Access of network for first time only
Hi there,
I have encountered some problems whenever my J2ME application wants to connect to the servlet via the HttpConnection. When i test on the real device, this alert message "Do you wish to access to the network " will always prompt me whenever i want to use the network.
So when i open the httpConnection 4 times, this alert message will prompt me 4 times.Is there any ways for me to eliminate this prompting? As far as i'm concerned, i know there's this feature in the mobile device that allows the setting of network access to ask for the first time only. But i want to set it in codings.
Can anybody help me in this matter?Thanks!
You also need to set your application domain to trusted. Else even if the user sets the permission to always allow ... blah blah blah, the app will still ask every time. You do this by buying a certificate from a TTP.
Similar Messages
-
Accessing gophone account for first time
I am trying to access my account in order to refill my balanca, but I am currently out of the US and am using a foreign sim card and never logged into my account before. It tells me they will send me the temporary password to me phone so I can access it but I am not using that number so the text wont reach me. What can I do?
Hi there! @marcec thanks for posting your concerns. I’m sorry to hear you are having difficulty refilling your balance. I’m afraid there is not an option to access your online account for the first time without first receiving the temporary password to the GoPhone number. This ensures that your account access is secure.
Please keep in mind that you do have 59 days to refill the GoPhone account without losing the number.
We apologize for any inconvenience this has caused.
Charise
-
Help with iTunes
Purchases cannot be transferred to a new Apple ID.
You can stop receiving their info by signing out of iCloud. -
help. tried for first time to use FaceTime with another iPhone user & call refused to connect. Call would dial, allow us to accept call, then error message "FaceTime failed" would appear & call disconnect. we are both on wi-fi networks, both phones have updated software & both enabled FaceTime with iTunes logged in. don't know what else to do to get FaceTime to connect. Someone please help.
Thanks Helen for the response. At least you can get some of the contacts to work. Absolutely none of mine will. Feel like my phone is cheating me out something it should do. Think I'm going to just have to dump all the Apple products in general because this phone hasn't worked right since I got it.
-
Tried to trim a video clip for first time iOS 6 trimming in progress last 10 hours. Not responding cant access photos. Help
Reset your device by pressing the home button along with the sleep/wake button until you see the apple, then let go.
-
I start my new iPhone 5s 64 for first time , no hello screen , only white screen with black apple logo
How can I start my iPhone (I already did restart - it didn't help)Did you activate the phone already?
-
Mobile Accounts: Sync new accounts first time only.
When a user logs into a computer for the first time it is set to create a mobile account, however we don't use home directory syncing because the typical size of our 200 users' home directories is over 100Gb which makes syncing home directories not viable.
It would be very handy, though, to have it sync the first time only at login so that our user directory template is automatically copied over which will save a lot of time setting up new users.
Accoring to Apple's User Management v10.5 documentation on page 203:
+"To initially sync local and network homes so that the network home folder replaces the local home folder, choose “Create home with default sync settings."+
(This refers to Workgroup Manger -> Preferences -> the Mobility pane -> Account Creation -> Creation tab)
After testing, though, it is quite clear that this does not work - at least on my setup. I can get it to work by going to the Rules tab in the Mobility pane and ticking the sync at login and logout, but this syncs every time on both login and logout, which is not what I want to achieve.
Any ideas?I also mentioned, that some Safari-Extensions I installed on the iMac are missing now on my iMac-Profile. I also mentioned, that some settings for 1Password are reset to default values.
-
I have an epson xp600 and a mac book pro. Wireless printing is OK if I'm lucky for one time only then a 'failed to connect' message so I have to delete and re add the printer to get it working again (but just once!) then the same occurs. Why?
I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
Click Add, then you can close System Preferences.
There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem. -
How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes? I need step by step instructions for first-time sync with ipad mini. Thanks.
If you synced it many times, you have to have a backup. It's just a question of how old that backup is now. When did you last sync?
First of all launch iTunes on your computer and go to Edit>Preferences>Devices. Do you see any backups for you iPad in that window? If so, how new is the newest backup? That will be the backup that you will want to use. But remember that if you use that backup and it is one month old, you can only restore from that date back in time. Anything that you did on the iPad in the past month will not be in that backup.
Turn on the new iPad Minin and start activating OTA via WiFi. You will get to a certain point in the process where you will be given the choice to Set up as new, Restore from iCloud - or Restore from iTunes. You will want to select Restore from iTunes.
That is the short and sweet version. There are step by step instructions in this article. This applies to the mini as well as the iPad 4 or the iPad 3 for that matter.
http://www.everythingicafe.com/how-to-set-up-new-ipad/2012/03/16/ -
Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
http://support.apple.com/kb/HT2292
http://support.apple.com/kb/TS1369
http://support.apple.com/kb/HT1923
http://en.kioskea.net/forum/affich-17997-ipod-not-detectedI was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause. -
if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in America?
please i need help, im worried that if I connect my ipod here, it will burn or sometihng bad.Just connect it to a computer's USB port.
Most wall chargers are dual voltage (110- 220 volts) and only require a plug adopter. Check the wall charger to see if yours is. -
Performance issue in browsing SSAS cube using Excel for first time after cube refresh
Hello Group Members,
This is a continuation of my earlier blog question -
https://social.msdn.microsoft.com/Forums/en-US/a1e424a2-f102-4165-a597-f464cf03ebb5/cache-and-performance-issue-in-browsing-ssas-cube-using-excel-for-first-time?forum=sqlanalysisservices
As that thread is marked as answer, but my issue is not resolved, I am creating a new thread.
I am facing a cache and performance issue for the first time when I try to open a SSAS cube connection using Excel (using Data tab -> From Other Sources --> From Analysis Services) after daily cube refresh. In end users system (8 GB RAM but around
4GB available RAM), for the first time, it takes 10 minutes to open the cube. From next run onwards, its open up quickly within 10 secs.
We have daily ETL process running in high end servers. The configuration of dedicated SSAS cube server is 8 core, 64GB RAM. In total we have 4 cube DB - out of which for 3 is full cube refresh and 1 is incremental refresh. We have seen after daily cube
refresh, it takes 10 odd minutes to open the cube in end users system. From next time onwards, it opens up really fast with 10 secs. After cube refresh, in server systems (32 GB RAM, around 4GB available RAM), it takes 2 odd minutes to open the cube.
Is there, any way we could reduce the time taken for first attempt ?
As mentioned in my previous thread, we have already implemented a cube wraming cache. But, there is no improvement.
Currently, the cumulative size of the all 4 cube DB are more than 9 GB in Production and each cube DB having 4 individual cubes in average with highest cube DB size is 3.5 GB. Now, the question is how excel works with SSAS cube after
daily cube refresh?
Is it Excel creates a cache of the schema and data after each time cube is refreshed and in doing so it need to download the cube schema in Excel's memory? Now to download the the schema and data of each cube database from server to client, it will take
a significant time based on the bandwidth of the network and connection.
Is it anyway dependent to client system RAM ? Today the bigest cube DB size is 3.5 GB, tomorrow it will be 5-6 GB. Now, though client system RAM is 8 GB, the available or free RAM would be around 4 GB. So, what will happen then ?
Best Regards, Arka Mitra.Could you run the following two DMV queries filling in the name of the cube you're connecting to. Then please post back the row count returned from each of them (by copying them into Excel and counting the rows).
I want to see if this is an issue I've run across before with thousands of dimension attributes and MDSCHEMA_CUBES performance.
select [HIERARCHY_UNIQUE_NAME]
from $system.mdschema_hierarchies
where CUBE_NAME = 'YourCubeName'
select [LEVEL_UNIQUE_NAME]
from $system.mdschema_levels
where CUBE_NAME = 'YourCubeName'
Also, what version of Analysis Services is it? If you connect Object Explorer in Management Studio to SSAS, what's the exact version number it says on the top server node?
http://artisconsulting.com/Blogs/GregGalloway -
Itunes application error when attempting to open for first time. HELP
Running windows xp pro, just bought new ipod classic, installed itunes software. When attempting to open for first time i get an itunes.exe - application error, error message that reads "The instruction at "0x100001040" referenced memory at "0x100001040". The memory could not be "read". Click ok to terminate the propgram. Click on CANCEL to debug the program. I have tried re-installing several times, cleaned temp etc. Nothing. Please help, i really want to start using my new ipod.
You have to unhide your library folder and adjust the user permissions to allow write access.
Mylenium -
SQL Server Management Studio - Configuring the environment for first time use
Hi
I have recently switched my local 'My Documents' folder location to a network drive that I 'make available off line' to allow on-line/off-line work and synchronisation when I am working in and out of the office.
When I load my SQL Server Management Studio 2005 I frequently get 'Microsoft SQL Server Management Studio is configuring the environment for first time use'.
Management Studio them loads and I can continue without problem.
I am guessing it is trying to make reference to some settings file. Any ideas? I wonder if I can change/move these settings elsewhere to a local drive?
ThanksHi,
There is bug report of this issue:
http://connect.microsoft.com/SQLServer/feedback/details/126364/configuring-enviroment-for-the-first-time-every-time-in-ms-sql-server-management-express
"SQL Server Management Studio Express saves the settings for the user in ...\Documents and Settings\<User Profile>\Local Settings\Application Data\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM
and in ...\Documents and Settings\<user profile>\Application Data\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM
if any of these files are not available or unusable, SSMSE will generate new ones."
Hope this helps.
BR,
JoukoK -
X230 - Setup Is Preparing Your Computer For First Time Use
Dear all,
I just received my X230 bought on Ebay and as I first turned on the computer, Windows was frozen and showed "Setup Is Preparing Your Computer For First Time Use" for hours (I guess its a whole day). Since I do not have any recovery media provided, does anyone has alternative solution?
Thanks in advance!Thanks! It took me a whole day to figure out what happened and I ended up format the whole drive and reinstall the windows. Yes, you are right, X230 is a good machine and acutally I was thinking to puchase X240 since there is kind of back to school program that you can purchase X240 at a deep discount price. After so many bad comments I chose X230 instead for:
1. Physical Trackpad button (which is extremely important as I ONLY use trackpoint)
2. 2 ram slots
3. normal voltage CPU
I am surfing the net with X230 and I am so happy I bought this.
Maybe you are looking for
-
Obtaining comma-separated list of text values associated with bitwise flag column
In the table msdb.dbo.sysjobsteps, there is a [flags] column, which is a bit array with the following possible values: 0: Overwrite output file 2: Append to output file 4: Write Transact-SQL job step output to step history 8: Write log to table (over
-
Download error in creative cloud, won't let me install updates.
download error in creative cloud, won't let me install updates. Evert time I hit reload, It keeps saying download error. I uninstalled the cloud, and Re installed it, and still have issues
-
Log Report - Why wont logic open!
Process: Logic Pro [234] Path: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro Identifier: com.apple.logic.pro Version: 8.0.0 (1437.23) Build Info: Logic-14372300~12 Code Type: X86 (Native) Parent Process: launchd [84] Date/Time: 2010-01-21 21:4
-
Can I deploy the session bean to 9i in the JDeveloper3.2
dear ONT My JDeveloper3.2 can't find the method to deploy the session bean to 9i. sk
-
Multi-Counter Plan with multiple Equipments
Hello, We would like to track maintenance costs at Equipment level. In multi-counter maintenance plan, is there a way to enter multiple equipments in one mainteance plan? Thanks a lot, Venu