Access Manager console url

I am accessing the oam console via its hostname:port/oamconsole and works fine.
This is fine for internal access, but to access it from external network need to provide/publish
a separate url.
Where should one configure this externally published url to access oam console
- on Load Balancer or OHS server?
External network ---- Load Balancer ---- OHS server ------ OAM server
OHS server with mod_wl_ohs pugin would act as reverse proxy for OAM server url?

You could use either method. Note 1327863.1 gives details on using an OHS proxy (it also includes front-ending the OAM managed server urls in this way), and http://docs.oracle.com/cd/E27559_01/install.1112/e27301/webgate10g.htm gives details on how to additionally protect the OHS proxy with a WebGate, if required.
Regards,
Colin

Similar Messages

Remote Access Management Console - configuration issue with Network Location Server

2012 Std R2
The remote Access management console operation status shows all green except for network location server .
Error: There is no response from the network location server URL. DirectAccess connectivity might not work as expected, and DirectAccess clients located inside the corporate network might not be able to reach internal resources.
Resolution listed as:
1. Configure the network location server on a server that is highly available to clients on the internal network.
2. If the network location server is running on the Remote Access server, ensure that IIS is running, and that the URL is available.
The remote access server is located on this server. IIS is running. What URL: show I be looking at?
Any other thoughts so I can get remote access working.
l also am getting a remote access error for IPV6, could this be a cause:
RoutingDomainID- {00000000-0000-0000-0000-000000000000}: Unable to add the interface {D37062B2-A3E0-4496-A459-9E0BBCE5423C} with the Router Manager for the IPV6 protocol. The following error occurred: Cannot complete this function.
John Lenz

Hi John,
please follow the steps to reinstall TCP/IP stack.
1.Restart your PC into Safe Mode with Networking.
2.
Edit your registry. Delete the following keys:
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/Winsock
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/Winsock2
3.
Open the nettcpip.inf file in your %winroot%/inf folder
(%winroot% is usually c:/windows).
Find the [MS_TCPIP.PrimaryInstall] section. Change the Characteristics value from 0xA0 to 0x80.
Open the properties of the network connection you want to fix. In the General tab, click on the Install button. Click on the Have Disk button, and point the location to %winroot%/inf. After that select TCP/IP (not version 6).
4.
Now you would notice that you can uninstall TCP/IP!
Do that, then restart the PC.
Go back to your network connection, and install TCP/IP again as per the above. After another reboot, you should be up and running.
I also noted that the XP network repair tool may yank out the ISA 2004 firewall client stuff. Just run the firewall clinet repair or install it again to fix that problem after you did your reboot. Before you do this kind of crazy stuff.
5.
This along with a TCP/IP reset using the netsh command:
netsh int ip reset resetlog.txt
wish you have a nice thanksgiving too
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Getting error while opening Sun access manager console

We are facing problem while accessing console of Sun Access Manager. We got No Page Found error whenever we try to access the Sun Access Manager console. We have tried restarting the directory server and web server but even that doesn�t help us. Following are the error that gets recorded in log files:-
ERROR: AuthD init() com.iplanet.dpro.session.SessionException: AuthD failed to get auth session
ERROR: Error creating service session java.lang.NullPointerException

The ns-slapd.exe process belongs to the Directory Server. You should therefore check if your DS instance is set up properly.
Michael

Lanuch Remote Access Management Console with a connection to a remote server

I've installed the Remote Access Management Console on my Windows 8 workstation so that I can administer DirectAccess on a Windows Server 2012 server without having to connect to it with Remote Desktop. However, every time I launch the console I have to
click "Manage a remote server" and enter the server name. Is there a way to launch the console with a command-line parameter that opens the remote server automatically?
I've tried running ramgmtui.exe with the name of the server as a parameter, and I've also tried running "ramgmtui.exe /?" but the console doesn't launch at all when called with any of the parameters I've tried.

Hi,
Have you installed Remote Server Administration Tools?
You may use Server Manager to Manage another server. Once you add a server, it will be listed in All Servers. So you will never have to enter the server name.
For detailed information, please view the link below,
Manage Multiple, Remote Servers with Server Manager
http://technet.microsoft.com/en-us/library/hh831456.aspx
Hope this helps.
Steven Lee
TechNet Community Support

Problem accessing management consol

I lost my ability to access my management consol and now can't log into it.
I can still access my StoreCenter px2-300d as a network drive, but when I put in the url 192.168.x.x(internal to my network) my web browser says it cannot find the device. My router still sees the device and gives me the url#. I did a reset. I also downloaded the Lenovo software which supposedly allows me to access it and set it up.
I don't know what happened. Did a file become corrupt?
How do I troubleshoot it?
Thanks in advance for any suggestions.

Hi a2scotty,
There could be many issues causing this to happen. I would recommend backing up your data from the device as soon as possible before proceeding to troubleshoot the device.
Just to clarify, can you access the web management console from the Storage Manager software? Or do you not have access only from the web browser? You may need to update your web browser or try a different browser.
Please reboot the device if you have not done so already.
How long did you hold the reset button for? First try holding the reset for four seconds. If it does not reboot, try 15 seconds. If it still does not respond try 30 seconds or longer until the device reboots.
You could also try connecting the device directly to your computer with an ethernet crossover cable.
Instructions to Direct Connect to NAS:
Unplug the NAS from the router
Unplug the pc from the router (if the pc is wireless, disable wireless)
Using Ethernet Cable, plug the NAS directly into the pc with no other devices attached.
Restart the NAS and wait for it to boot COMPLETELY 100%
The NAS will request an address from the PC which will be an APIPA address (this is a 169. address)
Open up your Start Menu and type in CMD in the search bar and select the CMD program.
Type in "arp -a" in the cmd prompt
The first time you use the arp -a in a cmd prompt, it gives you the 169.x.x.x address of "The PC"
You may have to arp -a twice to get the NAS address.
The second time you use the arp -a I will get another APIPA address in the 169.x.x.x address
Take the new address and use it in the web browser just like normal to access the device.
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

Regarding Access Manager Console Not Coming

Hi
I had installed glass fish application server on one zone.....its working fine.....then i try to install access manager 7.1 on same zone it shows successfully installed in the logs....then i try to open access console through firefox....*it showing the erroor:-http status 500 ....root cause [java.lng .null pointer exception]*
My directory server 6.3 is working fine and it is on some other zone ...
kindly tell me what's going wrong...
Thanks
Sarvar Ahmed

welcome.eis wrote:
I had installed glass fish application server on one zone.....its working fine.....then i try to install access manager 7.1 on same zone it shows successfully installed in the logs....then i try to open access console through firefox....*it showing the erroor:-http status 500 ....root cause [java.lng .null pointer exception]*As this question has nothing to do with Messaging Server I suggest asking this question in the Access Manager forum instead:
http://forums.sun.com/forum.jspa?forumID=760
Regards,
Shane.

Not able to start the Sun Java System Access Manager 7 Console

Hi All,
I have successfully installed the Sun Java System Portal Server 7 on RHEL 4.0.The problem I am facing is not able to start the Sun Java System Access Manager 7 Console while accessing the URL: http://fqdn:8080/amconsole
As soon as I try to access this URL it gives me following Excepiton:::::::
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
com.iplanet.jato.NavigationException: Exception encountered during forward
Root cause = [java.lang.NullPointerException]
     com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:386)
     com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:267)
     com.iplanet.am.console.base.ConsoleServletBase.onUncaughtException(ConsoleServletBase.java:338)
     com.iplanet.jato.ApplicationServletBase.fireUncaughtException(ApplicationServletBase.java:1023)
     com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:469)
     com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:324)
     com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:294)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:747)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
     sun.reflect.GeneratedMethodAccessor106.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
If anyone have any idea about the cause of this error,please let me know.All suggestions are welcome .
Thanx and Regards,
Chirag.

Hi All,
I am having exactly the same problem with the same stack trace. Has anybody have an idea how to fix this?
I have downloaded the Java Identity Management Suite.(java_es-5-identsuite-ga-windows-x86.zip) The first time installation was fine and I was able to bring the Access Manager console. I was able to create users groups etc.
However, when I uninstalled and installed it again, I got exactly the same error described in the thread. Running "amserver start" and "amserver restart" did not help. I did the installation one more time
but again I got the same error.
Thanks for the help.
celikkan

Can not login access manager

mail server version is JES messaging Server 6 2005Q4 :
My Access Manager:http://hostname:8080/amserver
last week, i login access manager, under the web label or configuration label�F
in "ldap" item�Ci add new dc=xx,dc=xx,dc=xx�C
then save configuration.
but after that i can not login access manager.
when i user admin login,it print:"
Authentication failed".
what should i do to restore access manage?
thanks!

javatoall wrote:
Hi,
I login Access Manager, access sample "realm" -> Authentication->
Advance Properties -> User profiles and then I choiced "Dynamic with user Alias".
Then I only configure JDBC authentication with mysql database that I don't used ldapservice.
When I created a one new user in MySQL, I can login into web application that i security as "sample.war" successfull but new user don't right access resource that i protected before.
When i login access manager with amdmin user, I can not find user that i has been created it in MySQL database. t
When the users are created through the dynamic profile, the default cn/sn are set to "default" , after creation you need to login to amconsole as amadmin and change/add proper values for these attributes.
Alternatively you can set the protected resource's policy subject to Authenticated users. This will work but not sure will meet your requirement
>
When i login access manager console with new user, it login successful, and view Profile of new user that I has been created.
Can you tell me How to manage new user that I has been new in MySQL by Access manager console ?
I want to configure access proteced resourse for that user. How to configure that ?
read above use the authenticated users subject
Thank for every help.
VinhND.

How to change LDAP server setting in Access Manager 6.2

Hi,
We have initially set authentication as a SunONE Directory Server 5.1 (master DS1) in Sun Java System Access Manager 6.2. In both /etc/opt/SUNWam/config/serverconfig.xml
/etc/opt/SUNWam/config/AMConfig.properties
conf files, DS1 was set initially. Also on console's Service Configuration ->LDAP->Primary LDAP Server was set as "DS1"
Now the problem is that I am not able to change the DS1 to the other master "DS2". I set DS2 in both above conf files and also the Service Configuration page as Primary LDAP Server. I restarted the server. When I stopped the DS1, I couldn't login access manager console with any user. It looks like it is still trying to get authentication from DS1.
Does anybody know what I am missing here?
Regards,

After hopeless tries, I finally made it work;) The trick was actually updating the sunKeyValue attribute of the entry:
"dn:ou=default,ou=OrganizationConfig,ou=1.0,ou=iPlanetAMAuthLDAPService,ou=ser
vices,dc=company,dc=com" in one of the master DS I have.
Even though I set DS2 and loadBalancer hosts in all conf files and in Primary LDAP conf in amconsole's Service Configuration, it just didn't work until I inserted loadBalancer host in sunKeyValue attribute.
Hope it helps to someone....
-Bora

Sun Java System Access Manager 7.1 config. failed during installation

{color:#0000ff}Hi,
I have installed sun java communication suite 5 on a single host on sun solaris 10.
I have installed required packages and it works fine.
But as per organization need, I have to change domain name.
So i have uninstalled everything and tried to install again with new domain name.
I have made proper entries in hosts file and resolve.conf file.
But duing the first phase of installation only , i failed in configuring access manager 7.1
I have also cerate same scenario in my test environment, but everytime i face the same error.
and sun java access manager 7.1 fails in first stage of installation only.
So would like to know the proper installation procedure while i change the domain name on same hardware...
I have checked both installation logs & summary logs.
But no error, no failed , no severe.
Attached is the summary of installation logs.
Summary Logs :
Installation Summary Report
Install Summary
Sun Java(TM) Communications Suite : Installed
Sun Java(TM) System Web Server 7.0 : Installed, Configured
Java DB : Installed, Configure After Install
Sun Java(TM) System Message Queue 3.7 UR1 : Installed
Sun Java(TM) System Monitoring Console 1.0 : Installed, Configure After Install
Sun Java(TM) System Directory Preparation Tool : Installed
Sun Java(TM) System Directory Server Enterprise Edition 6.0 : Installed, Configured
Sun Java(TM) System Access Manager 7.1 : Installed, Configuration Failed
Sun Java(TM) System Messaging Server 6.3 : Installed, Configure After Install
Sun Java(TM) System Communications Express 6 : Installed, Configure After Install
Communication Services Delegated Administrator : Installed, Configure After Install
Configuration Data
Sun Java(TM) System Web Server 7.0 :
Web Server Instance installation Directory : /var/opt/SUNWwbsvr7
Web Server installation Directory : /opt
Web Server Administration Server Host : RADAGWMSG221.myreliancemail.com
Web Server Admin Server Mode : true
Web Server only CLI installation : false
Sun Java(TM) System Directory Preparation Tool :
Directory Preparation Tool Installation Directory : /opt/SUNWcomds
Sun Java(TM) System Directory Server Enterprise Edition 6.0 :
Directory Server Installation Directory : /opt/SUNWdsee
Sun Java(TM) System Access Manager 7.1 :
Access Manager Installation Directory : /opt
Access Manager Protocol : http
Access Manager Port : 80
LDAP User ID : amldapuser
Administrator User ID : amAdmin
Web Container : WebServer
Access Manager Web Server Host Name : RADAGWMSG221.myreliancemail.com
Access Manager Web Server Instance Directory : /var/opt/SUNWwbsvr7/https-RADAGWMSG221.myreliancemail.com
Access Manager Web Server Port : 80
Access Manager Console Host (for Existing console) : RADAGWMSG221.myreliancemail.com
Access Manager Console Deploy URI : amconsole
Access Manager Password Deploy URI : ampassword
Access Manager Host : RADAGWMSG221.myreliancemail.com
Access Manager Console Port(for Existing console) : 80
Access Manager Services Deploy URI : amserver
Access Manager Cookie Domain List : .myreliancemail.com
Access Manager Common Domain Deploy URI : amcommon
Access Manager Directory Server Host Name : RADAGWMSG221
Access Manager Directory Server Host : RADAGWMSG221.myreliancemail.com
Access Manager Directory Server Port : 389
Access Manager Directory Root Suffix : o=rmail
Access Manager Directory Manager DN : cn=Directory Manager
Organization Marker Object Class : sunISManagedOrganization
User Marker Object Class : inetorgperson
Organization Naming Attribute : o
User Naming Attribute : uid
Sun Java(TM) System Messaging Server 6.3 :
Messaging Server Installation Directory : /opt/SUNWmsgsr
Sun Java(TM) System Communications Express 6 :
Communications Express Installation Directory : /opt/SUNWuwc
Communication Services Delegated Administrator :
Communication Services Delegated Administrator Installation Directory : /opt/SUNWcomm
{color}

Rushi-Reliance wrote:
Kindly let us know how to proceed further as we are waiiting some reply from your team.As I already advised in your previous posting (http://forums.sun.com/thread.jspa?threadID=5359095), you are best off re-installing solaris from scratch and installing Communication Suite 6 update 1 if you cannot get Access Manager 7.1 configured.
Regards
Shane.

Unable to see options in access manager.!!!

Hey Geeks,
I am not sure what changes but I do not see 'users","roles" ,"services" on the access manager console under view dropdown.
has somebody faced this kinda issue.?
I was able to see all the options earlier and I havent changed anything.Although I did try to modify a users profile in the LDAP directory through ldap browser.
When I check "display options" for my organization all options are specified.I have no clue why I am not able to see all option for my org.
any pointers?
Regards

Guys,
I had to re-install the whole Suite to get rid of the problem.Please update me If there is any solution to this.!!!
Thanks in advance!
Deepak.

Access manager installation on solaris zone

Hi
I have installed the Access manager 7.0, Sun java system app server 8.1, Sun sirectory server 5.2 through JES installer on solaris 10 zone AM55-zone. Installer summarry is below, which shows installtion complete without error, but I am not able to launch the amserver login page.
Any suggestion, what I did wrong? any thoughts?
Sid
Installation Complete
Software installation has completed successfully. You can view the installation
summary and log by using the choices below. Summary and log files are available
in /var/sadm/install/logs/.
Your next step is to perform the postinstallation configuration and
verification tasks documented in the Postinstallation Configuration and Startup
Chapter of the Sun Java(TM) Enterprise System Installation Guide. See: http:
//docs.sun.com/doc/819-2328.
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} 1
Installation Summary Report
Install Summary
Java Enterprise System : Installed
Sun Java(TM) System Message Queue 3 2005Q4 Enterprise Edition : Installed
Sun Java(TM) System Application Server Enterprise Edition 8.1 2005Q4 : Installed
Sun Java(TM) System Directory Preparation Tool : Installed
Sun Java(TM) System Directory Server 5 2005Q4 : Installed
Sun Java(TM) System Access Manager 7 2005Q4 : Installed
Configuration Data
Sun Java(TM) System Application Server Enterprise Edition 8.1 2005Q4 :
Domains and Instance Configuration Directory : /var/opt/SUNWappserver
Application Server Installation Directory : /opt/SUNWappserver
Sun Java(TM) System Directory Preparation Tool :
Directory Preparation Tool Installation Directory : /opt/SUNWcomds
Sun Java(TM) System Directory Server 5 2005Q4 :
Directory Server Admin User : admin
Directory Server Manager : cn=Directory Manager
Directory Server Identifier : AM55-zone
Directory Server Port : 389
Directory Server Root Suffix : dc=ipsolutionshowcase,dc=com
<--[33%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Directory Server Administration Domain : ipsolutionshowcase.com
System User : root
System Group : root
Existing Configuration Directory : 0
Configuration Directory Host : AM55-zone.ipsolutionshowcase.com
Configuration Directory Port : 389
Configuration Directory Admin User : admin
Existing User Directory : 0
User Directory Host : AM55-zone.ipsolutionshowcase.com
User Directory Port : 389
User Directory Admin User : admin
User Directory Suffix : dc=ipsolutionshowcase,dc=com
Disable Schema Checking : 0
Add Sample Entries : 0
Populate Database : 1
Sun Java(TM) System Access Manager 7 2005Q4 :
Access Manager Installation Directory : /opt
Access Manager Protocol : http
Access Manager Port : 8080
LDAP User ID : amldapuser
<--[66%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Administrator User ID : amAdmin
Web Container : AppServer
Access Manager Application Server Installation Directory :
/opt/SUNWappserver/appserver
Document Root : /var/opt/SUNWappserver/domains/domain1/docroot
Access Manager Console Host (for Existing console) : AM55-zone.
ipsolutionshowcase.com
Access Manager Console Deploy URI : amconsole
Access Manager Password Deploy URI : ampassword
Access Manager Host : AM55-zone.ipsolutionshowcase.com
Access Manager Services Deploy URI : amserver
Access Manager Cookie Domain List : .ipsolutionshowcase.com
Access Manager Common Domain Deploy URI : amcommon
Access Manager Directory Server Host Name : AM55-zone
Access Manager Directory Server Host : AM55-zone.ipsolutionshowcase.com
Access Manager Directory Server Port : 389
Access Manager Directory Root Suffix : dc=ipsolutionshowcase,dc=com
Access Manager Directory Manager DN : cn=Directory Manager
Organization Marker Object Class : sunISManagedOrganization
User Marker Object Class : inetorgperson
Organization Naming Attribute : o
User Naming Attribute : uid
<--[100%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} !
You have new mail in /var/mail/root
bash-3.00#
bash-3.00# cd /var/opt/mps/serverroot/slapd-AM55-zone
bash-3.00# ./start-slapd

Thanks samk,
After the installation, I have started the Directory server,admin,and console with following commands:
bash-3.00# directoryserver start
bash-3.00# directoryserver start-admin
SunONE-WebServer-Enterprise/6.0SP3 B05/19/2004 02:48
warning: daemon is running as super-user
[LS ls1] http://AM55-zone.ipsolutionshowcase.com <http://AM55-zone.ipsolutionshowcase.com> , port 390 ready to accept requests
startup: server started successfully
bash-3.00# directoryserver startconsole
Recieved the Login console window,logged in and got the ipsolutionshowcase tree.
What are the next steps I need to folow in order to launch the Access Manager page?
Ant thoughts?
Thanks for ye help
Sid

DS Management console for 4x

Hi BODS Group
I am unable to find DS Management console in SAP BODS 4.x tools find the attached snapshot
can any one provide DS Management URL
Regards
Ganga

Hi Ganga
use can you the following for DS Management console URL Syntax
http://<server name >:<port number >/DataServices/launch/logon.do
I think the above information answers your query
Regards
Srinivas

Access Management

Hi All,
I am new one to the access management and also i saw some of the GLP's regarding the Access Management.But i not able to find the Access management console.Is there is any installation is needed for that or any cloud instance is available..I saw the access management console some of the screen shot in webpages.So please refer me how to get the access management console.And also refer any blogs for my practice.
Thanks & Regards,
Ove

Hi,
Cloud instance of OAM (Access Manager) is not available, for development purpose you can download the software's from below location:
http://www.oracle.com/technetwork/middleware/id-mgmt/downloads/oid-11gr2-2104316.html
You can register for free Oracle account and download the softwares.
After download, you need to perform following activities:
Create OAM Schema using RCU
Install IAM Package.
Configure Weblogic domain for OAM.
Configure Security Store.
Start Admin and OAM Servers
OAM 11gR2 (Oracle Access Manager 11.1.2.0.0) Installation | IDMORACLE
Or http://oracleiam.com/oam-oaam-11gr2-installation-configuration/
HTH,
~J

Disabling JavaScript on Access Manager

Hi,
We are testing the liberty samples that come with the access manager using an LECP-enabled client. During the single sign on process, the service provider redirects to the identity provider but after typing the login information on identity provider, the access manager responds with a few redirects and finally sends content that contains javascript. The client browser in our case does not support javascript. We tried disabling javascript for our client on the "Browser UA" screen on the "Edit Client Types" page in the Client Detection Service on Access Manager console but it does not seem to have any effect. Is there any other way to disable Access Manager from sending javascript ?
Please help.
Thanks in advance.
Regards,
Aditya

does your client support meta-refresh tags? AM often uses javascript to redirect the user. You would have to go in and modify/create new template files for your client to work around it.

Access Manager console url

Similar Messages

Maybe you are looking for