Access Hdd/printer via Airport extreme via connecting thru existing network....help plz

hi...!!!!
i have got a belkin wifi router and i have been using this for ever but now since i have the Airport extreme i wanted it to connect it to my existing network and access my seagate HDD wirelessly and obviously printing as well without hooking up any ethernet or any kind of cable to my Airport extreme router....
is there any possible chance for this????????
help plzzz
the reason i cant use cables is beacuse all my printer, hdd and airport extreme, n airport express is in one separate room and the internet modem and the router is in different location.....
My Airport Express worked perfectly fine printing wirelessly and using air tunes wirelessly through connecting it to my existing Belkin wifi.....but somehow my Airport extreme doesnt seem to be happy with me doing the same process....
i would appreciate any kind of help i may get.....
here are some of my screen shots for AIR PORT EXPRESS and AIRPORT EXTREME
that last bottom pic is that on airport extreme disk tab i can see my seagate HDD but on a finder i dont see anything..
help plzz...!!!!!!!!

sachraj wrote:
i will try it definitely..but is it even possible to access ma hdd an print wirelessly thru AE without hooking up into any sort of cables???
I gather you mean hooking up cables to your computer? If so the answer is yes. My printer is hooked up to my Airport Extreme through its usb port. I can print wireless flawlessly.

Similar Messages

Access Hdd via Airport extreme via connecting thru existing network....help plz

hi...!!!!
i have got a belkin wifi router and i have been using this for ever but now since i have the Airport extreme i wanted it to connect it to my existing network and access my seagate HDD wirelessly and l without plugging in any ethernet or any kind of cable to my Airport extreme router....
is there any possible chance for this????????
help plzzz
the reason i cant use cables is beacuse all my printer, hdd and airport extreme, n airport express is in one separate room and the internet modem and the router is in different location.....
My Airport Express worked perfectly fine printing wirelessly and using air tunes wirelessly through connecting it to my existing Belkin wifi.....but somehow my Airport extreme doesnt seem to be happy with me doing the same process....
i would appreciate any kind of help i may get.....

sachraj wrote:
hi...!!!!
i have got a belkin wifi router and i have been using this for ever but now since i have the Airport extreme i wanted it to connect it to my existing network and access my seagate HDD wirelessly and l without plugging in any ethernet or any kind of cable to my Airport extreme router....
is there any possible chance for this????????
help plzzz
It is not possible.

HP Deskjet 3550 cannot print using Airport Extreme via USB connection on Windows 7 64 bits

Product Name and Number: HP Deskjet 3550 Inkjet Printer
Operating System installed: Windows 7 Home Premium 64 bits
Error message: None
Any changes made to your system before the issue occurred: Setting up HP printer using Airport Utility to add a new printer and installed Bonjour Print Wizard.
Problem: My printer is already set up using Airport Utility. When I print something, the printer doesn't do anything. Is there something I haven't done lately in order to get this printer working using my wifi router?
Suggestion #1: Are the print jobs getting stuck in the print queue? You can check this by clicking on the printer icon in your task tray by the clock.
Error Message #1: Yes, the print job got stuck in the print queue, but the moment, it disappeared from the print queue and the printer doesn't print at all. This is frustrating.
Suggestion #2: Does the printer work as expected if you connect it directly to the PC via USB?
Error Message #2: Yes, the printer works if I connect it directly to my PC via USB, but I don't understand why it wouldn't work with the wifi router, though.
Suggestion #3: This has to do with the way the router handles the connection to the printer. I found another thread, regarding this issue, and it has some information that may help resolve it.
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Print-Problem-Using -USB-Printer-on-Airp...
If that does not help, I would recommend posting on the Apple forums, as they may have more expertise with the router's abilities:
https://discussions.apple.com/community/wireless/airport
Error Message #3: After clicking on the first link that you posted, it was very helpful, but the printer couldn't print completely and somehow it would stop at the quarter of a paper. It looks incomplete when I took it out from my printer. It does that every time.

UPDATE!
Problem solved! So this is just a followup in case someone else ever stumbles into these boards with the same or similar problems as mine, that is, trying to run an HP Deskjet D1500 series printer [mine's a D1520] on an Airport Extreme wifi router's USB port as a network printer [with the Airport Extreme controlled by an ancient G4 PowerMac Quicksilver currently running OS X 10.4.11).
Although it probably SHOULDN'T matter, since this type of printer works fine with just the Tricolor cartridge as shipped when hooked up directly to a computer's USB port, on a hunch I got a black HP cartridge (that's a type 21, not type 22 as I had earlier said), slapped it in, tried a test page, and all's well. So, we can call off the technoid hounds. Everything running perfectly.
I hope this message in a bottle may help someone else out there some day soon who may be scratching his or her head with a similar stumper. And just to recap those important Windows printer settings, they are:
* [Printer Properties--> Ports--> Add New Port...] "Standard TCP/IP Port"
* [Configure Port] IP Address "10.0.1.1" and Port "9100"
Best of luck!
Bilgey

Connecting printer to Airport extreme via Ethernet

I have just setup a wireless home network using Airport extreme. My desktop windows xp pc does not have a wireless connection and is connected to the internet by ethernet directly pluged in to the DSL modem.
My Canon printer is connected to the Airport's USB port.
Is there a way I can connect the desktop pc to the printer via the Airport's Ethernet connection?
I appreciate any help, herb

Welcome to the discussions forum Herb.
I have just setup a wireless home network using Airport extreme.
From what you described, you're not done yet.
As I understand it, you're using your MacBook Pro to print to the Canon wirelessly through the Airport Extreme, but your Windows computer can't do that since it has no wireless card. Furthermore, you can't use your MacBook Pro to get on the internet when your DSL modem is connected directly to your PC. Is that right?
The right way to do things is to connect the DSL modem to the *Airport Extreme*, not a computer. Since your PC isn't wireless, its Ethernet port ought to be connected to the Airport's LAN port, and not directly to the DSL modem.
To reconfigure your equipment the right way, do the following:
1. Power down your Windows computer.
2. Unplug the DSL modem.
3. Unplug the Airport Extreme.
4. Power down all your other equipment too, for good measure.
5. Unplug the Windows computer from the DSL modem, and connect it to a LAN port on the Airport Extreme.
6. Using another Ethernet cable, connect the Airport Extreme's WAN port to the DSL modem.
7. Plug in the DSL modem. Wait a few moments for it to complete its power up sequence. Some take longer than others.
8. Plug in the Airport Extreme. After a few moments, its LED should glow steady green, meaning it's communicating with the DSL modem.
If the light blinks amber and never turns green, that means you'll have to reconfigure the Airport using Airport Utility. Not a problem, but if that happens you ought to write back for more help.
9. Boot your computers and the printer. The order isn't important.
Now, check to make sure you can communicate with everything the way you have been used to doing:
1. Log in to your Windows computer and make sure you can load a web page.
2. Log in to your MacBook and make sure you can still print to the Canon.
3. Make sure you can load a web page with your MacBook Pro.
4. Finally, you ought to be able to print with your PC as you're accustomed to. If you can't, you will need to "add a printer" in Windows so it can find the Canon again.
Good luck.

Connect to internet via airport extreme via ethernet cable and no airport c

I just bought a MacBook with Airport Extreme, got it set up today and it works great, got online, etc. However, I have an iMac with no airport card. I can't figure out how to get both computers hooked up on the internet at the same time. The MacBook works only when the ethernet cable in in the LAN slot on the Extreme but won't work through the WAN slot. I have tried hooking up both ethernet cables into the Extreme, just the iMac, and nothing works. I don't need to connect wirelessly through the iMac so I don't want to buy an Airport card if I don't need one. I just don't want to plug and unplug the ethernet cable everytime I want to use the MacBook or the iMac. My modem from Verizon only has one ethernet slot. Any ideas?

I just bought a MacBook with Airport Extreme, got it
set up today and it works great, got online, etc.
However, I have an iMac with no airport card. I
can't figure out how to get both computers hooked up
on the internet at the same time. The MacBook works
only when the ethernet cable in in the LAN slot on
the Extreme but won't work through the WAN slot. I
have tried hooking up both ethernet cables into the
Extreme, just the iMac, and nothing works. I don't
need to connect wirelessly through the iMac so I
don't want to buy an Airport card if I don't need
one. I just don't want to plug and unplug the
ethernet cable everytime I want to use the MacBook
or the iMac. My modem from Verizon only has one
ethernet slot. Any ideas?
You mean Airport Extreme Base station?
Here's what you need to do:
1. Disconnect your Verizon Modem & Airport Extreme
2. Connect the ethernet cable from the Verizon modem to the WAN of the AE
3. Connect another ethernet cable from the LAN port of the AE to your iMac
4. Turn on Verizon Modem
5. Once all lights on the modem have turned on, turn on the Airport Extreme
6. On your iMac click on Applications --> Utilities --> Airport Admin Utility
7. Setup a Wireless network using this or the Airport Setup Assistant, located in the same Utility folder.
8. After you have created the wireless network, connect to it on your macbook
If for some strange reason you still can't figure it out, refer to the product manual or check:
http://docs.info.apple.com/article.html?artnum=106858

Airport Card not connecting to existing network

New to wireless and to these forums, although i have found them useful in the past this is my first posting.
I have just installed a new airport extreme card into my imac, prior to this i installed the software.
the airport card seems fine, the mac recognises it, it does not however see the wireless router. (netgear dg834pn). The router is configured ok as my laptop (Macbook Pro) and my wifes laptop (dell pc) work fine with it.
how do i make the imac see the network?
any help would be appreciated.

ukdave, Welcome to the discussion area!
Verify that the antenna wire is properly connected to the AirPort Extreme card. Compare you installation to the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card.
Also... is there any chance that you have installed an AirPort Extreme card from the US? The US cards only recognize channels 1-11. If your Netgear is using channels 12 or 13 try changing it to a channel between 1 and 11.

Configuring Mac Mini Server via Airport Extreme via Netopia Modem

Can any anyone help me with the settings to allow internet access to my Mac Mini Server by a Web browser. What way to you configure the modem and extreme. The modem seems to want to duplicate a lot of the features of the extreme in it a has its own port forwarding etc. I have manually set all devices with fixed ip addressas it shares the net work with a Windows SBS. I have a static IP Address and Domain name registered and hosted dns has the domain tranfered. Nat is enabled and ftp, itunes ports open.
Internet is working on the local network which has a 3 Capsules, IMac, and 2 apple TV's all working and streaming from the server. Running Lion from last week.
Would appreciate any help as this is is my first time to use the forum.
Thanks again.

First welcome to the discussions.
To set up the client you'll first have to ask the Network Administrator for the name of the VPN server. The username and other details you will need to log on.
You will also need to find out if the VPN uses PPTP or L2TP over IP Sec. with that information in hand open Internet connect in the Applications folder choose NEW VPN Connection then you click on either PPTP or L2TP whichever the network uses, then click continue in the confiquration pop up menu, Choose Edit confiqurations Then enter the information the Network administrator gave you.
Bear in mind that the OSX client does not work with all VPN's.
You may have to purchase a universal VPN client such as VPN Tracker from Equinux ($90.00).
http://www.equinux.com
Good Luck Don

Time capsule connect to existing network cannot connect MBP via ethernet

I have set up my time capsule via Airport utility to "connect to existing network", which is my Netcomm wireless router (which is my DHCP server). MBP connects perfectly to time capsule if wireless is on, presumably via the Netcomm. But if I plug the MBP into an ethernet port on the time capsule it is not recognized and it gets a self assigned ip 169.254.x.y.
Airport utility is very restrictive in the options and is basically useless in resolving the obvious ip conflict. Is there any trick to getting both the wireless and ethernet to work ? It should not be this difficult....
The time capsule 2T disk is useless as a backup device over wireless.

[email protected] wrote:
I have set up my time capsule via Airport utility to "connect to existing network"
Is that the exact wording of the option you chose? In AirPort Utility I see options of "Create a wireless network", "Join a wireless network", and "Extend a wireless network". (Perhaps the difference is due to language usage.) The option to "Join a Wireless Network" is only useful for sharing disks and printers. It doesn't support Ethernet ports.
if I plug the MBP into an ethernet port on the time capsule it is not recognized
With some options there's a checkbox to "Allow Ethernet Clients". If you see that, try it.

How do i use the airport extreme to extend my wireless network

How do i connected my airport extreme up to my existing network so that it can extend my wireless through out the house ??
Can it be done wirelessly or do i need an ethernet cable thats about 10m ?
Keith

The AirPort Exteme can "extend" your existing wireless network (using wireless only) if it is being provided by another Apple router.
If your current main router is not an Apple product, then you will need to plan to connect the AirPort Extreme to your router using an Ethernet cable.
Post back for more information if needed.

Printing problems with HP 1012 connected via Airport Extreme - resolved?

I originally posted on this issue in a long-running discussion on HP printer issues.
http://discussions.apple.com/message.jspa?messageID=10109788#10109788
Problem: Upgraded iMac 10.4.11 to 10.6 Following upgrade everything seemed fine except that the HP 1012 connected via Airport Extreme was not responsive. The system knew the printer was there, had installed the proper driver for it.
Intermediate troubleshooting: I tried to use Airport Utility to check the AE. It timed-out when trying to retrieve the AE setup specifications. I tried to update the firmware (7.4.1 to 7.4.2); system timed-out after a very long several minute "search for new version of the firmware."
Apparent solution: (any of the following may have made the difference - sorry not to have been more systematic)
a. I turned off AP on the iMac.
b. I unplugged the AE base station for one minute+, then re-powered it.
c. I opened my MBP with 10.5.7. Started up Airport Utility.
d. I renamed the base station. Left all other settings alone.
e. I installed the 7.4.2 firmware upgrade.
f. I ran Preference Repairs on the iMac (though I had done this right after installation of 10.6)
g. I turned on AP on the iMac.
Result: Almost immediate connection to AP, printer quickly began printing several of the test documents that must have been waiting in queue.
Too early to tell if I will have any further problems if if it permanently fixed.
Thanks to the several messages in both Printer and Network categories that suggested one or more of the above steps.
Stan

I hooked up my wife's Deskjet 5150 to my mac via USB. Since the 5150 does not have a driver from HP to work in SL. I decided to us the generic Gutenprint v5.2.3. For the heck-of-it, I picked, HP Deskjet 5550-Gutenprint v5.2.3. It prints. and the utility works, BTW, I am low on black ink.
I also tried the other printer drivers labeled "any printer name"-Gutenprint v5.2.3. and they all worked with the 5150.
So now that I know that the 5150's will work via USB with SL, I will now upgrade the other two laptops in my house to SL.
How to:
Turn printer on.
open System pref/ printer-fax/ add printer
Select hp desktop 5100
(name: -- Change name if you want - I kept " hp deskjet 5100"
Location: Your computer
Print Using: open dropdown box, select printer software. Type in: " Gutenprint" or "deskjet". I picked the HP Deskjet 5550-gutenprint v5.2.3. but I do not think it matters as long as it is a -gutenprint v5.2.3 driver.
Select OK

How do I access external hard drive connected to AirPort Extreme via iPad

Hello,
How do I access external hard drive connected to AirPort Extreme via iPad / windows laptop.
I donot have a Mac and I use windows laptop.

For your iPad, you will need an app, like FileBrowser, to access the external drive.
For your Windows laptop, you would access the drive like any other network share. The basic format is: \\<servername>\<sharename>, where, in this case, the servername is the base station name and the sharename is the name of the external drive.

My iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, although it will print if connected via USB. Meanwhile, my MacBook (OS 10.5.8) prints still prints wirelessly. Please help.

May iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, though my MacBook (OS 10.5.8) continues to function just fine). The iMac will print if it is connected to the printer directly via USB. The iMac continues to connect to the Internet wirelessly. I've tried resetting the printer and ensuring the driver is up to date, but no joy.
Any suggestions?

EPSON Stylus CX4800 All-in-One Printer
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=58606&prodoid=56291 067&infoType=Downloads&platform=Macintosh

Epson Stylus r360 issues printing in Leopard via Airport Extreme & Bonjour

I hope I am not duplicating any posts, have searched but have not found a similar problem.
I have an Epson Stylus Photo R360 printer connected to my Airport extreme via USB sharing the resource around the house via Bonjour to all my Mac's.
Problem is it works fine under Tiger but the 2 Mac's that have been upgraded to Leopard 10.5 no longer print. It discovers the printer and loads in the printer configuration window ok, drivers are found and the printer looks good to go.
However, when you try and print, after about a minute an error appears on the printer in Leopard with an exclamation mark and is unable to continue.
If you hook up the printer directly to any Mac running leopard, it works fine!
Anyone else having this problem? Is this something Apple has changed in Bonjour or maybe printer drivers problem via Bonjour?
Any help or advice would be greatly appreciated.
Thanks
G

I found a fix for the problem of not being able to print from a printer connected to an Airport Extreme.
I had similar issues with my Canon iP4200, which was connected to an Airport Extreme. Printing worked fine with Tiger, but Leopard has somehow corrupted the feature. Printing is now very sporadic, at best - and will stop a few seconds into the printing and hang. My solution was to hook the printer directly up to the main (host computer). Go into System Preferences > Sharing, and make sure you've selected 'printer sharing'. Then go into the Sys Pref for "Printing/Fax", and remove your current printer (which was accessed via Bonjour on your Extreme) - you can leave it if you like, just make sure that when you add the new one, that you make it the default. Once set, make sure that you check the box labeled 'Share this Printer'. You will also now notice that the printer's location has changed to your host computer's name. You will now be able to print from your main computer without a hitch. Now access the System Pref>Printer/Fax from any other wired or wireless computer on your network. Add a new printer, a new choice will appear on your list, which will list the printer name with the "@" symbol, followed by your host computer's name. Select that, and let it do it's auto driver check, then click 'add'.
You will now be able to print from any of your computer's on the network. Best of luck.

Annoying!: Sharing an external HDD to a Mac and PC via Airport Extreme

I use an Airport Extreme to connect wirelessly to the Internet. I have no problem accessing the Internet with either the house's Mac or PC.
I have an external HDD connected to the AE via USB and can access that via the Mac only.
I wish to be able to access the external HDD wirelessly via the PC. The external HDD has 2 partitions, FAT32 and NTFS.
Via Airport Utility I have found my way to File Sharing under the menu, Disks. I have just selected "Share disks over WAN".
Do I need to configure the Windows File Sharing also?
This problem has bothered for me some time and I have been unable to find anything on the Internet.

I wish to be able to access the external HDD wirelessly via the PC.
Please review the following Apple Support article: AirPort: How to mount an AirPort Extreme USB hard disk volume in Mac OS X and Windows
The external HDD has 2 partitions, FAT32 and NTFS.
The AirPort Extreme Base Station (AEBSn) will only "see" the FAT32 partition as it will not recognize partitions formatted for NTFS.

Internet connection via Airport Extreme/router thats not working, why?

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

Access Hdd/printer via Airport extreme via connecting thru existing network....help plz

Similar Messages

Maybe you are looking for