Access internet through abap

how can we use abap to access internet? Is it a possibility?

Hi,
Yes, You can use the function module call_browser to access a site..
i hope it answers the question else can you be more clear
Thanks&Regards
Sarves

Similar Messages

Problems with accessing Internet through router (permanent IP)

Hi.
I changed hostname with sys-unconfig. Now computer has permanent IP address (non DHCP) and right hostname.
Before this change I had access to Internet (hostname: "unknown" and DHCP).
My computers access Internet through router.
There is ping from my computer to router and another computer. Also other computer pings my computer.
In DHCP tables my computer does not exist.
I created file /etc/defaultrouter with IP of my router.
Trying to access Internet, web browser (Mozilla) writes: "<site.com> could not be found. Please check name and try afain."
I think there is a problem with DNS.
How to configure my computer on Solaris 10 to access the Internet with current configuration?
Thank you.

To test DNS services without a browser (ie, to see if the
system can be a DNS client), first use the command
'nslookup'
# /usr/sbin/nslookup sun.com
Server: miki-class-gla.eclecticgroup.co.uk
Address: 10.23.0.1
Non-authoritative answer:
Name: sun.com
Address: 72.5.124.61
# /usr/sbin/nslookup google.com
Server: miki-class-gla.eclecticgroup.co.uk
Address: 10.23.0.1
Non-authoritative answer:
Name: google.com
Addresses: 64.233.167.99, 64.233.187.99, 72.14.207.99
If this doesn't work, then your system isn't talking to a
DNS server at all at all, so you need to check the contents
of /etc/resolv.conf.
If it does work, use the command 'getent' to check that your
system as a whole is querying DNS for name-IP resolution.
EG.
# getent hosts sun.com
72.5.124.61 sun.com
# getent hosts google.com
64.233.187.99 google.com
72.14.207.99 google.com
64.233.167.99 google.com
If you don't get back IP addresses, your system isn't
correctly configured as a DNS client.
Look at /etc/nsswitch.conf, and find the line
that starts 'hosts'.
If it says
hosts files
then the system is not a DNS client.
To correct this, edit that line to add the word dns on the end:
hosts files dns
That's it. No need to reboot.

I have connected an AirPlay enabled device to iphone4s. I started palying songs. I was able to access internet through 3G from iphone.After few seconds 3G symbol disappears and WiFi symbol appears. After that I'm not able to access internet. Why is it so?

I have connected an AirPlay enabled device to iphone4s. I started palying songs. I was able to access internet through 3G from iphone.After few seconds 3G symbol disappears and WiFi symbol appears. After that I'm not able to access internet. Why is it so?

SMS. Deggie, had them check that. After a lengthy discussion with Senior Tech advisor, it appears it is iMessage/Face Time server (they are the same) issue, which will strong arm those into purchasing Data if they use iMessage over multiple devices, as the server registers the phone number associated with apple ID. Not impressed. I put what I've learned here in a simliar thread
https://discussions.apple.com/message/17416082#17416082
and this is what I've put in apple.com/feedback
"iMessage requires internet. SMS does not. iMessage/FaceTime auto logs phone numbers to the iMessage/Facetime server (it's the same server as I've come to learn), this means that when iMessage/Face Time is turned on anyone sending a message through the server to me will only be sent as an iMessage- not when I'm not connected to internet, meaning I will not receive the message as an SMS by default, when I have another device using iMessage (such as MacBook) logged in.
This feature is a problem for me, bottom line, in that iMessage strong arms the consumer (me) into having to buy a data plan that they either do not want, or do not need."

How can we allow internal users to access internet through ASA firewall?

Hello,
I am new to security track, i have been asked to setup lab and allow users from inside firewall to access internet. here is my lab setup
PC -> switch 1 (layer2) -> (inside) ASA (outside) -> switch 2 (Layer2) -> Router
does switch 2 port needs internet access through router?
what configuration required on ASA to allow users behind the firewall to access internet?
any help on this would be much appreciated.
thanks,

Hi,
Okay , can you clarify on this for me. Are you able to ping the internet from the ASA outside interface ?
Just try something like this:-
ping 4.2.2.2 .. Does this work ?
If this does not work , then i think the ASA even is not able to get to the internet and that would be a problem on the router.
Also , internet from Switch 2 is not a requirement as that is only a Layer 2 device.
You can assign the ISP allocated address on the PC , connect it to the Switch 2 port and then try to ping something on the internet or surf internet and i think that should work.
Thanks and Regards,
Vibhor Amrodia

Routing and Remote access - internal network not accessing internet through public network!

Hello,
Good Evening to all.
I got an issue in routing and remote access on windows 2003 server. This server is already configured as File server, domain server and Application server. Also configured as router (through routing & remote access) for connecting three different
network to each other. So This server has three NIC card installed and each NIC card represent separate network.
three different network are - 192.42.160.0/24 , 192.42.161.0/24, 192.42.162.0/24
Three NIC card installed on server as with following IP address -
NIC -1 = 192.42.160.220 , Sub- 255.255.255.0 , Gateway - NO
NIC -2 = 192.42.161.220 , Sub- 255.255.255.0 , Gateway - 192.161.220.112 (This ip for internet access so 4g router IP)
NIC -3 = 192.42.162.220, , Sub- 255.255.255.0 , Gateway - NO
Now the issue is I can reach to internet & (also pinging to router ip 192.42.161.112) from only one network that is - 192.42.161.0/24 , BUT when I trying to access internet from another two network (192.42.160.0/24 & 192.42.162.0/24) I cant access
it and moreover can't ping to internet router ip - 192.42.161.112...
So how I can access to internet from other two network also?
I was already configured static routing for all three network but still I was not success. really I don't know what exactly static routing it should be done in routing & remote access so that all three network can reach to internet?
Sorry if I am not able to explain properly. Please let me know if you need more explain on this...
Thanks to all.

Dear Milos,
I am happy to hear from you....
1.- Actually the setup was done long before by another guy and right now I don't want to change it.
Nice to hear from you! Thank you so much. Actually this is first time I am using technet forum upon the suggestion from one of the my friend. So any your help from you will help me a great in this issue...
I ran the route print command and given follow are the results.
I have only added the default route as per the below routes. Please guide me know how to add other static routes for three network.
D:\Documents and Settings\Administrator>route print
IPv4 Route Table
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...00 30 05 ad 8f 5c ...... Broadcom NetXtreme Gigabit Ethernet - Teefer2 Mi
niport
0x3 ...00 0e 0c a7 c4 f8 ...... Intel(R) PRO/1000 GT Desktop Adapter - Teefer2 M
iniport
0x4 ...00 0e 0c a7 c5 85 ...... Intel(R) PRO/1000 GT Desktop Adapter #2 - Teefer
2 Miniport
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.42.161.112 192.42.161.220 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.42.160.0 255.255.255.0 192.42.160.220 192.42.160.220 20
192.42.160.220 255.255.255.255 127.0.0.1 127.0.0.1 20
192.42.160.255 255.255.255.255 192.42.160.220 192.42.160.220 20
192.42.161.0 255.255.255.0 192.42.161.220 192.42.161.220 20
192.42.161.220 255.255.255.255 127.0.0.1 127.0.0.1 20
192.42.161.255 255.255.255.255 192.42.161.220 192.42.161.220 20
192.42.162.0 255.255.255.0 192.42.162.220 192.42.162.220 20
192.42.162.220 255.255.255.255 127.0.0.1 127.0.0.1 20
192.42.162.255 255.255.255.255 192.42.162.220 192.42.162.220 20
224.0.0.0 240.0.0.0 192.42.160.220 192.42.160.220 20
224.0.0.0 240.0.0.0 192.42.161.220 192.42.161.220 20
224.0.0.0 240.0.0.0 192.42.162.220 192.42.162.220 20
255.255.255.255 255.255.255.255 192.42.160.220 192.42.160.220 1
255.255.255.255 255.255.255.255 192.42.161.220 192.42.161.220 1
255.255.255.255 255.255.255.255 192.42.162.220 192.42.162.220 1
Default Gateway: 192.42.161.112
===========================================================================
Persistent Routes:
None
Regards & Thanks
Mahesh

Cannot access internet through itunes after last itunes update. Cannot get to itunes store or itunes help. Everything else works fine.

After last itunes update I cannot get to the internet through itunes. Cannot get to itunes store, itunes help, etc. Also, now when I sync everything syncs properly but I get message at end that tells me that my phone cannot be backed up on the laptop.

Something may be corrupt in your iTunes installation. The backup problem may or may not be related. The first step is reboot your system, disable your antivirus and firewall and try again. The next thing to try is completely removing iTunes and reinstalling: http://support.apple.com/kb/HT1925.
Also, if you used TinyUmbrella or Recboot as unauthorized apps to help with the update they corrupted your network settings on your computer. You will have to edit your hosts file and remove all references to Apple servers.

I cant access internet through ma black berry curve.

one weak back i bought ma new blackberry curve mobile. m new to it so m facing bit problem wth ma fone.can u please tell me how can i access internet. like other phones depends n GPRS so blackberry depends on which software. plz yar help me out of dis. thank u...

Under options>advanced>tci/ip punch in your carriers APN, make sure it is also showing edge or gprs on your network bar
Twitter: @IAmBenGiey | Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Try my apps:
The Ultimate Currency Converter and T2G - BloGFeed

Problems accessing internet through parallels desktop on Mac OS Leopard

I have recently installed parallels desktop on my Mac OS Leopard. I work for an organisation that requires us to use the Novell Services software, in order to access internet, shared folders Groupwise email etc.
The good news is that I have access to the server, hence the software works on the mac via windows XP, and I can use the Groupwise email. however, I cannot seem to access the internet using either firefox or explorer browsers. I have looked at the connections settings, security settings etc,. and no joy.
Has anyone had similar problems or suggest ideas on how i can solve the problem...
Its a nightmare having to use windows on the Mac, but its my only way so i can access the internet and email...
many thanks in advance for any suggestions.

This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and completely unrelated to Parallels
You should really consider posting issues with Parallels on the Parallels forums as they would be focused more toward the issue than an Apple forum.
http://forums.parallels.com

I installed a new airport express and made it part of my existing home network... now the PCs can't access internet through the airport extreme or the cisco access points

Everything works perfect with Macs, iPhone, iPads but I have 2 pcs that now can't access internet. The PCs connect to the airport and my other access points but no internet- The PCs sent an error of DNS

Yes, as we already said, it will do all of this if you have a good wireless signal reaching the bedroom.
Remember that an extender or repeater or whatever you want to call it can only extend the quality of signal that it receives.
The Ethernet signal that the Express delivers will only be as good as the quality of the wireless connection between the AirPort Extreme and AirPort Express.
If you have doubts, make sure that you understand the store's return policy before you buy.

How to access Internet through proxy server

Please help... I cannot get Internet access through a proxy server at work.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

E1200 - can't access internet through Tooway satelite modem

I have a working satellite system (Tooway, KA-SAT) set up. Linking a laptop direct to the satellite modem lets me access the modem itself (address of 192.168.100.1) and through that the internet and web. That all seems to be working correctly.
However, I simplly cannot get the E1200 to provide internet access.
In turn, I can connect the laptop to the E1200 (address of 192.168.1.1) whether by using a Cat5 cable or wireless and I can successfully change the various settings, save them and reboot the router.
On the router information page the settings are shown as:
Firmware 2.0.04 build 1 July 30, 2012
(IPv4) Connection type Automatic Configuration - DHCP
Internet IP address, subnet mask and Default Gate - all 0.0.0.0
DHCP Lease Time is blank
However, on the Setup page the settings shown are:
IP address - 192.168.1.1 with usual subnet mask of 255.255.255.0 and the start IP address ... 50 and range ... 50 to 99
DGCP server - enabled
Lease time - 0 (one day)
I've been through the process of resetting the router to default and then reentering or resetting this relevant data several times but to no avail.
When I connect the Cat 5 cable from the modem to the Internet access port of the router the light flashes, presumably indicating traffic between the modem and router. I'm running Windows 7 on the laptop. Wireless connectivity between the laptop and the router is 'excellent' but the router is shown as not having internet access. Same applies if I connect the laptop and the router using Cat 5 cabling.
It must be some minor error I'm overlooking despite having pored over everything for hours - or perhaps a faulty router. Laptop access using ADSL and another router entirely is perfectly straightforward whether wireless or by cable.
Lastly, I can see that the laptop IP address changes between 10.100.nnn.nnn (connected direct to the modem) and 192.168.1.nnn (connected direct to the router with the router also connected to the modem) so that appears to be working as it should.
Any help/advice would be much appreciated. TIA.
MurdochM

Thanks for the suggestions. In fact I took over the equipment from a colleague and as he'd had the router set to -254 I was hopeful your suggestion might fix things. Unfortunately, nothing has changed although following the update I both turned the router off for a while and checked that verything else was unchanged.
Basically the router continues to show No internet access when identified by Win7.
As for allowing routers, no, that's fine. As I say a colleague used it (for around ten months) and it came originally from the top-level ISP (then my colleague's ISP, though not mine).
It's a dynamic IP address on a standard lease, DHCP managed, and I can't set a static one (at least not on the ordinary package I'm on, though possible on some hgh-level ones).
As for the cable I made that up myself yesterday and I'm pretty sure it's OK. It's about 18m in length but as I mentioned there's no problem in my connecting the laptop direct to the moment, using that specific cable (as well as another older one of similar length I tested earlier) and that it connects the laptop to the modem and thence to the internet suggests to me that it's fine. In fact I'd earlier tried the same set up with a couple of different short cables and that didn't work either. I did wonder whether it should have been crossover but I was assured that wasn't the case.
MM

My Mac can access internet through my time capsule but can't find TC so I can set up time machine

I have an iMac and a MacBook.
I can access the internet with both Macs using my time capsule.
I can access the Time Capsule with my iMac and use it with Time Machine for backups.
I can't use my Time Capsule for Time Machine backup since my MacBook can't identify Time Capsule as a drive for this purpose.
Any suggestions on what I should do to have my MacBook recognize my Time Capsule for Time Machine use?
thanks

So the TC does not show up as an available drive at all in the MBP.. what weird things happen??
Use finder, go, go to server, and use AFP://ipoftimecapsule. (that being the IP address of the Time Capsule)
In router mode and at default it is 10.0.1.1 but check.
If it doesn't work tell us the IP of the TC .. and how it is setup, router or bridge.
IP of the mac that works, and IP of the MBP that doesn't work.
I am assuming you have done the more basic stuff.
Pondini might help you.
http://pondini.org/TM/Time_Capsule.html

Laptop can't access Internet through Westell 7500 router

My son came home from college with a laptop that is running Tiger 10.4.10. If he takes his laptop to the local library and uses the wireless network there, he can access the Internet. But, his laptop does not appear to work with our Westell 7500 router. He is getting an error message that says "There was an error in joining the airport network..."
The router works fine with our 10.5.2 (Leopard) iMac and it also works with PC laptops.
I checked System Preferences-Network- Show - Airport, under the TCP/IP settings. The IP address is set to 192.168.1.1, which is the address of our gateway. The router and DNS server fields are blank. The iPv4 field is set to configure manually.
I have tried putting the IP address into both the router and DNS server fields but this does not work.
I have searched the Discussions but there does not appear to be anyone with this problem who has this type of router. Does anyone know what the settings should be for the laptop and router to communicate?
MultiMacs

MultiMacs wrote:
The router works fine with our 10.5.2 (Leopard) iMac and it also works with PC laptops.
I checked System Preferences-Network- Show - Airport, under the TCP/IP settings. The IP address is set to 192.168.1.1, which is the address of our gateway. The router and DNS server fields are blank. The iPv4 field is set to configure manually.
It won't work if you try to give it the same ip as the router.
I have searched the Discussions but there does not appear to be anyone with this problem who has this type of router. Does anyone know what the settings should be for the laptop and router to communicate?
The easiest way is to get the settings from the iMac and put the same settings into the laptop. At least, that is a good start. How is your router configured? It is quite unusual to use "configure manually". Are you sure this is correct? If you're not sure, try "Using DHCP" instead. Leave everything else blank. See if that works.
It isn't really a question of which particular router but more of how the router is configured. That's why looking at the iMac which does work with your set up may be a good place to start.
Try those two strategies. If that doesn't work, let me know what settings the iMac is using.
- cfr

Can't get Time Capsule to access internet through 2wire router / modem with AT

I have internet service provided by AT&T Uverse. AT&T provides a 2 wire combination modem / router. My Time Capsule will connect to my internal network but will not connect to the internet. I have a steady green indicator light on the Time Capsule. Can anyone offer any assistance?

Time Capsule & AT&T 2Wire Gateway Model: 3800HGV-B
Instructions on connecting your Time Capsule to an AT&T 2Wire Modem Model: 3800HGV-B. I do know if these instructions will work for other models. Some 2Wire models require it to be set in “Bridge-Mode” or a “Router-Behind-Router”. The 3800HGV-B model does not have the ability to be put into “Bridge-Mode”. After hours of frustrating tech support calls, mine is finally working, so I thought I would share what worked for me. Why something like this isn’t already posted, I have no idea? Although I may not have all the terms correct, I think I can explain it in a way to help others the way I wish someone could have helped me. Something this simple, shouldn’t be so hard.
The Situation
Those with AT&T U-verse are unable to connect their Time Capsule to Network.
The Problem
Apple & AT&T’s Tech Support have failed to provide solutions.
The Solution
To configure the AT&T 2Wire with the Time Capsule the 2Wire must have its router disabled, in addition to disabling both the 2Wire and Time Capsule Firewalls. The goal is to get these two device to play well with each other. The challenge is that the 2Wire Modem is both a router and a modem. The Time Capsule is also a router, so they compete with each other, thus creating the headache many of us have experienced.
Step One: Create a wireless network.
Connect your DSL or cable modem to the Ethernet WAN port on your Time Capsule.
Open Airport Utility, select Time Capsule, and click Continue.
Follow the onscreen instructions to create your new network.
Once you have finished the above steps, make sure your screens look similar to mine. Once you have the Time Capsule set up according to the directions, you still won’t have internet connection. Be sure there is a “checkmark” next to your new newly created Network.
The Situation
This above process should have set the Time Capsule in a DHCP mode, thus making it ready to receive the signal/ IP address sent by the 2Wire.
Step Two: Allow DMZplus mode
    Open your web browser and enter the address http://192.168.1.254/ This will take you to the 2Wire settings. Select Settings, click Applications, Pinholes, and DMZ. At the bottom of the page, select Allow all applications (DMZplus mode). Click Save.
Note: Once DMZplus mode is selected and you click save, the system will issue a new IP address to the selected computer. The computer must be set to DHCP mode to receive the new IP address from the system, and you must reboot the computer. If you are changing DMZplus mode from one computer to another computer, you must reboot both computers.
The 2Wire Wireless Setting must be disabled. You don’t want the 2Wire to broadcast its wireless signal. You must shut off the “Router” abilities of 2Wire. In the U-verse 2Wire Settings, select the Firewall tab, click Applications, Pinholes and DMZ. At the bottom of the page select the radio button which Allows all applications (DMZplus mode).
You will know when you are successful at shutting the wireless down by selecting the Airport Signal in the upper right of your screen. If you see a network called 2Wirexxx, then your 2Wire is still broadcasting its signal.
The Time Capsule is setup in the DHCP mode, but isn’t able to get the IP Address because there are 2 Firewalls to address. There is the firewall of the 2Wire and one for the Time Capsule.
Step Three: Disable the Firewall.
    One thing all the other tech’s missed, was unchecking the “Enable default host at”. Your screen should look like the below screen shot, because this disables the other Firewall that is giving you trouble. Be sure and Update after you make your changes.
    Once the changes are complete, turn the Airport off. Shut down your computer. Unplug the 2Wire and the Time Capsule and let them sit for 5 min. Next, plug the 2Wire up first and let it begin its reboot process. Then, plug in the Time Capsule and let it start to reboot. Finally, turn on your computer and open Airport Utility.
   Finally, after a complete reboot of the system, try to connect the internet. You should now be capable of opening your system and enjoying your online experience.
I hope this helps!

Safari not able to access internet through wifi after updating iphone 3gs with ios6

i have updated my iphone 3GS with ios 6 and initially my wifi worked fine but for some strange reason it stopped connecting to internet even though its connected to my home wifi i have and tried and failed with all the possible solutions given in this forum i am able to use safari with my cellular data network but with wifi its not working please provide me with a solution

well, first check whether you're connected to the blackberry network...
how can I check whether myself connected to blackberry?
Check within the network bars on the phone whether it is showing you 3G, EDGE or GPRS in capital letters...!!
If not give a hard-reset to the phone (remove the battery put it back once)...
And if it shows in caps letters then try requesting for services again... how? on the phone desktop > within the search bar > type "Host Routing Table".... search results shows you as "options"... select that & select host routing table... afterwards, hit the blackberry menu button > select register...
.RoCkInG dUdE.
Trust Your Technolust | Do not PM for any support
If a solution received, please hit on to show your support.

Access internet through abap

Similar Messages

Maybe you are looking for