Access points not registering with WLC

Hi all,
I have a 5508 WLC in LAG mode and have 14 1231G WAPs connected to it already. However I still have to migrate 9 more WAPs from my old 4404 controller to the new 5508 controller. I cannot get remaining 9 WAPs to register with new WLC. I found following debug message from the WLC. My WLC license is valid for 50 APs. Have any of you guys seen this? What am I doing wrong here? Any lead is much appriciated.
I have LAG setup with 2 ports out of 8 ports. Don't understand why it's giving error of not having enough capacity.
Any advice is much appriciated. Thanks in advance.
*spamApTask4: May 21 18:58:29.468: 00:23:04:c9:72:00 Echo Timer Expiry: Did not receive heartbeat reply from AP 00:23:04:c9:72:00 (10:4:12:26/36602)
*spamApTask0: May 21 18:58:50.588: 00:13:60:7e:28:30 Join Priority Processing status = 0, Incoming Ap's Priority 0, MaxLrads = 50,joined Aps =14
*spamApTask0: May 21 18:58:50.588: 00:13:60:7e:28:30 Refusing Discovery Request from AP 00:13:60:7e:28:30 - no AP manager with available capacity
*spamApTask0: May 21 18:58:50.588: 00:13:60:7e:28:30 Join Priority Processing status = 0, Incoming Ap's Priority 0, MaxLrads = 50,joined Aps =14
*spamApTask0: May 21 18:58:50.588: 00:13:60:7e:28:30 Refusing Discovery Request from AP 00:13:60:7e:28:30 - no AP manager with available capacity
*spamApTask0: May 21 18:59:00.589: Could not find BoardDataPayload
*spamApTask0: May 21 18:59:00.636:
*spamApTask0: May 21 18:59:05.593: Could not find BoardDataPayload
*spamApTask0: May 21 18:59:05.639:
*spamApTask0: May 21 18:59:53.564: 00:13:60:7e:28:30 Join Priority Processing status = 0, Incoming Ap's Priority 0, MaxLrads = 50,joined Aps =14
*spamApTask0: May 21 18:59:53.565: 00:13:60:7e:28:30 Refusing Discovery Request from AP 00:13:60:7e:28:30 - no AP manager with available capacity
*spamApTask0: May 21 18:59:53.565: 00:13:60:7e:28:30 Join Priority Processing status = 0, Incoming Ap's Priority 0, MaxLrads = 50,joined Aps =14
*spamApTask0: May 21 18:59:53.565: 00:13:60:7e:28:30 Refusing Discovery Request from AP 00:13:60:7e:28:30 - no AP manager with available capacity

Guess the SSC got corrupted..
Run the command "debug pm pki enable" on the WLC, copy the SSC and paste it on the WLC and see if that helps.. here is the link to do the same!!
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00806a426c.shtml
Lemme know if this answered ur question and please dont forget to rate the usefull posts!!
Regards
Surendra

Similar Messages

Cisco CAP 3702I not registered with WLC 5508.

I Have WLC 5508 in my network. Now i need to add another 2 no of cisco CAP 3702I in to my network. But we got the following errors
*Mar 1 01:27:06.359: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLC'runn
ing version 7.3.101.0 is rejected.
*Mar 1 01:27:06.359: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar 1 01:27:06.359: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process m
essage type 2 state 2.
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 01:27:25.359: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
LER
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLC'runn
ing version 7.3.101.0 is rejected.
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process m
essage type 2 state 2.
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Failed to handle capwap control messag
e from controller
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap p
acket from 10.56.200.201
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLC'runn
ing version 7.3.101.0 is rejected.
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process m
essage type 2 state 2.
*Mar 1 01:27:06.359: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLC'runn
ing version 7.3.101.0 is rejected.
*Mar 1 01:27:06.359: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar 1 01:27:06.359: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process m
essage type 2 state 2.
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 01:27:25.359: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
LER
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLC'runn
ing version 7.3.101.0 is rejected.
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process m
essage type 2 state 2.
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Failed to handle capwap control messag
e from controller
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap p
acket from 10.56.200.201
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLC'runn
ing version 7.3.101.0 is rejected.
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar 1 01:27:25.363: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process m
essage type 2 state 2.

Your WLC seems to be running version 7.3 which is not supported with 37xx AP platform.
You need to run WLC with version 7.6.100.0 onwards to support these new AP's.
For more details check the Wireless Software Compatibility Matrix.
-Thanks
Vinod
**Encourage Contributors. RATE Them.**

APs not registering with WLC

Hi guys, i'll try to explain our trouble as best as i can:
Im trying to do some basic scenario here. Picture this: One L3 Switch connecting a 4402 Controller, 3 Administrative Vlans for APs (63, 93 and 127) and 3 Vlans for clients (one for each Administrative vlan, 16, 64 and 95 respectively). Also, in one of the administrative vlans (63) lives the Management and AP Manager interfaces of the controller. The L3 Switch does the DHCP business also, including giving the Controller IP (option 43).
Here is the deal: When i try to connect one LWAP AP in to the same VLAN as the controller (63) it does gets an IP address of the segment and also gets the Controller IP. BUT, it cannot reach the Controller Management interface, not by ping nor by registering. (i connected a laptop to chek this behavior and it cant ping the Management Interface either)
Then, if i connect the same AP to another VLAN (say.. 93)it will get an IP address of the segment, IP of the controller and it will reach the Controller by means of PING and also discovery request/discovery response. BUT, it wont register with the controller. In both cases, the L3 switch can ping just fine the APs and the Management Interface.
After sniffing little bit I can see that the AP does in fact send the Join request message to the AP Manager interface of the Controller, but it wont get an answer. Then, in the CLI of the Controller (debug lwapp events enable) i can see that the controller does recive the discovery request and send the discovery response messages, but never sees the join request frome the AP.
Configs of the switch and controller attached.
Also, i checked the date of the controller and its up to date, the certificates of the APs should be fine, they will expire in 2 o 3 more years.
Oh, and the Controller its not directly connected to the Switch, its connected to another 3500 switch using a GBIC, but its just used as a media converter... after that switch its connected to a trunk in the L3 Switch.. and yes, the Switch with the controller has all the needed vlans configured so they can be seen on the trunks.
Any help would be greately appretiated.

Hi again... guess what? I came to work today, turned on all the equipment.. and it works! God knows why but now the APs can register. For your information I did reset the devices before, so i dont know what happened.
Anyway there is still a problem. If the APs are in the same VLAN as the controller, they cant see it. And this goes for every device, if I have 2 APs and one laptop in the same vlan they cant ping each other but can ping their GW. Any comments on this?
Thanks in advance!

Access Point not connecting with 1G ethernet

HI everyone.
I just noticed this. I have different series of AP , 1142 , 1252 , 3500 , 3700. it is happening on any series. if I set the duplex and speed to Auto some of my AP are connecting with 100mb not 1Gps.
if I set duplex to full and speed to 1000 then the AP shows not connected on the switch and the AP it self is blinking like a Christmas tree!
I have different series I switches as well and it happening on all of them. they are Gig
this is the 3850 series out put of the interface
description Class7.1A
switchport access vlan 10
switchport mode access
spanning-tree portfast
end
speed and duplex is auto and it is connected with 100mb!
any comment appreciated

Hi my friend Manannalage
the switch ios is 03.03.00.SE
i have other APs (same series) running on 1G on the same switch
here is the proof :)
can it be the cable quality dropping from 1000 to 100? I'm going to un-mount the AP from the wall and connect it directly to the switch to see what will happen
Gi1/0/23 connected trunk a-full a-1000 10/100/1000Ba
seTX
Gi1/0/24 connected trunk a-full a-1000 10/100/1000Ba
seTX
Gi2/0/1 Class8.1B connected 10 a-full a-1000 10/100/1000Ba
seTX
Gi2/0/3 AP connected 10 a-full a-1000 10/100/1000Ba
seTX
Gi2/0/10 Class8.1A connected 10 a-full a-1000 10/100/1000Ba
seTX
Gi2/0/11 Class8.3 connected 10 a-full a-1000 10/100/1000Ba
seTX
Gi2/0/12 AP connected 10 a-full a-1000 10/100/1000Ba
seTX
Gi2/0/15 Class8.2 connected 10 a-full a-1000 10/100/1000Ba
seTX
Gi2/0/16 AP connected 10 a-full a-1000 10/100/1000Ba
seTX
Gi2/0/18 AP connected 10 a-full a-1000 10/100/1000Ba
seTX
Gi2/0/21 AP connected 10 a-full a-1000 10/100/1000Ba
seTX
Gi2/0/22 AP connected 10 a-full a-1000 10/100/1000Ba
seTX
Gi2/0/23 connected trunk a-full a-1000 10/100/1000Ba
seTX
Gi2/0/24 connected trunk a-full a-1000 10/100/1000Ba
By the way , now I have a nightmare every night because of you :) im like oh you are not updating your website any more :) thanks for the us full stuff you post there.

HT4907 I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air

I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air and I can use Mini to input data or interact with screens of those computers.

Regarding your first question about bookmarks, I think you discovered the answer in when you pressed the address bar. The second tab there has your bookmarks.
As for the keyboard, I'm not sure why your Firefox is reacting so slowly; mine seems to show keyboards even when I don't want them. If you have accumulated a lot of history, perhaps that's an issue?
Did you use any third party software to move your Firefox data from internal memory to the storage card?

MBP will not register with iCloud servers (and most iCloud features + Handoff and Continuity do not work)

Hi all,
I have an extremely strange issue on my rMBP which has not been solved yet despite over 2 hours on the phone with Apple support, and another hour after being put through to a Senior Advisor, and several online chats.
I have a Apple Certified Refurbished Late 2013 Retina Macbook Pro, which has a 2.3Ghz i7, 16GB of RAM, 500 Flash Storage and the NVIDIA discrete graphics. It was purchased in December 2014 on the Apple Store. It is running 10.10.2.
For some reason, my computer WILL NOT register with iCloud. Messages and Facetime both would not work, my iPhone 4S which is capable of text message forwarding would not recognise it and allow me to turn it on. Handoff, Continuity and Instant Hotspot - basically any of the features to do with iCloud or connecting to another device - do not work.
Originally I believed it was just an issue with Messages and Facetime so I reinstalled the OS back to 10.10.1, but that did not solve the problem. All my Messages contacts kept on coming back as 'not registered with iMessage' and I could not turn on SMS Relay either.
I contacted Apple on Wednesday night and ended up talking to several different people, the Senior Advisor was the most helpful - really tried to help me figure out what was wrong, and to fix it - wonderful help, really was. They used screen sharing and were quite confused. They figured out as well that Handoff, Instant Hotspot, and all those other features don't work either. At this point, they made me update to 10.10.2 to see if it was an issue with the update, but to no avail.
Eventually, the SA checked my iCloud account and saw that the computer hadn't even connected to iCloud, and wasn't even showing up as one of my devices, despite the fact that I had signed into iCloud on this computer.
The SA told me that he suspected it must have been something to do with hardware, but didn't know what it could be. He said the only time he had seen this before was on a refurbished laptop when the serial number hadn't been put back on, but my serial number was there, so he said it must have been something to do with Bluetooth or Wifi.
Wireless seems to work completely fine, but there is a strange thing with Bluetooth in which within System report says that the computer is not discoverable or connectable, despite the fact that in the Menu Bar it says it is on and discoverable. It becomes discoverable and connectable once you toggle the switch in System Preferences.
I was planning to book a Genius Bar Appointment as suggested by the SA, but something strange happened today - all of a sudden, some (not all of them) of my iMessages from earlier today came through. Still no working Handoff or Facetime or Continuity, but now I am starting to wonder what is really wrong.
Despite the fact they said it was hardware (especially Bluetooth), what could explain why it (seldom) or will not register with iCloud? Can anybody shed some light on the situation and whether a Genius Bar appointment could help fix it?
Cheers and thanks in advance.

Needed to add some clarification here:
iCloud shows me as signed in, but Calendars are NOT checked
Internet Accounts shows Calendars as syncing

SMS in Yosemite messages not working. "Not registered with iMessage"

Just updated today to Yosemite. Macbook Pro 2013 (current retail model) with upgraded RAM and flash storage. iPhone 6 running 8.0.2 with recent back up to iCloud.
When sending iMessages to my normal iMessage contacts, everything is ok. This update should also allow for continuity with SMS, that they show up as Messages in the same application. I cannot get any messages which are not iMessages to send out. Each time I attempt this, I get the error "User is not registered with iMessage." Which, yes, duh. That's the point. I've sent and received SMS messages on my phone with out error, but still have not been able to initiate or respond on my Mac with Messages. My contact card only has the same phone number which is registered to the same iCloud account for both the phone and the Mac.
I've restarted the phone and logged in and out of iMessage in hopes of a refresh. I'm out of ideas as to how to get them to sync up, or whatever it is they need to do.
Is there a step that I am missing? It should, in theory, just work, but I can't find any messages on this. Any guesses?
Thanks!

Hi,
It seems that some people are experiencing issues with Logging in fully to the iMessages Servers from their Mac.
There is one Error Messages that is seen that is known to be very similar.
This Error can only be fixed by Contacting Support.
What is does prove though is the The Apple ID in use can be rejected on a Device by device basis, i.e. it will work on a iOS device or even another Mac but not on one particular one.
Sometimes deleting the Keychain item for the iMessages Login can help (then Restarting the app)
It is called IDS: yourApple ID- Auth Token
If deleting this does not work try repairing the Keychain.
After that I would contact Apple Support. You may have to speak to a Level 2 person as Level 1 people try to fit everyone into Software or hardware issues and charge for Out of time Apple Care.
Fixing and Apple ID/Account is free.
7:22 pm Tuesday; January 13, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Installed ES - Error when loading adminui: Property Editor not registered with the PropertyEditorManager

I just installed LiveCycle ES on a Windows 2003 virtual machine using the WebSphere application server.
Everything is finally installed, but now when I try to access the adminui url (http://xxxxx:9080/adminui/login.faces) I receive the following exception:
Error 500: com.ibm.ws.jsp.JspCoreException: Unable to convert string 'adminUIResources' to class javax.el.ValueExpression for attribute basename: java.lang.IllegalArgumentException: Property Editor not registered with the PropertyEditorManager
Am I missing something? What now?

You shouldn't have any appserver specific libraries in WEB-INF/lib (covered by the webapp's default classpath). Further on the appserver/lib (covered by the appserver's default classpath) should only contain appserver specific libraries and at highest 3rd party libraries which are going to be shared among all webapps. Finally you should NOT have added or modified anything in the jdk/lib (covered by the runtime's default classpath).
So in case of a default and unmodified environment everything should just work flawlessly. In your specific case it seems that you've unnecessarily added/copied appserver specific libraries in the WEB-INF/lib or that you have duplicated EL libraries from (another) appserver in the appserver/lib or maybe -more worse- in the jdk/lib.

Getting "The server {85DE1C45-2C66-101B-B02E-04021C009402} did not register with DCOM within the required timeout." on WinXP machine

Hi,
I have a windows service written in .Net which access a COM component(This conponent is also written by me).
The COM component launches Acrobat and uses it for generating Thumbnail files.
I get following error is logged into event viewer when CreateDispatch("AcroExch.App", &e)) line is exicuted.
Error Message: The server {85DE1C45-2C66-101B-B02E-04021C009402} did not register with DCOM within the required timeout.
This problem occurs only when the windows service run under a specified user account say "TestUser". i.e if service runs under "Local System" account then everything works fine.
Also this problem only occurs on WinXP machine. i.e same thing on Windows2003 server works fine.
I have given all required permissions for "TestUser" on AcroExch.AVDoc and AcroExch.PDBookmark using dcomcnfg.
Any help will be appriciated.
Thanks and Regards,
Anand Mahadik.

Hello,
start by running sfc /scannow to check if there is corrupt system files.
If this does not hellp, I recommend performing an in -place upgrade of your OS.
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft Certified
Professional
Microsoft Certified
Systems Administrator: Security
Microsoft Certified
Systems Engineer: Security
Microsoft Certified
Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft Certified
Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft Certified
Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft Certified
Technology Specialist: Windows 7, Configuring
Microsoft Certified
IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator

CSA Agent not registering with CSA MC

I have downloaded and installed my agent kit on a WinXP machine. But for some reason it is not registering with the CSA MC. Any idea why? The CSAMC is in a different subnet, but 443 is open for communication. Does the MC need other ports open to talk to the agent?
Thanks,
nate

Here is a listing of the various error codes that CSA (used to be Okena) prints when there is a communication issue between an agent and the MC.. Usually the issue is either licensing or CSAMC access restrictions, but this list has all of the causes. Please rate if this helps.
OKENA_STATUS_INVALID_SYSTEM_CONFIGURATION = 2000,
OKENA_STATUS_ICC_FAILED_GET_HANDLE = 2001,
OKENA_STATUS_ICC_FAILED_TO_WRITE = 2002,
OKENA_STATUS_ICC_FAILED_TO_READ = 2003,
OKENA_STATUS_ICC_INVALID_TOPOLOGY = 2004,
OKENA_STATUS_ICC_INVALID_INITIATOR_COMP = 2005,
OKENA_STATUS_ICC_INVALID_PAYLOAD_SIZE = 2006,
OKENA_STATUS_ICC_INVALID_VERSION = 2007,
OKENA_STATUS_ICC_INVALID_COMP_ID = 2008,
OKENA_STATUS_ICC_INVALID_PAYLOAD = 2009,
OKENA_STATUS_GROUP_DOES_NOT_EXIST = 2010,
OKENA_STATUS_INVALID_REGISTRATION_PARAMS = 2011,
OKENA_STATUS_HOST_HAS_REGISTERED_BEFORE = 2012,
OKENA_STATUS_INVALID_CONTACT_INFO = 2013,
OKENA_STATUS_HOST_NOT_REGISTERED = 2014,
OKENA_STATUS_MISSING_CONTACT_INFO_PARAMS = 2015,
OKENA_STATUS_INVALID_REGISTRATION_ID = 2016,
OKENA_STATUS_ICC_INVALID_BYTE_ORDER = 2017,
OKENA_STATUS_ICC_NOT_INITIALIZED = 2018,
OKENA_STATUS_COMP_CONFIGURED = 2019,
OKENA_STATUS_UNDEFINED_MGMT_SERVER = 2020,
OKENA_STATUS_HTTP_TRANSACTION_FAILED = 2021,
OKENA_STATUS_ICC_INVALID_HANDLE = 2022,
OKENA_STATUS_SERVER_IS_REACHABLE = 2023,
OKENA_STATUS_HTTP_TIMEOUT = 2024,
OKENA_STATUS_ICC_NO_CONNECT_MUTEX = 2025,
OKENA_STATUS_FORCE_POLLING_NOW = 2026,
OKENA_STATUS_REGISTRATION_REJECTED = 2027,
OKENA_STATUS_LOAD_CONFIG = 2028,
OKENA_STATUS_DB_ERROR = 2029,
OKENA_STATUS_LICENSE_REACHED_LIMIT = 2030,
OKENA_STATUS_REGISTRATION_NOT_ALLOWED = 2031,
OKENA_STATUS_NOT_ALLOWED_TO_STOP_AGENT = 2032,
OKENA_STATUS_CLIENT_UI_NOT_ALLOWED = 2033,
OKENA_STATUS_FAILED_TO_PRINT_AGENT_REPLY = 2034,
OKENA_STATUS_INVALID_LICENSE = 2035,
OKENA_STATUS_TIMED_OUT = 2036,
OKENA_STATUS_REGISTRATION_BACKOFF = 2037,
OKENA_STATUS_TESTMODE_ON = 2038,
OKENA_STATUS_TESTMODE_OFF = 2039,
OKENA_STATUS_INVALID_SERVER_FQDNS = 2040,
OKENA_STATUS_INVALID_SERVER_IPADDR = 2041,
OKENA_STATUS_SERVER_DNS_NOT_RESOLVABLE = 2042,
OKENA_STATUS_SERVER_IPADDR_NOT_OWN = 2043,
OKENA_STATUS_SERVER_DNS_NOT_OWN = 2044,
OKENA_STATUS_SERVER_NAME_NOT_FQDNS = 2045,
OKENA_STATUS_FAILED_OPEN_PROCESS = 2046,

I am using a GLOBE prepaid microsim for my new ipad with retina. i was registered with supersurf 999, and i was able to enjoy my internet connection until i updated my ios with 6.1... every time i go online,it says i am not registered with mobile intrnet?

i am using a GLOBE prepaid microsim for my new ipad with retina. i was registered with supersurf 999, and i was able to enjoy my internet connection until i updated my ios with 6.1... since then, every time i go online,it says i am not registered with mobile internet... however, when i insert the microsim on my broadband, i can actually go online... what to do??? my apn setting in internet.globe.com.ph which is for prepaid users...

PS - I just sent this to a few of my friends in the big hardware review sites, as well as a few apple execs:
Whats up guys? Its your old buddy dom "battleship mtron author , 9 ssd drives in raid 0" years ago. lol
I wanted to fill you in on a HUGE problem with the new ios 6 update.
My iphone 4 updated without a hitch.
My ipad 3 on the other hand has a HUGE PROBLEM. It is essentially a brick without wifi (since the device relies on wifi for just about every task).
There are currently hundreds of a users within the last 2 hours reporting the same error on the apple discussions site.
https://discussions.apple.com/message/19626235#19626235
What happens is simple:
1. Download and install the update on Ipad 3.
2. Try and connect to your normal wifi connection.
3. It will connect for a few seconds and than fail stating "no internet connection available"
4. It is no a brick without wifi accessibility. (unless we revert to ios 5)
I have tried resetting my router. Resetting settings on the ipad. Renewing the ip address both LOCALLY and through the WAN at the cable modem and rebooting all of my networking equipment (ie: router), I even tried doing a complete wipe and re-install of ios 6 fresh. You guys know I am a tech geek from my background and I have tried everything so I just wanted to fill you in on this potential problem for apple.
Regards,
Dominick
Owner, nextlevelhardware.com (retired)

Mavericks Messages problem sending message: "not registered with iMessage"

I'm on MacBook Air(MBA) and recently installed Mavericks. I try sending a message from MBA MESSAGES to a person's cell phone number (they have an android phone). Their name appears in red and I get: "...is not registered with iMessage." So I was trying to read discussions in here and allot of them say Messages won't work unless a person has an Apple device- iphone, Mac, etc. I want to know if that is true or if there is any other way to send from the MBA a message to them? I also tried from Messages on MBA to their gmail address, which they use on their android cell phone, and get same error.
Is there anyway a non-apple person can "register with iMessage" if they have an android phone?
I know I can email them, but I wanted a fast way for emergency purposes to get a MESSAGE to them from my MBA. Sometimes they can't talk on phone at some times, but are allowed to get instant message for emergency where they work.

Hi,
You have to have otr get an AIM or AIM valid name.
AIM stands for Aol Instant Messenger.
Apple IDs issued by Apple (Those ending in @mac.com or iCloud issued @me.com and @icloud.com) are valid as AIM Screen Names if the password is kept to 16 characters or less. (this is an AIM server limit)
Apple made an Agreement with AOL over the use of names over 10 years ago.
The Original .Mac ID (@mac.com) could be paid for or could be Trial Accounts.
Trial Accounts continued to work after the trial ran out. (i.e. the email stopped but the AIM Screen Name didn't).
The same was true of lapsed accounts.
When MobileMe started people could link, email-wise, their paid for .Mac accounts to the paid for MobileMe (@me.com) accounts.
Any @mac.com still works over the AIM service.
Now also @Me.com names worked - meaning some people had two valid AIM names - they are not liked for use with AIM just that the passwords will be the same.
With the end of MobileMe all those @me.com account died as far as AIM is concerned.
However you could link it to iCloud which effectively moved it to the iCloud server.
(i.e. they are iCloud issued @me.com ID instead of MobileMe ones)
Then Apple started to issue @icloud.com IDs
This could mean that some people have three working IDs for use with AIM (but all linked to one email Account at Apple).
NOTES
From Lion onwards (iChat 6 and Above) Apple have had the app also login in to Apple before it will allow the AIM Servers to "read" the password.
This applies to any iCloud issued ID - the "newer" iCloud linked @Me.com and @iCloud.com IDs
This means you cannot use those IDs in iChat 5 or earlier as those version only do an one point login only.
With the coming of iCloud other Apple IDs could be linked to iCloud which may have given you either @me.com and later an @iCloud.com ID as well or just an @icloud one if you were later to the party as it were.
Whilst in some cases this does give you two valid AIM Screen Name the originating Apple ID does not become one.
9:04 pm Saturday; February 8, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Access Points not overwritten when restoring a bac...

Hi people,
Seems like the new and still buggy firmware of the E70 has another problem.
Before restoring a backup, if you do not remove the Access Point definitions (only operator Access Points, not Wi-Fi or others), the restore does not overwrite the definitions and makes new copies of the Access Points.
That would be OK if we could remove the extra Access Points but we cannot. When you delete one of the copies, it seems like it is removed but its definition is still somewhere on the phone, so while "Connection Settings" program cannot see it, all programs that use Access Points can see it (but cannot use it because it is a stale record).
Does anyone know where this info is stored so, if I forget to remove them before restoring a backup, I can remove them afterwards?
Kerem Erkan
IT Professional
E70 (2.0618.07.10 - 31.08.06 RM-10)

Welcome to the many problems of the LAPAC1750. I finally gave up and went with Ubnt. Uptime is at 75 days now and would've been longer if not for a firmware update.
The LAPAC had good range and worked well when it worked, but it's unstable to be marketed right now. Hopefully Linksys issues a firmware update to fix everything.

11gR2 Install Error, Listener is not up or database service is not registered with it

Hi all,
I'm currently studying towards my OCA, I've passed 1z0-051 (SQL Fundementals I), and now I'm moving onto 1z0-052 (Admin 1).
Im really having trouble creating a database in Oracle 11g R2 Enterprise Edition. I install the software no problem. Then I create a database, and during the creation I have to createsa listener which uses TCP (default port:1521) and IPC. whilst creating the database I get the following error
'Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM configuration Assistant again.'
Now, before you lynch me, I have searched this forum for answer to this for a day and a half. I've also tried google, i just can't find a answer that sorts out my problem. please assist me.
I'm running on Windows 7 Professional (32bit) (I have previously tried on the 64 bit version with teh same results).
Here's teh contents of my listener.ora file:
# listener.ora Network Configuration File: C:\app\Damien\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\app\Damien\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\app\Damien\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = ipc))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.4)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
ADR_BASE_LISTENER = C:\app\Damien
Here's the contents of my tsnames.ora:
# tnsnames.ora Network Configuration File: C:\app\Damien\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Here is the last fe lines of my emConfig.log:
Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: C:\app\Damien\product\11.2.0\dbhome_1, and user: SYSMAN
Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1655)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1903)
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3230)
at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
at java.lang.Thread.run(Thread.java:595)
Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
Refer to the log file at C:\app\Damien\cfgtoollogs\dbca\orcl\emConfig.log for more details.
Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)
at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
at java.lang.Thread.run(Thread.java:595)
Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to C:\app\Damien\product\11.2.0\dbhome_1\oui
My Listner status output is here:
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 18-JAN-2014 10:14:39
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=ipc)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
Start Date                18-JAN-2014 09:27:34
Uptime                    0 days 0 hr. 47 min. 6 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\app\Damien\product\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File         c:\app\damien\diag\tnslsnr\LONDON\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\ipcipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.4)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
I can login as sys into my database through sqlplus, so it seems the database is up and running, it just seems to be a listener problem maybe??
Many thanks for any assistance that you give. I'm learning so be gentle...
Damien

SOLVED!
OK all solved now, thanks to the link to Ed Stevens website that Baris posted (mucho respect )
Seems that like Barus said I was not using Dynamic Registration, which means that I would need to manua
ly update the listerner.ora file. On top of that it seems that for some my tnsnames.ora wasn't resolving mt database name so the tnsping wasfailing.
What I did to solve the name resolution problem
1. Opened the
Network Configuration Assistant and saw that my listener didnt have my DB registered with it. So I added it. What this horrible GUI tool does is update the tnsnames and listener.ora files for you. So once that was done I went to the command prompt and did ;'tnsping <dn name> and hey presto it was getting a nice response.
Then I re-ran my DB Configuration Assistant and tried to reconfigure my database. However it aing failed and gave me the same message that I was originally getting about the DB Service not being registered etc..the lister status still said that same thing:
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
the 'unknown' means that the DB didnt tell the listener that it was there but instead the listener is in manual mode and will just use the configuration in the listener.ora to know where the DB is.
So then I followed the steps on the ED Stevens website (follow the link). He has steps which show how to enable Dynanmic registration so that your DB regusters itself with the listener. In a nutshell, he states that he listener actually doesnt need the listerner.ora if using dynamic registration. I shutdown the DB, stopped the listener then I renamed the lsitener.ora to listerner.old, then started the lietener and checked the status and it said 'the listener supports no service' I then started the DB and, then resched teh listener status, it then read 'status: READY'... hooray!, the DB had dynamically registered itself with the listener. I then was able to successfully start up and run Enterprise Manager.
Thanks for all your help Baris, and Ed Steven website.
I know more now than when I started so I'm happy.
Thanks.

Help. Trying use imessage and keep getting an error message that says the person is not registered with imessage

I am trying to use imessage and everyone I am trying to send to I keep getting a message that they are not registered with imessage. They all have iphones and I know for a fact they are all registered. I have tried all the trouble shooting steps I have found so far. I made sure my imessage is turned on and set under my apple id and email, I'm connected to wifi. etc... I can use facetime but can not message anyone. Thanks in advance for you help

Hi, reagans3.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues with iMessage. I am not sure what troubleshooting steps that you have processed; however, there are some additional steps in the article below that may help.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Cheers,
Jason H.

Access points not registering with WLC

Similar Messages

Maybe you are looking for