Access Policy is not getting trigggered after creation of user through GTC

Hi,
I have an access policy for ALL USER role and that provision users to an RO after getting created in oim. I have a trusted source flat file reconciliation GTC for user creation. I am facing issue when user is getting created through GTC, access policy is not getting triggered. But while creating an user through web console the same access policy is working fine and user is getting provisioned with RO.
If anybody have any idea how to resolve this, please help me in this regards.
Regards,
Avijit

Hi ,
its good to know that its working. As per my experience it works for once (through reconciliation) but then stops working. Now to confirm try to revoke the user by changing the group member-ship through reconciliation and see if the resource is revoked or not (repeat it for 2 -3 times). Note that don't do it form within IDM web admin console, do it through reconciliation.
do post your results.......
Regards.

Similar Messages

  • Screen fields not getting displayed after Line 16

    Hi All,
    There is a screen exit created in IW51, now the new requirment is to add 3 more fields.  I added the fields below the exiting fields, in line number 15 , 16 &17. After executing the Tcode I could find that the field created in line 17 is not getting displayed in runtime. I have increased the screen length. The fields if moved to line numbers below 16 then they are getting displayed. Can anyone help me to find why it is not getting displayed after line 16.

    Hi,
    Can you give me the Enhancement name?
    I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode?

  • Production Reporting out put not getting deleted after 30mins what we set.

    Hi,
    This issue regarding Production Reporting. In the workspace the report output not getting deleted after 30minutes (while publishing the report settings were like delete after 30 mins). Any suggestions please .....
    Thanks
    Venkat

    Hi Deepak,
    Please chek the field / value which u have changed is relavant to  printouts of the change.
    You can check  with following path
    SPRO> MM > Purchasing > Message > Fields Relevant to Printouts of Changes.
    Confirm tick is provided for PO ( P)
    Vivek

  • "disp+work" process in not getting started after kernel upgradation

    Hello Experts,
    Good day…..,
    I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
    I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
    I have posted “dev_W0” log &
    “disp+work” command result obtained in CMD prompt of respective server.
    Please help me out in this. Thanks all in advance.
    “dev_w0” Log”
    trc file: "dev_w0", trc level: 1, release: "741"
    *  ACTIVE TRACE LEVEL           1
    *  ACTIVE TRACE COMPONENTS      all, MJ
    M sysno      55
    M sid        TNG
    M systemid   562 (PC with Windows NT)
    M relno      7410
    M patchlevel 0
    M patchno    42
    M intno      20020600
    M make multithreaded, Unicode, 64 bit, optimized
    M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
    M pid        2392
    M
    M 
    M Wed Jul 23 02:04:35 2014
    M  kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
    M  length of sys_adm_ext is 500 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
    M  DpCommonParamInit: rdisp/core_file_size = default --> no change
    I  MtxInit: 30000 0 0
    M 
    M Wed Jul 23 02:04:36 2014
    M  DpIPCInit2: read dp-profile-values from sys_adm_ext
    M  DpShMCreate: alloate/attach shared memory (mode=ATTACH)
    M  DpShMCreate: sizeof(wp_adm)                         24288    (1104)
    M  DpShMCreate: sizeof(tm_adm)                          51472080             (256080)
    M  DpShMCreate: sizeof(ca_adm)                           432000  (72)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
    M  DpShMCreate: sizeof(comm_adm)                   7583152                (14904)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)                      0              (296)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)                         0              (80)
    M  DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
    M  DpShMCreate: sizeof(sock_adm)                       520080  (1016)
    M  DpShMCreate: sizeof(vmc_adm)                       0              (3208)
    M  DpShMCreate: sizeof(wall_adm)                        (ft=41664/fi=67472/hd=64/rec=192)
    M  DpShMCreate: sizeof(amc_rec_adm)                              (ft=86464/fi=67472/hd=64/rec=416)
    M  DpShMCreate: sizeof(websocket_adm)                         (ft=28864/hd=64/rec=272)
    M  DpShMCreate: sizeof(gw_adm)          64
    M  DpShMCreate: sizeof(j2ee_adm)       3936
    M  DpShMCreate: SHM_DP_ADM_KEY                  (addr: 00000000103D0050, size: 60433936
    M  DpShMCreate: allocated sys_adm at 00000000103D0250
    M  DpShMCreate: allocated wp_adm_list at 00000000103E20F0
    M  DpShMCreate: allocated wp_adm at 00000000103E2410
    M  DpShMCreate: allocated tm_adm_list at 00000000103E84F0
    M  DpShMCreate: allocated tm_adm at 00000000103E8730
    M  DpShMCreate: allocated ca_adm at 00000000134FF000
    M  DpShMCreate: allocated comm_adm at 0000000013568980
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: allocated sock_adm at  0000000013CA4130
    M  DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
    M  DpShMCreate: system runs without VMC
    M  DpShMCreate: allocated gw_adm at 0000000013D23560
    M  DpShMCreate: allocated j2ee_adm at 0000000013D237A0
    M  DpShMCreate: allocated ca_info at 0000000013D24900
    M  DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
    M  DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
    M  DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
    M  DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
    M  DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
    M  DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
    M  DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
    M  DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
    M  DpShMCreate: initialized 21 eyes
    M  DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
    M  DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  <ES> EsILock: use Semphore 33 for locking
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    X 
    X Wed Jul 23 02:04:37 2014
    X  mm.dump: set maximum dump mem to 96 MB
    M  ThStart: taskhandler started
    M  ThInit: initializing DIA work process W0
    M 
    M Wed Jul 23 02:04:44 2014
    M  ThInit: running on host ABTHMSSB01
    I  MtxInit: 0 0 0
    M 
    M Wed Jul 23 02:04:45 2014
    M  calling db_connect ...
    B  Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
    B  Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
    B  Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
    C  Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
    C  Register application info.
    C 
    C Wed Jul 23 02:04:47 2014
    C  Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
    C  Detailed Oracle client (patch) info not available.
    C  *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
    [dbsloci.c    2406]
    C     Only Secure Connect method possible.
    M  ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c   2281]
    M Wed Jul 23 02:04:48 2014
    M 
    M  Info for wp 0
    M 
    M    pid = 2392
    M    severity = 0
    M    status = 0
    M    stat = WP_NEW
    M    waiting_for = NO_WAITING
    M    workerType = DP_WORKER_DIAWP
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M mode_cleaned_counter = 0
    M    control_flag = 0
    M    report = > <
    M    action = 0
    M    tab_name = >                              <
    M 
    M  ThIErrHandle: no current incoming request
    M 
    M 
    M *****************************************************************************
    M  *
    M  *  LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
    M  *  ERROR ThInit: db_connect
    M  *
    M  *  TIME Wed Jul 23 02:04:48 2014
    M  *  RELEASE 741
    M  *  COMPONENT Taskhandler
    M  *  VERSION 1
    M  *  RC 16797709
    M  *  MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
    M  *  LINE 2470
    M  *  COUNTER 1
    M  *
    M  *****************************************************************************
    M 
    M  PfRejectStatistic: clear statistic record
    M  PfClearAllRec: clear statistic area
    M  PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hooks for event BEFORE_DUMP
    M  ThIErrHandle: entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
    “Desp+Work” Command result:
    C:\Users\tngadm>disp+work
    disp+work information
    kernel release 741
    kernel make variant 741_REL
    compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
    compiled for                  64 BIT
    compilation mode UNICODE
    compile time Jul  9 2014 16:39:46
    update level 0
    patch number 42
    source id 0.042
    RKS compatibility level 0
    supported environment
    database (SAP, table SVERS) 700
    710
    701
    702
    703
                                  711
    720
    730
    731
    732
    738
    740
    operating system
    Windows NT 5.1
    Windows NT 5.2
    Windows NT 6.0
    Windows NT 6.1
    Windows NT 6.2
    Windows NT 6.3
    C:\Users\tng

    C  *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
    [dbsloci.c    2406]
    C     Only Secure Connect method possible.
    For this issue you need to set up SSFS.
    1639578 - SSFS as password storage for primary database connect
    I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
    I have upgraded kernel version from 701 to 741
    Are you sure kernel 741 is compatible with an EHP 4 system ?
    Read this SAP note
    1969546 - Release Roadmap Kernel 740
    Regards
    RB

  • Dynamic access policy ACL not beeing applied to user

    Hi all
    I have just configured my ASA for ssl vpn
    I have created a dynamic access policy with an ACL in it.
    The user connects fine, and I can see on the logs that the DAP policy has applied to the user
    However when I click on monitoring, it says no acl is applied to this session, and the client cannot get anywhere
    why would this be?
    cheers
    Carl

    When you go to dynamic access policies in ASDM is your NoVPN ACL at the top of the list (highest ACL priority)?  These get processed in order and if your user is in both groups the first will be taken and the rest ignored.
    Also, is your default policy at that bottom of this list deny access?

  • Can not get email after updating to 8.1.1! Deleted account and now cannot add as will not verify due to Apple something timeout messages? Any one else having problems?

    Can not get email after updating to 8.1.1! Deleted account and now cannot add as will not verify due to Apple something timeout messages? Any one else having problems?

    Hi tania184,
    Have you contacted your email provider to make sure there are no problems on their end? If they say their email servers are working properly, check the outgoing and incoming mail servers entries on your iPhone to make sure both are entered correctly. Enter the outgoing mail server even if the account setup indicates that is optional.

  • My ipod touch is not getting recognised after the update in my itunes library. the library is updated. and it shows the connect to itunes sign.

    my ipod touch is not getting recognised after the update in my itunes library. i have updated my library as well. but it shows the connect to itunes sign on my ipod.

    If it happened after updating iTunes on the computer see:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    If after updating the iOS on your iPod:
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Ipod Touch not getting detected after IOS upgrade.

    I have recently upgraded the firmware of my Ipod Touch (1G) to IOS 3.0.1 and was successful in upgrading.
    The issue i am facing is that my ipod touch is not getting detected after reconnecting and the ipod touch is not getting switched on...it is just showing the apple symbol and the progress bar.
    Please let me know if anyone has faced similar type of issue.
    Please also let me know the resolution for this.

    Are you using a USB hub? Try connecting the iphone directly to the computer's USB port and see if that makes a difference.
    Also, with the upgrade, this seems to happen a lot. Most of the time if it is not the USB issue above, it can be resolved by simply redownloading Itunes and installing it on top of your current installation.

  • Can not get microphone after privacy on ipad 2 on ios 7, Can not get microphone after privacy on ipad 2 on ios 7

    Can not get microphone after privacy on ipad 2 on upgrade iOS 702 . What can i doe ? Thans

    The above helped me find this solution:
    do the following steps:
    General > Restrictions > [scroll down to ] PRIVACY: > Microphone > Allow changes
    Not: Settings > Privacy > Microphone
    If you are installing an app like Soundhound, you will have to delete it then just reinstall it. The app then will ask you if it is "OK" to use the microphone. Push "yes". Then go back to the Settings app and follow the chain:
    Settings > Privacy > Microphone > SoundHound   push tab to the right until it turns green and you are set.

  • After entering "Country or Region" United States, I do not get a next button to advance through the process.  What might be the cause?

    After entering "Country or Region" United States, I do not get a next button to advance through the process.  What might be the cause?

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Macbook pro storage do not get smaller after cleaning up photos in new photos app

    Macbook pro storage do not get smaller after cleaning up photos in new photos app.
    How can I delete photos? are they hidden somwhere?

    Yes, trash is empty. And in photos libary I only have 1800 items. Also I havent got so much movies.

  • Reports not getting posted after webserver bounce.

    Hi Gurus,
    The reports are not getting posted after the webserver bounce occurred. This is the same webserver on which report repository is located.
    However if we boot this webserver first and run a report, then it gets posted. And then after all the other webservers are booted, then the issue does not occur.
    Please advise.
    Thanks

    Sounds a bit like the problem described in this Oracle Solution: ID 660253.1?
    https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PROBLEM&id=660253.1

  • I can not get my iPod touch to play through my USB port

    I can not get my iPod touch to play through my USB port on my motorcycle stereo amp but a regular iPod works any suggestions on what's wrong or does any one know what Stereo amp for motorcycle will work

    Contact the manufacturer of the motocycle system.  Many systems are not compatible with iOS devices but work fine for the simple iPods.

  • How to execute BAPIs by getting the input from the user through the browser

    Hi,
    I have created a simple xMII transaction using BAPI. It is a simple BAPI with one input. Now i want the transaction to be executed by getting the input from the user through browser. Once the user enters the value and clicks on a button, I want the result of the BAPI to be displayed in the grid. How to link the BAPI/transaction with applet/Javascript coding.
    Thanks.

    The first thing I would recommend would be for you to collaborate with your colleague Vinodh, since his/her recent thread is very similar to yours:  Calling a BAPI from web page
    In your case, the iGrid applet will run the Xacue query template and automatically display the results from your output parameter.
    I would encourage you to take a look at the sticky thread at the top of the forum entitled "MII Manufacturing Templates Updated" since this MII project is full of samples for you and your colleague to learn from.

  • Open TRs not getting deleted after TECO production order

    Hi,
    We're having an issue.  We're using WMPP interface to supply the production line for the production orders.  The auto TRs are generated when the production orders are released. 
    After TECO the production orders, the open TRs are not getting deleted automatically.
    Could anyone know if these TRs get deleted automatically when we do the TECO production order?
    If yes, do we have any restriction or condition based on this, the TRs get deleted?
    Please explain.
    Thank you.
    with regards,
    Muthu.

    Hi Abhijit,
    Thank you for your reply.  It does not help me.
    The auto TR creation is happening now as required.  No issue on this.
    When you do the TECO, it also cancels the TRs.  I tested this also. 
    There're some scenario this open TRs cancellation is not happening.  I do not know when these open TRs are not cancelled.  If you know answer for this, please let me know.
    Thank you for your help and time.
    with regards,
    Muthu.

Maybe you are looking for