Access error: Authorization check??

Dear all;
I have just implemented the portal, and currenty Im checking it; I wen to "System Administration" -> "Support" -> "SAP application" -> "Transaction" and then enter SE16 and test it, but it sends an exception. When seeing the monitor, the exception looks like this:
"ACCESS.ERROR: Authorization check for caller assignment to J2EE security role sap.com/com.sap.lcr*sld : LcrInstanceWriterLD referencing J2EE security role SAP-J2EE-Engine : administrators ."
I cant figure out why this is happening, because I have the administration role along with SAP_SLD_ADMINISTRATOR group??
Any help will be greatly appreciated!
Fede

Hi Siva,
What permissions should have the role 'Everyone'? In the Portal useradmin --> Identity Management, the role 'Everyone' doesn't have any 'Assigned Actions'.
Also, I should mention that I have used 'Support Desk Tool' to check the system and the status is green, so I think the configuration is ok. However, with 'DiagTool' I received this messages:
- Warning J2EE_GUEST SAPEngine_Application_Thread[impl:3]_31 ~urity.authentication.loginmodule.ticket no authscheme found that has auth template evaluate_assertion_ticket
- Error J2EE_GUEST SAPEngine_Application_Thread[impl:3]_4 ~engine.services.security.resource.audit ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [keystore-view.TicketKeystore : view-actions : GET_VIEW : ALL ].
- Error J2EE_GUEST SAPEngine_Application_Thread[impl:3]_4 ~engine.services.security.resource.audit ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [keystore-view.TicketKeystore : view-actions : IS_VIEW_EXISTS : ALL ].
- Error J2EE_GUEST SAPEngine_Application_Thread[impl:3]_4 ~engine.services.security.resource.audit ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [keystore-view.TicketKeystore : view-actions : VIEW_ALIASES : ALL ].
- Error J2EE_GUEST SAPEngine_Application_Thread[impl:3]_4 ~engine.services.security.resource.audit ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [keystore-view.TicketKeystore : entry-actions : LIST_ENTRY : ALL ].
I don't know what more I can do...
Best regards,

Similar Messages

Too many exception"ACCESS.ERROR: Authorization check"

We found there are too many Exception "ACCESS.ERROR: Authorization check for caller assignment to J2EE security role" occur in our Portal System with a 10 seconds interval after checking the defalutTrace file. Can anyone help us to resolve the problem?
thanks in advance.
Date : 10/29/2007
Time : 15:29:58:057
Message : ACCESS.ERROR: Authorization check for caller assignment to J2EE security role [service.jms.default.authorization : administrators] referencing J2EE security role [SAP-J2EE-Engine : administrators].
Severity : Error
Category : /System/Security/Audit/J2EE
Location : com.sap.engine.services.security.roles.SecurityRoleReference
Application : sap.com/irj
Thread : Thread[Thread-54,5,SAPEngine_Application_Thread[impl:3]_Group]
Datasource : 1193643286133:/usr/sap/EP0/DVEBMGS00/j2ee/cluster/server0/log/defaultTrace.trc
Message ID : 001125C013B40061000030D50071607A00043D9CAAE34B57
Source Name : com.sap.engine.services.security.roles.SecurityRoleReference
Argument Objs : ACCESS.ERROR,service.jms.default.authorization,administrators,SAP-J2EE-Engine,administrators,
Arguments : ACCESS.ERROR,service.jms.default.authorization,administrators,SAP-J2EE-Engine,administrators,
Dsr Component :
Dsr Transaction : 0c229a6085c811dc8856001125c013b4
Dsr User :
Indent : 0
Level : 0
Message Code :
Message Type : 1
Relatives : /System/Security/Audit/J2EE
Resource Bundlename :
Session : 3572
Source : com.sap.engine.services.security.roles.SecurityRoleReference
ThreadObject : Thread[Thread-54,5,SAPEngine_Application_Thread[impl:3]_Group]
Transaction :
User : J2EE_GUEST
Date : 10/29/2007
Time : 15:29:38:017
Message : ACCESS.ERROR: Authorization check for caller assignment to J2EE security role [SAP-J2EE-Engine : administrators].
Severity : Error
Category : /System/Security/Audit/J2EE
Location : com.sap.engine.services.security.roles.SecurityRoleImpl
Application : sap.com/irj
Thread : Thread[Thread-54,5,SAPEngine_Application_Thread[impl:3]_Group]
Datasource : 1193643286133:/usr/sap/EP0/DVEBMGS00/j2ee/cluster/server0/log/defaultTrace.trc
Message ID : 001125C013B40061000030C70071607A00043D9CA9B17F21
Source Name : com.sap.engine.services.security.roles.SecurityRoleImpl
Argument Objs : ACCESS.ERROR,SAP-J2EE-Engine,administrators,
Arguments : ACCESS.ERROR,SAP-J2EE-Engine,administrators,
Dsr Component :
Dsr Transaction : 0c229a6085c811dc8856001125c013b4
Dsr User :
Indent : 0
Level : 0
Message Code :
Message Type : 1
Relatives : /System/Security/Audit/J2EE
Resource Bundlename :
Session : 3570
Source : com.sap.engine.services.security.roles.SecurityRoleImpl
ThreadObject : Thread[Thread-54,5,SAPEngine_Application_Thread[impl:3]_Group]
Transaction :
User : J2EE_GUEST

Hi Jan,
I have implemented these patches usage Type EP.
CAF 13.1
SAP-JEE 13.1
SAP-JEECOR 13.3
SAP_JTECHF 13.1
SAP_JTECJS 13.1
UMEADMIN 13.2
Take a look at:
Support Packages and Patches -> SAP NetWeaver -> SAP NETWEAVER -> SAP NETWEAVER 7.0 (2004S) -> Entry by Component -> Development Infrastructure
Uwe

ACCESS.ERROR: Authorization check for caller assignment to J2EESecurityRole

Hi
After updating our portal (NW04 SP20) this new error occurs in the default.trc log.
<i>ACCESS.ERROR: Authorization check for caller assignment to J2EE security role [service.jms.default.authorization : administrators] referencing J2EE security role [SAP-J2EE-Engine : administrators].</i>
I have not found anything helpfull thusfar.
Thank you for your help in advance

Hi,
We had the same problem after upgrading to 2004s sp13.
We applied all available patches and it went away.
Check out this thread:
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=614693&tstart=0">https://www.sdn.sap.com/irj/sdn/thread?threadID=614693&tstart=0</a>
Best regards,
Avisahi Zamir

Error :Authorization check for caller assignment to J2EE security role whil

Hi Experts,
i m working as a portal resource .
after the deployment of standered Sap e-rec package .
i m getting some error. i have assigned the recruiter role to one test user.
Now i m getting two issue:
1)All the services are appearing in Detailed Navigation Pannel but not in Portal content area..
2) I m able to see few iview for the test user but those are also in detailed navigation view.
And few ivews are giving following error :
i)Internal error
ii)error 2011-12-19 07:59:57:315 ACCESS.ERROR: Authorization check for caller assignment to J2EE security role [sap.com/com.sap.lcr*sld : LcrInstanceWriterNR] referencing J2EE security role [SAP-J2EE-Engine : administrators].
/System/Security/Audit/J2EE com.sap.engine.services.security.roles.audit n/a EP-DEV-KRT Server 0 0_97989
Full Message Text
ACCESS.ERROR: Authorization check for caller assignment to J2EE security role [sap.com/com.sap.lcr*sld : LcrInstanceWriterNR] referencing J2EE security role [SAP-J2EE-Engine : administrators].
please suggest what can be done or what is pending from my side.

Prajakta2602 wrote:
Hi Experts,
>
> the previous issue got solved..
> it was due to servies pack miss match and applying notes
> the Basis guy checked the SLD logs and accordingly found that the base components J2EECORE and JTECHS required paching as per
> notes 1445294 and 1175239 were applied.
> now the issue is:
>
>
> After implemetation and i assigning the standerd sap roles
> 1)Recruiter Administrator
> 2)Recruiter
> to the test user .
> but for few iview it is showing error as in
> 1) you are not a authorized user
> 2) internal error
>
> please help experts.
>
> i m working on portal side have i to assign any role to that test user..
>
>
> Thnaks & Regards,
> Prajakta
You can run a quick check using the below steps:
1. Check in backend whether there is any authorisation errors... you may use transactions SU53 or ST22 for any ABAP errors
2. Also check in NWA -> log viewer -> last 24 hours log for the particular user to see any java related issues.
Regards,
Mahesh

ACCESS.ERROR:[service.jms.default.authorization : administrators].

Hi ,
I am configuring the launchpad in quality inspector package. I am getting the below error when i run some of the reports
ACCESS.ERROR: Authorization check for caller assignment to J2EE security role [service.jms.default.authorization : administrators].
I have checked note 971249 and added the user accessing the content to the service.jms.default.authorization in the security provider in Visual Admin. But still the error persists.
Appreciate if some one can give some pointers.
Regards
PN

please check
<a href="https://www.sdn.sap.com/irj/sdn/thread?messageID=4353963#4353963">https://www.sdn.sap.com/irj/sdn/thread?messageID=4353963#4353963</a>
Regards,
Philipp
PS: Please reward points if helpful

PureFTPd Access error

I have a collegue who has no IT support and want to know how he can get around this situation:
He has a Macmini running OSX 10.8.3 and he is trying to set up a new FTP user on his PureFTPd manager.
When he accesses the program he gets this error.....can anyone suggest a solution?

Hi,
Installing the new patches resolved the same issue for the other users. Check the below thread:
Too many exception"ACCESS.ERROR: Authorization check"
Rgds,
Raghu Boddu

Fast User Switching-- Disk Access Error

I have created a Standard User Account with no Parental Controls. I have not had any problems whatsoever logging in to iVisit (video conferencing) as an Admin, but when I log into the Standard account, and try to log into iVisit (using the same log in information as my Admin account, and this is what iVisit suggests I can do) I get the following error message when I click the log in button:
Disk access error. Check free space and write permissions.
I've tried logging out of my Admin account first, then logging into the Standard account before I try iVisit, but that didn't work. I've opened up the Standard account as much as possible (I think) to remove any restrictions, and even selected the option to allow user to administer this computer, but that didn't work either.
Another piece to this puzzle, is that iVisit Help suggested that I install iVisit under the Standard User, just to be safe. But during the install process, the installer quits, and I get an error message that says it can't continue.
Does anybody know what's going on? I really appreciate any help! Thanks
Powerbook G4 1.33 Mhz Mac OS X (10.4.3) External OWC, 512 RAM, iSight

I don't know anything about iVisit, but it sounds like it may not be behaving exactly as an OS X installer should — placing files in spots that only admins can access. I would try this as a next step:
1. Uninstall iVisit.
2. Make your standard account an admin.
3. Try and install iVisit through the newly admin'd standard account. Hopefully this avoids the error/crash.
4. Confirm that iVisit works through this account.
5. Switch it back to a standard account and test again.
I don't know if this will fix your problem, but it's worth a shot and may help narrow down the cause of the problem.

Document search error in webshop(Error in authorization check: user unknow)

Hi All
actually we have implemented the document search functionality in webshop to access all the documents in webshop who have created order in the webshop.
actually when i am logging into the portal with userid "skumar" after that there was role called "Document Search" when i click that document search role then the document search will be opened, based on the selections in the selection criteria then the documents will be displayed generally.
actually come to my error when i select in the selection criteria "order acknowledgement" and i select the one more column called "period" after that i click the search button then i am getting the error as follows.
<b>Error in authorization check: user unknown.</b>
Can you please help me where to check the authorizations in the system for accessing the documents.
Regards
Sunil

Hi Sunil generally this kind of error will occur when you choose acknoledgement
for Future Periods,eventhough input is past date if the same problem occurs you should check for Su05 Internet USer authoriasations
Reward if helpful
Venkat

ACCESS.ERROR#service.jms.default.authorization Errors

Hi,
With standart installation, following errors are filling defaulttrace contiuosly, any idea?
#1.#0050568817F2005E000003B00000706600044473E94477A8#1201164532348#/System/Security/Audit/J2EE#sap.com/irj#com.sap.engine.services.security.roles.SecurityRoleReference#Guest#240####86dd8e50ca5511dcc5540050568817f2#Thread[Thread-60,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error#1#com.sap.engine.services.security.roles.SecurityRoleReference#Java###: Authorization check for caller assignment to J2EE security role [ : ] referencing J2EE security role [ : ].#5#ACCESS.ERROR#service.jms.default.authorization#administrators#SAP-J2EE-Engine#administrators#

Hi Huseyin
Implement the latest patches available in market place.
For eg: CAF 13.1
SAP-JEE 13.1
SAP-JEECOR 13.3
SAP_JTECHF 13.1
SAP_JTECJS 13.1
UMEADMIN 13.2
or give eu_role to the user
Hope this helps
Satish Kumar.

Error for customer specific Authorization check (User Exit)

Dear Experts,
I am facing a problem in PM.
I have created a maintenace plan for calibration via t code IP42 and mentioned the order type PM05. Scheduling is done for the order. I got the order number.
I have released the order and got the inspection lot number.
While entering the results recording through t code QE17, the reluts are out of the specified range, i have given the valuation Rejected, immediately system is giving an error message as below:
"Error for customer specific Authorization check (User Exit)"
Though there is no user exit activated in the system, this message is coming and not allowing the result recoring for rejection.
If I'm entering the result recording within the specified range, then valuation is Accepted and its allowing to save.
I have checked the following user exits:
QQMA0002: QM: Authorization Check for Entry into Notif. Transaction
QQMA0026: PM/SM: Auth. check when accessing notification transaction.
The above 2 User Exits are not active.
I have also checked a note 429066. But it says incase of any dump for that user exit only its applicable and more over the current version of the system is ECC 6.0 packae 15, where as that note is applicable upto 4.6C.
Please some one help me on this issue.
Thanks and Regards,
Praveen.

Dear Pete,
I have cheked with my technical team, There is no hotpacks updated recently. This is the implementaion project I'm in, so performing the cycle for the first time.
Any how I got it solved, in T code QE17, after entering the Inspection lot in next screen goto menu path Settings - User settings - Defects recording mention the reprt type and tick on Reprt type Changable.
At the time of result recording if the valuation is Rejected then it ask for defects recording close that window if not rwequired then save, the error message no longer apperaing now.
Regards,
Praveen

Web Composer Admin Customization:'Authorization check failed' error

Hi,
The purpose of Web Composer Admin Customization is to enable the administration link in the UI pages so that the administrator will be able to customize the pages.
The steps to be followed to enable admin customization in the required pages are given in the following link under the subheading 'Web Composer Admin Customization':
https://stbeehive.oracle.com/teamcollab/wiki/Fusion+Applications+Technical+Architecture:Enabling+Customizations
I ensured that:
The jazn-data.xml file has a privilege role "FND_VIEW_ADMIN_LINK_PRIV", and a grant to access the admin menu.
A duty role "FND_ADMINISTRATION_LINK_VIEW_DUTY" had been defined, and was a member of FND_VIEW_ADMIN_LINK_PRIV.
The FND_ADMINISTRATION_LINK_VIEW_DUTY is inherited by the administrator enterprise role.
A new privilege role (Customize <Family> UI) had been created.
I then granted the 'customize' and 'personalize' actions on the pages and the corresponding task flows (for which customization had to be enabled) to the new privilege role.
Also, ensured that:
A new app role (Customize <Family> UI) was created and was a member of the new privilege role. The app role was inherited by the administrator enterprise role.
The testing administrator role has both the administrator enterprise role and the enterprise role that has view access to the page.
Now, when i tried to run one of the pages (for which customize and personalize actions were granted to the new privilege role) from JDeveloper, i got the following error:
oracle.adf.controller.security.AuthorizationException: ADFC-0619: Authorization check failed: 'oracle.jbo.uicli.binding.JUFormDef@d94f3e' 'VIEW'.
at oracle.adf.controller.internal.security.AuthorizationEnforcer.handleFailure(AuthorizationEnforcer.java:180)
at oracle.adf.controller.internal.security.AuthorizationEnforcer.internalCheckPermission(AuthorizationEnforcer.java:160)
at oracle.adf.controller.internal.security.AuthorizationEnforcer.checkPermission(AuthorizationEnforcer.java:114)
at oracle.adfinternal.controller.state.ControllerState.checkPermission(ControllerState.java:632)
at oracle.adfinternal.controller.state.ControllerState.initializeUrl(ControllerState.java:669)
at oracle.adfinternal.controller.state.ControllerState.synchronizeStatePart2(ControllerState.java:447)
at oracle.adfinternal.controller.application.SyncNavigationStateListener.afterPhase(SyncNavigationStateListener.java:46)
at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.afterPhase(ADFLifecycleImpl.java:531)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchAfterEvent(LifecycleImpl.java:120)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchAfterPagePhaseEvent(LifecycleImpl.java:168)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchAfterPagePhaseEvent(ADFPhaseListener.java:124)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:70)
at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:398)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:185)
When i granted the view action on the page ( in addition to the customize and personalize actions) to the new privilege role and ran the page from JDeveloper, the page came up fine but the administration link that is supposed to appear was not seen.
Can any of you please provide suggestions regarding the cause of the above error and how i should go about debugging it.
Thanks,
Rohan

Posted it in the forum suggested by Frank.

Direct database data access without data level authorization check

Hello,
My customer raised issue about direct database data access. Due to the customeru2019s strong security policy, it shouldnu2019t be allowed.
To prevent this kind of illegal data access, customer ask me to list up all the possibilities to display data without data level authorization check.
The things in my mind are
SQL Command Editor (for Oracle based system) : ORASPACE, DB02, ST04
Query Based : SQVI (Quick Viewer), SQ01/SQ02/SQ03 (SAP Query)
Data Browser : SE11, SE12, SE16, SE16N, SE17
Table Maintenance : SM30
Function Module : RFC_READ_TABLE
Function Module : DB_EXECUTE_SQL (DML)
Anyone knows anything which is not listed above?
Thanks

HI,
Generally in production user's should not be given all these authorizations.
Ram.

Trying to access an epub book downloaded from local public library on my PC laptop with windows 8.1. I keep getting Error!Check Activation. My ID has been authorized, how do I fix this?

Trying to access an epub book downloaded from local public library on my PC laptop with windows 8.1. I keep getting Error!Check Activation. My ID has been authorized, how do I fix this?

Trying to access an epub book downloaded from local public library on my PC laptop with windows 8.1. I keep getting Error!Check Activation. My ID has been authorized, how do I fix this?

ERROR! CHECK AUTHORIZATION!

I keep getting a message that says Error! Check Authorization! when I try to transfer from My Digital Editions to my Nook Tablet. Any help would be appreciated.

This doesn't work for me (Win7, Digital Edition v. 4.0.3). I am trying to open epub files with the .acsm extention on a Nook Reader.. Under Help it says the computer is Authorized; when I erase the Authorization it says it's been erased and I close for program (in order to re-authorize). When I reopen the Digital Editions and try to Re-authorize, everything seems to work until I try to open a book and then I get the Error: Check Authorization message.

An internal error occurred during the authorization check.

Hi,
Need help,
While deleting chain in order to create Meta chain.I am getting this Error message.
Thanks

Hi,
I am creating a meta chain.When i am trying to add local chain in it.Through general services tab >> start process.A dialog box appears asking me to delete one of the chain and the other one will act as both.When i am clicking yes then i am getting this msg.
An internal error occurred during the authorization check.
Edited by: Niraj Sharma on Aug 12, 2009 11:19 AM

Access error: Authorization check??

Similar Messages

Maybe you are looking for