Access over ActiveSync

Hi, I have tried to connect my Q10 to Lotus Traveler through ActiveSync directly.
But I always shows the message: "Server not found"
When I try it with a Z10 it works fine.
Than you for a feedback

Hi and Welcome to the Community!
If you are using the wizard, try the manual configuration method instead. Also, you may need to involve your AS admins. Please also check that you can properly integrate other email accounts (e.g., gmail, yahoo, etc.) to the Q10.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Ftp and http access over XDB repository is not allowed...

When I try to execute the following command on a reasonably fresh Oracle 11 installation:
insert into "XMLTEST" ( "name", "xmlfof" ) values ( 'small', DBMS_XDB.GETCONTENTXMLTYPE('/public/small.xml') );
-- The schema is correctly registered, the file "small.xml" is in the /public repository folder, the user has every conceivable role and priviledge
-- http access works fine from a remote location, tried to execute the command on the server and from remote system...
I get the following error message:
ORA-31020: Der Vorgang ist nicht zulässig, Ursache: For security reasons, ftp and http access over XDB repository is not allowed on server side ORA-06512: in "XDB.DBMS_XDB", Zeile 1915
Searching for an answer on the forum didn't produce any concreate explanation... Does anyone have any idea how to solve this problem?

As it turns out, the XML file contained a reference to a DTD at an external web-site, which caused the problem - it was identical to that described here:
Re: ORA-31020 when using XML with external DTD or entities
After removing the reference, everything works perfectly...

App not working properly when access over vpn

hi,
Strange behavior of application when access through vpn. The application keeps on reloading endlessly. And other application renders completely but when the tab is clicked it will reload the whole page displaying the same tab. Is ADF has an issue when access over proxy?
Both application is build using ADF 11g and is implemented through regions.
Thanks in advance.

I think there something to do with PPR or calling the region or am I missing something? The page that keeps reloading has taskflow with activation is immediate but the refresh is set to IfNeeded. Then the page with tabs, the content of the tab are taskflows as well.
Thanks in advance.

Slow internet access over 3G

Since 5/31/12, my internet access over 3G has been super duper slow.
I can see that a request is going out from the phone, but the phone just sits there saying 'requesting' this is happening with any site I visit. Anyone else seeing this behavior? I live in the San Francisco Bay Area. I've been seeing this problem in the South Bay and North Bay.

I have experienced very to to connect for about a week. Contacted support by email yesterday and got this response this morning. Surprisingly, it was better today.
"There are different factors that affect the speed of your service which
include both the phone itself and the network signal you are receiving. We
certainly are not intentional causing any slowness of service to get customers
to change from the Unlimited Data plan. The plan does not have any bearing on
the speed of service. To be able to properly determine and resolve your issue we
need to complete troubleshooting with you. Please contact our Technical Support
at 800-922-0204 for further assistance. "

I do not own neither a Mac nor an iOS devices. May I still be able to use all features of Time Capsule, including remote access over the internet?

As described above.
I do not own neither a Mac nor an iOS devices. May I still be able to use all features of Time Capsule, including remote access over the internet?

You will have setup issues.. as the latest AC model requires a Mac or iOS device.. eventually apple will release a windows version of the utility.. and the current one does partly work but Apple seem in no hurry.
You can find a Mac or iPad equipped friend to do the setup.. once setup the Windows computer can use it.
BUTT you cannot access it from remote..
Not with windows. You need BTMM and iCloud account. AFAIK even with those you cannot reach the TC.
You can do it manually.. using a vpn. Buy a proper vpn router and use a vpn client on the windows computer.. the TC would be in bridge to the network..
Apple really did not make this for windows.. and SMB access is only provided on LAN access not WAN.

Custom Access over msmdpump

Hi,
Lets say we have two SSAS Databases. In each we have Dynamic Dimension Security implemented. The Database are only accessable to Users by the msmdpump.dll. We have some Standard Reports in Xlcubed which can be accessd by Sharepoint.So far so good.
Now our customer wants a custom security for the cubes in that way, that some Users whcih have access to cube and can use the Standard Reports are NOT allowed to use the Client Excel or other Analysis Tool for Adhoc Analysing. So they are only allowed to
use the Standrd Reports.
My first idea was to use a Proxy (as described here:
SSASProxy) doesnt meet our needs.
My second idea was to implement a Custom Module for IIS, but "unfortunatly" the messages between client and server are encrypted. for details:
XMLA over TCP/IP.
Could you imagine a possible way of implementing that?
Thanx in Advance for your Creativity

Hi. Thanx.
My actual solution looks like this: 1 Role on the cube for all users which are allowed to analyze. So these users can access the cube by the normal way over the datapump.
A second role which includes only 1 Sys User. Then I use the Proxy by which everybody can connect. In this proxy I check out the user and from where it comes(Web, Excel,..) and where ihe wants to connect and open a new Webrequest to the Datapump by the Sys
User. In the CustomData Property I add the Username. So all our Standardreport will use the Proxy.
Cons:
ensure to determine from where the user is coming
performance? when all user connecting to the cube with one sys-user
if a new Standardreport is published, we must ensure that this report is using the proxy (while in design, some connectionmapping,..)

Guest Wireless access over WAN

Hello Everyone,
We have around 45 remote location , all are connected with GRE Tunnels.
44 location have there own WLC which are managed by NCS and ISE in HQ , All 44 location have Wireless access for Guest and INternal Staff.
Now my Question is :
One location(45th) have only 10 users and I dont want to put a WLC there.
How can I provide the Guest wireless access on this location over WAN from HQ.
We can buy APs.
Please give me some ideas to solve this problem.
Here I am attaching my default plan :
Thanks

You just configure the access point in FlexConnect mode and then on the guest SSID you would central switch the WLAN. Central switching tunnels back traffic to the WLC and local switching drops traffic off at the local site. Here are some guides to look at.
https://supportforums.cisco.com/docs/DOC-24082
http://www.cisco.com/en/US/products/ps11635/products_tech_note09186a0080b7f141.shtml
Sent from Cisco Technical Support iPhone App

Secured media access over Internet on ix2-dl

I have been very happy with accessing my media off my ix2-dl over LAN with moy mobile devices, and I noticed that the Media Server functionality does allow for remote Internet access to my media. I'm trying to understand whether or not that is secured, i.e. if a username and password is required and if it's going over SSL. In looking at the cloud configuration settings, the language suggests media is wide open to anyone on the Internet, which would be crazy to allow.
So is remote Media Server access possible, secured with login and optionally SSL? My end goal would be to stream my medica to my mobile devices while away from home, using hotel WiFi or my mobile hotspot.

Hello hizpanick
At this time there are no plans to add secured media streams for the intergrated media server feature. That of course is not set in stone. If you would like, you could contact LenovoEMC Support and submit a feature request that would be sent to engineering for consideration.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

WRT54 G2 Router Can't be accessed over internet

Hi ALL
I am trying to access my WRT54 G2 router using IP address assigned by ISP. But i can't access it. Which means I can access it in my officenetwork using http://192.168.1.1 but can't access from out of the network over internet using ip assigned to it by ISP like http://59.10.28.82
Can some one help why? or what setting do i need to change?
Message Edited by VJV on 20-01-2010 02:46 AM

Check this link to enable Remote Management on the router and to manage your router remotely.

WebService access over UDDI

Hello,
we have developed a szenario over SOAP-Adapter in XI (Send) for calling. Now we want use the uddi in the was to call the webservice. What we have to do? Creating a wsdl in configuration of course. But must we deploy something in uddi? What steps are to do to call the webservice direct over uddi?
Thanks in advance,
Frank

There is no dynamic dns in the TC or AEBS.
It depends on your setup, if the TC is the main router in your network, you maybe able to use some dyndns software on a computer in the network, although this seldom works as well as having the software on the router. If you have a different router and the TC is bridged then check that router for dyndns service. And you will need to port forward to the TC.
There are lots of posts about getting external access. You would need to use one of those methods.

No FTP access over WAN with Airport Extreme 802.11n v7.3.2

hi there,
I've read through a few different posts on this topic (both here and in other forums) but I can't seem to find the answers I need.
I have an AEBS n with version 7.3.2 of Airport Utility. attached to the AEBS is a hard drive. I want to enable file sharing (mostly FTP, but AFP would be fine too) to access the drive through the WAN port.
here's what I've done:
- connected a USB drive. This is available through my LAN and is accessible using my OSX account login & password)
- enabled filesharing and "share disks over ethernet WAN port"
- enabled NAT and default host on the AEBS
- configured port mappings for FTP and ARD (I couldn't enable any other file sharing because of a port conflict. Is this because the hard drive connected to the AEBS is already set to use these?)
I created an account with DynDNS to resolve my ip to a domain name.
when I ping either my domain or the IP, I get the same results. it sees my isp but the destination host is unreachable.
port scanning my domain from 20 through 548 shows that 139, 445, and 548 are open. but no 20.
what am I doing wrong here?
thanks in advance

bump

Unusually access over AFP since 10.4.6

Hello,
since we upgraded our clients and our XServe to OS 10.4.6, there is unusually much more access to the shared folder of the XServe. I checked it with fs_usage on the clients and on the server. On the clients you can see, if the shared folder is connected, the Finder is doing much access to this folder (but all applications are closed) and this never stops.
On the server it looks like a permanent scan of the folders over AFP.
The shared folder on the server is an XSAN-Volume and now the performance of AFP goes completely down
Has someone an idea, what the Finder of the clients is doing now and how I can stop this?
Mac OS X (10.4.6)
XServe Mac OS X (10.4.6)

Nice, a .DS_Store file was the reason! I have deleted all .DS_Store files on the shared Volume and now it works fine!
Now, I will disable the .DS_Store files on Networkvolumes. Therefor I found this:
http://forum.onmac.net/archive/index.php/t-334.html
Thanks - Jan
Mac OS X (10.4.6)

No "Wake for network access" over wired LAN

Hello,
I could not get “Wake for network access” to work over wired LAN connection. If I have WiFi enabled as well, or WiFi is the only network interface enabled the “Wake for network access” works fine. However, my Mac Pro is not responding to when I am trying to reach it remotely if only the wired Lan connection is used.
Mac Pro 6-Core 3.33GHz 24GB RAM, latest updates, Snow Leopard, “Wake for network access” enabled in Energy Saver settings.
It seams to me, that it was working some time ago.
Can anyone suggest me places to look to, settings to check, commands to run ..... to get it working?

Thank you Grant Bennet-Alder for responding. I will try to describe it as step-by-step as possible.
- I have back to my mac enabled with screen and file sharing on my Mac Pro
- By default I use wired NIC to connect my MP to network with manual configuration. (I have tried enable DHCP for that interface, however, the result was the same)
If I need to reach files on my Mac Pro (while I am away from it) from my Macbook Pro, I open finder on my MBP where I see my Mac Pro. I click on it if I need to access files or use "Share screen..." button if I want to access MP screen. I have the same result if I try to enter vnc://xxx or afp://xxx
my MBP tries to reach MP and brings the message after some time: Connection failed to "xxxxx" Please make sure the screen sharing is enabled....."
I have no problems remotely accessing my MP if:
     - it is not sleeping (i.e. I ask someone at home to touch its keyboard to wake it up)
     - I have AirPort turned on on my Mac Pro
I could not access my Mac Pro if:
     - it is sleeping and AirPort is off (the only wired NIC is used to connect to LAN)
It does not matter am I trying to get screen/file sharing on local network or via internet - the result is the same - if the only wired connection to network is used and MP sleeps - no access.

Outlook Web Access vs ActiveSync

Hi all,
Apologies if this question was already asked, but I can't seem to find it if so.
I work at a largish company who use Outlook Exchange for our corporate mail. One of the main reasons I got my iPhone 3G is so I read my work mail wherever I am without having to ask for a company Blackberry.
However I may have made a mistake as I didn't realise how worried about security the firm is. I cannot set up ActiveSync for the life of me - it just says wrong password even when it is correct - and this may be because:
1) The firm does not allow IMAP or POP access to Exchange
2) I do not think they have ActiveSync activated on teh server and I cannot change this
However, we do have Outlook Web Access (OWA) which I can access through a normal browser. In fact I can get this working on Safari but I have to enter the username/domain and password every single time which is unworkable. Therefore my question is:
- Can I access work email through iPhone native email client, perhaps by utilising the Outlook Web Access (or finding a way to still use ActiveSync)?
Thanks a lot for any help, I'm tearing my hair out here (in a newbie style of way)!!

Unfortunately not, OWA using some fancy coding that means it will never store your password in your broswer. You have to type it in every time.
Your only choice is to yell and scream at your IT department until they enable ActiveSync.
Please note some key words that may help you achieve this goal:
*Remote Wipe* - This allows, in the event of the phone been stolen, for the phone to be wiped remotely.
*Limited Exposure via Limited Backdated Emails* - This means that if for any reason the person who stole your phone is smart enough to disable all internet access (WiFi, 3G, EDGE, GPRS) BEFORE turning (or the wipe command is issued) on the headset there will be a limited amount of mail in the box... the options are 1 day, 3 days, 1 week, 2 weeks, 1 month (default), no limit.
And finally, *Increased Productivety* - You will be able to increase the produtivity of your working by getting mail on your phone.

Console Access Over IP

Can someone recommend a solution for accessing routers/switches via console port over IP? I've done a search and turned up a couple of options but I wanted to see what recommendations you all might have.
Thanks.

I like baytech (http://www.baytech.net). The reason this works for me is because I can use it to both power the devices and console to them. I can ssh or dial up to the baytech device (supports call back but I don't currently use it) then either access the serial port of a device or flat out power it on and off as if I unplugged it.

Access over ActiveSync

Similar Messages

Maybe you are looking for