ACCESS MY DATA REMOTELY

Ok Guys,
So far, so good with Oracle 10G XE. Now how do I access a database deployed on my desktop from my laptop or other machines connected to the same network? I am sorry if my question looks too simple; I am very green in these matters.

Per default only local access (from the same machine) is allowed via http.
You can change that either via the GUI (log in as SYSTEM):
Home>Administration>Manage HTTP Access
OR
connect as SYSTEM via sqlplus and run:
SQL>exec dbms_xdb.setListenerLocalAccess(false);###
It is documented at
http://download-west.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm#BABIJBHJ
Or are you talking about a sqlnet connection via sqlplus / Toad / Sql developer / JDBC?
~Dietmar.

Similar Messages

How can I notify staff of updated data if they do not have access to the remote data?

We have a shortcoming on one of our major programs that will not be fixed for at least one year. I want to create a notice for staff when there are pending requests for local offices. I am using a remote view to check if there are new requests from
local offices:
SELECT xxx_yyyyy_request_queue.COMMENTS;
FROM xxx_yyyyy_REQUEST_QUEUE xxx_yyyyy_request_queue;
WHERE xxx_yyyyy_request_queue.MODIFIED_BY IS NULL
I use the remote view as the data source for a table and have a small window that stays on top that I can see if there is an order. I trigger the remote view using a timer event.
This is fine as a stop-gap. However, I cannot run this on the machines of the staff that need the notice: they do not have the correct version of Oracle, they do not have access to that remote data, we do not want multiple machines triggering the same query
every 15 seconds, etc.
Is there a way that I can notify other users of the change in the data fro the remote view. My original thought was to update a local table with the view reults and have a companion routine notify them of changes to that table. However, I do not see how
the SQL used by VFP accomodates the "INTO" clause.
Your help is appreciated.

data.
At least your query seems to get data where MODIFIED_BY IS NULL, doesn't it?
So if the reccount is>0 there is a reason to inform your employees.
Bye, Olaf.
Olaf Doschke - TMN Systemberatung GmbH
http://www.tmn-systemberatung.de

How can we access R/3 data remotely from SAP APO system?

Hi Experts...!
I want to access R/3 data (i.e, some ZTABLE data) remotely from SAP APO system. Can any one give some solution regarding this ?
Regards
Rayudu

Hi,
Please try this FM RFC_READ_TABLE.
Regards,
Ferry Lianto

Can I access the data backed up on my time capsule remotely via the Internet?

Can I access the data backed up on my time capsule remotely via the Internet? Let us say I have all my music or photos on my time capsule at home and I want to access it while I am outside over the Internet can I do this?

See remote access methods here.
https://discussions.apple.com/community/wireless/airport?view=documents
I am not sure what format these files are in.. but if they are itunes or iphoto.. have a care.. it is easy to corrupt them.

Problem while accessing object in remote database

Hi All,
We have a procedure "UPDATE_CONV_DETAILS" created in the remote databse in the "apps" schema. The synonym for the procedure is created in the billing schema(present in the remote database). A dblink is created the local database through which we are tring to access the remote object "UPDATE_CONV_DETAILS".
Dblink script:
create public database link PRE_TO_CEL
connect to BILLING
identified by BILLING
using 'MAP1';
When trying to access the object from the local machine using the schema name.object_name it works fine:
SQL> DESC APPS.UPDATE_CONV_DETAILS@PRE_TO_CEL
PROCEDURE APPS.UPDATE_CONV_DETAILS@PRE_TO_CEL
Argument Name Type In/Out Default?
IN_MOBILE VARCHAR2 IN
IN_SERVICE_CODE VARCHAR2 IN
IN_STATUS VARCHAR2 IN
OUT_ERROR_CODE NUMBER OUT
But when trying the access the same object using the synonym_name it gives the error:
SQL> DESC UPDATE_CONV_DETAILS@PRE_TO_CEL
ERROR:
ORA-04043: object APPS.UPDATE_CONV_DETAILS does not exist
Regards,
Kirti

You have two schema.
apps
billing
both reside in remote database.
there on procedure and on procedure u create one synonym and u want to access it.
ur remote database name is "map1"
on ur local database ur create one dblink to access remote database.
ORA-04043: object string does not exist
Cause: An object name was specified that was not recognized by the system. There are several possible causes:
- An invalid name for a table, view, sequence, procedure, function, package, or package body was entered. Since the system could not recognize the invalid name, it responded with the message that the named object does not exist.
- An attempt was made to rename an index or a cluster, or some other object that cannot be renamed.
Action: Check the spelling of the named object and rerun the code. (Valid names of tables, views, functions, etc. can be listed by querying the data dictionary.)

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Access MS Access database on remote computer (shared folder)

Hello,
I need some help.
I've made a program and it works fine on my computer, but multiple users will be using program simultaneously, each one on his own computer conected over local network to mine computer (database is on my computer in shared folder).
When I try to access data on database (path is path of shared folder) i'm getting error 5013 (no database). The problem occurs only when I'm trying to read something from MS access database but not if I try to read data from .txt file, then it works fine...
I'm using ADO Tools
Can someone help me, I would be very greatful?
Solved!
Go to Solution.

Thanks to you Dennis I've managed to figure it out.
I'll explain this for future generations
1) I've created DSN. To do that open ODBC Data Source Administrator:
- for 64 bit app C:\Windows\System32\odbcad32.exe
- for 32 bit app C:\Windows\SysWOW64\odbcad32.exe
In System DSN tab click Add.. then choose Microsoft Access Driver (*.mdb) (If you do not have this on list download that drivers from web) --> FINISH.
Enter Data Source Name (mine is Test2) --> Select... --> now because the MS Access database is on shared folder on remote PC go to Network... --> Browse... and select that shared folder --> Finish. Now you'll see all .mdb files on that folder and you choose your database --> OK --> OK --> OK
2) Now in block diagram you connect string "DSN=your_dsn_name;" (mine was Test2) to ConnectionString connector of ADO Connection Open.vi
It worked for me.
Pis
Attachments:
MS Access database on remote computer (local network).jpg ‏114 KB

How do I resolve this error in Safari Your page is blocked due to a security policy that prohibits access to Category Remote Proxies"?

I'm trying to access several pages and keep geting "Your page is blocked due to a security policy that prohibits access to Category Remote Proxies" After going over all my security stuff I just can't find where I would correct the error.
Is there anyone who could help me?
Thanks
Fr. Gary

very strange,
1. check time and date on your computer
2. reset network configuration, make sure there are no proxy servers and you get DNS from your router not manual
3. Reset certificates database
Go to Terminal (Applications>Utilities)
sudo rm /var/db/crls/*cache.db
(you will be prompted for your password)
and reboot the computer
post back

Set up remote users in Win 2012 R2 remote server so employees can access their desktop remotely

Hi we want to get rid of PC/desktops in house. We are a 10 employee firm. We want all of them access the server remotely from their own laptop etc., They mostly use MS Office and adobe reader etc., very light work. How can
we set up a virtual desktop for each of the users in the Server. I heard about Remote Desktop Services but not sure how this would work.
we are planning to get a one managed dedicated server from some hosting provider with decent config (say Xeon Server with 8 GB or more RAM with SATA or SAS drives. If you have any suggestions please feel free to comment on whom to buy. Azure wouldn't
work as we cannot install MS Office App on the remote desktop services VM!).
Do I need a separate server for AD?
Does Win SRV 2012 have option to create remote desktop for users that can log in remotely?. I understand we need RDS CAL no problem,
How can we allow users to store data - what's a best option.. We can attach a SAS/SATA drive that users can map to is one idea.
We plan on getting Office 365 E3 plan that comes with Office Pro Plus. We understand that we need volume license for office to be installed on remote server. We will be migrating email and sharepoint to O365.
Appreciate if some one could advise how this would work. Also from backup point of view, what options that we need to consider.
thank you

Hi,
If all the users only need to use same applications, you can make the server as the Remote Desktop Session host server (RDSH), install the RD licensing role and install proper
RDS CALs.
If it is a Windows Server 2012, you can refer to
Deploying the RDS Quick Start deployment type in Windows Server 2012 (for Session Virtualization)
http://social.technet.microsoft.com/wiki/contents/articles/10421.deploying-the-rds-quick-start-deployment-type-in-windows-server-2012-for-session-virtualization.aspx
AD is not the requirement for you.
In addition, if you also would like to access the server from Internet, you may need to do one of the following:
1. Purchase a static public IP address and connect the server to the Internet directly.
2. Purchase a domain name and bind the IP address of the server to it.
3. If the server do not connect to Internet directly, you need to configure port forwarding on your router to forward TCP/DUP 3389.
4. Setup the VPN or RD gateway server.
Allow Remote Desktop connections from outside your home network
http://windows.microsoft.com/en-us/windows7/allow-remote-desktop-connections-from-outside-your-home-network
More information:
Remote Desktop Services Overview
http://technet.microsoft.com/en-us/library/hh831447.aspx
Installing Remote Desktop Session Host Step-by-Step Guide
http://technet.microsoft.com/en-us/library/dd883275(v=ws.10).aspx
Remote Desktop Services: Getting Started
http://technet.microsoft.com/en-us/library/dd736539(v=ws.10).aspx
Deploying Remote Desktop Licensing Step-by-Step Guide
http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
Hope this helps.
Jeremy Wu
TechNet Community Support

VPN connects but unable to access resources on remote network

HI,
I'm able to ping the ASA interface once the VPN is connected but unable to access any of the resources located on the remote network such as shares and computers. The cisco vpn client shows data being sent and recieved when I ping the interface on the ASA but it doesn't recieve any data when I attempt to ping or access other resources on the network.
ASA Version 8.2(5)
hostname HOST_NAME
domain-name default.domain.invalid
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
speed 10
duplex half
interface Ethernet0/4
speed 100
duplex full
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.10.8.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 12.x.x.x x.x.x.x
boot system disk0:/asa825-k8.bin
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
dns server-group DefaultDNS
name-server 10.10.8.2
domain-name default.domain.invalid
same-security-traffic permit intra-interface
object-group service Vipre tcp
port-object range 18082 18082
port-object range 18086 18086
object-group network town
network-object 192.168.0.0 255.255.0.0
access-list outside_20_cryptomap extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list new extended permit ip host 192.168.0.1 any
access-list new extended permit ip any host 192.168.0.1
access-list outside_20_cryptomap_1 extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list townoffice_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list townremote_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list outside_access_in extended permit tcp any interface outside object-group Vipre
access-list outside_access_in extended permit tcp any object-group Vipre interface inside object-group Vipre
access-list outside_access_in extended permit tcp any eq 3389 10.10.8.0 255.255.255.0 eq 3389
access-list test extended permit ip host 192.168.0.6 host 10.10.8.155
access-list test extended permit ip host 10.10.8.155 host 192.168.0.6
access-list test extended permit ip host 10.10.8.2 host 192.168.3.116
access-list test extended permit ip host 192.168.3.116 host 10.10.8.2
access-list test extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit tcp 192.168.0.0 255.255.0.0 10.10.8.0 255.255.255.0
access-list bypass extended permit tcp 10.10.8.0 255.255.255.0 192.168.0.0 255.255.0.0
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpn 10.10.8.125-10.10.8.149 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-522.bin
no asdm history enable
arp timeout 14400
global (inside) 1 interface
global (outside) 1 interface
nat (inside) 1 192.168.0.0 255.255.0.0
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface 18082 10.10.8.2 18082 netmask 255.255.255.255
static (inside,outside) tcp interface 18086 10.10.8.2 18086 netmask 255.255.255.255
static (inside,outside) tcp interface 3389 10.10.8.2 3389 netmask 255.255.255.255
static (inside,inside) 192.168.0.0 192.168.0.0 netmask 255.255.0.0
static (inside,inside) 10.10.8.0 10.10.8.0 netmask 255.255.255.0
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 12.70.119.65 1
route inside 192.168.0.0 255.255.0.0 10.10.8.250 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http outside
http outside
http inside
http outside
http inside
http outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt noproxyarp inside
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set pfs
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 60 set pfs
crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 80 set pfs
crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 100 set pfs
crypto dynamic-map outside_dyn_map 100 set transform-set ESP-3DES-SHA
crypto map outside_map 20 match address outside_20_cryptomap_1
crypto map outside_map 20 set pfs
crypto map outside_map 20 set peer 69.87.150.118
crypto map outside_map 20 set transform-set ESP-3DES-SHA ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 30
telnet 10.10.8.0 255.255.255.0 inside
telnet timeout 5
ssh 63.161.207.0 255.255.255.0 outside
ssh timeout 5
console timeout 0
dhcpd dns 10.8.8.2
dhcpd address 10.10.8.150-10.10.8.200 inside
dhcpd dns 10.10.8.2 interface inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy aaa internal
group-policy aaa attributes
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
default-domain value domainname
group-policy bbb internal
group-policy bbb attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec l2tp-ipsec
split-tunnel-policy tunnelall
split-tunnel-network-list value townoffice_splitTunnelAcl
default-domain value domainname.local
group-policy townremote internal
group-policy townremote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value domainanme
group-policy remote internal
group-policy remote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value dksecurity.local
address-pools value vpn
username xxxx password . encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxxx password . encrypted privilege 15
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx password encrypted privilege 15
username xxxx attributes
vpn-group-policy remote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxxx password encrypted privilege 15
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
tunnel-group 69.87.150.118 type ipsec-l2l
tunnel-group 69.87.150.118 ipsec-attributes
pre-shared-key *****
tunnel-group remote type remote-access
tunnel-group remote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group townremote ipsec-attributes
pre-shared-key *****
isakmp keepalive disable
tunnel-group townremote type remote-access
tunnel-group townremote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group lansingremote ipsec-attributes
pre-shared-key *****
class-map tcp-bypass
match access-list bypass
class-map test
match access-list new
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
no dns-guard
no protocol-enforcement
no nat-rewrite
policy-map global_policy
class test
class inspection_default
policy-map tcp
class tcp-bypass
set connection random-sequence-number disable
set connection advanced-options tcp-state-bypass
service-policy global_policy global
service-policy tcp interface inside
prompt hostname context
call-home reporting anonymous prompt 2
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:c724d6744097760d94a7dcc79c39568a
: end

You need to change the VPN pool ip subnet to something other than the same ip range used on the inside interface.
Sent from Cisco Technical Support iPad App

Access image data

Iam doing a project on remote desktop viewing.For this I need to access image data stored in the video memory.If anyone has any information regarding this please mail us.
[email protected]

Thanks,I went through the mentioned websites.Now I am able to acceess the image data.
I have already set up a client server connection, I am giving the client side image data in the form of an input file to the server.The problem is first we have to run the client and then the server.And also on server side it is displaying the previous client desktop not the current one.
If anybody has relevent information or code please mail .
[email protected]

Xcelsius SWF with QaaWS through SSL: Cannot access external data

I am getting the following error while loading Xcelsius Dashboard in https mode.
Error: Error #2170, Cannot Access External Data
Connection Type: Query as a Web Service
To access external data, add a cross-domain policy file to the external data web server.
The same dashboard is working on the following conditions:
1)     In http mode(both from a hosted website and from a clarity portlet)
2)     When I click preview from Xcelsius designer.
3)     When I run the .swf file directly.
The error is coming only when I host the swf file into a website (or running from a clarity portlet).
I am using the following cross-domain-policy file.
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
     <site-control permitted-cross-domain-policies="all"/>
        <allow-http-request-headers-from domain="" headers="" secure="true" />
        <allow-access-from domain="*" secure="true" />
</cross-domain-policy>
Any comments will be appreciated here.
Thanks,

Hi
I am facing the #2032 Error while running the Dashboard in portal developed using SAP Netweaver BW connection.
Scenario:
1>Actually our dashboard changes as fiscal year or budget type changes,so we have set trigger for the queries.
2>for 3-4 trigger times the dashboard changes as required without any error but after that when we change fiscal year or budget type it shows the following error:
Error:"Cannot Access External Data"
{ The BICS Remote web Service could not process your request.Open a CSN message on component BW-BEX-ET-XC and attach the technical details of the error from the following link:
http://sgsgsav0s2006:5000/bicsremotedebug?geterrorticket=KSF-1324043982210(this link changes each time the error pops up}
This error will popup and then the dashboard randomly displays data for some queries and for some it does not pull data.
After reloading the dashboard it runs fine for 3-4 times after that it again shows the error.This happens for 4-5 times then dashboard stucks at Initializing Screen for 10 mins then #2032 error comes.Then we restart our developement portal and the Dashboard runs fine for some time.
This happens even while triggering 4 queries.
We have
   Xcelsius 2008 Sp3
   Flash Player 10
   SAP EHP 1 for SAP NetWeaver 7.0
   SAP_BW sp08
   SAP_ABA sp08
   SAP_BASIS sp08
Dont know how to check Java Stack Version.
Please reply soon,so that we can proceed.
Thanks
Edited by: chinmaypadhi on Dec 29, 2011 7:44 AM

CDR Datastreams -how to access the data?

With apologies as I posted this to the Enterprise forum, but I wasn't 100% sure where this goes.
I'm looking to create a Java class using IDL, that is then converted to CDR, and then access its CDR representation as a series of bytes. However, I'm not looking to implement an ORB, just the CDR functionality in the data streams. E.g. I see there is org.omg.CORBA.portable.OutputStream (no way to access the data that I can see though, so it seems the CDR goodness is hidden) and com.sun.corba.se.impl.encoding.CDROutputStream (but this requires a non-null ORB to intialize it even though there is a "toByteArray" method).
Does anyone know any way to do this?

venkateshge wrote:
Thanks for ur reply.
I will try that.
i created a server and a client vi for chatting .The problem is before starting the client vi it is very much required to start the server vi (otherwise it throughs an error).help me doing it independently.(if a client wants to chat with a server he should be able to do it and viceversa.)thanks
Regards,
J.Venkatesh
TCP/IP is not designed nor able to be an RPC protocol in itself where you could launch the server from the remote side. The server has to be basically started always by some means like autostarting or manual starting by the user. A good TCP/IP server is supposed to just run all the time and wait for clients to connect to it.
However you could enable the VI server in your LabVIEW program. This is also TCP/IP based so you will have to start your LabVIEW program somehow too before you can connect to it, but once it is started you can control that LabVIEW instance over the network through VI server functions. Best part is you can test it locally too by not applying any TCP/IP address when opening an application reference. And once you think it works you distribute the client to the other computer and test it remotely.
Rolf Kalbermatter
Message Edited by rolfk on 12-14-2007 11:49 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Re: BICCannot Access External Data - Error

Dear All,
I am developing xcelsius dashboards (ver 2008 SP3 ) using SAP Netweaver connection to populate the data directly from a SAP BEx query.
While refreshing the query in SAP portal with parameters, I am getting the following error.
Please guide me to resolve this error.
Error:
Cannot Access External Data
The BICS Remote Web Service could not process your request. Open a CSN message on component BW-BEX-ET-ER and attach the technical details of the error from the following link: http://bidev:50600/bicsremotedebug?geterrorticket=NEO-1279082559784
Thanks
Soma

Hi,
Is your problem resolved ??
we are also getting same error with SAP BW NW Connection
please reply as we have go live this friday
thanks
khyati

Can i access my data on time capsule from some other network

can i access my data on time capsule from some other network that is my data at home from office over internet

There is plenty of info out there if you google..
Here is a summary I just put into another thread.
Remote access has been added back into iCloud that was in MobileMe..
Read the info on setting it up from cloud service.. BTMM.
http://www.apple.com/support/icloud/back-to-my-mac/
If you want to do it without the cloud service, you have one major issue.. the public IP for WAN..
The internal IP of the TC.. which will default to 10.0.1.1 btw.. is irrelevant. It is the IP of the WAN which you use to access the TC over the internet. And here you have a problem.. the TC does not include dyndns service. So unless you have a static IP address from your ISP, this will cause you grief.
(If it is offered by your ISP.. get a static IP.. that eliminates all the issues.. and is far superior. Even dyndns service has issues if your public IP rotates too often. It is generally an extra cost item and requires a business account but some ISP offer it cheap or even free.. I joined an ISP that offered static ip for free because it gives me the ability to remote access my network without all the hassles you will see below.)
There are ways around it.. setting up your own domain for instance.
http://dyn.com/support/airport-time-capsule-with-dynamic-dns/
But it is easier to simply use a different router.. almost all of them have dyndns service available.. place the TC behind the router in bridge and forward port 548 TCP to it.
This is a bit old but still relevant.
http://gigaom.com/apple/access-your-time-capsule-over-the-internet/
Note .. there is no ftp, http, ssh (there is actually but it isn't accessible), or any other service to allow connection other than AFP.. so you must use a Mac in remote location to access the TC.
The setup for the two methods is slightly different in the TC.. in the first instance, you need to turn on WAN access via disk sharing page in the manual setup.
In the second case you do not need this.
Remember security and put strong passwords on the disk. There are still security questions about this.
If security is important.. there is a third and better (IMO) method and that is vpn.. you will need to buy a vpn router as TC also missed out on that.. establish a vpn with the main router and that will allow you access to your network.. you will also then be able to use SMB remotely not just AFP.
Also if this office is a large company they should be running a firewall, which would block your access to home. You should check your IT admin people for what is allowed.. generally the only acceptable method is vpn otherwise you can drag viruses and trojans right into the network without the firewall catching them.

ACCESS MY DATA REMOTELY

Similar Messages

Maybe you are looking for