ACCESS PRIVILEGES NOTICE

I have just downloaded itunes 10.2 . I have mac os x 10.5.8 However, as soon as i open it an error message appears saying without having done any operation yet :
You do not have enough access privileges for this operation.
How can i get rid of this annoying notice?
Please send me an email too at [email protected]
Ηowever there is no problem in playing or importing the songs and doing any operation i ussually do...
Can it be that I still have 10.5.8...?
Panteleimon.

Similar Messages

Access privileges for Podcasts with VIsta

I'm having problems when attempting to "get" Podcasts that I've subscribed to. The error message states " There was a problem downloading 'name of podcast'. You do not have enough access privileges for this operation". These are all free podcasts, not requiring account set up or anything other than subcribing.
This only happens on my Wintel machine running Vista--on the Mac side I'm able to get the same episodes without a hitch. I've dug through the defender and administrator settings, but haven't found the solution.
Anyone know how to fix this?

Have you tried using Disk Utility's Repair
Permissions function?
Just tried. Both the "Verify..." and "Repair..."
buttons are greyed out.
Also, I noticed that, in this same Disk Utility
window, that next to "Owners Enabled:" it says "NO".
Is this part of the problem...that the Mac doesn't
see the iPod as "owned" by anyone? For what it's
worth, when I "Get Info" on the iPod, the user (my
wife) shows up, and is shown as being able to Read &
Write. So, according to that, it seems that someone
does "own" it.
Still baffled, but thanks for the tip, 0Ari0. We
might be getting somewhere...?
Yeah... it seems like YOU'RE not the owner...

Keep getting error re: access privileges

I'm periodically getting an error message in iTunes 9.0.1.8 for Windows (Windows 7 64bit):
"The iTunes Library file cannot be saved. You do not have enough access privileges for this operation."
As far as I can tell looking at the security settings for the folder where the iTunes library is saved, I DO have full access privileges. In fact, the last modified date for the iTunes Library.itl and iTunes Music Library.xml files is just a few minutes ago.
Also, I don't notice anything going wrong within iTunes, just these periodic, annoying errors. I could just check the "don't show this error again" box but I'd rather fix whatever is wrong.
Anyone have any clue what is going on here?
Thanks!

so i think that is a bug in software, apple must fix this bug soon!
We're primarily a user-to-user troubleshooting forum here, and so there's no guarantee that someone from Apple will see what you say. So, if you've convinced that is a bug, and you're not here to troubleshoot the problem, the most effective way for you to let Apple know about the situation would be to use the iTunes application feedback form (you'll find "Bug Report" under "Feedback Type").
Here's a link to the feedback form:
http://www.apple.com/feedback/itunesapp.html

Do not have enough Access privileges

I purchased an audiobook form Audible. It downloaded fine. When I open ITunes its asks for Audible username and pswd which I supply. After ITunes verifies account I get "Could not enable this Audible account because you do not have enough access privileges". I know this credentials are correct because I get a different message when I enter incorrect password. I have spent days researching this on Google and elsewhere. I have seen hundreds of postings with related problems for ITunes or Mac OS so I doubt this is audible specific. I have not seen any responses from anyone who can explain this. I am sure I am logging onto computer with full Admin privileges.
I did notice that some ITunes and IPod folders are marked Read Only. I can uncheck those and it seems to clear the read only status, but when I look back they are read only again. I do not know if this is related.
Thanks.

I got this to work.
I found some explicit notes in the support section for audible.com. It suggested registry permission tweaks. I applied those instructions to the ITunes registry setting (even though the instructions were for the audible settings.) The audible notes implied the problem arose because I was logged in a different user when I installed ITunes than I am now that I am trying to access content.
The link below contains explicit instructions. Good luck in copying the link to a browser
http://audible.custhelp.com/cgi-bin/audible.cfg/php/enduser/stdadp.php?p_faqid=3109&p_sid=BPQF-vXh&p_lva=3131&p_sp=cF9zcmNoPSZwX3NvcnRfYnk9JnBf Z3JpZHNvcnQ9JnBfcm93X2NudD0yNDImcF9wcm9kcz0mcF9jYXRzPSZwX3B2PSZwX2N2PSZwX3NlYXJj aF90eXBlPWFuc3dlcnMuc2VhcmNoX25sJnBfcGFnZT0z&pli=#

Encrypted disk image access privileges

Hi,
I use an encrypted disk image to store my important documents.
It remains mounted most of the time because I keep accessing or modifying files there (but at least, I know they're not accessible to anyone stealing my machine, plus if feel more secure uploading the whole image disk for backup purposes and in some contexts, I am careful to unmount the disk image).
It is stored on a Mac that I occasionally share with other people.
I have noticed that when these other people log into their account, they have access to the content of the mounted image disk.
Does anyone know a way to prevent that access? I have already tried removing all access privileges to any users, both on the disk image file and on the mounted volume but that did not change anything at all (only I and the special user "staff" have any privileges to the file and the mounted volume).
Does anyone have any idea how I can get MacOS X to hide the volume to any other users than me?
Thanks!

Where is it stored – in your home folder?
Select your_image.sparsebundle (may have a different file extension)
press command + i
set permissions
     me r+w, staff r (is fine), everyone no
mount the volume (doubleclick)
press command + i
set permissions
     me r+w, everyone else no
uncheck
     ignore ownership

I have been trying to save a document in illustrator and every time I try to, a dialog box pops up and says the following- Can't save the illustration. You do not have enough access privileges. id: -5000....This has been happening ever since I switched to

I have been trying to save a document in illustrator and every time I try to, a dialog box pops up and says the following- Can't save the illustration. You do not have enough access privileges. id: -5000....This has been happening ever since I switched to CC and whenever I try to save something in indesign, I get a dialog box that says that my file is corrupt. How do I fix this? I cannot get any work done !!!

You should ask in Illustrator
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

IPod Classic 80GB - "iTunes library cannot be saved you do not have enough access privileges for this operation" It says it has synced but it hasn't. Help please I am not very tech minded

iPod Classic 80GB. Message reads ' iTunes library cannot be saved you do not have enough access privileges for this operation'. It says it has synced but it hasn't. Please help, I am not very tech minded.

See this article about troubleshooting the error message regarding access privelages. It may be preventing your iTunes library from being able to save/retain music you have recently imported to it, which may explain why no new content is being added to your device.
Trouble adding music to iTunes library or importing audio CD
B-rock

"you do not have appropriate access privileges" - WHAT??

I did something to corrupt the operating system on my MAC G5. I had some things I really didn't want to loose on the main hard drive specifically - my iCAL, my iWeb, and my email. I had some other things on the desktop also.
A friend helped me to recover the system. Their suggestion was to copy all my main USER files onto an external drive, reformat the MAC Hard drive and then copy the USER file over to the machine again using the same short name I did before and setting that account to be an Admin.
I did that and now when I try to write to the internal hard drives I get the message "you do not have appropriate access privileges" or file error access denied. But I can write to any of the external hard drives.
I cannot figure out how to fix this. I deleted the USER/USER NAME (my old one)/Library/Keychain/login/login key and that didn't solve the problem.
Could it be that I need to reseat the internal hard drive??? or do I need to do something under keychain for the main computer and not the two user files I have in there now??
I was trying to do something really simple like copy a jpg file someone sent me to the internal HD and it wouldn't let me.
I appreciate your help. Every time I have posted a question, someone has helped and I really appreciate it. I searched the database for a similar problem but couldn't find it.

If you still have the User folder you copied to the external, instead of dragging it back which I think is causing problems with permissions, how about reinstall your OS using the Install disks on the internal, and then from their respective applications import just those particulars you wanted to keep.
For example if you dragged back the file com.apple.Mail.plist back to its home location in ~/Library/Preferences your Mail should connect as before. Then, in Mail you can then import your externally copied Mailboxes.
That's how I would have gone about it if it was a case of scavenging what I could of a corrupted boot drive. Maybe you can still do it this way.
Dragging a (User) folder onto an OS won't satisfy the OS that this is a valid user, rather just a confusing thing to deal with. I know it seems a simple thing to do but the OS just doesn't get it. It prefers having the User account set up in itself, and then it knows about it.
Message was edited by: roam

I do not have enough access privileges for this operation

I am trying to set up my wifes itunes on her new iMac with my account info so we can sync and start using our new ipads. The problem is that I have the above warning when I start iTunes. I can access itunes when I click ok but I can not authorize the account.
When I try to authorize the following warning shows up
There was an error storing your authorizaton information on this computer. The rerequired directory was not found or has a permission error. correct permissions problem and try again or deauthorize this computer if the permissions can not be changed.
I checked previous post and used the terminal. I checked info to make sure I am read and write, and I get a similar errlor when I try to deauthorize the account which i dont believe was ever set up. My wife does not think she set anything up.
I have iTunes 10.5.2
any help would be appreciated
Corey

Try here:
iPhone - not enough access privileges: Apple Support Communities

Re Time Machine "You do not have appropriate access privileges to save file ".002332b7be8a" warning preventing backups--this may help temporarily

My TM is often giving me the "You do not have appropriate access privileges to save file “.002332b7be8a” in folder “Time Machine Backups”" message when I go to select my backup drive. I've reviewed past archived discussions on this and, like many other people, gotten completely flummoxed trying to find a permanent solution. Tried the suggested fixes via Terminal and it didn't help because I couldn't get through the entire process without Terminal telling me it couldn't find a file or drive. When I can find the time, I'm going to try Tinker Tool to reveal where that numbered file actually is and give it another go.
In the meantime, for those who are desperate to get their TM working again to get at least one backup done, I can offer people a temporary solution that's worked for me.
I've found that restarting my iMac somehow resets TM and usually allows it to do at least one of its automatic backups, sometimes several, before it reverts back to failing and producing that same darn warning message. I only want a backup done once a day, so it's not that inconvenient to go this route.
There's another even quicker method (perhaps a little more risky but hasn't been a problem for me yet) that I've been using more recently, and that is to simply unplug the external while the iMac is on (I close system preferences first though, and make sure TM isn't actually doing anything at the time) then plugging it back in and choosing the backup drive again in the TM system preferences window once that drive has shown up again in the Mac's list of devices. I don't get that warning message when I do this. It works every time for me and so far it hasn't lost or corrupted any data on the external, despite the warning message you get on Macs when you unplug a USB device without ejecting it first. However, do this at your own risk--don't flame me if it backfires on you. If you're of the opinion that it's not wise to unplug the device this way, then fine, go ahead and state such in this thread, but be polite about it.
Hope this helps anyone who's frantic to make a backup without having to start from square one with a whole new complete initial backup (can take many hours to make one) on a fresh external drive.
By the way, I've read somewhere that this problem was fixed with Snow Leopard. Whether that's true is another matter. I'm not quite ready to update to 10.6 for other reasons, even though I bought it, and I figure some other people are also still using 10.5.8 out of fear and loathing around the unknowns of installing a new OS too, so that's why I thought I'd post this message (couldn't find a discussion around this that was still active and not archived).

noodlenose wrote:
My TM is often giving me the "You do not have appropriate access privileges to save file “.002332b7be8a” in folder “Time Machine Backups”" message when I go to select my backup drive.
Wow, I haven't seen that in a looooong time!
Tried the suggested fixes via Terminal and it didn't help because I couldn't get through the entire process without Terminal telling me it couldn't find a file or drive.
Do you mean in #C5 of Time Machine - Troubleshooting?
When I can find the time, I'm going to try Tinker Tool to reveal where that numbered file actually is and give it another go.
It should be at the top level of the drive.
By the way, I've read somewhere that this problem was fixed with Snow Leopard.
Yes. I'm not sure if it was 10.6.0 or one of the early updates, but I haven't seen any reports of this in quite a while.

SSL VPN message "This (client) machine does not have the web access privilege."

Hello!
I am trying to configure the SSL VPN (WebVPN) and I am almost done but when clicking on the URL's I configured in the bookmarks, I get the message "This (client) machine does not have the web access privilege. Please contact your SSLVPN provider for assistance." I looked through the many tutorials and guides in existence and none talks about such error and the fix for it. In fact, if I search the net for this error message I get only one match, in the Cisco website, where is say that "The client computer does not meet the security criteria of having web access functionality through the SSL VPN gateway." and as fix it gave this tip "Check the URL to the gateway or contact the administrator if it persists." So, nothing on the website about what this issue is and how to fix it. I will provide my IOS configuration and hopefully someone will spot the issue. Here it goes:
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname R1
boot-start-marker
boot-end-marker
logging message-counter syslog
no logging buffered
enable secret 5 $1$1LLX$u7aTc8XfNqPZhPVGwEF/J0
enable password xxxxxxxx
aaa new-model
aaa authentication login userAuthen local
aaa authentication login sdm_vpn_xauth_ml_1 local
aaa authorization network groupauthor local
aaa session-id common
crypto pki trustpoint TP-self-signed-1279712955
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1279712955
revocation-check none
rsakeypair TP-self-signed-1279712955
crypto pki certificate chain TP-self-signed-1279712955
certificate self-signed 01
3082023A 308201A3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31323739 37313239 3535301E 170D3130 30333233 31313030
33375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 32373937
31323935 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100A8EF 34E3E792 36660498 9801F934 E8A41865 3599EA35 B073AC91 D7A53AF4
A4390D2F CB3DB2DE 936B28F0 A25F3CE1 6F40FD9E E79096F2 F89620E0 B31A7B34
649BBA22 AE44CB55 9F38BF0C 2F2770CF 8380C167 C17D760C 380E28E4 FF7D6874
9EFC310A 2AA60835 F1AA384F CD1A0173 19C98192 EBFBD531 24CB9203 EA9E7D54
B2C30203 010001A3 62306030 0F060355 1D130101 FF040530 030101FF 300D0603
551D1104 06300482 02523130 1F060355 1D230418 30168014 0D9D62EC DA77EAF3
11ABF64D 933633F9 2BA362DC 301D0603 551D0E04 1604140D 9D62ECDA 77EAF311
ABF64D93 3633F92B A362DC30 0D06092A 864886F7 0D010104 05000381 81006853
48ED4E3E 5721C653 D9A2547C 36E4F0CB A6764B29 9AFFD30A 1B382C8C C6FDAA55
265BCF6C 51023F5D 4AF6E177 C76C4560 57DE5259 40DE4254 E79B3E13 ABD0A78D
7E0B623A 0F2D9C01 E72EF37D 5BAB72FF 65A176A1 E3709758 0229A66B 510F9AA2
495CBB4B 2CD721A7 D6F6EB43 65538BE6 B45550D7 A80A4504 E529D092 73CD
   quit
dot11 syslog
ip source-route
ip dhcp excluded-address 192.168.0.1 192.168.0.10
ip dhcp pool myPOOL
   network 192.168.0.0 255.255.255.0
   default-router 192.168.0.1
   dns-server 87.216.1.65 87.216.1.66
ip cef
ip name-server 87.216.1.65
ip name-server 87.216.1.66
ip ddns update method mydyndnsupdate
HTTP
add http://username:[email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
interval maximum 1 0 0 0
no ipv6 cef
multilink bundle-name authenticated
vpdn enable
vpdn-group pppoe
request-dialin
protocol pppoe
username cisco privilege 15 password 0 xxxxxxxx
crypto isakmp policy 3
encr 3des
authentication pre-share
group 2
crypto isakmp fragmentation
crypto isakmp client configuration group vpnclient
key cisco123
domain selfip.net
pool ippool
acl 110
crypto ipsec transform-set myset esp-3des esp-md5-hmac
crypto dynamic-map dynmap 10
set transform-set myset
reverse-route
crypto map clientmap client authentication list userAuthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
archive
log config
hidekeys
interface Loopback0
ip address 10.11.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface Loopback2
description SSL VPN Website IP address
ip address 10.10.10.1 255.255.255.0
interface Loopback1
description SSL DHCP Pool Gateway Address
ip address 192.168.250.1 255.255.255.0
interface FastEthernet0
description $ES_LAN$
ip address 192.168.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
interface BRI0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet1
interface FastEthernet2
switchport access vlan 2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
bundle-enable
dsl operating-mode auto
interface Vlan1
no ip address
interface Dialer1
ip ddns update hostname myserver.selfip.net
ip ddns update mydyndnsupdate host members.dyndns.org
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip policy route-map VPN-Client
dialer pool 1
ppp chap hostname xxx
ppp chap password 0 xxxx
ppp pap sent-username xxx password 0 xxxx
crypto map clientmap
ip local pool ippool 192.168.50.100 192.168.50.200
ip local pool sslvpnpool 192.168.250.2 192.168.250.100
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
ip http authentication local
ip http secure-server
ip nat inside source static tcp 192.168.0.2 21 interface Dialer1 790
ip nat inside source static tcp 192.168.0.15 21 interface Dialer1 789
ip nat inside source list 102 interface Dialer1 overload
ip nat inside source static tcp 10.10.10.1 443 interface Dialer1 443
ip nat inside source static tcp 10.10.10.1 80 interface Dialer1 80
access-list 102 deny   ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 102 permit ip 192.168.0.0 0.0.0.255 any
access-list 110 permit ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 144 permit ip 192.168.50.0 0.0.0.255 any
route-map VPN-Client permit 10
match ip address 144
set ip next-hop 10.11.0.2
control-plane
banner motd ^C
================================================================
                UNAUTHORISED ACCESS IS PROHIBITED!!!
=================================================================
^C
line con 0
line aux 0
line vty 0 4
password mypassword
transport input telnet ssh
webvpn gateway MyGateway
ip address 10.10.10.1 port 443
http-redirect port 80
ssl trustpoint TP-self-signed-1279712955
inservice
webvpn install svc flash:/webvpn/svc_1.pkg sequence 1
webvpn install csd flash:/webvpn/sdesktop.pkg
webvpn context SecureMeContext
title "My SSL VPN Service"
secondary-color #C0C0C0
title-color #808080
ssl authenticate verify all
url-list "MyServers"
   heading "My Intranet"
   url-text "Cisco" url-value "http://192.168.0.2"
   url-text "NetGear" url-value "http://192.168.0.3"
login-message "Welcome to My VPN"
policy group MyDefaultPolicy
   url-list "MyServers"
   functions svc-enabled
   svc address-pool "sslvpnpool"
   svc keep-client-installed
default-group-policy MyDefaultPolicy
aaa authentication list userAuthen
gateway MyGateway domain testvpn
max-users 100
csd enable
inservice
end
Thank you!

Hi,
Please check SAP note:
2004579 - You cannot create a FR company from a Package
Thanks & Regards,
Nagarajan

HT1386 I get an error message when I try to sync my iPod touch - "you do not have enough access privileges for this operation"

I recently installed a new hard drive on my PC, downloaded iTunes, updated the software on my iPod touch and now I get this error message when I try to sync: "you do not have enough access privileges for this operation." It never did this before, whether it's the upgrade in software or something in iTunes, but it's very frustrating, since I'd like to add more things to my iPod.

See:
iPhone - not enough access privileges: Apple Support Communities

How do i resolve my itunes from saying " The itunes application could not be opened. You do not have enough access privileges for this operation."

Everytime i click to go to my itunes, the message "The Itunes application could not be opened. You do not have enough access privileges for this operation." pops up. I have tried my best to fix it by adding another account to my computer and setting that one as the administator and mine as the regular user. When i did that the itunes worked on both, but when i changed my account back to administator and the other account to the regular user my account didnt work but the other one did. I also tried to uninstall and reinstall itunes. This message popped up when i tried to update the itunes to the newest one. And still it wont go away. Can someone help me please. Thanks!

Are you logged in with administrative rights? Did you check your security software settings? Troubleshooting security software issues

Help! "The iTunes application could not be opened. You do not have enough access privileges for this application"

I am getting the following error when trying to open iTunes: "The iTunes application could not be opened. You do not have enough access privileges for this application." I am logged in with the admin (and only) user account on my laptop, so I'm confused as to why this would start happening all of the sudden.
I poked around in the control panel trying to find random options that would fix it, but nothing has. I'm running Windows 7.
Thanks for any help!

have you seen this discussion ?

I can't sync my iphone to itunes. It says not enough access privileges? Help please?

I have a hp computer and I created another account on the computer so it's me and my mom's account. I been using my mom's but I want to sync it on my part of the computer and it says I don't have enough access privileges? I need help ASAP please?

What you describe indicates the user account on the computer has insufficient priviledges.
Is the account an Administrator or a basic user?

ACCESS PRIVILEGES NOTICE

Similar Messages

Maybe you are looking for