Access not allowed on xsl files with 10.3.3

Under the Runtime Configuration Properties I have set the "disable external references" to false but I am still getting an "XML-21028: (Fatal Error) Access not allowed" when the report tries to reference a stylesheet placed in a directory under the Apache htdocs directory (The <DocumentRoot> and <Directory> have been set correctly as far as I can tell).
Steve

The app server needed to be shutdown and restarted in order for the change to this property to be recognized. However, now I have a problem with the subtemplates.xsl with a variable which is not defined: _XDONFSEPARATORS.  I can find not one reference to this property on the oracle site.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

Similar Messages

  • "Access not allowed for subject: principals=[]" Common Issue with no Repose

    Hi all,
    When upgrading from 8.1 to 8.1 SP4 (we have seen the issue as early as SP2), there is an exception thrown when trying to start the server where our application is deployed:
    <pre>weblogic.management.NoAccessRuntimeException: Access not allowed for subject: principals=[], on ResourceType: Application Action: write, Target: Deployed
    </pre>
    Our application creates an InitialContext using properties from a standard properties file, and when the "java.naming.security.principal" and "java.naming.security.credentials" properties are omitted, the server will start and deploy the application, but it naturally will not work.
    I have noticed that this issue has been brought up by several others:
    http://forums.bea.com/bea/search.jspa?q=%22Access+not+allowed+for+subject%3A+principals%3D%5B%5D%22&objID=&dateRange=all&userID=&numResults=15
    http://forums.bea.com/bea/thread.jspa?forumID=2058&threadID=200027601&messageID=200619947#200619947
    http://forums.bea.com/bea/thread.jspa?forumID=2051&threadID=200021662&messageID=200590642#200590642
    http://forums.bea.com/bea/message.jspa?messageID=200590569&tstart=0
    But have seen nothing resembling even a hint of a cause.
    Any suggestions that even get me going in the right direction would be appreciated.
    <pre>
    weblogic.management.NoAccessRuntimeException: Access not allowed for subject: principals=[], on ResourceType: Application Action: write, Target: Deployed
         at weblogic.management.internal.SecurityHelper$IsAccessAllowedPrivilegeAction.wlsRun(SecurityHelper.java:623)
         at weblogic.management.internal.SecurityHelper$IsAccessAllowedPrivilegeAction.run(SecurityHelper.java:510)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.management.internal.SecurityHelper.isAccessAllowed(SecurityHelper.java:398)
         at weblogic.management.internal.RemoteMBeanServerImpl.private_setAttribute(RemoteMBeanServerImpl.java:430)
         at weblogic.management.internal.RemoteMBeanServerImpl.setAttribute(RemoteMBeanServerImpl.java:387)
         at weblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:741)
         at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:475)
         at weblogic.management.configuration.ApplicationMBean_Stub.setDeployed(ApplicationMBean_Stub.java:408)
         at weblogic.management.mbeans.custom.ApplicationManager.setState(ApplicationManager.java:593)
         at weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(ApplicationManager.java:740)
         at weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManager.java:501)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:754)
         at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:733)
         at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:509)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1560)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1528)
         at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:988)
         at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:946)
         at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
         at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:481)
         at weblogic.management.configuration.ApplicationManagerMBean_Stub.start(ApplicationManagerMBean_Stub.java:677)
         at weblogic.management.Admin.startApplicationManager(Admin.java:2821)
         at weblogic.management.AdminServerAdmin.startApplicationManager(AdminServerAdmin.java:624)
         at weblogic.management.Admin.finish(Admin.java:2299)
         at weblogic.management.AdminServerAdmin.finish(AdminServerAdmin.java:458)
         at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:971)
         at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
         at weblogic.Server.main(Server.java:32)
    </pre>

    For others who have received this error, I'll post what I think has turned out to be the cause.
    Refer to
    http://e-docs.bea.com/wls/docs81/jndi/jndi.html#471919
    Which says:
    =====
    When you create a JNDI Context with a username and password, you associate a user with a thread. When the Context is created, the user is pushed onto the context stack associated with the thread. Before starting a new Context on the thread, you must close the first Context so that the first user is no longer associated with the thread. Otherwise, users are pushed down in the stack each time a new context created. This is not an efficient use of resources and may result in the incorrect user being returned by ctx.lookup() calls.
    =====
    Our application caches the Context created, and that Context is used by other objects to perform lookups. Prior to Sp2, this caused no issues when including the username and password as part of the properties passed to the InitialContext constructor.
    I presume that closing the Context after it has been used would be the proper fix for this, but right now this Context is used in too many places once it is created. I was able to combat the issue by removing the username and password properties (java.naming.security.principal & java.naming.security.credentials) from the properties file. It seems to work as expected.

  • Trying to login to software program known as hamspher (vip simulated ham radio,  it downloaded the program but it will not allow me to login with call sign and pin.  it has to be opened with what they call a jar file.  how do i do this?

    trying to login to software program known as hamspher (vip simulated ham radio,  it downloaded the program but it will not allow me to login with call sign and pin.  it has to be opened with what they call a jar file.  how do i do this?

    This is compatible with Mac? Especially Snow Leopard (if that is what you'e running)?
    Have you considered posting your question in their forums?
    Here is some information re. the jar file:
    http://ostermiller.org/opening_jar_files.html

  • SQLException: Access not allowed (problem with ACL)

    Hi, I'm getting the following error when I start my Weblogic (7.0) server.
    java.sql.SQLException: weblogic.common.ResourceException: Access not allowed
    I followed these steps to Provide the necessary ACl permisiions:
    1.     Compatibility Security => ACLs
    Create a new ACL:
    name : weblogic.jdbc.connectionPool.yourPoolname
    permission : admin
    group : Administrators
    2. Create a new Connection Pool:
    ACL Name : weblogic.jdbc.connectionPool.yourPoolname
    In 'Target' tab, choose server and click the Apply button.
    I even checked fileRealm.properties, the user admin123 (the user name with which I start the server), is included in all the connectionpool ACL lists. I restarted the server to pick the new changes but it still gives the same errors.
    Please help,
    Thanks

    You need to create the correct ACL for the DataSource following this procedure in the Administration Console:
    1. Compatibility Security => ACLs
    Create a new ACL:
    name : weblogic.jdbc.connectionPool.yourPoolname
    permission : admin
    group : Administrators
    2. Compatibility => click Refresh button
    3. Services => JDBC => Connection Pool
    Create a new Connection Pool:
    ACL Name : weblogic.jdbc.connectionPool.yourPoolname
    In 'Target' tab, choose server and click the Apply button.
    4. Services => JDBC => Data Sources
    You can create a new Data Source using this connection pool successfully
    Regards,
    Prasanna Yalam

  • Java.sql.SQLException: Cannot obtain connection after 3600 seconds. , Exception = Access not allowed

    Using Weblogic Platform 7.0 (installed from platform700_win32.exe),
    Running a BPM Doamin(WLIDomain with BPM only).
    When I try to access my entity bean(CMP), the following exception is getting thrown.
    I have seen a similar post in here, but the answer to that post, which says to
    provide ACL. does not apply quite well my scenario.
    To do this, I right clicked on the connection pool and selected define Ploicy..
    It shows two options
    RealmAdapterAuthorizer and DefaultAuthorizer; On DefaultAuthroizer i specified
    role accessing the resource would be "everyone". - restarted the server - but
    still the same error.
    Please suggest a solution if any. Do i have to get some service pack for this?
    TIA
    Ranjith.

    We have never seen a case yet where this was not a permissions problem.
    Do you have a fileRealm.properties file as part of your configuration?
    "Ranjith" <[email protected]> wrote in message
    news:3f0fdeb3$[email protected]..
    >
    java.sql.SQLException: Cannot obtain connection after 3600 seconds. ,Exception
    = Access not allowed
    java.sql.SQLException: Cannot obtain connection after 3600 seconds. ,Exception
    = Access not allowed
    atweblogic.jdbc.jts.Connection.wrapAndThrowSQLException(Connection.java:701)
    atweblogic.jdbc.jts.Connection.getOrCreateConnection(Connection.java:623)
    atweblogic.jdbc.jts.Connection.prepareStatement(Connection.java:133)
    atweblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.ja
    va:139)
    atweblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:81
    atservice.samplemgt.v1_0.ejb.entity.BanksampletypeCMP_ckv0ao__WebLogic_CMP_RDB
    MS.ej
    bFindAll(BanksampletypeCMP_ckv0ao__WebLogic_CMP_RDBMS.java:873)
    at java.lang.reflect.Method.invoke(Native Method)
    atweblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.collectionFinder(RDBMSPersi
    stenceManager
    java:300)
    atweblogic.ejb20.manager.BaseEntityManager.collectionFinder(BaseEntityManager.
    java:715)
    atweblogic.ejb20.manager.BaseEntityManager.collectionFinder(BaseEntityManager.
    java:688)
    atweblogic.ejb20.internal.EntityEJBLocalHome.finder(EntityEJBLocalHome.java:47
    6)
    at ...

  • Weblogic 7.0, Oracle9i - "Access not allowed" error

    All:
    I am looking for any suggestions/help/advice/etc on my problem. The background is this, I have an application that uses 3 MDBs, 3 Entity Beans, is deployed on Weblogic7.0 (the latest), and needs to query an Oracle9i database.
    I have set up my drivers and URL, they work fine under a normal java class making a connection. They also return "success" when using dbping to test the connection, so the set up is right.
    When Weblogic starts, the connection pool is made, the DataSource is fine -- but when the EJB is deployed it comes back with the SQLException "Access not allowed".
    I've put the classes12.zip file at the beginning of the classpath, modified the setenv.cmd file so the PATH includes %ORACLE_HOME%\bin and %WL_HOME%\bin\oci920_8.
    I've also put in the following in the weblogic-ejb-jar file:
    <security-permission>
    <description>Oracle</description>
    <security-permission-spec>
    grant {
    permission java.lang.RuntimePermission "loadLibrary.ocijdbc9";
    </security-permission-spec>
    </security-permission>
    I've even tried to do what the Security Manager portion of the Weblogic documentation says to do. It said to "activate the security manager" by putting the following line in the startWeblogic file:
    -Djava.security.manager
    None of these have worked -- I keep getting that error. Like I said previously I have tried the connections and they have worked through other methods.
    I've tried everything, including using an XA driver -- to no avail. My forehead is getting really sore from banging it on the monitor --- can you help???? :/
    Thanks!
    The connection pool information follows (from the config.xml file):
    <JDBCConnectionPool CapacityIncrement="1"
    DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="1"
    LoginDelaySeconds="1" MaxCapacity="36" Name="P3IConnectionPool"
    Properties="user=EI_SERVICES;password=EI_SERVICES;dll=ocijdbc9;protocol=thin"
    RefreshMinutes="0" Targets="beaserver"
    TestConnectionsOnReserve="true" TestTableName="STATE_LKUP" URL="jdbc:oracle:thin:@192.168.23.45:1521:ORASUN"/>

    Just in case anyone needs this in the future....
    After creating the connection pool in Weblogic 7.0 (using the Weblogic console) right click on the connection pool and select "Define Policy", select "Default Authorizer", then enter "Caller is a member of the group everyone" and apply.
    That takes care of the problem... didn't happen in Weblogic 6.1

  • AS - all page items, access not allowed

    I am upgrading an AppleScript from working with InDesign CS5.5 to CS6.    When I recompile I get the syntax error:
    "Can't set <<constant dpvtdppv>> to <<class aPgi>>.
    Access not allowed."
    My statement is a simple
    "set pList to get all page items" within a tell myDoc section.
    In reviewing the AS guide for InDesign CS6, the notes say that Chapter 4, covering all page items,  was not changed in CS6.  Page 113 of the guide phrases the statement without a "get", so my statement would be
    "set pList to all page items".  This fails with the same error.  As my code gets plenty of use under CS5 and CS5.5, I suspect a dictionary error from Adobe.
    Anyone with ideas?

    G'day
    try :
    set pList to every page item
    m.

  • BB Pearl 8130 "access not allowed!" when trying to download Blackberry App World

    Hi, well I am trying to download blackberry app world onto my blackberry pearl 8130 and whenever I try to download it it goes through the language prompts but then goes to a page with "access not allowed" My device software is v4.5, I am currently in Canada, I have the data plan, I can use the internet browser and my carrier is Telus. All help is appreciated, please and thank you!

    Hi and Welcome to the Forums!
    "Access Not Allowed"? Is that the precise and exact message? If not, please do provide the precise message.
    Please check this page to ensure you meet the minimum requirements (including if it is available in your country):
    http://na.blackberry.com/eng/services/appworld/download.jsp
    If it is available in your country and you feel you meet the device-level system requirements, then contact your carrier to ensure that you meet the service plan (from them) requirements for access (via their network) to AppWorld. Generic data plans, even unlimited, are usually not sufficient...a specific BB data plan is normally required.
    Lastly, do be aware that AppWorld is merely a portal, vending apps developed mainly by others. As such, it is not your exclusive procurement source -- there are others that you can try (e.g., Handango, Handmark, BPlay, GetJAR or Mobihand). I have found that there are very few apps that are exclusive to AppWorld. You can search the on-line catalog and then search out other procurement sources, including quite often the developer website itself.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • ResourceException: Access not allowed (when trying to grab a connection from weblogic pool)

    I am using WLS7 with SP1.
    I just recently migrated from WLS6.0. When my code tries to grab a
    connection from the pool, it throws an exception
    java.sql.SQLException: Pool connect failed:
    weblogic.common.ResourceException: Access not allowed
    at weblogic.jdbc.pool.Driver.connect(Driver.java:202)
    Does anyone know if anything changed from 6.0 to 7?
    Here is a piece of the code that throws exception.
    Driver driver =
    (Driver)Class.forName("weblogic.jdbc.pool.Driver")
    .newInstance();
    conn = driver.connect("jdbc:weblogic:pool:" +
    dbName, null);
    Thanks in advance.

    Hi Jung,
    "Jung Yang" <[email protected]> wrote in message
    news:[email protected]...
    Do you know how to change security setting on the connection pool?
    Thanks.WebConsole:
    1.Compatibility Security => ACLs
    Create a new ACL,
    name : weblogic.jdbc.connectionPool.yourPoolname
    permission : reserve, reset
    group : everynone
    2.Services => JDBC => Connection Pool
    Create a new Connection Pool
    ACL Name : weblogic.jdbc.connectionPool.yourPoolname
    In 'Target' tab, choose server and click the Apply button
    Slava
    >
    "Slava Imeshev" <[email protected]> wrote in message
    news:[email protected]...
    Hi Jung,
    Could you try providing weblogic user name and password
    in the properties?
    Could you also check security setting of the connection pool?
    Regards,
    Slava Imeshev
    "Jung Yang" <[email protected]> wrote in message
    news:[email protected]...
    Well that is exactly what I am doing. The variable dbName is database
    connection pool name that I created in weblogic console. Again, it
    worked
    in WLS6 but after migration, it stopped working.
    Thanks.
    "Mitesh Patel" <[email protected]> wrote in message
    news:[email protected]...
    In my code I am supplying name of the connection pool already
    created
    in
    weblogic server. I am asking you to get connection from the pool
    using
    pool
    driver.
    In your case you are trying to create connection straight to
    database
    using pool
    driver.
    What I am asking is pass name of the connection pool instead of
    database
    name.
    Thanks,
    Mitesh
    Jung Yang wrote:
    What would be the difference between your code and mine? Mine
    simple
    appends dbName string value for connection pool name at the end of
    "jdbc:weblogic:pool:"? And why same exact code would work in WLS6and
    not
    work in WLS7?
    Thanks.
    "Mitesh Patel" <[email protected]> wrote in message
    news:[email protected]...
    conn = driver.connect("jdbc:weblogic:pool:" +
    dbName, null);Instead of doing this what if you use
    Connection conn =
    myDriver.connect("jdbc:weblogic:pool:myConnectionPool", null);
    Will you please try this and see if that helps?
    Mitesh
    Jung Yang wrote:
    Isn't that exactly what I posted for my code piece?
    Thanks.
    "Mitesh Patel" <[email protected]> wrote in message
    news:[email protected]...
    Try As described below:
    The following example demonstrates how to use a database
    connection
    pool
    from a servlet.
    Load the pool driver and cast it to java.sql.Driver. The
    full
    pathname
    of
    the driver is weblogic.jdbc.pool.Driver. For example:
    Driver myDriver = (Driver)
    Class.forName("weblogic.jdbc.pool.Driver").newInstance();
    Create a connection using the URL for the driver, plus
    (optionally)
    the
    name of the registered connection pool. The URL of the pool
    driver
    is
    jdbc:weblogic:pool.
    You can identify the pool in either of two ways:
    Specify the name of the connection pool in a
    java.util.Properties
    object
    using the key connectionPoolID. For example:
    Properties props = new
    Properties();props.put("connectionPoolID",
    "myConnectionPool");Connection conn =
    myDriver.connect("jdbc:weblogic:pool", props);
    Add the name of the pool to the end of the URL. In this case
    you
    do
    not
    need a Properties object unless you are setting a username
    and
    password
    for using a connection from the pool. For example:
    Connection conn =
    myDriver.connect("jdbc:weblogic:pool:myConnectionPool",
    null);
    Note that the Driver.connect() method is used in theseexamples
    instead of
    the DriverManger.getConnection() method. Although you may
    use
    DriverManger.getConnection() to obtain a databaseconnection,
    we
    recommend
    that you use Driver.connect() because this method is not
    synchronized
    and
    provides better performance.
    Note that the Connection returned by connect() is an
    instance
    of
    weblogic.jdbc.pool.Connection.
    Call the close() method on the Connection object when youfinish
    with
    your
    JDBC calls, so that the connection is properly returned to
    the
    pool. A
    good coding practice is to create the connection in a try
    block
    and
    then
    close the connection in a finally block, to make sure the
    connection
    is
    closed in all cases.
    conn.close();
    Mitesh
    Jung Yang wrote:
    I am using WLS7 with SP1.
    I just recently migrated from WLS6.0. When my code tries
    to
    grab a
    connection from the pool, it throws an exception
    java.sql.SQLException: Pool connect failed:
    weblogic.common.ResourceException: Access not allowed
    at
    weblogic.jdbc.pool.Driver.connect(Driver.java:202)
    Does anyone know if anything changed from 6.0 to 7?
    Here is a piece of the code that throws exception.
    Driver driver =
    (Driver)Class.forName("weblogic.jdbc.pool.Driver")
    .newInstance();
    conn =
    driver.connect("jdbc:weblogic:pool:"
    +
    dbName,
    null);
    >>>>>>>>>
    Thanks in advance.

  • "Access not allowed?"

    I set up my wifi, and when I go to the browser, I can go to Google and other websites correctly. When I tried to download app world, I got the message "Access not allowed". When I pressed the return key, it said my download was successful, but app world is not downloaded on my phone.
    My brother and sister have the same phone, and they were able to download app world with no problems.
    Anyone know how to fix this?

    I didn't mean to steal your thunders. LOL :-D No worries there friend. Hey... I at least got a helpful... whatever that amounts to in these new forums how is the bike riding, have you learn to breath yet?Haven't actually gotten to do any riding yet. So far I've been clearing my mind the old fashioned way. I've been "footing it" everywhere. Still does the same job though. Allows me a chance to clear my mind and get some exercise at the same time.
    The only reason I haven't been riding yet is my bike still needs some more TLC before it'll allow me a ride without stranding me somewhere. Guess that's what I get for leaving it outside in Florida for 3 years. Plan on looking at it some more tomorrow and I should have it fixed then so I can get to riding! I've so been looking forward to getting back into it!!!
    There is something really odd with ASI definitely agree.
    You've got the right idea about how to handle the inconsistencies though. Treat it as though it's a three year old and hold its hand all the way through every little step!
    Good to hear from you, hope all is going well in your part of the world! I'm slowly getting my self back and it's such a strange, but good, feeling!

  • I can no longer access a password protected Numbers file with the correct password. Error message only says the file "cannot be opened."

    I'm using Numbers version 3.2.2.
    Suddenly I cannot access my password protected Numbers file with the correct password. I have the correct password written down so I know I haven't made a mistake.
    The response box that pops up says that the file cannot be opened. There are no other options for me to choose from.

    Also, I tried to open it through an older version of Numbers but it sent this error message.

  • IBooks Author. I am not allowed to sign in with my Apple ID on iTunes Connect when I am trying to publish my book in iBooks Author. I do not understand why because I have fulfilled the first steps creating an account and informed my IRS tax number...

    I am not allowed to sign in with my Apple ID on iTunes Connect when I am trying to publish my book in iBooks Author. I do not understand why because I have fulfilled the first steps creating an account and informed my IRS tax number...

    The recommendation is always to make another ID for use with a paid books account. And while I can't swear this is at the root of your issue, you should in any case reach out to Apple for assistance on this one, I think.
    Account Applications:
    [email protected]
    Global Phone Support
    We have expanded English-language publisher phone support. To make contacting the iBookstore support even easier, new local phone numbers are now available for Australia, France, Germany, Italy, Netherlands, Spain, and the U.K. Support is available Monday to Friday, from 7 a.m. to 5 p.m. (PT).
    Country
    Phone Number
    Australia
    1300 307 504
    Note that this is a low tariff number.
    France
    0805 540 117
    Germany
    0800 664 5307
    Italy
    800 915 902
    Netherlands
    0800 0201 578
    Spain
    900 812 687
    U.K.
    0800 975 0615
    U.S.
    +1 (877) 206-2092
    Toll-free from U.S. and Canada.
    Good luck

  • Adobe PDF iFilter 9 for 64-bit platforms does not index my PDF files with Digital Sign

    Adobe PDF iFilter 9 for 64-bit platforms does not index my PDF files with Digital Sign, why?

    hi  Phillip
    i am not sure what you mean
    I downloaded the ifilter and installed it
    then configured everything as shown in the pdf file
    I tried indexing from scratch exactly as i did successfully in the other computer
    and got some errors in the log file
    i checked the sql server log and the event viewer logs and got :
    Error '0x80004005' occurred during full-text index population for table or indexed view '[Pirsumim_ext_ck].[dbo].[T_PUBLICATIONS]' (table or indexed view ID '2073058421', database ID '14'), full-text key value 0x0000027A. Attempt will be made to reindex it.    
    The component 'PDFFilter.dll' reported error while indexing. Component path 'C:\Program Files\Adobe\Adobe PDF iFilter 9 for 64-bit platforms\bin\PDFFilter.dll'.   
    Informational: Full-text retry pass of Full population completed for table or indexed view '[Pirsumim_ext_ck].[dbo].[T_PUBLICATIONS]' (table or indexed view ID '2073058421', database ID '14'). Number of retry documents processed: 1. Number of documents failed: 1.
    Changing the status to MERGE for full-text catalog "Pirsumim_ext_catalog_ck" (5) in database "Pirsumim_ext_ck" (14). This is an informational message only. No user action is required.
    Informational: Full-text Auto population initialized for table or indexed view '[Pirsumim_ext_ck].[dbo].[T_PUBLICATIONS]' (table or indexed view ID '2073058421', database ID '14'). Population sub-tasks: 1
    the same dll worked fine in another computer...
    how can i see more details what is wrong with this dll  ?
    meidad

  • Story does not correctly export fdx file with scene numbers? Bug needs to be fixed.

    Story does not correctly export fdx file with scene numbers? Bug needs to be fixed.

    Okay, Even if i remove the scene numbers from Story and export the file to Final Draft 8. The format in incorrect. The "transitions" ex. CUT TO:  are not in the correct allignment. Also there are numbers on each of the dialogues
    Pretty much alot of the formatting is not the same. Spaces  that break dialouge and action which are there in Story, are not converted over to Final Draft.
    Please fix this as soon as possible.
    thanks,
    Rohit

  • Err : "Access Not Allowed to oracle.jdbc.driver.OraclePreparedStatement"

    Hi,
    How to resolve the error "Access Not Allowed to oracle.jdbc.driver.OraclePreparedStatement"
    in jdeveloper?
    Or
    Can you please give me some sample pgms which uses oracle.jdbc.driver.OraclePreparedStatement?
    Thanks in advance,
    Senthil Kumar M.

    This is the error from the trace logs...
    application [XMII] Cannot send an HTTP error response [500 Application error occurred during request processing. (details: com.sap.xmii.Illuminator.logging.LHException: com.sap.xmii.Illuminator.logging.LHException: java.lang.NoClassDefFoundError: oracle.jdbc.driver.OraclePreparedStatement)].
    The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: The stream is closed.
    Exception id: [0050569D6ACD006A0000010C000023D300046F4B653C90D7]
    I could not find anything on the SDN regarding this message, so I may need to open up an OSS note.
    Thanks
    Skip Ford

Maybe you are looking for