Access mode - deselect "shared" to "exclusive"

I do not konw how to de select a project from "shared" to exlusive" user.
This Happen only in e project and in the same project I'm not able to deleted it.
Please be aware that I'm setting as administrator
regards

If the project is mistakenly stuck in exclusive mode you may need to delete the row for it in the PROJSHAR table.

Similar Messages

I can't access my Home Sharing libraries

I have tried so many times to find the shared libraries, and looked at all the advice so far. I have a windows, with the newest iTunes, 10.5, and am trying to connect my new mac to it, same iTunes 10.5. The boxes are ticked, the network is fine, there is no blocking firewall, both computers are authorised. I have also re-installed and re-started my computers numerous times. My old windows computer has connected to other computers before. After I sign in to home sharing and click done, it disappears. Where you go to tick the boxes, under preferences/sharing, it says "On, no users connected". its the same on both machines but they are on the same account. How come? and how can I get to share my libraries across computers? If i cant then i bought this very expensive new laptop for nothing.

Let me explain the two different ways of sharing media libraries in iTunes and hopefully that may shed some light on how things work for you and others and lead to a solution to your problem. This will also allow me to correct something in my previous post.
I use Home Sharing exclusively and don't always remember about Library Sharing but iTunes also has another sharing feature called Library Sharing that is a little different and slightly more restrictive.
Home Sharing is enabled by selecting Home Sharing from the 'Advanced' menu (see screen shot below) and entering your Apple ID and password. Home Sharing allows unrestricted access to the shared iTunes library from computers on the network as well as from iOS devices. Home Sharing is required for access by iOS devices, they do not work with Library Sharing. Home sharing also allows you to copy media from one computer to another, something you can't do with Library Sharing. Home Sharing overrides Library Sharing if both are enabled.
Library Sharing is enable by selecting 'Share my library on my local network' in iTunes Preference (see screen shot below.) Library Sharing does not work with iOS devices. Library Sharing only allows for the playback of media from shared libraries. You cannot copy media from one computer to another using Library Sharing. The 'Status:' indicator will display a count of the number of computers that are connected to your library using Library Sharing. Home Sharing connections will not be indicated here. You can also restrict who can connect to your library using a password. This password restriction has no affect on Home Sharing connections. They are authorized and controlled by the use of Apple IDs.
How to tell if you are connecting to a library shared by Home Sharing or Library Sharing (see screen shot below.) A Home Sharing library icon looks like a house with a musical note on the side. A Library Sharing icon looks like a stack of CDs with a musical note on top. They are both labeled by the name of the shared library as configured in iTunes Preferences.
I think I've covered everything and hope this helps people understand the difference between the two types of shared libraries and how to configure each.

What is the difference between Bridge Mode and sharing a public ip address?

Hello,
I would like to understand this difference, in general terms, and also in the context of my setup:
I have an office inside a business center where we are assigned a fixed ip address per computer, and I don't know whether it is better to use bridge mode or to share a public ip address in order to use the benefits of the new time capsule: internet access, hard drive sharing, mobile me back to my mac? Back to my mac does not seem to be working and I get the message that I net a modem with NAT protocol bla bla bla...but I'm also not sure whether the problem is with the setup as the manufacturer claims the protocol is supported.
Thank you for the help

"...share a public ip address..." enables the DHCP/NAT service on the Time Capsule.
"...bridge mode..." disables the DHCP/NAT service on the Time Capsule.

Maintain access to network(shared folders) resources if the site loses access to a Domain Controller?

Scenario
Windows 7 users log on to workstations at a site. Domain Controller is up and does the domain authentication for those users across the WAN. Users are then accessing a local(same building) Shared directory on a Windows 2008r2 server, in order to open, modify,
save new files, etc.
Then, the site loses access to the Domain Controller due to a WAN outage.
Question
Will those users that have already logged onto their Windows 7 workstations continue to have access to the shared resources on the local Windows 2008r2 server with their cached credentials(assuming they don't logoff or restart their machines)?? This has
been the case in the past, but wondering if anything has changed with Windows 2008??
Thanks

Hi,
The duration that you can access the server depends on when the server requires re-authentication.
In Windows implementation, SMB session expiration is enforced based upon the client’s support of dynamic re-authentication capability [MS-SMB].
If the client enables the CAP_DYNAMIC_REAUTH capability bit, the server will enforce session expiration. If a client does not set CAP_DYNAMIC_REAUTH, the Windows server does not return STATUS_NETWORK_SESSION_EXPIRED.
The SMB dynamic re-authentication feature was introduced in Windows XP. From there, Windows-based clients set the CAP_DYNAMIC_REAUTH capability bit to indicate to the server that the client supports re-authentication when the Kerberos service ticket for
the session expires.
Windows servers do check CAP_DYNAMIC_REAUTH:
If clientCapabilities sets CAP_DYNAMIC_REAUTH, the server will set Server. Session.AuthenticationExpirationTime to the expiry time returned by AcceptSecuirtyContext.
If clientCapabilities does not set CAP_DYNAMIC_REAUTH, the server will not set Server. Session.AuthenticationExpirationTime, basically a CAP_DYNAMIC_REAUTH capability bit not set by the client means the session will not expire on the server side.
To configure Maximum lifetime for service ticket, you can use grouppolicy. The default value of
Maximum lifetime for service ticket
in Default Domain Policy is 600 minutes.
Note:This setting is applied to DC, not clients.
For detailed information, please view the link below
CIFS and SMB Timeouts in Windows
http://blogs.msdn.com/b/openspecification/archive/2013/03/19/cifs-and-smb-timeouts-in-windows.aspx
Maximum lifetime for service ticket
http://technet.microsoft.com/en-us/library/jj852188.aspx
Hope this helps.
Steven Lee
TechNet Community Support

HT1473 My girlfriend and I both have iTunes account with our own music libraries and we want to combine our two libraries into one icloude accounts so can both then access our one shared libary at anytime in the cloud. How do we do this?

My girlfriend and I both have iTunes account with our own music libraries and we want to combine our two libraries into one icloude accounts so can both then access our one shared libary at anytime in the cloud. How do we do this?

No it is not possible. Content purchased from the iTunes Store is permanently tied to the account from which it was originally purchased, and Apple does not provide a way to change it.

How to create a calendar activity in accessibility mode ?

I didn't find any way to create a calendar activity in accessibility mode. Since it shows blank list of days in calendar component for a month.
It seems to be a bug in ADF calendar component. Please suggest if there is any alternate way to support this.
Thank you so much.

Timo,
From a reference doc of previous version of jdev/adf, it said :
http://www.oracle.com/technetwork/cn/java/calendar-091799.html
Expand the Data Controls accordion and drag the collection that represents the view object for the activity created above (FodCalEventVO) and drop it as a Calendar.
But in Jdev 12c.--cannot find the Create Calendar choice.
In jdev 12c can drag and drop a calendar component from the component palette, but do not now how to bind it to view objects.
Thanks.
BAO

Using TImed Access mode on Airport Extreme with other routers in bridge mode. Not working as expected.

I am trying to setup timed access mode on my airport extreme in order to limit the times devices can connect to my network, but I am having some trouble.
My setup is as follows Cable Modem ---> Airport Extreme ---> Netgear router
The Airport is running DHCP and the Netgear is in bridge mode. The only purpose of the Netgear is to provide a wireless access point for older b/g wifi devices. The Netgear is connected to the Airport by an ethernet cable from one of its LAN ports. All ip addresses are supplied by the Airport.
When I list a device mac number in the Airport extreme's timed access table it does seem to block the device if the device trys to connect to the airport's wireless service, but the device is still able to obtain service through the Netgear wireless service. I want the device to be blocked on both wireless networks. I thought this would work since all DHCP is on the airport. Why is the Airport allowing the device to connect when it comes in through the Netgear?
In this example the device I am trying to block is 5c:59:48:ba:28:d2.
Looking at the log on the airport I see the following entry when the device (when permitted) connects to the airport wireless
Nov 30 22:43:12
Severity:5
Associated with station 5c:59:48:ba:28:d2
If instead the device connects to the Netgear wireless I see the following log entry on the airport (this connection gets through even if the mac address above is listed as blocked on the airport)
Dec 01 10:46:29
Severity:5
Connection accepted from [fe80::223:12ff:fe29:acfe%bridge0]:54774.
It appears that the Netgear router (while bridging the network) is somehow modifying the mac address format in a way that the airport does not recognise it as the device to block.
What can I do to fix this?
Thanks.

The Netgear wireless server has control over what what devices are allowed to connect.
Unless you tell the Netgear what devices you want to allow to connect, it will allow any wireless device to connect as long as it knows the wireless network password.
IF.... .you were using two AirPort Extremes, and not a Netgear, the two Extremes would communicate to each other....so you would only have to enter Timed Access settings on one router and other AirPort would automatically pick those settings up.
But, even this was not the case until the last year or so when Apple updated firmware. A few years ago, you might have had 2 Apple AirPort Extremes on the network, but you still had to manually set up Timed Access on both devices separately.
Bottom line, you need to setup the equivalent of Timed Access on the Netgear router.

How to change Access Mode of HANA Stored procedure

Hi,
When you are creating a stored procedure as design time object, one of the option is access mode (either read only or read/write).
I understand read only is default setting in HANA DB, and unless you explicitly change the setting you cannot read/write using stored procedure.
My question is, is there way to change this setting, so I have option to choose either read or read/write when I create a stored proc?
Thank you.
Hyun

Hi Hyun,
Please have a look on this thread:
Create local temporary table in procedure
You have to enable sqlscript_mode to UNSECURE as mentioned by lars.
Then depending on whether you are specifiying "READS SQL DATA" it will act as a READ procedure else as a WRITE procedure.
Regards,
Krishna Tangudu

I have an external hard drive with a shared music folder, which I can access (from Home Sharing) and play music on my Windows computer. On my new Mac, I can see the drive in Home Sharing but not play any music. What's the solution?

I have an external network hard drive with a shared music folder (WD MyBookLive), which I can access from Home Sharing and play music on my Windows computers. On my new Mac, I can see the drive and the music in Home Sharing but the tracks will not play. All the other authorized computers in my home network show up in Home Sharing and I can play the content. What's the solution?

Troubleshooting Home Sharing - http://support.apple.com/kb/TS2972

My external hard drive goes in to constant access mode and really slows down my computer

I'm using an external hard drive for time machine. After working for an hour or so the drive goes into a constant access mode and realy slows down my IMac. I look at activity monitor and everything looks good, no high CPU usage or memory issues. The only fix is to use the power button to shut down my IMac. After restart it works fine for a while.
If I turn off time machine the problem seems to not happen. I tried disk utility on the external hard drive and it says the dirve is fine. I change out external drives and the problem still occures. Any thoughts?

I didn't realize my profile stated otherwise.
Please check near the bottom of your original post above to see OS X (10.7.2). You might want to update that to avoid confusion and save some time in the future.
OK, please take a deep breath.
Apple does not officially support Time Machine backups to a drive at the USB port of the AirPort Extreme....likely because it is not reliable. You might want to review this Apple Support document to confirm:
http://support.apple.com/kb/HT2038
So, we are not going to be able to provide you with much assistance on that issue.
Some users seem to be able to make this work....some have some problems....and some (like me) who have tried this have nothing but problems.
Sorry, I can't help on this one, but maybe another user who has had better luck will post to provide his secrets.
The iTunes and iPhoto libraries and files are my only copies now. I moved everything from my Macbook to the external then deleted the originals.
Not sure if you have thought about this.
If you deleted the "originals", then your only copy of your data is on one hard drive. You have no backups if the drive has a problem.
A minimum backup plan would be to have a copy of important data on two different drives. When....not if...one drive fails, you have the data on the "other" drive.
You have no "other" drive according to the information that you have provided.
Further.....Time Machine backs up the changes on your Mac. At some point....you cannot know when.....Time Machine will pick up the change on your Mac and delete the iTunes and iPhoto data from your Time Machine backups.
The files might stay there a few months, or even longer. But, I have seen instances where the files were deleted within a week or two.
So my advice would be to only delete data from your Mac that you can afford to lose.

Accessibility-mode set to inaccessible and 508 compliance

Hi,
I'm using JDEV 10.1.3.3.0.
I've set accessibility-mode to inaccessible in adf-faces-config.xml in order to set the InitialFocusID on some of my pages. Does this setting mean that my application is not/cannot be 508 compliant?
Is there a way to use the InitialFocusID (or other way to position the cursor) and use ADF Faces automatic 508 compliance code?
TIA,
Dave

Hi,
ensure you use the correct version of JAWS. In the past I've seen things like this caused by the JAWS reader. If the problem still shows and you have a support contract, provide a test case and file a bug
My problem is when i use tab key from keyboard to navigate on the page the component highlights(dotted line around the component ) but it does not open the required popup.
This is because there is no setting in your page code that says that the popup should show when the component is in focus.
+<af:showPopupBehaviour popupId="alertPopup" triggerType="mouseOver" align="startbefore"/>+
+<af:showPopupBehaviour popupId="alertPopup" triggerType="contextMenu" align="startbefore"/>+
Frank

Accessibility mode FAIL

I want to love BB 10 OS & my Z10. I am proud to put my phone on the table with all the iPhone fanboys and let them know they are slavish drones! But I stumbled into a major design flaw today and I want to nuke my Z10!
Maybe I'm just nervous, but I must have pressed the Lock button 3 times. Like Dorothy in the Wizard of Oz clicking her heals. The next thing I know the phone is talking to me. Thus ensues 2 hrs of maximum frustration There is ABSOLUTELY NO SCREEN SUPPORT that tells me I'm in Accessibilty mode. A simple message: "Press Lock 3 Times to Exit Accissibility Mode" would have helped immensely.
The operation of the phone becomes100% inscrutible. I later learn that this mode is for the visually impaired. I would like to know what testing was done with people who needed this 'feature?' Close your eyes and tell me it helps! It only stumbles, stammers, fails to respond! I later learned with a call to the ever-helpful T-Mobile support people that a three finger swipe at precise angles, velocity and incredible accuracy has a PRAYER or reversing this mode. OMG! I was going to drive to a T-Mobile store or the hospital emergency room after the hara-kiri I was sure would be more humane than this devil spawn of a BETA FEATURE!!
PLEASE: make the triple lock press a DEFAULT OFF function for accessibility. If you are visually impared it would be a purposeful selection that would require assistance anyway. DON'T MAKE IT THE DEFAULT! And for heaven's sake make disabling/reversing it obvious. Who could possibly imagine that three finger swipes or triple clicks (seriously??) would be natural UI features?
I want to love BB, but this really crashes my party
Kim
Indianapolis

Pressing the power button three times enables Screen Reader Beta in Accessibility Mode, you must have also confirmed Confirmation Message (default On) to accidentally have gone into that mode.

Is there api function to change access mode and set a passcode to recording in meeting?

Is there api function to change access mode and set a passcode to recording in meeting?
When I'm trying to use "action=acl-field-update&acl-id=SCO_ID_RECORDING&field-id=meeting-passcode&value=MY_PASSC ODE" it just clean the password and do not set it or change.
And "action=permissions-update&acl-id=SCO_ID_RECORDING&principal-id=public-access&permission- id=view-hidden" do not work too.

There is not a specific API for doing this. This was discussed in the other Connect forum here, Adobe Connect User Community.
For you call I would make the second part differently. Instead of 'field-id=meeting-passcode&value=MY_PASSCODE' I would call 'meeting-passcode=MY_PASSCODE' and see if that worked better.

App that can access windows file sharing

Hello... I've got my Nokia 500 today, but i'm looking for an app that can access windows file sharing via wifi. I want to transfer my picture from cellphone to my computer via wifi..
Nokia 500 -> Wifi -> Computer (Windows File Sharing)...
Anyone please create an app for me

Telexy SymSMB used to be such an app, but was taken off the market (Nokia demanded it, because apparently some Nokia employees were involved in developing the app). Don't know if anything similar has come out since then.

How can i access my home shared videos from my iPad2 if I now have iTunes match?

how can i access my home shared videos from my iPad2 if I now have iTunes match?

That's exactly what I meant, but for some reason Home Sharing stopped working on my iPad2 once I activated iTunes Match.
Since then, I waited for iTunes Match to finish setting up and scanning my iTunes library on my MacBook Pro and I restarted my iPad2. Both Home Sharing and iTunes Match are now up and running smoothly!
Thanks for the reply!

Access mode - deselect "shared" to "exclusive"

Similar Messages

Maybe you are looking for