Access for output for PO failing
We are trying to get PO output based on vendor/material for PO type NB. The system is not finding the material that is stated in the PO. We have tried lots of combinations in the condition table and it just gives a ! on material. Any hints as to what we are doing incorrectly? Thank you!
Thank you. That is helpful information. The access table has material as a field but it definitely does not want to fill it in. Accounting has decided to get rid of an internal vendor number and have us use another internal vendor number for multiple company locations. The only way to get around that is by material number designation and since the same person would be entering these PO's that get shipped from various locations, multiple purchasing groups would not be a good solution. We think we will have to go back to accounting and ask for multiple vendor accounts so we can drive this output. It is disappointing that material is listed as an option.
Similar Messages
-
I have upgrade 2 of my Macbook air 11" models. Both have major slow functionality in allmost every programs. slow mail, safari, pages. Allmost nothing of the funksjonalitys can being uses in numbers. Slow functionality when jumping between programs. Allover i have BIG problems with mac for my first time. And why do not Apple send a fix for all fails there is after upgrading to Yosemite. When thousand of users have the same problem with major slow mac`s.
Here is a test for my mac.
EtreCheck version: 2.1 (101)
Report generated 4. desember 2014 kl. 22.48.33 CET
Hardware Information: ℹ️
MacBook Air (Verified)
MacBook Air - model: MacBookAir6,1
1 1.7 GHz Intel Core i7 CPU: 2-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel HD Graphics 5000 -
Color LCD 1366 x 768
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:12:8
Disk Information: ℹ️
APPLE SSD SM0512F disk0 : (500,28 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 496.30 GB (371.41 GB free)
Core Storage: disk0s2 499.42 GB Online
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store
Kernel Extensions: ℹ️
/Applications/Parallels Access.app
[not loaded] com.parallels.virtualsound (1.0 18 - SDK 10.6) [Support]
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hypervisor (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.netbridge (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.usbconnect (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.vnic (10.1.1 28614 - SDK 10.7) [Support]
/Library/Application Support/Kaspersky Lab/KAV/Bases
[not loaded] com.kaspersky.kext.kimul.38 (38) [Support]
/Library/Extensions
[loaded] com.silex.driver.sxuptp (1.10.9 - SDK 10.8) [Support]
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.2.61 - SDK 10.6) [Support]
[not loaded] com.freecom.driver.BoulderScsi (1.0.0d1) [Support]
[not loaded] com.kaspersky.kext.klif (2.2.1d19) [Support]
[not loaded] com.zg.driver.ZGUSBCDCACMData (1.5) [Support]
[not loaded] com.zg.driver.ZGUSBMassStorageFilter (1.5) [Support]
[not loaded] com.zg.driver.cdc_ecm_qmi (1.9) [Support]
[not loaded] com.zg.driver.cdc_usb_bus (1.9) [Support]
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.2.61 - SDK 10.6) [Support]
[not loaded] com.devguru.driver.SamsungACMData (1.2.61 - SDK 10.6) [Support]
[not loaded] com.devguru.driver.SamsungMTP (1.2.61 - SDK 10.5) [Support]
[not loaded] com.devguru.driver.SamsungSerial (1.2.61 - SDK 10.6) [Support]
Launch Agents: ℹ️
[running] com.brother.LOGINserver.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.parallels.mobile.prl_deskctl_agent.launchagent.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[failed] com.kaspersky.kav.plist [Support] [Details]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[running] com.parallels.mobile.dispatcher.launchdaemon.plist [Support]
[failed] com.parallels.mobile.kextloader.launchdaemon.plist [Support] [Details]
User Launch Agents: ℹ️
[running] ca.indev.MailTagsHelper.agent.plist [Support]
[loaded] com.facebook.videochat.[redacted].plist [Support]
[loaded] com.genieo.completer.download.plist Adware! [Remove]
[loaded] com.genieo.completer.ltvbit.plist [Support]
[running] com.genieo.completer.update.plist Adware! [Remove]
[not loaded] com.macpaw.CleanMyMac.helperTool.plist [Support]
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist [Support]
[not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
[loaded] com.parallels.mobile.startgui.launchagent.plist [Support]
User Login Items: ℹ️
iTunesHelper ProgramHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
fuspredownloader ProgramHidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 71 Check version
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
NP_2020Player_IKEA: Version: 5.0.94.1 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
nplastpass: Version: 3.1.61 [Support]
JavaPlugin2_NPAPI: Version: Unknown
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
userinternetplugins ℹ️
Google Earth Web Plug-in: Version: 7.1 [Support]
Safari Extensions: ℹ️
Facebook Cleaner
Pin It Button
LastPass
ResizeMe
OpenIE
3rd Party Preference Panes: ℹ️
Cineform [Support]
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 496.30 GB Disk used: 124.90 GB
Destinations:
Data [Network]
Total size: 3.00 TB
Total number of backups: 65
Oldest backup: 2013-08-15 20:20:51 +0000
Last backup: 2014-12-04 17:20:31 +0000
Size of backup disk: Excellent
Backup size 3.00 TB > (Disk size 496.30 GB X 3)
Top Processes by CPU: ℹ️
4% WindowServer
1% fontd
1% cloudd
0% Safari
0% launchd
Top Processes by Memory: ℹ️
369 MB com.apple.WebKit.WebContent
155 MB Safari
103 MB Feedback Assistant
86 MB Finder
69 MB mds_stores
Virtual Memory Information: ℹ️
4.52 GB Free RAM
2.60 GB Active RAM
652 MB Inactive RAM
820 MB Wired RAM
1.04 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 4, 2014, 10:37:00 PM Self test - passed[loaded] com.genieo.completer.download.plist Adware! [Remove]
[loaded] com.genieo.completer.ltvbit.plist [Support]
[running] com.genieo.completer.update.plist Adware! [Remove]
[not loaded] com.macpaw.CleanMyMac.helperTool.plist [Support]
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist [Support]
[not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
Your machine is slow because you loaded a bunch of third party junk on it. -
After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.
We've had several instances where we have had to run chkdsk on arrays with over 1m files. Average completion time is approximately 72 hours. The maximum downtime window they have available is the 64 hour weekend window. File sizes and number of files were
much smaller then than they are now.
The idea, in theory, was to use VHDs to compartmentalize the data into smaller volumes which could be more easily managed. It would also improve performance when transferring these compartments of data as they would use sequential read/write rather than
fragmented/random. This idea was never fleshed out in entirety, they don't split data up into little containers, but simply into big ones per project. Hence the 11m files in one container that I am currently trying to diagnose.
Some other important facts: The VHD in question is mounted in B:/project/ as this server also allows remote workers to log in, but they are restricted to see only data in E:. Disks A-D are hidden via group policy.
Update: icacls is failing on a large number of files within this dataset. I counted the path characters to ensure it wasn't the 255 character limit I was encountering and verified that the paths being blocked are only about 150 characters long. Once it finishes,
I'll have to try taking ownership and then re-running it. At this point I still have no idea how long to expect. I'm running out of time as the environment will be in use again at 9AM tomorrow morning. -
WS Receiver Adapter Error - Error in WSDL access for task ID
Hi Experts,
Need Help..I am working on (PI 7.1:HP-UX) IDoc to WS Adapter scenario. Message failed in SXMB_Moni...Pasting the Error log. Does this related to any Network Issues? Do I need to do anymore configurations in WS Received Adapter?
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">WS_ADAPTER_SYS_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>System error while calling Web service adapter: Error in WSDL access: 'Error in WSDL access for task ID "00000000000000000021"; read the long text'</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks,
Phani Akella.Hi,
Ports were opened in the firewall...Now struggling with a different error. Gone through SDN and found Note 1142454 - Error when initializing the SOAP application.
System error while calling Web service adapter: Error when initializing SOAP client application: 'error_text'
This did not help...Do we need to do any SOAMANAGER Configuration? Please suggest.
Thanks in Advance,
Phani Akella. -
Identify/expire Pages that have not been accessed for certain time
Hi,
I would like to create a publishing portal. Many users are able to create pages. I have the requirement that if a page does not get accessed for a certain time-period - it should be flagged for deletion and the creator should be notified by email.
Expiration policies depend on creation/modification date. Does this work for the last-accessed time (whereever I get this information from) aswell?
SvenUse below powershell
$outputPath = Read-Host “Outputpath (e.g. C:\output\UnusedSites.txt)”
$lastDate=Read-Host “Last Accessed Date (in format mm/dd/yyyy)”
$gc = Start-SPAssignment
$site=$gc | get-spsite -Identity https://sitecollectionUrl
foreach($web in $site.AllWebs)
if ($web.LastItemModifiedDate -lt $lastDate)
Write-Host -f Red “Site is old…” + $Web.Title
Add-Content -Path $outputPath -Value “$($web.Title),$($web.ServerRelativeUrl),
$($web.LastItemModifiedDate),$($web.Author)”
else
Write-Host -f Green “Site: [" + $web.Title + "] Last Modified Date: ” + $web.LastItemModifiedDate
Stop-SPAssignment $gc
Or
plan to use this tool
http://www.harepoint.com/Products/HarePointAnalyticsForSharepoint/FindOutdatedContentInSharePoint.aspx -
ISE: Database Purge for Tables failed
Hi,
I found out my ISE Admin/PSN node and iPEP node didn't showing any log.
And it show me some message of "Database Purge for Tables failed"
attache is the snapshot of it, anyone can comment?
million thanks
NoelHi Marcin,
Thanks for the reply. Sorry that's lack of info on the device.
The NAC3315 loaded with version 1.1.3.124, with patch 1 loaded.
I will give a try and see would it solve this issue or not.
By the way, my deployment is one Admin/PSN node, another unit is iPEP, both having the identical ISE version and patches.
My question:
should i patch both machine?
how do i patch iPEP unit ? in CLI mode? (there's no maintenance GUI accessibility to the iPEP)
Thanks
Noel -
No write access for iTunes media folder
Every time I try to download updates to iPod Touch applications or purchase music, I get the message "iTunes couldn't download your purchase. You don't have write access for your iTunes media folder or a folder within it." This was working prior to approximately December 20, 2010. I have searched for answers and every single thing I've tried has failed.
I have made sure that my user owns all the files in the iTunes media folder and has write permissions. In fact, I have ensured the user has write permissions for all directories both above and below this directory.
I have removed C:\ProgramData\Apple Computer\iTunes\SC Info as described in http://support.apple.com/kb/TS1277 .
I have moved my iTunes folder to a new one (off the root directory, e.g. C:\foo) as described in http://support.apple.com/kb/HT1364 .
I have even created a new user account, which also has the issue.
I am running iTunes 10.1.1 on Windows 7 on a 64-bit AMD Sempron laptop. I have made no significant software changes prior to this problem appearing, though regular Windows and iTunes updates are routinely applied. The device I'm attempting to use is a second generation iPod Touch, but that doesn't really matter - it doesn't need to be connected for the issue to occur.
I apologize for being quite the Windows luser. This is my partner's computer - I'm a Unix and Mac guy.
Thanks in advance!This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
Regards. -
Ora-20100 file o0056030.tmp creation for fnd_file failed
Hi all,
i have created a menu and save . when i checked on view-->request --Find
i got following error.
ora-20100 file o0056030.tmp creation for fnd_file failed
plz help
thanksSorry, did not know that you have no Metalink access.
Please verify the following:
1) Make sure that APPLPTMP is set to a valid directory as shown above (Verify from the OS by issuing "echo $APPLPTMP" as applmgr user)
2) Make sure that both the applmgr user and the database user "oracle" have read/write permissions on $APPLPTMP
3) Make sure that APPLPTMP is the first entry in utl_file_dir (utl_file_dir is set in the init<SID>.ora file). To verify to what "utl_file_dir" is set:
SQL> connect / as sysdba
SQL> show parameter UTL_FILE_DIR -
Hi everyone
I recently had a error screen on my ipod 5th generation and it asked me to restore to the factory settings which i did.
Since my library had been transfered back to my computer using Ipod Access for Windows program (i had to format my computer at one time) well now i am getting nothing but errors messages when i want to transfer back all my songs.
Here is the Error message: Attempting to copy to the disk "Jewels IPOD" failed. The disk could not be read from or written to.
Is there any way to by pass the songs that there is an error to them, so that i can stop crabbing about deleting them and restarting the process
thank you so much JEWELSSee if this troubleshooting article helps.
Disk cannot be read from or written to error syncing iPod in iTunes. -
SQLException: ORA-08177: can't serialize access for this transaction
Hiya, If anyone has any suggestions on the following, i would be grateful...
The exception is thrown by the flushing of the OutputStream in the following few lines:
java.io.OutputStream os = ((weblogic.jdbc20.common.OracleClob) myClob).getAsciiOutputStream(); os.flush();
The exception given is: java.io.IOException: Error while doing writeLobByteValue: java.sql.SQLException: ORA-08177: can't serialize access for this transaction at weblogic.db.oci.OciOutputStream.flush(OciOutputStream.java:152)
... plus a whole pile of internal stuff
This method is called from the ejbStore() method of an EJB, and it only fails the first time that ejbStore() is called, and then after that runs smoothly.
Any suggestions appreciated, Cheers, Karen.Thanks, took a look at that previously - still having the problem though temp solution seems to be to delete extra records from the table in question but this isn't the best solution by all means.
Thanks again -
Sometimes I have an error connecting SQL Azure. The error occurs in an asp.net application and in a windows service running on VM in Azure. Error details:
System.Data.Entity.Core.EntityException: The underlying provider failed on Open. ---> System.Transactions.TransactionManagerCommunicationException: Network access for Distributed Transaction Manager (MSDTC) has been disabled. Please enable DTC for network
access in the security configuration for MSDTC using the Component Services Administrative tool. ---> System.Runtime.InteropServices.COMException: The transaction manager has disabled its support for remote/network transactions. (Exception from HRESULT:
0x8004D024)
at System.Transactions.Oletx.IDtcProxyShimFactory.ReceiveTransaction(UInt32 propgationTokenSize, Byte[] propgationToken, IntPtr managedIdentifier, Guid& transactionIdentifier, OletxTransactionIsolationLevel& isolationLevel,
ITransactionShim& transactionShim)
at System.Transactions.TransactionInterop.GetOletxTransactionFromTransmitterPropigationToken(Byte[] propagationToken)
--- End of inner exception stack trace ---
at System.Transactions.Oletx.OletxTransactionManager.ProxyException(COMException comException)
at System.Transactions.TransactionInterop.GetOletxTransactionFromTransmitterPropigationToken(Byte[] propagationToken)
at System.Transactions.TransactionStatePSPEOperation.PSPEPromote(InternalTransaction tx)
at System.Transactions.TransactionStateDelegatedBase.EnterState(InternalTransaction tx)
at System.Transactions.EnlistableStates.Promote(InternalTransaction tx)
at System.Transactions.Transaction.Promote()
at System.Transactions.TransactionInterop.ConvertToOletxTransaction(Transaction transaction)
at System.Transactions.TransactionInterop.GetExportCookie(Transaction transaction, Byte[] whereabouts)
at System.Data.SqlClient.SqlInternalConnection.EnlistNonNull(Transaction tx)
at System.Data.ProviderBase.DbConnectionPool.PrepareConnection(DbConnection owningObject, DbConnectionInternal obj, Transaction transaction)
at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal&
connection)
at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.<>c__DisplayClass1.<Execute>b__0()
at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute[TResult](Func`1 operation)
at System.Data.Entity.Core.EntityClient.EntityConnection.Open()
--- End of inner exception stack trace ---
at System.Data.Entity.Core.EntityClient.EntityConnection.Open()
at System.Data.Entity.Core.Objects.ObjectContext.EnsureConnection()
at System.Data.Entity.Core.Objects.ObjectContext.ExecuteInTransaction[T](Func`1 func, IDbExecutionStrategy executionStrategy, Boolean startLocalTransaction, Boolean releaseConnectionOnSuccess)
at System.Data.Entity.Core.Objects.ObjectQuery`1.<>c__DisplayClassb.<GetResults>b__9()
at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute[TResult](Func`1 operation)
at System.Data.Entity.Core.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption)
at System.Data.Entity.Core.Objects.DataClasses.EntityReference`1.Load(MergeOption mergeOption)
at System.Data.Entity.Core.Objects.DataClasses.RelatedEnd.DeferredLoad()
at System.Data.Entity.Core.Objects.Internal.LazyLoadBehavior.LoadProperty[TItem](TItem propertyValue, String relationshipName, String targetRoleName, Boolean mustBeNull, Object wrapperObject)
at System.Data.Entity.Core.Objects.Internal.LazyLoadBehavior.<>c__DisplayClass7`2.<GetInterceptorDelegate>b__2(TProxy proxy, TItem item)Hello,
I am not an expert in MSDTC but as we know,SQL Azure Database does not support
distributed transactions. This means that SQL Azure doesn’t allow Microsoft Distributed Transaction Coordinator (MS DTC) to delegate distributed transaction handling.
One common cause of MSDTC getting involved in Entity Framework applications is the fact that we close and reopen the same connection as needed (i.e. for each query that is executed).To avoid the stack from opening and closing the connection multiple times,
you can simply open the connection explicitly and run the queries in the same connectio.
The following thread is about a similar issue, please refer to:
http://answers.flyppdevportal.com/categories/azure/sqlazure.aspx?ID=d705a8cf-cba4-494c-96f6-96a136bd29e3
What's more, you can also try the workaround that involves setting the Enlist option of the SQL Azure connection to false. For the detail explanation, please refer to:Entity
FrameWork and SQL Azure
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Adobe Creative Cloud Packager for macintosh fails
Adobe Creative Cloud Packager for macintosh fails.
The error log says "[ERROR] AdobePackageBuilder - AdobePackageBuilder : SendPacket returned error : -1".
I tried 4-5 times.
Everything is downloaded (took about 14 Gb).
I now have only 12Gb free space on my disk. Can that be the reason (will the packager need to make a copy of the downloaded stuff?).
When I am done, how do I reclaim the space eaten by the packager?
Seems like it is caching it at ~/Library/Application Support/Adobe/CCP, but will I manually have to delete that cache?
I cannot find a menu entrance for doing so.
Would be nice if the packager could use a mounted network disk as destination, but it seems not to discover these.
/Peter AndersenWanted to join in and say this has been happening to me too. I wiped every adobe file I could find, and used the cleaner too. Started over from scratch in a brand new user account.
It's been about 7 days and I cannot get CCP to actually build a package. I've gotten a variety of messages but everything single time something fails. The new thing is that it says it fails on individual applications. So I disable them, and the error jumps to a new app. I can see that the .dmg's are fine and intact in ~/Library/Application Support/Adobe/CCP/
Given the amount of time this has cost me I really wish I had purchased CS6 Master Collection for every workstation. From my perspective, Creative Cloud has been nothing more then a giant waste of time and effort. It's genuinely bad product from an IT management perspective. Why push off the job of building and installer onto the customer? I should just be able to download the full Master Collection dmg, and then turn on and off the apps I want. Instead I am stuck with a workstation down, and everyone using CC trials to work. -
Sharepoint 2010 permission The following factors also affect the level of access for
hello,
In my development server ,suddently from no where all users ,even full control group users
cannot able to add or edit any list or any content.
The following factors also affect the level of access for user1(domain\user1)
Deny
Manage Permissions
Create and change permission levels on the Web site and assign permissions to users and groups.
Deny
Create Subsites
Create subsites such as team sites, Meeting Workspace sites, and Document Workspace sites.
Deny
Manage Web Site
Grants the ability to perform all administration tasks for the Web site as well as manage content.
Deny
Add and Customize Pages
Add, change, or delete HTML pages or Web Part Pages, and edit the Web site using a Microsoft SharePoint Foundation-compatible editor.
Deny
Manage Lists
Create and delete lists, add or remove columns in a list, and add or remove public views of a list.
Deny
Apply Themes and Borders
Apply a theme or borders to the entire Web site.
Deny
Apply Style Sheets
Apply a style sheet (.CSS file) to the Web site.
Deny
Override Check Out
Discard or check in a document which is checked out to another user.
Deny
Manage Personal Views
Create, change, and delete personal views of lists.
Deny
Add/Remove Personal Web Parts
Add or remove personal Web Parts on a Web Part Page.
Deny
Update Personal Web Parts
Update Web Parts to display personalized information.
Deny
Add Items
Add items to lists and add documents to document libraries.
Deny
Edit Items
Edit items in lists, edit documents in document libraries, and customize Web Part Pages in document libraries.
Deny
Delete Items
Delete items from a list and documents from a document library.
Deny
Create Groups
Create a group of users that can be used anywhere within the site collection.
Deny
Use Self-Service Site Creation
Create a Web site using Self-Service Site Creation.
Deny
Approve Items
Approve a minor version of a list item or document.
Deny
Delete Versions
Delete past versions of a list item or document.
Deny
Create Alerts
Create alerts.
Deny
Manage Alerts
Manage alerts for all users of the Web site.
Deny
Edit Personal User Information
Allows a user to change his or her own user information, such as adding a picture.
For all the users this happened ,How i need to fix this issue
please help.
thanksTake a look at the user policy settings for the web application. I suspect someone has added a User Policy that covers the user which denies all these permissions. The User Policy at the web app level is the only place where you can deny permissions.
But that setting applies to every site collection in the web application and takes precedence over every other setting.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
I get this following message when installing the latest itunes on mozilla or IE10 was working on this machine before crash and reinstalled for HP disc I tried at leat 15 times firewall off /on microsoft essentials on/off on windows 7 64 bit see message
This installation package could net be opened verify thatthe package exist and that you can access for contact the application vendor to verify this is a valid windows installer packageIf you are not already doing so, install from an Administrator account.
If you haven't already done so, download the iTunes Installer from:
http://www.apple.com/itunes/download/
Then right click on the installer and select "Run as Administrator." (Even though you are using an admin account).
If that doesn't work, try creating a new administrator account and installing from there. -
Hi,
Any help on this?
Thanks
srabonHi srabon,
For giving unique access for a specific file in a library, you can go to the library, and select the file , and click FILES->Shared With->ADVANCED, under PERMISSION ribbon, click ‘Stop Inheriting Permissions’, then the file will have unique permissions.
For removing the shared users for a file, firstly, like the above steps, select the file , and click FILES->Shared With->ADVANCED , make sure the file has unique access, then select the users that you want to remove, and click Remove User Persmissions
under PERMISSIONS ribbon.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
Access for update only one column in table?
Hi all,
My need is to grant access for update only one column c1 in table t1.
I guess I should use view, could you please give me some example? Maybe other ideas?Hi,
You can grant privileges on individual columns.
GRANT UPDATE (c1)
ON t1
TO grantee_name;Look up GRANT in the SQL language manual. Annoyingly, in recent editions of the manual, GRANT is not indexed, but it's in alphabetic order with all the other statements:
http://docs.oracle.com/cd/E11882_01/server.112/e26088/statements_9013.htm#i2155015
Maybe you are looking for
-
Using the iPod Function of iPhone 3G while docked in the Universal Dock
I am trying to use the iPhone to play my music while docked in my universal dock with the correct snappins that I just received. I here absolutely no music from the speaker while docked. I have tested it while using the alarm and receiving a call fro
-
REF cursor with special characters
Hi all, I want to display the record set using ref cursor. I am passing varchar field as parameter. How to give this in where cluase of select statement. i want to use like %parameter_name% in where condition. How to use it in ref cursor. Thanks in a
-
When setting up for PRINT I select from the setup menu my printer and click PRINT. However the program defaults to the printers fax mode. This occurs also after reinstalling the program. Printing from all other programs are OK. Any suggestions why t
-
Problem In Portal Installation NW2004S SR 1
Hi , Am trying to install NW2004s on my localsystem but am hung with the following errors ... Please tell me what should be done to bridge this error. The useful answers will be treated aka SDN way <b>The ErrorLog is :</b> INFO 2007-02-07 17:21:29 C
-
Hi All, 1. If I give Sold-to,should return Payer, Bill-to and Ship-to Party...Can anyone please let me know is there any standard BAPI ? 2.If I give Sold-to, Should return the Shipping Instruction text and so-on (Go to Sales Area data tab for a custo