Access Privileges problem while updating ipod

Access Privileges problem while updating ipod
so im having troubles updating my ipod when i attempt to update it i get a message that says The ipod "Mitch" cannot be updated you do not have enough access privileges for this opperation
some of my things are updated but not all
any help would be greatly appreciated!
Dell   Windows XP  

hi j.block!
hmmmmmmmmmmm. one other thing that might be worth a try if all else fails. i have once seen something like this turn out to be caused by a really kinky version of this issue:
iTunes: "privileges" or "permissions" issue when importing audio CD or adding music to library
... where the permissions were odd on the ipod itself ... but i've only seen that happen once. it's probably worth checking on only if nothing else seems to be working for you.
love, b

Similar Messages

  • Problem While Updating ipod?

    A strange thing happened to me when I updated my 5g 30gig ipod. After buying a couple tunes for my library I plugged the ipod in. I accidentally selected "automatically update selected playlists only", of which two were selected. After itunes displayed "udating ipod" for a while I realized my mistake and ejected the ipod. I then plugged it back in and selected "automatically update all songs and playlists" and proceeded with the short update. After this my song count versus used/available space seem to have a discrepancy. My itunes library shows 4139 songs/21.31gb. When I higlight my ipod it shows 4112 songs/21.2gb, and right above that it says: used-10.76gb/free-17.0gb. Prior to this it showed around 25gb used/5gb free(including my photos). When I look on the ipod I cannot find anything missing. Can anyone explain to me why my used/free space changed so dramatically? Has this happened to anyone else? Thanks!

    this has also happened to me, only in the inverse
    i'm only using 11.98 gb of space (2260 songs), but it states that i have 17.06 used, and 10.76 gb free...

  • While updating Ipod we now have a blank screen and when connecting to itunes the ipod is not showing under devices

    While updating ipod touch we now have a blank screen. I have updated itunes but am unable to sync because the ipod does not show under devices. I have tried shuttng down and restarting but only have a blank screen or ap0ple logo. Sometimes the screen shows connect to itunes but that has been it.

    I have the same problem, after upgrading my itouch to iOS6, it doesNOT respond to anything, apple logo stays on the screen all the time and does NOTHING! restore does not work either.... i hope we can get an answer from someone soon... apple support did not have an asnwer.

  • Problem while updating the Support Package 17 on my SAP WAS SP9

    Hi,
    I'm facing problem while updating the Support Package 17 on my SAP WAS SP9
    ERROR 2006-10-13 10:23:22
    FSL-06002  Error 2 (The system cannot find the file specified.
    ) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...).
    Please help me in this regard.....
    Thanks in advance...
    Satya

    Hello gentlemen, I am also having problem with the following running on 64 bit Windows and SQL2005/64 bit. I am erroring in Step 8 'Updating JDBC' driver. I am attempting to update from SP9 to SP18. The WEBAS Jave installed went flawless but I seem to be stuck here. Any help is appreciated...
    ERROR 2006-11-22 10:13:57
    FSL-06002  Error 2 (The system cannot find the file specified.
    ) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...).

  • Facing problem while updating IInfotype 0009-bank details through workflow

    Dear SAP Gurus,
    I am facing a problem while updating Infotype 0009 through workflow which is integrdated with portal.
    Scenario:
    Employee logins to portal and changes his/her bank details like payee name, bank key, account number, postal code and city of bank, bank name etc.
    Once he submits the request, my workflow is triggered through SAP_WAPI_START_WORKFLOW which is called from portal and goes through various approval steps and finally reaches the step where the container elements are finally to be updated in IT0009.
    Field bank account number (BANKN), which is part of table PA0009 are easily updates using the FM HR_INFOTYPE_OPERATION by first enqueuing the employee number and after the update dequeuing it.
    However fields like payee name (EMFTX) bank key (BANKL) , bank name(BANKA -structure BNKA_BF-this is automatically fetched based on bank key) and postal code(BKPLZ) and city of bank (BKORT) are from structure Q0009 (on the infotype 9 screen level) and from table BNKA (at table level). The problem is that these are not getting updated by HR_INFOTYPE_OPERATION as they are not the part of infotype 9.
    Can anyone help me to understand how can these fields be updated ?
    Quick help will be highly appreciated.

    Hi Spantaleoni,
    Thanks for your quick response.
    Well actually the table BNKA is a master table for the bank information and we must not create entries in it or update the table programatically,  rather we should  use the available data in it.
    Now say employee currently has bank as A and he wants to change it as B which is available in BNKA then he will just select the bank B from search help provided in portal which again comes from table BNKA only. Employee then submits the info and it must get updated in the infotype PA0009.
    As far as think, this should be done on screen level of infotype PA0009 as I have already mentioned that certain fields are coming from structure Q0009 and they cannot be updated on PA0009 table level.
    I am just looking for way through which I can update the screen of infotype PA0009 of employee through workflow.
    Regards

  • There was a problem while updating ios 7.1 now my ipad isnt starting up just shows a symbol of itunes with a arrow towards it with its USB cable

    there was a problem while updating ios 7.1 now my ipad isnt starting up just shows a symbol of itunes with a arrow towards it with its USB cable

    YOU ARE IN RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • While updating ipod to ios5 it shows an error after downloading the update

    while updating ipod to ios5 it shows an error after downloading the update

    Are there any error details like numbers for example?
    Did you follow this article about installing iOS5? iOS 5: Updating your device to iOS 5
    Did you check your security software settings? iTunes for Windows: Troubleshooting security software issues

  • Problem while updating Delivery date uisng BAPI_PO_CHANGE

    Hi friends,
    Iam facing a problem while updating delivery date of a purchase order using the bapi BAPI_PO_CHANGE
    After the bapi is getting triggered iam geting sy-subrc = 0
    But in the return parameters iam getting 3 error messages so iam unable to update the  delivery date..
    Error meesage which iam getting are
    a) Purchase order still contains faulty items
    b) Enter Tax Code
    c) Instance 1000001 of object type PurchaseOrder could not be changed.
    How can i correct it..
    Please find my code below
    LOOP AT it_eket INTO wa_eket.
        wa_poschedule-po_item = wa_eket-ebelp.
        wa_poschedule-sched_line = wa_eket-etenr.
        wa_poschedule-delivery_date = wa_eket-eindt.
        APPEND wa_poschedule TO poschedule.
        wa_poschedulex-po_item = wa_eket-ebelp.
        wa_poschedulex-sched_line = wa_eket-etenr.
        wa_poschedulex-po_itemX = 'X'.
        wa_poschedulex-sched_lineX = 'X'.
        wa_poschedulex-delivery_date = 'X'.
        APPEND wa_poschedulex TO poschedulex.
    READ TABLE IT_EKPO INTO WA_EKPO WITH KEY EBELN  = WA_EKET-EBELN
                                             EBELP = WA_EKET-EBELP.
          IF SY-SUBRC = 0.
          WA_POITEM-PO_ITEM = WA_EKPO-EBELP.
          APPEND WA_POITEM TO POITEM.
          WA_POITEMX-PO_ITEM = WA_EKPO-EBELP.
          WA_POITEMX-PO_ITEMX = 'X'.
          APPEND WA_POITEMX TO POITEMX.
         ENDIF.
        CALL FUNCTION 'BAPI_PO_CHANGE'
          EXPORTING
            purchaseorder = wa_eket-ebeln
          TABLES
            return        = t_bapiret2
            POITEM        = POITEM
            POITEMX       = POITEMX
            poschedule    = poschedule
            poschedulex   = poschedulex.
        READ TABLE t_bapiret2 INTO wa_bapiret2 WITH KEY type = 'E'.
        IF sy-subrc NE 0.
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    * EXPORTING
    *   WAIT          =
    * IMPORTING
    *   RETURN        =.
          IF sy-subrc = 0.
            WRITE :  'DELIVERY DATE UPDATED'.
          ENDIF.
        ENDIF.
    how can i correct it...
    Regards
    Kumar

    Hi,
    Pass the following values...
    POACCOUNT LIKE BAPIMEPOACCOUNT...
    poaccount-TAX_CODE = ? (value)....
    That should take care of the missing field.
    Regards,
    Madan..

  • While updating ipod touch 4 i got an error message now stuck with apple symbol and empty bar. can i restart ipod?

    while updating ipod touch 4 i got an error message now stuck with apple symbol and empty bar. can i restart ipod?

    - What was the error message?
    - Try closing iTunes and then disconnect the iPod from the computer. Then reconnect the iPod.  If the iPod shows in iTunes then you can try again.  However, You should try to resolve the error message first.
    - If iTunes does not see the iPod try reetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - I recommend that you come back with the what the error message said and the condition of the iPod and if it is visible in iTunes.

  • Access privilege problems after transferring user to computer

    Hi
    I gave my flat screen iMac (lamp-shade version) to my parents when I bought a new Intel Core Duo. They had an older iMac. Both their old computer and the one I gave them are running 10.2.8. I connected the computers with a firewire, created a new user (with admin status) and transferred their user info onto my old computer. It all seemed fine, except now when I log on as them all of the applications have access privilege problems. Is there a global way for me to give them read and write access to everything?
    Thanks
    Intel Core Duo   Mac OS X (10.4.4)  

    You may need to post this in one of the older iMac forums iMac (CRT) or iMac (Flat panel) where someone may still be running OSX which is that old. As you may realize with your new iMac and 10.4, much has changed.
    Are you sure that when you sign in as the administrator and go to System Prefs/Accounts and view your access to the account that you created for them there are no access limitations?

  • TS3694 3295 error while updating ipod touch 4g ........how to solve this ...???

    3295 error while updating ipod touch 4g ........how to solve this ...???

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • Problems while installing = Ipod does not update

    I recently tried upgrading my version of itunes but while it was downloading the program froze and I had to close it. After I unplugged my Nano I realized that all the songs on my ipod were erased, but still in my library. The simple solution seems to plug in the ipod and let it update again.
    The problem I encounter here is that the computer doesn't read the ipod or something and I cannot update.
    I have tried going to file->update ipod but it cannot be clicked on.
    I have also tried updating a new version of itunes but the program starts to download and then tells me that I already have a version of itunes on the computer, and the install fails.
    Help!! Is there a way for me to fix this problem without completely restoring my itunes and losing all my music files??

    I recently tried upgrading my version of itunes but while it was downloading the program froze and I had to close it. After I unplugged my Nano I realized that all the songs on my ipod were erased
    You should never update/upgrade iTUnes while the ipod is connected to it.
    Go here and follow all steps for removing iTUnes http://docs.info.apple.com/article.html?artnum=93976

  • ITunes Access Privileges Problem

    I've just purchased a new imac and tried to load itunes for the first time on this machine. I'm running OSX 10.6.7 and iTunes version 10.2.1
    The application loads and i get to see the welcome screen, then a pop up box appears and says i dont have sufficient access privileges for this operation and the application then crashes. I've tried uninstalling itunes and downloading another version. I've tried creating another admin account and installing under a new profile. Each time the same problem.
    Anyone have any ideas that might help?
    J

    I've had the same problem with the sync. I've tried all sorts of changing permissions with no success. It appears to be some communication problem between iTunes and Vista. I haven't heard any fixes for this. I guess all we can do is wait for another iTunes update.
    Also, when syncing, some songs will go onto the ipod others wont, anyone have this happen? Seems strange that some songs would make it onto the ipod and others wouldn't when they all have the same permissions. Thanks.

  • Access/Privilege required for UPDATE/RELEASE actions

    Hi,
    I am a new user of BPEL 101.3.1. I have configured the identity service to CUSTOM and have given the following roles to the user created
    Roles :-
    1. BPMSystemAdmin
    2. BPMWorkflowAdmin
    3. BPMDefaultDomainAdmin
    4. BPMWorkflowReassign
    5. BPMWorkflowSuspend
    6. BPMWorkflowViewHistory
    The Acquiring/Reassignment of the task is happening successfully but then as an when i am trying to Update the Task or Release the Task then i am getting the following error.
    <2007-12-19 22:08:32,639> <ERROR> <oracle.bpel.services.workflow> <::> Invalid action on workflow task.
    Action RELEASE on task 2f9034534324d8b2:491a42ee:116f2f6cca6:-7b30 is not valid because of User does not have access/privilege to perform the action. .
    Contact oracle support if error is not fixable.
    ORABPEL-30036
    Invalid action on workflow task.
    Action RELEASE on task 2f9034534324d8b2:491a42ee:116f2f6cca6:-7b30 is not valid because of User does not have access/privilege to perform the action. .
    Contact oracle support if error is not fixable.
         at oracle.bpel.services.workflow.task.impl.TaskService.performPreActionValidation(TaskService.java:3408)
         at oracle.bpel.services.workflow.task.impl.TaskService.performPreActionValidation(TaskService.java:3440)
         at oracle.bpel.services.workflow.task.impl.TaskService.releaseTask(TaskService.java:1849)
         at oracle.bpel.services.workflow.task.impl.TaskService.releaseTask(TaskService.java:1840)
         at oracle.bpel.services.workflow.task.ejb.TaskServiceBean.releaseTask(TaskServiceBean.java:794)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAs(Subject.java:396)
         at com.evermind.server.ThreadState.runAs(ThreadState.java:622)
         at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.TxRequiresNewInterceptor.invoke(TxRequiresNewInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
         at TaskServiceBean_RemoteProxy_68d4144.releaseTask(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    I am getting the same error for Updating as well as Releasing the Task.
    Can any 1 tell me that whether i am missing on some role???
    Thanks
    Prashant N.

    Same problem here...
    Did you find a solution?

  • Closed iTunes While Updating iPod Nano

    :S I closed my itunes nano while updating the ipod. Now nothing would recongize the ipod. What should i do? I just got it too!! REALLY PANICKED!! T_T
    Thanks in advance!

    Put three more post asking the same question up instead of just 2?
    Post in the nano forum where this belongs?
    For real help:
    What OS are you using?
    What have you already tried to correct problem?
    Look here: http://docs.info.apple.com/article.html?artnum=61711

Maybe you are looking for