Access files on mac-mini from external hard drives hooked to PC...

Have two external hard drives hooked up to my PC. I am in the process of daisy-chaining (via firewire cable) from the one external-Hrd-Drv (only one that has firewire input) to my MAC-MINI. APPLE STORE REP says it will pick up BOTH hard dirves (through a "daisy-chain" -like cycle) and that their icons will just pop-up on my mac-mini. So, it's all hooked up and then I clicked over to the mac-mini and there's NOTHING. Both hard-drive icons are no where to be found! There still ONLY found on my PC, of course. Once a again, I was told that my mac-mini would pick-up or access both hard drives from my PC by JUST using a firewire cable! I've done that and I'm having no such luck. Is there a way to do this? Please Help...thanks!

Can you re-state exactly what drives are connected to which computers, and how?
An external hard drive plugged into a PC (or, indeed, even another Mac) on your network will not automatically "show up" on your Mac mini, no matter whether it's USB, Firewire or what. The only way you can even connect to it from the Mini would be to share it out from the PC as an SMB/CIFS (Windows file sharing) share across the network.
Matt

Similar Messages

How do i move files from mac mini to external hard drive

how do i move files from mac mini to external hard drive

The simplest method would be to drag & drop the files you want to move to the external drive using the Finder. Just open both the source and destination locations in separate Finder windows.

Back up files from Mac Mini to external hard drive

how do I back up the files and pictures to External Hard Drive before i Install the newer OSX Snow Leopard. current OSX is Leopard 10.5.8
any Helpful Tips and Tricks will be appreciated in basic step by step which I am not a Mac Expert.
Thanks!
Jay

Disk Utility can make a bootable copy of OS X onto a properly formatted External HD, but I prefer to use Carbon Copy Cloner because it is easier. Plus not only can you boot from the clone if you run into trouble, but you can continue to use it as part of your normal backup strategy.

Using Mac mini as External Hard Drive for time machine

I know this can be done but I am not sure how. How can I set up a mac mini as an external hard drive. Can this be used as a drive for time machine?? Any help is appreciated, Thank you.

Personal file sharing (which may require Leopard on the Mini) or by connecting the Mini to your other Mac via Target Disk Mode. I wouldn't recommend that latter, though; too much chance of inadvertently erasing files critical to the operation of the Mini.

How do I import music files to new computer from external hard drive containing them

Have an older computer(G5 iMac) with Tiger 10.4.11 and iTunes that crashed. Have that computer and older version of iTunes residing on an external hard drive. I want to import music to new comptuer with newer version of iTunes. External hard drive is partitioned with just iTunes section. Any one done this before?

If you want to use the old iTunes library that you have from the ext HD then just drag the iTunes folder to the new Mac.
By default the iTunes folder Is Located - HD>Users>Your Account>Music>iTunes - if the internal HD has no iTunes library then just replace the iTunes folder with the one from the ext HD.
Launch iTunes with the 'option' key down and point iTunes to the iTunes Library that you want to open. It will remember the next time.
MJ

How to send files back to TC from external hard drive quickly?

Hi,
I have just archived 500gb of my TC to external hard drive which was directly connected to TC. I have replaced failing hard drive in TC on 2GB (£50) and reformated gain. Now is ready to be used. Then I wanted to put archive files back onto TC from that external hard drive which is directly connected to TC. The problem is that when I was archiving it files where send directly from TC to external hard drive and it took approximately 5 hours to do it. Now to reverse all that taking about 5 days because for some stupid reason hard drive is sending all that files through my desktop and back to TC again.
Is there any faster way to do it?

A: you DONT modify your TM backup, youd just add files into the same HD, however thats no good because........
Youre trying to create a nasty choke point for data failure by putting time machine AND your files on ONE DRIVE,
very bad idea, hard drives are cheap as dirt, buy another, 2 MINIMUM external redundant backups of your vital data, period.
also, cloud isnt a place for data archives, and not safe, not secure.
The Tragedy that will be, the tragedy that never should be
Always presume correctly that your data is priceless and takes a very long time to create and often is irreplaceable. Always presume accurately that hard drives are extremely cheap, and you have no excuse not to have multiple redundant copies of your data copied on hard drives and squirreled away several places, lockboxes, safes, fireboxes, offsite and otherwise.
Hard drives aren't prone to failure…hard drives are guaranteed to fail (the very same is true of SSD). Hard drives dont die when aged, hard drives die at any age, and peak in death when young and slowly increase in risk as they age.
Never practice at any time for any reason the false premise and unreal sense of security in thinking your data is safe on any single external hard drive. This is never the case and has proven to be the single most common horrible tragedy of data loss that exists.
Many 100s of millions of hours of lost work and data are lost each year due to this single common false security. This is an unnatural disaster that can avoid by making all data redundant and then redundant again. If you let a $60 additional redundant hard drive and 3 hours of copying stand between you and years of work, then you've made a fundamental mistake countless 1000s of people each year have come to regret.

How to use mac mini as external hard drive

trying to wipe an old mac mini and use as external hard drive for my iMac. Help!

Connect them with a FireWire or Thunderbolt cable and start up the Mac mini with the T key held down. If desired, use the Disk Utility in the /Applications/Utilities/ folder to erase it.
(86231)

MOV. files will not import from external hard drive to iMac.

Do I have to convert MOV files somehow to be able to import them into an iMac from an external hard drive?
The files were moved from MacBookPro to hard drive. They play fine on external hard drive but won't import into iMac which says file format not recognised.

The file plays on my desktop and from the external hard drive, but I converted one file to an MP4 which then imported to iPhoto. Any recommendations on how to convert to MP4 files in bulk?

Files cannot be located from external hard drive.

I just moved all my iTunes content to my laptop from my external hard drive (that I had been previously using with my PC), thinking it would be available on both as long as I had the Hard Drive plugged in. When I got downstairs however, I found that none of the songs could be located on the PC from the external hard drive, even though I had it plugged in. How do you solve this?

Then I tried to fix the problem by dragging my music from my external, to my iTunes but stopped it when I realised I was going to have a whole iTunes full of duplicates. (still got like 80 though )

Moving files from mac mini to external hard drive

I am trying to move some files off an iMac onto a FREECOM HDD. (external Hardrive) When I attempt to drag the files off the mac into the hardrive window, I get the error message:
"File" could not be moved because " FREECOM HDD "cannot be modified
This is also the case with a Mac mini that I have. Files can be dragged off the hardrive into a finder window but not the other way round. This is frustrating as I can move files between PC laptop and hardrive without any error messages.
Im guessing that my permissions on mac systems are read only, but I dont know how to change them. Im desperate to get some old photos off the iMac onto the hardrive and would really appreciate any suggestions.
Thanks kindly

Hi
I installed the NTFS-3G drive on my mac mini. It has worked, i can now transfer files to the hardrive.
Im still having trouble with my iMac.
NTFS-3G drive requires minimum requirements of mac osx 10.4 operating system. Unfortunatley my G4 iMac is running Panther, version 10.3
I tried installing Tiger, version 10.5 off the install discs but got the following message:
"Mac os x cannot be installed on this computer
This software cannot be installed on this computer"
how can i solve this problem?
Many, many thanks

Problem importing from 64 GB Lexar USB card in LR4 on Mac Mini with external hard drive.

Initiated import after deselecting some images. Import was super quick and I was suspicious as the stick had over 40GB of images. Progress bar indicated completed import. Later when I went to process images the Library module indicated that the files were "missing". Eventually I noted that the images were still listed as on the USB stick and had not been imported - though it seems they were imported into the catalogue and listed there with the thumbnails. Luckily I had not erased the USB stick. How do I avoid a repetition of this scenario? What should I do to complete the import? Should I delete the original and delete from Catalogue and start over again? This happened once before and I lost some good images when the progress bar erroneously (?) indicated completed import. Obviously I did something wrong.

As Rikk Flohr has already suggested, you must have selected <Add> (in the top center of the Import Dialog - although in Lr 4.3 this option is not any more available when importing from card).
<Add> is for importing images that are already on the hard drive and you do not want to change their location.
<Move> is for importing images that are already on the hard drive and you do want to change their location.
<Copy> is for importing images from camera / memory card.
You saw the progress bar when you imported. But that does not necessarily mean that your images have been copied to the hard drive.
Importing from memory card / stick / camera involves a two-step process:
a) the images are copied to the hard drive;
b) the images are referenced in the catalog.
In your case it seems that only (b) happened. Thus you get the message that the images (i.e. the image files) are missing once you removed the memory stick.
To correct this: Move the images via your OS (Mac Finder / Win Explorer) to a location where you want your images to be.
Then in Lr re-link the catalog reference with the images files. You do this by right-clicking the folder in question in the folders panel (it should have a question mark in front of the folder name) and selecting <Update folder location> or <Find missing folder>. Navigate to the location of the folder and select it.
For more on re-linking missing images / folders see here:
http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm
http://tv.adobe.com/watch/creative-suite-podcast-photographers/lightroom-dude-where-are-my -photos/
Important:Do not re-import the photos. Re-importing photos that are already in the Lr catalog creates problems.

How to reinstall Mac apps from external hard drive onto Macbook

Last week I spilt wine on my 2009 Macbook6.1 and couldn't revive it so I brought it into the Mac Dealer in town and had it fixed. Gee! I just upgraded the external 250gb hard drive with a Hot Seagate Momentus 500gb hybrid SSD. well it wasn't too bad. Replaced some plate(forgive my lack off computer knowledge) of a sort and wiped everything down with alcohol including the new HD and all was good. Then the techy moved all of my personal stuff over to my LaCie external HD, wiped my internal HD clean and reinstalled Snow Leopard OS X. All done. When I got home with it and started it up I couldn't find the iLife app that it came with when bought new at Apple Store or iWork which I bought later at Apple Store and installed myself. I just bought and installed Lion OS X too. Right here and now I have my LaCie external connected to it and have no clue how/what to do to get iLife apps and iWork and other stuff back into Macbook. I need help. PS: how to check volume in Seagate hard drive?

There are basically two types of apps:
- one category requires to run an installer, e.g. iLife or iWork, they cannot be moved from one place to another; there are apps which, even having an installer, they practically may be moved from one place to another without any problem;
- apps which may be stored as such and moved to and external drive and back, and even may run from anywhere; most of Mac OS apps are like this.
If you want to backup your apps once purchased on CDs or DVDs, you may simply create images of them (dmg), and install them as if you had the CD or DVD. To have a backup of your apps is OK, and even recommended. This is how I store all my apps now, practically the optical drive is something I use extremely rarely.
If you purchased iWork via App Store, you may simpluy re-download them any time, by selecting apps and pressing Option / Alt key when selecting them, this will force a new download.

Hello, I'm Laura, italy, I apologize for my english, early just to use LR, but this morning I can not import photos, nor from a memory card, either from the mac nor from external hard drive, it tells me: Can not copy file in required path and below this w

help me

Hello Laura,
most comments which I know say, the best would be to copy all your photos into a directory (with corresponding subdirectories) by help of a file manager. From there LR should find all your photos.
Maybe these - from former LR versions - may help anyway:
http://help.adobe.com/it_IT/lightroom/using/WSE828B644-9097-46ab-98A7-E2719BBB6647.html
http://help.adobe.com/it_IT/lightroom/using/WSBED0E080-63AF-4ba4-ACCF-EC48C4F92D6D.html
And this (German advice) can help too (to translate shouldn't be a problem, or?)
http://www.lightroom-tutorial.de/2009-04/hier-wird-erklaert-wie-dateioperationen-direkt-in -lightroom-durchgefuehrt-werden-und-wie-fehler-korrigiert-werden-koennen/
Buona fortuna!
Hans-Günter

Can't See Files in Folder Copied from External Hard Drive to Desktop

I recently purchased a Jobo Spectator (portable image tank for storing photos). When I connect it (USB) to my iMac I see it and can copy files to my desktop. If I copy an entire folder from the device to my desktop, Finder tells me it contains 0 files and I can't see any files in it. However, if I try to recopy one of the copied files from the Jobo to the folder, Finder tells me the file already exists there and asks if I want to replace it. If I then cancel the copy, all of my copied files show up in the folder. This behavior seems to be consistent. There is no Mac driver for the device. It doesn't look like I'm going to lose any files from this behavior but I find it frustrating.
Does anyone have a clue? Thanks.

A warm welcome to the forums Sue!
The Finder is a bit lackadaisical about updating itself, you can click back & forth enough times, closing folders, opening folders and eventually it'll be in touch, or you can try something like "A Better Finder Attributes", for it's "force the Finder to update stale information about your files" feature.
http://www.versiontracker.com/dyn/moreinfo/macosx/18736
Possibly this would help too, but haven't tried it...
http://www.finderpop.com/

I can't transfer files from my mac to an external hard drive. what can i do?

i have tried to transfer files from my mac to my external hard drive but i just couldn't.. help me

leemamacita wrote:
i have tried to transfer files from my mac to my external hard drive but i just couldn't.. help me
More information would help. How is the external connected? Does the external appear on your Desktop? Has the external been formatted for a Mac? What method do you use to transfer files? When you try to move a file to the external, what does happen?

Access files on mac-mini from external hard drives hooked to PC...

Similar Messages

Maybe you are looking for