Ref IMG - GRC - Access Controls - Maintain Data Sources Configuration
    However, in my experience connecting lots of different systems to take elements of user data causes performance issues and often cuases some confusion about the actual data to be displayed. You'll need to consider the field mapping and source elements casrefuly to ensure you don't get conflicting information.
    Simon

  • MM and SD data source

    <Moderator Message: First place to start for you should be the [help|http://help.sap.com]. In case you have some specific issues come back and ask>
    HI,
        please help me what are all master and transaction data source for MM and SD
    Regards,
    siva.
    Edited by: Siegfried Szameitat on Feb 19, 2009 11:26 AM

    Hi
    for purchasing
    2lis_02_cdr
    2lis_02_hdr
    2lis_02_itm
    2lis_02_scl
    2lis_02_scn
    2lis_02_scr
    for FI
    FI_AP
    0FI_AP_1 , 0FI_AP_3, 0FI_AP_4, 0FI_AP_6, 0FI_AP_7.       
    FI_AR
    0FI_AR_1, 0FI_AR_3, 0FI_AR_4, 0FI_AR_5, 0FI_AR_6, 0FI_AR_7, 0FI_AR_8,0FI_AR_9, 0FI_AR_10
    FI_GL
    0FI_GL_1, 0FI_GL_2, 0FI_GL_4, 0FI_GL_7, 0FI_GL_10

  • User Data Source - Access Enforcer

    Hi,
    I currently have my User Details Data Source and Search Data Source in AE pointed to the UME. In the UME I have my requestors and approvers set up. However when I go to raise a request to change a user account and want to search for an SAP user, the search only returns the requestors and approvers set up in the UME and does not show user data from SAP. How can set up AE so that it shows me user data from SAP and requestor/approver data from the UME?
    Thanks,
    Gary

    What you can do is... to point your UME to your SAP system,  where you can find all users.....
    And keep your configuration of AE the way you have it....
    Another way is, to change your configuration of User Details Data Source pointing to SAP.
    Youy User Details Data Source have to point to the system that have all the new users....
    For example, in my company before giving the SAP access we give LDAP access, so my User Details Data Source  are pointing to my LDAP system.... this way i can find easily the  user that need to request access..
    Hope this help.
    Regards,

  • How to fetch APPROVER NAME  and approval date dynamically for an user

    Hi all..
    How to fetch approver name and approval date dynamicall for an user in an email template..
    can any help me to sort out this pbm,i am new to IDM..
    Thanks in advance..

    Access policies get a static value.  You can't populate a field with an adapter.  If you must do this, leave the field blank, and put an adapter on the process form for your field that must be populated using code or logic.
    -Kevin

  • Using MS Access as a Data Source for BW

    I have used MS Excel spreadsheets and 'mainframe' databases as data sources for BW in the past.
    The company I ma working with has a large MS Access database containing historical sales data (from an R/3 3.1H system) that they wish to upload into BW v3.5 for comparison purposes.
    My undersatnding was that MS Access was not a valid data source for BW. Could someone point out the error of my thinking and suggest how to set up MS Access as a data source.
    Thanks in anticipation

    Hi Austen,
    Welcome onboard!
    True, as far as I know, MS Access is not supported by BW. But you can use MSSQL instead. MSSQL is supported. I think the free version of MSSQL called <b>MSDE</b> (<i>Microsoft SQL Desktop Edition</i>) is also supported (<i>Although I have not tried it yet</i>)
    Importing MSACCESS data to a similar table in MSSQL is very easy. Just use the <b>Data Transfer Utility</b> bundled with MSSQL. It will bulk insert data from MSACCESS to MSSQL. Then from MSSQL, you can set up BW to connect to it and you are done...
    Hope I have helped. if I did, please grant points...
    Regards,
    Jkyle

  • SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

    Hi,
    I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
    "An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
    I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
    Thanks in advance.
    Poomani Sankaran

    Hi Poomani,
    Thanks for posting your issue,
    you must have to Install SQL Server 2012 ADOMD.Net  on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
    http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • Creation of a generic extractor and data source for the FAGLFLEXA table

    Hi All,
    Need to create a generic extractor and data source for the FAGLFLEXA table to support AR reporting. This table contains the necessary profit center information to perform LOB reporting against the AR data.
    Please advice on how to do this.
    Regards, Vishal

    Hi Vishal,
    Its seems a simple a work out.
    1.Go to RSO2 & choose the relevant option ie. whether you want to create Transactional DS, Master Data DS or Text DS.
    2. Name it accordingly & then create.
    3. Give description to it & then give table name FAGLFLEXA.
    4. Save it & activate. If you need it to be delta enabled then click over Delta & you can choose accordingly.
    If you still face some problem then do mail me at [email protected]
    Assign points if helpful
    Regards,
    Himanshu

  • What are the data sources for 0FIGL_V10 cube Balance Sheet and Profit& Loss

    What are the data sources for 0FIGL_V10 (G/L (New): Balance Sheet and Profit and Loss) cube. and whether we can install business content regarding this.
    Please help me out.
    thanks,
    sapsdnhelp

    Hi,
    Check this:-------
    Urgent: Relevant Master Data Data Sources for FI-GL  & FI-AP
    http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
    Regards,
    Suman
    Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM

  • Data source for Deposit Advice (XML) and Live CheckWrite (XML) reports

    Hello All,
    We need to customize the Deposit Advice (XML) and Live Check Write(XML) reports to accomodate a few business requirements. We already have customizations for these reports in non-XML versions. For Ex: USPAYPST.rdf for Deposit Advice report. As these non-XML RDF reports are going to be unsupported by Oracle soon, we need to customize the XML versions of these report available in R12.1.3.
    As these reports are kicked off by the PYUGEN spawned program, therefore I need information on the data source for these reports as soon as possible.
    Looking forward to your prompt help.
    Thanks,
    Rahul

    Now, I have anew problem here. I modified the USPAYPST.rdf report for Deposit Advice and then changed concurrent program output to XML from Text.
    I attached a RTF template to the concurrent program to have the output in XML.
    When I run Deposit Invoice Report from the SRS window, it finishes off normally and log file says the number of records processed but no output file is generated.
    I also tried looking into the XML generated through View XMl and there too no output file is generated.
    I am confused if the Deposit Advice program can only generate Text output. As PYUGEN is the executable for this report, I have no idea if XML file can even be generated.
    All pointers to this issue are welcome.
    Thanks,
    Rahul

  • Data source for deposit advice xml and check writer xml

    Could someone please tell me where I can find the data source for the Deposit Advice XML and Check Writer XML programs. Since these executables are now a spawned process (PYUGEN), I don't know how to get to the data source. I was able before to look at the queries in PAYUSPST.rdf and PAYUSCHK.rdf. Where are these queries located now? Any help is appreaciated.

    Hi All,
    I applyied the patch 6399100 and i got the seeded Check Writer (XML) and Deposit Advice (XML) programs.Im able to run the Check Writer (XML) with Parameter (Check Style :Seeded Archive Check Writer Template ) but where as the im unable to run the Deposit Advice (XML) due to Error msg: "No enties found for list of vales"for the 'Check Style' Parameter.
    And for the above (only for Deposit Advice) i am not able to ecexute the SQL script given in the Doc ID : 459306.1 due to the error msg : cannot insert NULL into ("HR"."PAY_REPORT_CATEGORIES"."REPORT_GROUP_ID") if i see query the select * from apps.pay_report_categories where short_name like 'ARCHIVE%' there is no record exixts for ARCHIVE_DEPOSIT....
    for this we required any other patch/setups.
    And is the "Third Pary Check" will support XML Publisher ??
    Any respose will be greatly appriciated.
    Thanks,
    Madhu
    Message was edited by:
    user589951

  • How to find unsued Transfer Rules and Data Sources for a Master Table...??

    How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use

    Hi
    Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
    Cheer
    Ans as expected, Please reward

  • For forum: re: Tools Options Network Offline Web Content and User Data, see Details below, thanks in advance!

    For forum: re: Tools>Options>Network>Offline Web Content and User Data, (Help) says in part, '..If you have previously blocked a website from storing data for offline use..', If this refers to the times I have 'denied' a web service from storing data on my machine, then something is wrong. I have 'denied' many such requests, yet there is nothing in the box (Exceptions) 'Offline Data'. Why is there nothing in the box, and/or how do I manually add a service to the 'blocked' box? For me, this is a real problem as I have spent as much as 5 minutes clicking on the little 'Deny' box in the request before it goes away and allows me to watch the video I wanted to watch (the little 'request' box sits right in the middle of the video box, blocking viewing of the video). Is this a problem with Adobe Flash Player Settings (whos 'request' box it appears to belong to) or a problem with the Firefox> Tools (Local Storage) settings? (a picture of this 'request box' available on request)

    Note that Offline Web Content is different then local DOM storage and is only used on a few websites that run an application like the mega.co.nz website.
    You can inspect and manage the permissions for all domains on the <b>about:permissions</b> page or for the domain in the currently selected tab via these steps:
    *Click the "Site Identity Button" (globe/padlock) on the location bar
    *Click "More Information" to open Page Info
    *Go to the Permissions tab
    *Tools > Page Info > Permissions
    *https://support.mozilla.org/kb/how-do-i-manage-website-permissions
    You can delete the permissions.sqlite file to reset all permissions.

  • AE 5.2: Using Database as  User Data Source

    Hi all,
    we have a problem connecting our User Data Source, which is basically just a DB accessible via SQL, to Access Enforcer 5.2 SP08.
    To my knowledge AE only supports LDAP, SAP, SAP UME and SAP HR, none of which will be able to extract the data from our data source.
    Is there a way of directly mapping the DB fields with our user data to the AE request fields (like the LDAP mapping, but without using the LDAP protocol)?
    Would there be a workaround like attaching the UME to an external database? SAP Help only refers to the following sources:
    "UME can use the following types of data sources: Database of the AS Java, Directory service, User management of the AS ABAP"
    If so, would this also work with a dual stack system (ABAP&JAVA)?
    Thanks,
    Daniela

    Hi,
    I'm not sure of all the complexities around this but we had a similar problem where the user respository we used could not be connected using LDAP.
    The solution that was implemented was to create an ADAM (Active Directory Application Mode) directory, which is connected to the user repository - ADAM is then connected the UME for AE as the LDAP server.
    Probably not the most elegant solution, but we have been using this in  PRD environment for a couple of months now without any performance issues.
    Unfortunately I don't have all the details to guide you through all the config that was required, but perhaps you could investigate this as an alternative solution.
    Regards

Maybe you are looking for