Access key error for ABAP user in Development

Hi,
I am getting the following error while entering the development access key for Development client 103

Syed Amir Ijaz Bukhari wrote:
i get this key from SAP Market place my basis administrator generated it at front of me but still it is not working as if i place it in IDES it worked but not in Development.
Compare the installation number of your IDES system with that of your development system. Do you see? They're different. Different installation requires a different key. Go and have another chat with your basis friends.

Similar Messages

Access denied error for Read user in sharepoint 2010

Hello,
In sharepoint 2010 subsite a user with Read permission getting Access Denied error while login.
Few points:
1. Master pages are approved not in pending status.
2. Site permissions are not inherited.
Please suggest the way to resolve it.
Thank You,
Santosh_09

Check below threads for troubleshooting access denied issue. You can use fiddler to trace what is causing access denied.
http://sharepoint.stackexchange.com/questions/75263/user-has-correct-permissions-for-subsite-but-access-is-denied
http://sharepoint.stackexchange.com/questions/41225/user-permissions-access-denied-sharepoint-2010
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

IW32- order-print is giving error for particular User.

Dear Friends,
IW32- order-print is giving error for particular User and output type. Debugging authorization restricted on the system, hence I canu2019t trace out the problem. If anybody comes across such issues, please reply to the post.
Thanks In Advance for your reply.
Anil Dasari
Thanks In Advance.

Hi,
Information about dump:
1. User and Transaction:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          06.05.2011 10:47:40
     MM Used. 13116304
     MM Free. 3639760
User and Transaction
     Client.............. 700
     User................ "BLADEF01"
     Language key........ "N"
     Transaction......... "IW32 "
     Transactions ID..... "4DC387ECA12B684DE10000001A5B1803"
     Program............. "/MRSS/SAPLRSG_PM_ORDER"
     Screen.............. "SAPLCOIH 3000"
     Screen line......... 33
Information on where terminated
     Termination occurred in the ABAP program "/MRSS/SAPLRSG_PM_ORDER" - in
      "/MRSS/RSG_MAINTAIN_MRS".
     The main program was "SAPLCOIH ".
     In the source code you have the termination point in line 441
     of the (Include) program "/MRSS/LRSG_PM_ORDERU04".
2. Info. Where it got terminated.
Information on where terminated
    Termination occurred in the ABAP program "/MRSS/SAPLRSG_PM_ORDER" - in
     "/MRSS/RSG_MAINTAIN_MRS".
    The main program was "SAPLCOIH ".
    In the source code you have the termination point in line 441
    of the (Include) program "/MRSS/LRSG_PM_ORDERU04".
3. How to correct the error.
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "/MRSS/SAPLRSG_PM_ORDER" or "/MRSS/LRSG_PM_ORDERU04"
    "/MRSS/RSG_MAINTAIN_MRS"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1.1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2.2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3.3. If the problem occurs in a problem of your own or a modified SAP.
I have been searching for notes recently implemented for IW32.
Thanks and Regards,
ANIL DASARI

Access key invalid for request

How can I resolve this exception?
Servlet failed with Exception
java.lang.IllegalArgumentException: Access key invalid for request
at com.bea.wcp.diameter.sh.ShSession.createRequest(ShSession.java:40)
at com.bea.wcp.diameter.sh.ShSession.createPUR(ShSession.java:26)
at com.bea.wcp.diameter.sh.ShApplication.putDocument(ShApplication.java:147)
at com.bea.wcp.diameter.sh.WlssShApplication.putDocument(WlssShApplication.java:79)
at com.bea.wcp.profile.ShProviderDirect.putDocument(ShProviderDirect.java:63)
Truncated. see log file for complete stacktrace

Hello David,
Could you please post the entire exception trace here?
Also, is this related to your post :
http://forums.bea.com/thread.jspa?threadID=300005777
If so, could you point to the link from where you are trying this example?
Another thing to try would be invoking this sample using a SIP message instead of http. I see from the other trace that the putDocument is being invoked from a http context.
thanks,
Mihir

Doesnot ask for access key. error No authorization for the 'S_DEVELOP'

Hi,
After applying patches,in transaction F-43 one of the field Inv Recd Date( BSEG-ZOLLD) is not getting displayed.
after analzing we found that ZOLLD is not there in screen SAPMF05A(0302).
in my development server when i try to change the screen it says "You have no authorization for the authorization object 'S_DEVELOP', which would allow you to change the screen concerned"
my profiles contains sap_all and sap_new rights even then I am getting this error.
Why doesnt it ask for access key ?
Kindly guide me .
Regard

> Please check in Su24, if iy has S_develop object or not,
In SU24? why? and what or who is "iy"?
> since you say you have SAP_ALL access please regenerate SAP_ALL its a composite profile this should work fine.
What does the fact that it is a composite profile matter? Besides that I've already made a remark about regenerating it.
> But you need to check at SU24 against f-43 whether S_develop missing or not,if missing please insert manually
Ehm, do you really think the SU24 settings for a transaction influence the changeability of it's underlying screens/programs etc? It will not matter at all what you do with S_DEVELOP in SU24.

Is SAP Access Key same for edit of PCBURZ990??

Dear Experts,
I am new to payrol custome function (i.e pe04),after reading materials from this site,i started to develop payrol function but when i try to edit PCBURZ990 program in se38,i got access key required message and i entered same key which i got for abap development,but it is not accepting that key.
So i want to know,is it possible abap developement and PCBURZ990 have differenet access key..
Thanks & Regards
Anwar

Hi,
Getting Access key for objects is usually the job of the Basis consultant/Project Admin.
so contact them with the object name and the system installation number, they will get it for you.
Regards
Karthik D

Help in creating first Web DynPro object on 7.4 Trial. Access Key Error

Hi, I have an NetWeaver 7.40 instance (release 7.9.08.005) running on the aws. I have successfully converted the system from initial state to DEMOACCESS.
However, I cannot create a new Web DynPro object. The dialog asks for the access key. I have already installed the NPL license earlier.
I went through the steps to find what the user DEVELOPER's access key was by looking at the DB table. When I put that access key in this dialog, it says it is invalid.
Is Web DynPro development available as part of the trial instance?
Thanks,
Allan

Thanks for quick reply. I was indeed logged in as the DEVELOPER user. That was not it.
I found the answer... the test component was named incorrectly. I tried to start with 'MyComponent' and that seems to be a reserved namespace. I used 'ZMyComponent' and all was fine. I even went through the tutorial below successfully.
https://help.sap.com/saphelp_nw70/helpdata/en/e6/2c4b29dc87c6409d6469ec390e8f3d/content.htm?frameset=/en/ed/1228b7a2e9c44a9b2822636a98a850/frameset.htm
Maybe I need the basic info on what object namespace is allowed for this trial release if anyone knows? I vaguely remember seeing something about that when I saw the license page a while back.
Until next time! Thanks.

Access denied error for Java application on 2630

Hello!
I have bought a 2630 recently. Now I have installed a small Java application that tries to store some data in the phones memory. However, each time the application tries to do so, I get a "java.lang.SecurityException Access denied" message and the application states that it could no save its data. I have set the security settings for that particular application so that the phone should ask before each access to the file system. In fact, before I get the error message, the phone asks whether the application may write data to the file system. But still answering that question with "yes" I get the Access denied error message. Now I am puzzled. By the way, the application uses JSR-75 which the 2630 should support.
Anybody any ideas?
Regards,
Volker

RESOLVED!
I was able to create file from java application on Nokia 2630. Here is how:
1. root C:/ is mapped to folder "Downloads"
2. The folders does not show with their names
3. there are 2 folders in C:/ predefgallery and predefjava
4. in predefgallery there are several predefined folders e.g. predefrecordings is one of them
5. I am able to create file inside predefrecordings, creating file in upper folders is denied
6. user created folders aro NOT shown at all
7. I had to manualy confirm reading of data many times and writing data once.
I hope this can help to other Nokia users since I did not find this anywhere.
Luke

Access Denied Error For Shared Folder with Win Server 2008R2 Task Manager Scheduled Task

Hi,
I have scheduled a Task with the Task scheduler. It invokes an .EXE file after every 5 min.
The application is supposed to access some files lying on a different Server's shared path, process them and move them across folders on the Shared path only.
Problem: When the .EXE gets executed from the Task scheduler, I am getting "Access Denied to the Shared path" error. I have already given Full Control to Everyone as well as to the Account with which the Task has been configured with.
Another important point to note is, if I run the .EXE manually, the solution is able is able to do everything intended; I don't get any Access Denied error.
Kindly help me with what needs to be done in order that this issue is resolved. This is really urgent for me.
Thanks a lot in advance..
AC

Hello Alex,
first of all, make sure your task was correctly create: How to Create Advanced Tasks with the Task
Scheduler.
Please, read these:
TechNet Library Task Security Context
TechNet Forums post How
does "Run with the highest privileges" really work in Task Scheduler ? - Look at the answer "...When you want to run a program with admin rights from a standard user account, you have to select "run whether the user is logged
on or not" and select a user which is member of the admingroup."
TechNet Forums post
Log on as batch job right (written on previous post)
serverfault Task Scheduler is not executing the program
serverfault
unable to schedule a task (access denied)
UAC: Do you receive the User Account Control "Windows need your permission to continue" message to approve the scheduled application ?
If yes, maybe "Run with highest privileges" option will not take precedence of the UAC. While the Admin Approval Mode for built-in Administrator account is enabled, UAC will still ask for approval according to the settings on the Behavior
of elevation to prompt for the administrators. Check whether the "User Account Control: Admin Approval Mode for built-in Administrator account" is enabled. If yes, disable it or change the setting on "User Account Control: Behavior
of elevation to prompt for the administrators" to elevate without prompting.
Local Computer Policy ---> Computer Configuration ---> Windows Settings ---> Security Settings ---> Local policies ---> Security Options (source: Task
Scheduler "run with highest privileges": does not work on Windows Server 2008 ?)
Bye,
Luca
Disclaimer: This posting is provided AS IS with no warranties or guarantees, and confers no rights. Whenever you see a helpful reply, click on [Vote As Help] and click on [Mark As Answer] if a post answers your question.

Oracle Migration Tool giving Access denied error for Read operation

Hi;
Oracle Migration tool is giving access denied error when we are trying to Read a record for Access Profiles.
We are getting (SBL-ODS-50085) error.This is happening only for few records(Access Profiles).
Although the user role is administrator having full access and privilege (Manage User and Access checked).
Pl. help me resolve the issue.
Thanks!

Hi,
Does it happen when you try to read "any" Access Profile?
If yes, please have a look at the
"Admin: Users and Access Controls - Manage Users and Access - Manage Users and establish User Quotas. Define Access Profiles, Roles and Groups to manage data access controls." privilege in the role of the user you use for migration.
In order to avoid any problem, I usually create a "Migration" role temporarily and assign this role ALL the privileges to avoid such failures at the time of export.
Hope this helps,
Best regards,
Charles DUBANT.
http://www.dubant.com/

SSL: How to use the same key pair for ABAP & JAVA?

Hello,
I want to setup an XI (3.0 on Netweaver04)installation in the way, that ABAP AS and JAVA AS use the same key pair for SSL. My problem is to define the same private key on ABAP and JAVA. With the JAVA Administrator I am able to define or import a private key. But I could not find a possibility in ABAP to manage private keys in order to use the same on as in JAVA. What is the procedure for this?
Thanks and Regards,
Frank Tottleben

Hello,
I want to setup an XI (3.0 on Netweaver04)installation in the way, that ABAP AS and JAVA AS use the same key pair for SSL. My problem is to define the same private key on ABAP and JAVA. With the JAVA Administrator I am able to define or import a private key. But I could not find a possibility in ABAP to manage private keys in order to use the same on as in JAVA. What is the procedure for this?
Thanks and Regards,
Frank Tottleben

Lyncdiscover reports HTTP 500 Internal Server Error for external users

Hello,
I have a problem providing lyncdiscover information for external Lync users. The same address works internal (prompts for file download) so I believe the problem is UAG/TMG providing the site which is not my cup of tea. I have a working external lyncdiscover
for other domain in the same Lync + UAG/TMG server environment. I have also checked the public DNS records few times and everything should be fine. Firewall also shouldn't be an issue since it reports the internal server error, right? Any suggestions what
should I check?

more information based on Lync Autodiscover Web Service Remote Connectivity Test.
Testing HTTP authentication methods for URL https://lyncdiscover.domain1.com/Autodiscover/AutodiscoverService.svc/root/user.
HTTP authentication methods successful.
Additional Details
Testing HTTP content for URL https://lyncdiscover.domain1.comi/?sipuri=[email protected] has
token="User".
HTTP content isn't verified.
<label for="testSelectWizard_ctl12_ctl06_ctl00_ctl04_tmmArrow">Tell
me more about this issue and how to resolve it</label>
Additional Details
HTTP 200 status received from server, but no token="User".
Elapsed Time: 203 ms.
The same result goes for the other domain that provides the lyncdiscover information correctly for external users. It doesn't seem to solve the root cause but might help to understand
the problem.

Portal Runtime Error for WPC user

Hi experts,
I assign wpc_editor_role for my user. But he is getting Portal Runtime error everytime he try to create link list/teaser/paragraph, publish webpage, finish webpage. The error is as follows:
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 10:55_27/05/09_0002_21582350
Refer to the log file for details about this exception.
For your information, the WPC is working fine for administrator ID. Please help me to solve this problem.
Rgds,
Nanie Arianie

Nanie,
Please ensure that you have the permissions set as per this help.
[Defining Permissions in the Portal Content Studio|http://help.sap.com/saphelp_nw70/helpdata/EN/45/f91dd13c7a04aae10000000a114a6b/content.htm]
[Setting Initial Permissions for Folders|http://help.sap.com/saphelp_nw70/helpdata/EN/a6/78aa5c2ab64c1d83db59a25793e9eb/content.htm]
This should ensure that your issue is taken care of.
Good Luck.
Cheers!
Sandeep Tudumu

How to restrict access to views for some users in the app?

Hi SDN!
I have an WD application wich embedded in the portal. Appication has 2 iViews (and 2 pages respectively). These iViews consist several views connected with each other (e.g. one view provide list data, second view is add/edit form for this data). I need to restrict access for some users for view with add/edit form. I can't make separate page for this view.
What I've done:
1) create yet another UIContainer for this view in main window and embed view to this container. It was be done for create separate iView for form.
2) in the portal I create iView for this form but don't embedd in any page.
When I try to call my form from list data (that is one iView from another) I get exception:
<b>com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: duplicate usage of view .MyCarRentalAddCity</b>
Is there a way to get needed functional?
Thanks,
Lev

Hi,
do you need to remove the IView from the portal menu or do you just want to make a View container in your WD application invisible if the user doesn't have the rights to see it.
If so, you could create your own roles on the app server:
You need to create a new class that extends NamePermission like:
import com.sap.security.api.permissions.NamePermission;
public class ApplicationAccessPermission extends NamePermission {
           * @param name
          public ApplicationAccessPermission(String name) {
               super(name);
           * @param name
           * @param action
          public ApplicationAccessPermission(String name, String action) {
               super(name, action);
Also, you have to create an Action.XML file that looks like this:
<BUSINESSSERVICE
     NAME="com.vendor.administration">
     <DESCRIPTION
          LOCALE="en"
          VALUE="actions view usage"/>
     <ACTION
          NAME="View Permission">
          <DESCRIPTION
               LOCALE="en"
               VALUE="Show view"
               />
          <PERMISSION
               CLASS="com.vendor.utilities.ApplicationAccessPermission"
               NAME="ShowView"
               />
     </ACTION>
</BUSINESSSERVICE>
If you have created these to files in your packages, you can access this function like:
IUser user ;
try {
          user = WDClientUser.getCurrentUser().getSAPUser();
          if(user.hasPermission(new ApplicationAccessPermission("Show view"))){
               wdContext.currentV_UIElement().setViewVisibility(WDVisibility.VISIBLE);
          }else{
               wdContext.currentV_UIElement().setViewVisibility(WDVisibility.NONE);
     }catch (WDUMException e1) {
          wdContext.currentV_UIElement().setViewVisibility(WDVisibility.NONE);
                e1.printStacktrace();
You have to bind the ViewVisibility attribute of the context to the View Container you want to hide.
The applicationAccessPermission you defined in the XML File will be visible in the UME Manager of you J2EE engine. With this action you can create a new role and group that you can map to the users that should see you view.
But, the exception you get is because you have embedded one view twice, which is not possible.
Hope this helps.
Regards,
Dennis

With the new seession in IE gives session error for new user

Hi,
In new opened IE if i tries to login with new user. It is switching b/w the files in the status bar(ie., Header1.jsp and ListServicecall.jsp simultaneously) and at end the session error result will arise.
But for the second time if i login with the same username/password the page is displaying properly. please Can any one help out.
Thanks,
Satish R

First time if the user logins to IE in the HP Service Desk(SD) page. Some of the pages will iteratively loops and give a session expires error. After that the user logins to the page with no error.
If i create a new copy of the data from the existing folder and if i try to run then the result will be error for that folder also.
ie., Assume folder 123 where, first time for every new login user the session expire error occurs. later they'll login without any problem.
If i rename the folder 123 to xyz/create new copy and rename then, the same problem repeats. First time for the new user it will give session expire error and later he can login to the HPSD page with no error.
Is it require cookies to be programmed in that program.
Regards,
Satish R

Access key error for ABAP user in Development

Similar Messages

Maybe you are looking for