Access Level of the workflow at which customizations should be done

Hi I want to make changes to the OM workflow processes. I want to create a copy of seeded workflow processes and make changes to them. I want to know the access level that I should set before making changes. The workflow processes come with a seeded access level of 20

- In Workflow Builder, click Help/About
- Change Access Level to 0
- Check radio box for allow modifications of customized objects
Some of the seeded workflows were intended to be read only and you may need to copy/paste the process to a new one which will have your same access level.
- Copy the existing process
- Paste to Processes to create a new process
- The new process will be created at your current access level
- Make the desired modifications to the new process
Please consider Oracle support policy for customizing predefined workflows. For more information refer to Note: 97381.1 (Supported and Unsupported Customizations for Predefined Workflows).

Similar Messages

Frequency at which compression should be done

Hello Experts,
I have a process chain running in production which is scheduled twice on a daily basis. The service report provided us a recommendation to compress the data in the cubes which are a part of this process chain.
I would like to know at what frequency /intervals should I compress the requests.As in should I go on for Monthly/Weekly compression or should I be going for a compression each time the load is run?
The data load pattern on a daily basis is :
1st data load :around 50K records are loaded
2nd data load :around 3L records are loaded
4 mins difference b/w the 2 loads.
Could someone kindly provide some basic guideline on which I can proceed on this.
I have checked the sdn posts but have not been able to get an answer on the frequency at which compression should be done.
Regards
Dipali

Dear Dipali,
Please have a look at below points.
. You can schedule compression as part of a process chain.
Compressing one request takes approximately 2.5 ms per data record.
With non-cumulative InfoCubes, compression has an additional effect on query performance. With non-cumulative InfoCubes, the marker for non-cumulatives is also updated. This means that less data has to be read for a non-cumulative query which reduces the response time.If you perform compression for a non-cumulative InfoCube, the compression time (including the time to update the markers) is about 5 ms per data record
So, Take an acount of this step to Compres the Data. Go for a weekly basis...and when the load times are not running....also u can schedule in Back Ground Job as well..
Also,
For performance reasons, and to save space on the memory, compress a request as soon as you have established that it is correct and is not to be removed from the InfoCube.
Hope this helps u...
Best Regards,
VVenkat..

I have a airport time capsule, an older airport extreme, and an airport express. I want to hard wire my Mac Mini to the network. What is the best arrangement of the devices? which ones should be hard wired to optimize extending the network?

I have a airport time capsule, an older airport extreme, and an older airport express. I want to hard wire my Mac Mini to the network. What is the best arrangement of the devices? which ones should be hard wired to optimize extending the network?

I am using TM Unifi with an ASUS RT-N18U Wi-Fi router. I would like to know could I use Apple AirPort Time Capsule to extend (repeater, booster) my Wi-Fi to a part of the house where the Wi-Fi signal is poor
Yes,, if you plan to connect the AirPort Time Capsule to the ASUS router using an Ethernet cable connection that will remain fixed and permanently installed at all times.
No, if you were planning to have the AirPort Time Capsule connect wirelessly and extend the Asus WiFi signal, since it would not be compatible with another manufacturer's router for that purpose.
Another way of saying the same thing here would be that if you want to extend the network wirelessly, it will take two Apple routers to do so

I updated Pages two months ago, yet my gmail program will NOT send out a pages document and a pages file I saved to desktop will NOT open and a box pops up telling me it won't open document without the Pages upgrade WHICH I HAVE ALREADY DONE...PLEASE HELP

I updated Pages two months ago to the latest version. BUT, my MAIL program will not allow me to send documents I attach that are genereated witht eh update Pages. And, when I save a doc to desktop generated in Pages, it will not opena, a box pops up and tells me the it wil not open until I have upgraded to the new PAges, WHICH I HAVE ALREADY DONE!!! What is UP with this, can anyone please help me? Would GREATLY appreciate it.
SA

Pages 5 is in a new format that is not compatible with GMail, Google, Amazon, DropBox and other 3rd party servers.
Peter

HT1212 Hello, for some reason i'Ve lost the ability to access my ipad, although i know the password, the ipad now is deactivated and telling me to connect to iTunes, i've done so but itunes can not access it anyway. Please tell me what should be done to r

Hello, for some reason i'Ve lost the ability to access my ipad, although i know the password, the ipad now is deactivated and telling me to connect to iTunes, i've done so but itunes can not access it anyway.
Please tell me what should be done to retrieve my photos on ipad before reformatting it.

Unless you've done anything to change it, Google keeps every email that ever passes through their server in your All Mail folder/mailbox/label. Even if you delete stuff, they hold onto it, there. You have to go out of your way to actually delete anything permanently.

I have a macbook 2006 its hard drive was not working anymore so i install a new 500GB hard drive but now i just need the software. Which one should i buy?

I have a macbook 2006 its hard drive was not working anymore so i install a new 500GB hard drive but now i just need the software. Which one should i buy?

Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
You can buy Snow Leopard at:
Snow Leopard disc source - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
You could contact Apple Support and see if they have the original discs for that machine but it would be 10.4.11 and there's no reason not to go to at least Snow Leopard, especially since the 10.6 discs would probably cost the same as a replacement set of 10.4.11

Pls its very urgent - i dropped by iphone 3G and the display became very dim soon after and it still remains the same - pls advise what should be done to bring the display back to normal

Pls its very urgent - i dropped by iphone 3G and the display became very dim soon after and it still remains the same - pls advise what should be done to bring the display back to normal

sounds like you broke the display when you dropped it. There's nothing we users here can do for you.
Since the iPhone warranty does not cover accidental damage, you will have to pay to have your phone repaired or replaced. You can bring it into Apple for an out of warranty exchange in the country of purchase, or you can find a 3rd party iPhone repair store in your area.

How to skip the Analysis level in the workflow for manual investigation?

Hi Experts,
My requirement is to bypass the Analysis level for manual investigation in the workflow template number WS15100038. I tried to set the 'skip first decision step?' step as true to bypass the analyst level by setting the container element "IMMEDIATE_LEVEL1" as 'X' then I created a claim but it still went to the analysis level . Not sure what i'm missing. Help, pls!

Hello !
Take the copy of the standard workflow and delete the analysis step(container step too).
Now save and activate the workflow.By this way, you will able to accomplish the requirement.
Regards,
S.Suresh

Regarding the workflow notification page customization

Hello Everyone...
I am new to Oracle OAF...
Customize the Oracle Workflow Notifications page (for Open Notifications) by using OA Framework Customization (to display more details on the Notification)
what is solution for this component?
could someone help me out in this task plz...

You need to check how the notifications are getting created. Please download the workflow from instance and check the logic of the notification creation. That should give ideas on customizations involved.
Regards
Sumit

I'm trying to upgrade WordGemH on my IPad with no success using my account because of the security questions which I. Haven't done before.

I'm trying to upgrade WordGem on my IPad with no success using my I tune account. The problem is the tow security questions which I haven't done before.

Hi there Nabila Bakry!
It sounds like you may need to reset your security questions. This can be done by following the instructions in this article:
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Which Reports should be done in BI & which Reports in ECC/ABAP

Hi,
We are implementing SAP ECC & BI in Laggard manner or near simultaneously. Now I as a BI consultant need to suggest which reports should be created in BI & which ones in ECC itself?
I understand that more aggregated, summarised or analytical sorts of reports, also those which need slice & dice & drilldown during navigation should be in BI.
But also apart from these points is there any thumb rules or fundas to decide??
Pl give me ur guidence generously...
Regards,,,

It's look like your client first time using BI system, He might be aware or not aware of ECC.
It's happen mostly that when ECC & BI Immplemention happen simultiounsly, That time Client's as well as Project Management team concentration on ECC not on BW.
1) You check on which Functional Modules reports client is expecting.
2) Then check and install Standard Data flow and reports in your SandBox.
3) Then show thease reports of respective module to your Functional team so they also be understand what is possible in BW or not possible.
4) If your Functional team satisfy with the report's output. Then take training programe for user (Not everybody but few people from Client side). Once they understand how system is working then they will come with their requirement. There your job as Techo-Functional consultant "Can it is possible in BW side with respect to business logic?" there you are have decide.
Regards,
Sushant

Window will not boot on the usb cd rom what should be done

window will not boot on the usb cd rom what should be done

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Windows 10 and the buzzing sounds (and what should be done)

Hi
A week ago i bought myself a HP Pavilion X2 11 inch tablet/laptop and upgraded to Windows 10 (as was advertised).
After the upgrade i get a buzzing sound when i use the Windows 10 apps, Youtube or any integrated program.
After a week of investigation i found out that the driver that is used for the Realtek IDT HD Audio is packaged by HP in 9th of July but the underlying driver from Realtek is from December 2014.
Realtek and Microsoft fixed the issue with the Realtek driver published on 3/2/2015.
Realtek HD Audio fix for Windows 10
So HP will need to repackage it's Realtek HD Audio driver for it's machines to make it fully Windows 10 compliant.
"So HP, is there any update on the way that gives us full Windows 10 compatability?"

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion 11-h100eo x2 PC and Windows 10 updates for your Audio drivers. Here is a link to your Driver page. The update you need it Intel Management Engine Interface (MEI) Driver under the Chipset.
Here is a link to the HP Support Assistant, it was included in your system. You could run that for any updates that might be needed. When the Windows 10 software was install it should have done all the updates that would have been needed. Hope this helps. Thanks.

I reinstalled Firefox and used Xmarks to reinstall bookmarks. All work except for those in the bookmarks toolbar, which scroll down but don't open the page when clicked.

I did a clean install of XP and reinstalled Firefox. Then I used Xmarks to get back all my bookmarks. All are working except for the bookmarks toolbar. It shows entries and scroll as normal but when I click on one the page doesn't open.

I can't install xmarks for firefox

Access permission to the Project server workflow tasks in project server 2013.

Hi All,
I am creating an OOB Project server workflow, where it contains few phases and each phases have some stages, there are few approval levels of the workflow.
Scenario - 1st stage - when project is submitted, a task is assigned to resource, when the resource click on the task link provided in mail, it redirects to the project server workflow task list.
1) When users view the task list, for all user the delete Item and approve button is enabled even we have given permission as edit,view permission in sharepoint group for that user.
2) Task list should be viewable by specific user but in my case even after giving the permission it can be apporved by any one who is not authorised also.
3) then i tried below things
1. deleted the user in pwa
2. deleted the user in sharepoint site.
even after doing the above, the user able to do all activity in the stie content page, have access to the sharepoint portal. how this is possible?
When checked with not existing user permission there are few defalut permission set for that user after AD sync. because of this he as access, even if he is not in pwa or in sharepoint site. how to retrict this?
Can anyone faced the same issue?
How to fix this permission issue?
Thanks in advance.
Sunitha

Hello Treb Gatte,
I ma creating Data Connection from SSRS Report, and then creating Data Set for "Project
Server Workflow Tasks".
And then when I pull data from the database, it is returning empty. For any other sharepoint list this
is working absolutely fine. I am facing issue only wrt "Project Server Workflow Tasks" list.
Thanks,
Shanky

Access Level of the workflow at which customizations should be done

Similar Messages

Maybe you are looking for