Access Files on My Samsung Continuum from my Mac
Hello,
How can I access my files on my Samsung Continuum from my mac computer?
Samsung says that my device cannot be mounted:
http://ars.samsung.com/customer/usa/jsp/faqs/faqs_view_us1.jsp?PAGE_GBN=faqs_search&SITE_ID=22&PG_ID=0&AT_ID=342136&PROD_SUB_ID=0&PROD_ID=561
Does anyone have any other ideas of how to download/access the SD card?
thanks,
Good morning andrewiskandar,
The Samsung continuum comes with an 8GB pre-installed microSD memory card. Is this the card we are working with? Also, if your Mac states that it accepts the card version that you posted, then you may need a memory card adaptor to the standard SD memory card format. Once you have the adaptor, the pc or Mac will recognize the memory card. On the pc, the card will come up as an add'l drive in "My computer". On the Mac, an icon will appear on the desktop to represent the memory card. Once the computers recognize the memory card, you can manipulate and transfer media on either platform. I hope I didn't overwhelm you with too much info.
Good luck...
Similar Messages
-
How do you access files on your time capsule from your mac?
how do you access files on your time capsule from your mac?
i had an old macbook pro that i had all the pictures on and i backed it up to my time capsule through time machine. i got a new macbook pro retina display recently and im wanting to see if i can get some of the pictures off of my time capsule now but i dont want all of them.
-
How to view and access files on my iBook G3 from another iMac
**Hello, everybody on this excelent forum. I need to know how to use my Firewire conection, to view and access files in my iBook G3, from another iMac G3, both are OK in working good condition. I put this question because some days ago a Mac expert fix to me the access in my recent SwapMeet second hand aqcired iMac G3, without the original last owner password.
this person are egoistic, and DoNot show me how he use the Firewire do this job.
Thank You: Eduardo from NorthWest Mexico.Hello, Niel, Thank You very Much for your fast and kindly responce.
the next monday I'll buy a new FireWire cable to test the metod you tell me.
Again thanks and best regards from NW-Mexico.
Eduardo -
My files in numbers spreadsheet disappeared from my mac and can´t be found in iCloud
I have similar problem. I updated Numbers. I cannnot see actual documents in iPhone and open it in iCloud. I can find them only in iPad.
-
i'm trying to access my new icloud email acct from my mac. I have OS 10.6.8 and have just completed a software update. But still not seeing how to install my icloud acct...?
You must upgrade your OSX to Lion (10.7) minimum, Mavericks (10.9) preferably.
-
Wanting to access iTunes library on our iMac from our Mac Book Pro
Hello - Can anyone help?
Wanting to access iTunes library on our iMac from our Mac Book Pro - home sharing is switched on and can play both via Apple TV but how do I copy a playlist from the IMAC library to my library on the Mac book pro.Hi Michael and thanks for your help.
I had worked out how to play the itunes library as I did find that page but I can't copy anything.
As soon as I click on Music (from the shared library on the Library-pop-up-menu) I get my husbands library which is good and we can play it. But we cant figure out how to copy and cant do step 2 (as per below) as we can't find the "Show menu at the bottom of the iTunes window, choose “Items not in my library.” Any further advice?
Many thanks...Elaine
Import items from other libraries using Home Sharing
Choose a computer on your Home Sharing network from the Library pop-up menu.The library loads and a list of categories appears.
Choose a category (Music, for example).
In the Show menu at the bottom of the iTunes window, choose “Items not in my library.”
Select the items you want to import, and click Import. -
Access specific files in the time machine from another Mac
I bought one mac air with less space than the mac pro backup that I have in the Time Machine, so I can't migrate the old mac to the new mac air. How can I Access specific files in time machine then? Thank you.
You can still get your files out of the TM backup..
There are several methods..
you can do it manually.
See Can't access old files on time capsule
You can also buy a USB drive large enough for the whole backup and simply restore the whole thing to that drive plugged into your computer.. you can then pick and choose what files you want. And at any time you want. Having files in their standard format and location is hugely easier than TM backups.
If you run into permissions issues there is a fair bit of help although a bit outdated in pondini KB.
So read through the info here..
Q14-17 on restore in particular. http://pondini.org/TM/FAQ.html
And check the troubleshooting for specific problems that can arise.
http://pondini.org/TM/Troubleshooting.html
Section E in particular.
You can pull the hard disk out of your Mac Pro.. that is not hard.. put it in a USB to sata holder and access files that way..
Overall this is what I would do anyway.. because you will not want to junk the computer with files intact.. pull the files directly off the old hard disk.
Let me also commend to you a different strategy in the future..
TM is great when it works.. sadly on every upgrade Apple make changes to it.. and cause utter chaos.
Buy a 3rd party backup software.. I use CCC and like it.. you create bootable clones of your Mac.. that means all files are readily accessible because you can literally boot directly from the backup.. or access the files because they are not hidden, compressed, rewritten in strange formats.. etc.
Recovery of a computer with a dead hard disk is 3min exercise where you hold the options key during boot and choose the backup disk.
You can continue to use TM for the incremental backups which it does very well.. but have the bootable clone as a way of accessing everything. From which you can then easily access the TM backup for whatever might be missing.. I do not do Clones on regular basis.. so it is slightly different method of doing things..
You can never have enough backups. -
Accessing files on boot camp windows partition and Mac OSx partition
Before I install Windows 7 64 bit on my iMac using Apple's instruction manual, I have a question. The manual states:
*+FAT—Provides better compatibility, allowing you to read and write files on the Windows volume from Mac OS X. This partition must be 32 GB or smaller.+*
*+If you’re installing Windows Vista or Windows 7, the Windows partition must use the NTFS format.+*
I can read, but I want to be sure I understand these two statements as they relate to each other. Because the Windows 7 partition must be NTFS format, does this mean that there is no way to read, write or copy files from one partition to the other, no matter what the partition size is?
If that is the case, I assume the best way to move files from one partition to the other would be to use a flash drive or is that also not possible due to the file format on the flash drive? I also have an external hard drive used for time machine. Any way to use that?
How will I move files from one partition to the other? And yes, I really want to do this.Hi,
ifarber wrote:
Hi Stefan --
Could you explain how using an external HD helps? If I wanted to use an external HD for read/write access from both Snow Leopard and Windows (XP and/or 7), would it need to be in a particular format? (No partitions - this would be a new, empty drive.) If, for example, I formatted it as NTFS, could OSX write to it if it were external?
Since I don't have/use files that are bigger than 4GB in size I am able to use FAT32 as file system on the mentioned external harddisk and flash drives.
Whether I use the harddisk or a flash drive for file transport depends for me on the amount of files I have to move.
Up to 8GB of files I move with a flash drive, everything above that I use the harddisk.
Stefan -
How can I open and copy files on the win side from the mac side?
I am working on the mac side and I need to be able to copy files from the mac side that I create over to the win side. I can open and view win files when I am booted to Snow Leopard, but I cant copy files to the win side. I think Macdrive does the opposite.
Any ideas?
thanks,
Cto write to Windows NTFS you need 3rd party.
You have read only access to HFS from Windows.
MacDrive8 works in Windows to add write to HFS as does Paragon. Paragon has what I have come to see as the best NTFS driver for OS X, and they have a separate HFS8 for Windows similar to MacDrive8.
Maybe you want to run Windows as a client OS using Parallels instead? -
.mov files and iMovie 9, moved from another Mac
hi
I moved many iMovie files from my Mac Pro (using iMovie 6) to an external FW drive. I then connected the ext. drive to my new MBP and launched iMovie 8.0.5. Not only will iMovie 8.0.5 not launch the projects as a movie, an error message states that many files are too large and the s/w quits. The files which I can import look very compressed as well.
I have just downloaded iMovie 6.0.3 onto my MBP.
Any suggestions as to what I should do in order to view my projects? Should I launch iMovie 6.0.3 and attempt to import the files there?
Thanks
Chuck S.Try an import the MOV files into iMovie 09 but make sure you turn OFF Optimize video.
Try that and see if it works. -
Unable to access files on Windows 7 computer from Windows 8.1 computer
I have a Windows 7 desktop and a Windows 8.1 laptop. Both connect wirelessly to the internet via my Home Hub. Because the desktop is my main repository of documents / pictures etc. I want to be able to access them from the laptop, but despite
spending ages surfing for assistance I can't manage to do this.
At this stage I'll cheerfully confess to being semi-PC-illiterate and totally confused about Network File Sharing, Homegroups and Workgroups!
One fundamental problem seems to be this - I can ping the laptop from the desktop but not vice-versa. That said, if I run Explorer on the desktop and click on Network, it displays both machines (and the hub). If I run Explorer on the laptop and
click on Network, it displays the laptop and the hub, but
not the desktop.
I'd be grateful if some kind reader could patiently suggest how I could diagnose and fix the problem!
Many thanks in anticipation.Hi,
We haven't heard from you for several days, Would you mind letting me know the result of the suggestions? If you need further assistance, feel free to let me know. I will be more than happy to be of assistance.
Please understand that Network discovery is a network setting that affects whether your computer can find other computers and devices on the network and whether other computers on the network can find your computer.
Please configure this settings to check this issue.
For your reference:
What is network discovery?
http://windows.microsoft.com/en-hk/windows/what-is-network-discovery#1TC=windows-7
We will wait for other several days and if there is no response, we consider that the issue is resolved and will mark as answered.
Kate Li
TechNet Community Support -
Asa 8.2 access files share on outside network from VPN Client.
please help me
I have cisco asa 5505 with 8.2
outside is 111.22.200.51
inside is 192.168.1.0/24 dhcp
vpnpool is 192.168.10.1-192.168.10.30
configured split tunnel to vpn client to access web
I was able to connect from outside via vpn.
Goal is access fileserver(on window) on 111.22.200.21 from vpn clients.
internal client can access the share folder
vpn client cannot access ther share on 111.22.200.21
============================
names
name 192.168.1.1 ciscogw
name 111.21.200.1 umgw
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
switchport access vlan 5
interface Ethernet0/4
interface Ethernet0/5
switchport access vlan 5
interface Ethernet0/6
switchport access vlan 5
interface Ethernet0/7
switchport access vlan 5
interface Vlan1
nameif inside
security-level 100
ip address ciscogw 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 111.22.200.51 255.255.255.0
interface Vlan5
no nameif
security-level 50
ip address dhcp setroute
ftp mode passive
clock timezone MST -7
clock summer-time MDT recurring
dns server-group DefaultDNS
domain-name vpn.nmecsc.org
access-list RAteam_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.10.0 255.255.255.192
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpnpool 192.168.10.1-192.168.10.30 mask 255.255.255.224
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 111.22.200.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
quit
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 192.168.1.5-192.168.1.50 inside
dhcpd dns 8.8.8.8 8.8.4.4 interface inside
dhcpd wins 111.22.210.65 111.22.210.61 interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl trust-point ASDM_TrustPoint0 outside
webvpn
enable outside
group-policy DfltGrpPolicy attributes
banner value WARNING: Unauthorized access to this system is forbidden and will be prosecuted by law. By accessing this system, you agree that your actions may be monitored if unauthorized usage is suspected.
group-policy RA_SSLVPN internal
group-policy RA_SSLVPN attributes
vpn-tunnel-protocol webvpn
webvpn
url-list value team
group-policy RAteam internal
group-policy RAteam attributes
wins-server value 111.22.210.65
dns-server value 8.8.8.8 8.8.4.4
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value RAteam_splitTunnelAcl
default-domain value vpn.nmecsc.org
username teamssl2 password 5ZBa0qXxwLBPpvoR encrypted privilege 0
username teamssl2 attributes
vpn-group-policy RA_SSLVPN
username team2 password 5ZBa0qXxwLBPpvoR encrypted privilege 0
username team2 attributes
vpn-group-policy RAteam
username teamssl1 password 5ZBa0qXxwLBPpvoR encrypted privilege 0
username teamssl1 attributes
vpn-group-policy RA_SSLVPN
username team1 password 5ZBa0qXxwLBPpvoR encrypted privilege 0
username team1 attributes
vpn-group-policy RAteam
tunnel-group team type remote-access
tunnel-group team general-attributes
default-group-policy RA_SSLVPN
tunnel-group team webvpn-attributes
group-alias team enable
group-url https://111.22.200.51/team enable
tunnel-group RAteam type remote-access
tunnel-group RAteam general-attributes
address-pool vpnpool
default-group-policy RAteam
tunnel-group RAteam ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
call-home reporting anonymous
Cryptochecksum:680b9059ca6ca6610857bab04d855031I just upgrade asa to 9.3
add access-list but still no luck. I attached the diagram.
name 192.168.1.1 ciscogw
ip local pool vpnpool 192.168.10.1-192.168.10.50 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address ciscogw 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 111.22.200.51 255.255.255.0
boot system disk0:/asa923-k8.bin
ftp mode passive
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network NETWORK_OBJ_192.168.1.0_24
subnet 192.168.1.0 255.255.255.0
object network NETWORK_OBJ_192.168.10.0_26
subnet 192.168.10.0 255.255.255.192
access-list ipsec_group_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list ipsec_group_splitTunnelAcl standard permit host 111.22.200.21
access-list ipsec_group_splitTunnelAcl standard permit 111.22.200.0 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-731-101.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_192.168.10.0_26 NETWORK_OBJ_192.168.10.0_26 no-proxy-arp route-lookup
object network obj_any
nat (inside,outside) dynamic interface
route outside 0.0.0.0 0.0.0.0 111.22.200.1 1
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl trust-point ASDM_TrustPoint0 outside
webvpn
enable outside
tunnel-group-list enable
group-policy ssl_vpn internal
group-policy ssl_vpn attributes
vpn-tunnel-protocol ssl-clientless
webvpn
url-list value carino
group-policy DfltGrpPolicy attributes
group-policy ipsec_group internal
group-policy ipsec_group attributes
dns-server value 8.8.8.8 8.8.4.4
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value ipsec_group_splitTunnelAcl -
Will one of these work to use software from iMac on any laptop wirelessly around the house? Which would be better Express or Extreme?
I've had much better luck with Express rather than the Extreme.
She can use "Sharing"
Apple - AirPort Express - Easy Setup
Mac 101: File sharing -
Access denied error message when switching from one Mac to another Mac
I use LR on a laptop and a desktop, both Macs running Yosemite. I use the same external drive to store my LR photo catalogs and move it back and forth between computers. If I import pictures on one computer I get a "file access denied" when in the Develop mode on the other computer. In other words, I can only use the Develop mode on the computer where the original download from my camera occurred. I cannot find a solution and would appreciate any help. I am running the latest versions of LR and OS X. Thanks.
Jim ~ These Apple docs may help:
_iWeb: Modifying your site from another computer_
iWeb: Publish to your MobileMe account from more than one computer
And this article:
http://iwebfaq.org/site/iWebTwocomputers.html -
Please help me unistall my old library and then sign back in to use my library in match as my hardrive has gone bang with everything in it.I can log in with a different user profile and stream and download items but it wont let me do it from my actual user account on my macbook. all i want to do is open itunes as with the other macbook guest log in and download all my music from match but do it with my existing user account.
help please!!iTunes menu Store > Sign out of iTunes Match the n Sign in to iTunes Match.
but it wont let me do it from my actual user account on my macbook.
Why not?
What happens?
Maybe you are looking for
-
Adobe Acrobat for the Mac OS does not inherit the setting from the PPD for the printer. Our current settings for the PPD has Duplex enabled as the default for the HP LJ 9050 and it works in all the application with the exception of Acrobat 10.1.3, Ac
-
Hi Is there any standard transaction code whereby you can list out attributes of the customer master data, say the address information, telephone numbers etc? Thanks
-
How to convert piano notation to alto sax notation?
I'm still new to Logic Express so bear with me. I've written a song with alto sax and I'd like to print the notation for a live sax player. However, the sax is a transposing instrument and reads the treble clef as Eb. Is it possible to change the key
-
Developer cannot connect to debugger. when I attempt to execute a procedure in a pcakage to debug it I get: Connecting to the database DBConnection1. Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE Executing PL/SQL: ALTER SESSION SET PLSQL_COMPI
-
Disk full error when download files f. music store w.itunes6
Hi I have my volume mounted over afp 64gb used 56 free and when i download songs from music store it says disk full. This only happens since itunes6 It works seamless when downloading to local drive. Any workaround for this nice new feature??