Access key for include

Dear Friends,
I need to make changes in an include.
Should i ask basis people to give access key for include program or main program?
Thanks.

Hi,
Check this:
Re: HOW TO MODIFY SAP STANDARD FORM
Rgds,
Raghu

Similar Messages

  • Do We need access key for Additional Data B in VA01

    Hi all,I have to add fields in Additional Data B,I have searched SDN about it and came to know that it is screen '8459' of program 'SAPMV45A',but it is asking key for that,is it safe applying access key for this screen?
    Thanks in advance.

    >is it safe applying access key for this screen?
    yes it is safe. SAP provided the screen 8459 only for adding our own custom fields to it. For this you need access key for the first time. along with that you need access key for
    PBO include, PAI include
    MV45AOZZ ,MV45AIZZ .
    check it once.

  • ABAP Access Key for Table change mode MCVKUSR & MCVBAPUSR in SE11

    Dear All,
    I'm using SAP ECC6.0. I want to create a new database table in the dictionary to be used in my programs. I proceed in the following way:
    1.  I run the SE11 transaction
    2.  At the first entry I write the name of the table to be Change created ( Display mode Showing )
    3.  I click on the change button.
    4. It will ask for Access Key
    But then the system asks me an Access Key , where can I get this?
    I have SAP License Key.
    DB Table Name : MCVBAPUSR & MCVKUSR
    Please Let me know
    Thanks in advance,

    Dear ,
    I go to Service market Place site, from SSCR Tab then I have to select a object from the list is TABL.
    and enter the Particular Object & Table Name . Now I got it Access key for Particular Object.
    Thank you for your quick Response.
    Once again Thank u.
    Regards
    Thomas.T
    Edited by: thomas_raja on Jun 5, 2011 6:24 AM

  • Regarding the access key for an object

    HI all
    Please clarify me the doubt that an access key will be different for each and every object or one for all the objects.
    regs
    karna

    Hi karna,
    1. It will be different for all objects.
    2. In fact, access key will be different
        for each object,
       and that too, for each different installation number
       as well as each basis version number
    <b>3. In short, access key is dependent upon the combination of
    1. The object R3TR FUGR SFES    
    2. Sap Release (eg. 640)
    3. Installation Number</b>
    4. It means that the access key for one standard program
       (in our server),
       will not work in another server bcos the installation number will be different.
    regards,
    amit m.

  • Access key for ABAP

    Hi all,
    I need to create program of ABAP. It need access key for creating. How to get access key?
    Please advice,
    Duypm

    Hi Duypm,
    You have to register the user as developer.
    Login to the service market place            service.sap.com
    Keys & Requests -> SSCR keys ->Register Developer-> give the user id and from below select the installation number and click on register you will get the key.
    Use that key when prompted in sap.
    Regards
    Ashok Dalai

  • Regarding access key for modify predifined fm in SAP IDES System

    hai to all,
    How can i find
    access key for modify predifined fm in SAP IDES System
    i have sap 4.7 dump(IDES)
    please give reply asap.
    thanks in advance,
    regards,
    surya.

    Hi Chandran,
    Thank you for the reply,
    how can i access this site, its asking username password,
    i didn't have both of these and even i'm unable to register also.
    how can i access.
    please respond
    regards,
    surya.

  • How to Create ACCESS key for different users

    How to create or generate an ACCESS KEY which is required to make changes to the table V_FAGL_ACTIVEC (For New General ledger) for IDES 6.0. Is it created in table DEVACCESS, if so where or is it created in SU01 where user id's are maintained. Since I am working on IDES, I thought probably we can create it for each user in SU01, but dont know the steps to do it. Please help me. It is urgent.

    Hi
    ACCESS KEY - First of all its provided by SAP. You can get the key from http://service.sap.com -> SAP SUPPORT PORTAL -> Keys & Requests -> SCCR Keys -> Registration. Here u can register a DEVELOPER or an OBJECT, by this time SAP will give the ACCESS KEYS.
    **Note : To access http://service.sap.com u should have S number login or like that.
    Only after obtaining that ACCESS KEY, SAP will allow the DEVELOPER to create some objects or change or modify Delivered objects.
    Why ACCESS KEY - For creating or accessing any object some one should be responsible. Suppose, any issue arises with an object then can easily track the details who has created or modified.
    Reward with suitable points

  • Access key for the Object  !!!

    Hi,
    In the ABAP Trial version 7.0, while I am trying to create a sample database table 'MYTABLE'  through SE11 it is prompting to register object of R3TR and asking for access key..
    From where I can get the access key for this trial version7.0? How can I proceed? Please help me.
    Regards,
    Praveen
    (ABAP-Beginer)

    Hi,
    Actually i am not the best person its a basic question anybody in this forum can answer.
    i am giving u  a link which i got  from Raymond Guiseppi
    Check this link.
    http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
    Forum is there to help you.
    Best Regards,
    K..P.N

  • Access key for NetWeaver 2004s trial version

    Hi,
    I've installed the trial version of SAP NetWeaver 2004s. When I try to create a new function module, it asks for the access key. How and where can I get the access key for the trial version?
    Please help.
    Thanks
    Raam...

    Hi:
    Apparently the developer license is for the user id "bcuser".  You should work under that user id.
    From http://www.sap.com/platform/netweaver/minisap.epx :
    "...you will also need a developer key when you try to change a repository object in the workbench. Enter: 29671482393151224771".
    Thanks for any additional points you choose to assign (...the more the better
    Best Regards -
    Ron Silberstein
    SAP

  • Access key for SAP 4.6C IDES

    Hi,
    Can any body send me the access key for SAP 4.6C IDES?
    I am unable to proceed further because of it.
    Please mail me that if you have to:
    [email protected]
    Regards,
    lokesh

    Hi
    You have to ask the person from whom you got this software of SAP IDES
    He will provide the Access key.
    Reward points for useful Answers
    Regards
    Anji

  • Access Key for CAS

    How can i get access key for CAS?  I am using NWDS SP15 on NW04 SP15 sneak preview.
    Thanks in advance

    Hi Ravi,
    please send me an e-mail: [email protected] Thanks.
    Regards,
      Jan

  • Access Key for Trial Version Web Dynpro ABAP 7.01 and  7.02

    Hi Guys,
               Can someone tell me, what is the Access Key for Trial Version Web Dynpro ABAP 7.01 and 7.02
    Regards
    Sankar

    >
    sankar.cgsl wrote:
    > Hi Guys,
    >
    >
    >            Can someone tell me, what is the Access Key for Trial Version Web Dynpro ABAP 7.01 and 7.02
    >
    >
    >
    > Regards
    > Sankar
    HI Sankar,
    I think it is not to get from this forum. You have to download the trail version and follow the instructions for installation.
    Once you installed the software, you can request for the License key with your SCN credentials.
    Follow this link for 7.02 Trial [/people/horst.keller/blog/2010/12/09/abap-trial-version-702-available-in-scn|/people/horst.keller/blog/2010/12/09/abap-trial-version-702-available-in-scn]

  • Where can I find an Access key for the user with "AS ABAP sneak preview" ?

    Hi all,
    I have installed AS ABAP sneak preview on my laptop.
    I use username "bcuser" and password "minisap". when I try to create some objects like, i.e. Function Group for Function Module, then it ask for an access key.
    Where can I find an access key for this ABAP SNEAK PREVIEW for user "bcuser"?
    I have gone thru some documents, I know we need to register user in OSS and need to get an access key from the marketplace but can I register this user "bcuser" or it's already register? I need some more specific information to resolve this issue.
    Please advise me on above question.
    Thanks,
    Haresh Solanki

    Hi Rich,
    I have entered ZH_XYZ as a Function Group name to create a new function group. While I am creating it, it asks for the Access Key. I tries to enter an Access Key here for the first time and it says wrong entry for access key.
    Also if I try to create new Function Module, it ask me to select the Function Group. As I couldn't create a new Function Group, I tried to select from existing(from SAP System's FG), still it asks for an access key, I enter the an Access Key here, then also it says wrong entry.
    I really got confused with this Access Key thing, can you provide me some insights?
    Thanks,
    Haresh Solanki

  • Accelerator/Access Key for commandLink problem

    I tried setting the access key for a commandLink but all it does is put the focus the command link and not trigger the action(unless enter key is pressed after pressing the access key). Is this the expected behavior or there is a way to make access keys execute action on commandLink?

    Hi Hyangelo,
    Even i am facing the same problem . I am using Jdeveoper 11.1.1.3.0 . I am having a commandLink , menu and commandNavigationItem , I am trying to access the component with accesskeys like giving ..
    <af:commandLink id="cl_onpage" partialSubmit="true"
    textAndAccessKey="#{ARUIBundle.Hello}"
    action="#{AccessBean.trigger}"></af:commandLink>
    wherein my accesskey is defined in my property file and it is 'H'. As i am using internet explorer i use alt + H as key combination . When i use the key combination , Only the focus is set to the component and the action with it is not getting triggered unless i hit the enter key.
    Can you let us know as to how you solved the issue . As you said it was taking a while for the action to be triggered. I tried the same , waited for 5 minutes but still the action did not get triggered.
    Thanks
    Vini

  • Experiment submission failed. Request ID: ID . Please resync the access keys for storage account mystorageaccount

    I am trying to run Sample 1 in the Azure ML studio. I have created a Standard workspace and it is linked to a Storage account. When I run the experiment, I get the error
    Experiment submission failed. Request ID: <ID>. Please resync the access keys for storage account <mystorageaccount>
    I'm not sure how to resync the access keys. I've regenerated my access keys and workspace auth tokens but that did not work.

    I figured it out. Needed to go to the Azure Portal, choose the Machine Learning service, then click Manage Keys at the bottom.

Maybe you are looking for

  • Need Inputs on ECS and XSD modifications

    Hi All, I need some inputs regarding the modification of ECS and XSD. Following are the details. In our production environment, we have already deployed the ECS and XSD and there are around 20 TP set-ups and configurations using that ECS and XSD for

  • An error occurred in the PD layer; transaction terminated in SC

    Hi experts, I have an issue like this "An error occurred in the PD layer; transaction terminated". This error came when i save Shopping Cart. Just for the information, I have maintained number range assignment for BUS2121 - Shopping Carts also. And I

  • How to know the Disconnection point?

    Hi all, I'm trying to figure it out this. During the Chat session in IC, is it possible to know : 1. if the disconnection caused by the Internet connection line 2. Customer hit the 'End Chat'  button Anybody worked on it or having some idea? Thank yo

  • Podcast episode name change...?

    How do I change the name listed for my podcast? in the isting it's taken the name of the original blog post (which I wasn't aware that it did). I've since changed that blog entry's title to fit what I want it to say, but iTunes has not updated the Na

  • Zen Micro and Windows 2000 why wont it read play

    I have a laptop with XP on it and a workstation with Win 2000 on it. I installed the drivers and software on both from the CD provided with my 6 GIG Zen Micro. My laptop reads it fine but my workstation does not read it at all I have installed evevry