Access problems after migrating!

Hi guys,
Just purchased a nice new iMac (2.66Ghz model), and used the migration assistant to copy files across from my old powerbook to the new machine!
Generally it went OK, though I was surprised that my docs and photo's etc., didn't migrate with the apps, and I've had to reset some of the sharing and Permissions to allow me to open these files, but now I'm suffering some more serious problems with Photoshop (CS2).
Just tried to open an older .psd file and all was well with the opening - viewed the file with no problems and it allowed me to do some work on it! But then I tried to save it and I'm getting the following message:
"Can't save XXX.psd, as you don't have the necessary access privileges".
I tried saving as a copy, starting a new document etc., but still the same problem. Took a look at the application itself, but there doesn't seem to be any permissions associated with the actual app. itself? Do I need to reload?
Any idea's guys?
Thanks

That's the problem, it seems that my privileges are no longer valid for my new iMac/user account!
Files still open Ok on my old powerbook, but once I've migrated them across to the new iMac, I have to re-set all privileges for every file or folder I've moved, as they now are restricted to read only!
I'm wondering if I should have bought across all my pref files too?
I'm using the new imac on my home network, but can't really see how this would effect things!
Thanks for the input, I'll keep trying different things to see if anything else works!

Similar Messages

Problems after migrating application from 10.1.2 to 10.1.3

Hi,
I am encountering the following error while executing the application after migrating it from Jdeveloper10.1.2 to JDeveloper10.1.3. Could you please help me in this regard..
NOTIFICATION J2EE JSP0008 Unable to dispatch JSP Page : java.lang.NullPointerException
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:60)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:416)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:478)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:401)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:629)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
     at java.lang.Thread.run(Thread.java:595)
Message was edited by:
user491067

Do you have the problem with all JSP pages, or only a few of them ?
Does it happen in the Embedded OC4J only ?
Could you try to deploy your application in the Standalone OC4J and test it from there ?
I had a similar issue where the Embedded OC4J was unnable to run big JSP pages.
There was no problem with the Standalone OC4J.
Hope this helps,
Didier.

Serious problem after migration assistant - any ideas?

Hi folks-
I bought an iMac this weekend and for various reasons did not configure with data from my MacBook Pro when I first turned it on, but waited until two nights ago to use Migration Assistant to transfer all but users.
I updates both machines fully with Software Update first. MigAsst went fine until I hit the begin option and after a few minutes the iMac told me there was a problem with my MacBook Pro (MBP). I quit MigAsst on the iMac but even after an hour I couldn't escape it or quit the MBP, so shut down using the power button.
When I restarted, I had a black screen with lighted keyboard and startup chime. I hard-restarted, same thing happened. Third time, I got the grey apple window with no apple for about ten minutes, then a light blue screen with the spinning spokes (not the rainbow) and a slightly darker window with no spokes. The two blue windows alternated back and forth for maybe 8-10 seconds each endlessly until I restarted.
Since I live about 4 hours from the nearest Apple store and tech support was already closed for the evening, I restarted from the Snow Leopard disk and repaired permissions (there were many repairs) and repaired the disk (was told it was fine). I restarted and got the grey-blue-blue cycle again.
I reinstalled the OS from the Snow Leopard disk and everything worked fine - I ran as many tests as I know how to, even perturbed the casing slightly wondering if it was a loose video card wire or something. Nothing. It all worked fine for several hours until after the second Software Update (which as I recall was only Java and iTunes), and now all I get is the black screen again. Also, now the green light on the power cable is not glowing even though the battery reads as fully charged and the keyboard and startup chime are all hunky dory.
I'd think it was a video card issue, but there are too many incongruous symptoms. If I could at least start up from the OS disk again I could get my data off... Any ideas, diagnoses or suggestions would be much appreciated.
With gratitude and blessings.

The problem is described in a different post as well, and it is considered to be answered. However, the answers are not very satisfactory because they are complicated.
The underlying problem is that MacOS is looking for a FileVault user, while after migration the user files are actually not within a FileVault bundle.
I believe that there must be a setting to change the login properties for the user to not look for a FileVault user, but for a plain, non-encrypted user. So please, somebody from Apple answer this questions!
Command line very welcome, because I only have a command line user right now. And oh, my MBA didn't ship with a boot DVD so I don't even have the chance to reinstall my system easily. Also, getting my data out of the FileVault on my current machine, transfering everything again (almost 250 GB) and then putting them back into FileVault seems a bit too much effort for what appears to be a simple bit set somewhere…

BC4J problems after migrating JDeveloper 9.0.3 - 9.0.4

Hi!
We have application based on BC4J+struts framework. After migrating JDeveloper from 9.0.3 to 9.0.4 we are getting following errors:
JBO-27021: AttributeLoadException
JBO-27022: AttributeLoadException - it seems to be a problem between datatype mapping but on 9.0.3 application worked fine
next we get folowing error when we are inserting a row into the ViewObject. This error does not appear by first inserting but by some of the subsequent calls of insertRow.
java.lang.ArrayIndexOutOfBoundsException
     at oracle.jbo.server.QueryCollection.add(QueryCollection.java:1051)
     at oracle.jbo.server.ViewRowSetImpl.insertRowAtInternal(ViewRowSetImpl.java:1288)
     at oracle.jbo.server.ViewRowSetImpl.insertViewRowAt(ViewRowSetImpl.java:1255)
     at oracle.jbo.server.ViewRowSetIteratorImpl.insertRow(ViewRowSetIteratorImpl.java:1963)
     at oracle.jbo.server.ViewRowSetImpl.insertRow(ViewRowSetImpl.java:1933)
     at oracle.jbo.server.ViewObjectImpl.insertRow(ViewObjectImpl.java:5425)
     at cz.cca.akademie.action.ra9500.AssignActionPriradRole.execute(AssignActionPriradRole.java:23)
     at cz.cca.akademie.action.AssignAction.execute(AssignAction.java:55)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:778)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:536)
Unfortunately I'm not able to say when exactly these errors happen, they appear accidentally. It seems to be a problem with inner state of the ViewObject.
We would be glad for any suggestion
Thanks

CONTINUES...
What is the problem? Something with the ClassLoader of Tomcat 4.1?
I will try with Tomcat 4.0 and post this thread to tomcat-users mailing list!
bye,
Marco.

Major permissions problems after migrating to new iMac

Hi, I am very new to this and need some help. Have been using a MacBook pro for the past year to synch iPods/iPads that are used within our school. Purchased an iMac and proceeded to migrate users/files etc. After migrating I have had major problems with iTunes. My iTunes library is visible but I cannot synch any devices, have tried verifying permissions and fix permissions but to no avail. Any help would be very much appreciated.

Did you instal the program again, or try to migrate it from the old system (not a good idea)? I would run the installer again and it should correct the problem -- the Proximity dictionary for English (and probably others) is apparently not installed correctly.

Using Access forms after migrating data to Oracle

Hi,
One of the features provided by the original Migration Workbench appears to be the ability to modify a migrated Access database to use an ODBC connection to Oracle so that the original forms could still be used. I have just been through the process of migrating the demo Northwind database into Oracle using the SQL Developer Migration Workbench but this doesn't appear to be an option.
I am missing something or is this feature not available using the migration tools in SQL Developer?
And if it is missing what would be the easiest way to achieve this? From my limited exposure to Access converting the Northwind application manually appears to be rather painful.
Many thanks,
Vince

Hi Vince,
As you have correctly stated, the option to modify an MS Access database for the purpose of using the original forms is not available in Oracle SQL Developer Migration Workbench. As this option is no longer available, the easiest way to achieve the same result is to manually update your MDB file to reference the migrated Oracle tables. Once your MS Access Forms are referencing the link tables, you can continue using the forms as before. I would suggest doing the following:
NOTE: These steps should only be carried out after you have migrated your tables from Access to Oracle using Oracle SQL Developer Migration Workbench. I would also recommend that you take a back-up of your MDB file before carrying out the following steps...just to be on the safe side!
1. Create a new System DSM (using the ODBC Data Source Administrator dialog, via the Control Panel > Administrative Tools on your OS), using the connection details to access the newly migrated Oracle database schema. Test the connection, to ensure it's working correctly.
2. Open your MDB file in database view - double-click the MDB file, holding down the Shift key.
3. Remove the original Access tables.
4. Using the Insert > Table menu item in MS Access, start the New Table wizard and create Link Tables to each of the migrated tables in your Oracle schema. NOTE: Rename the Link Table(s) so it matches the original Access table name. This will save you from having to edit each of the Forms, to change the Record Source it's based on. The form will still have a reference to the original table name, so by reusing the same name your form should just continue working as before. The only difference is that the data is being retrieved from the Oracle database now!
If you have any questions regarding any of the above information, just respond to this thread & I'll get back to you.
I hope this helps.
Regards,
Hilary

Problems after migration from CS5 to 5.5 with Blackmagic Card

Hello forum,
we have an problem after an optimal migration from cs 5 to 5.5 projects.
different: there is an bm hd extreme 3d card in the system.
We are aware of the issue that there has to switch to BM player an the Timleinl settings to BM
But there is still a problem: we are not able to view the ingested material in the source viewer,
because there is another overlay - form the background or sometheing else - see attached photo.
We add new drivers for graphics/BM and patches for CS 5.5
None of these problems by creating new projects.
Also the applications also hangs after we try to close,
many thanks for your answers - Sven.

No reason to ask the same question twice. Just be aware that there are German forums as well.
Your problem is probably in the BM drivers.

Light Flow / Accessibility Problems After Update ..

OK Light Flow problem after update.... the problem is my Talk Back in Accessibility keeps turning on after i restart my phone i know it should not do that it only dose it when i have Light Flow - LED & Notification installed and Tturned on in Accessibility ..... i use Light Flow - LED & Notification to control my LED Notification becuse i hate the built in feature that came with the phone the default management keep the LED to dim hard to see ........ i have used the app ever scene i got the phone and never had a problem tell this crappy update JZO54K.I535VRBLMD3 / I535VRBLMD3 came out i also believe the update JZO54K.I535VRBLMD3 / I535VRBLMD3 that was pushed out made the Accessibility option bad / and everything else
The phone is new
i have hard factory reset it / battery pulled
it did it with old phone but did not do it before that update was pushed
i also got a (NEW) NOT REFURBED phone trying to solve the poor 4G LTE signal /battery life
and over all phone performance with no luck that update was a bad one and needs to be addressed
PLEASE FIX THE PROBLEM >>>>> VERIZON SAMSUNG GOOGLE ( PLEASE )

yep, I had that same problem too, but found a work around. First I tried disabling the accessibility options (but that was no good, I like the light flow notifications). I read from the app (see bottom of opening screen):
I found the work around to be just getting a folder app from the play store - the only talking it was doing was "opening folder" "closing folder" (annoying as he!!)
See the second screen for what that says as far as options. My opinion - just get the folder app, it's easier.

2 Problems after migration Project Server 2007 to 2010

Hi Everyone!!
I have 2 issues after migrate MS Project Server 2007 to Project Server 2010, in fact i had a lot issues, but i can solve almost all, so after solve all issues, just is pendings 2 issues very rare:
Backgrounds:
Migrated from: Windows Server 2008R2 - SQL Server 2008 R2 - Proejct Server 2007 with WSS 3.0 - All updates are up to date (CU is up to date) and all platform is ok
To: Windows Server 2008R2 - SQL Server 2008 R2 - Project Server 2010 SP2 - SharePoint Server 2010 SP2 - All updates are up to date (CU is up to date) and all platform is ok
3 Servers in the Farm, ----> 1WFE-1WAPP-1DB
Issues:
In the Project Center, some migrate Project don't show the icon with image about project documents, risk and issues although that project effectively have documents , risk and issues
In "Server Settings" , in section "Operational Policies" in "Project Sites" almost all projects don't show the URL with Project Site
For the issues 1 and 2, i tried some things:
Re publish all projects (approx 700 projects) with a script via PowerShell available in technet
Run the Wizard Again
Rebuild Solution
Restart the all Servers in the Farm
Restart Services ----> IIS - Project EventService - ProjectQueue - SharePoint Timer
and i can't solve it yet!!!
Please Any Ideas?
Erick Gutiérrez PMI Membership #ID 2089740 MTCS - Microsoft Project Server Managing Projects

Have you restored content DB successfully?
for point 2 have you performed:
have you synchronized project site under server setting --> operational policies --> Bulk Update Project
Sites
http://pwmather.wordpress.com/2012/10/08/projectserver-2010-bulk-update-project-site-issue-ps2010-msproject-sp2010-sharepoint/
after doing this publish all the project which are having issue it may solve your 1st issue.
You can check if below condition is applies to you (PWA 2007)
You may need to use the WSS site re-linker tool –
now built in to Server Settings in PWA as “Bulk Update Project Sites”. If you have changed URL die to a different port then re-linking should get your sites in order. In upgrade scenarios the “Previous Site Path” Web application might show as a GUID
in the drop down – however it still works and will re-link the sites.
http://technet.microsoft.com/en-us/library/cc197498(v=office.12).aspx
kirtesh

Ofgtel65.pll , CGDV$REF_CODES.SOFT_VAL problem after migrating to 10g

Hi,
We have migrated from Oracle 9i to 10g and
In 'OAS904' , i have used CGDV$REF_CODES.SOFT_VAL to populate a field with a meaning via a dynamic list in one of the FORM and if I query the form by giving a value and press F12,all fields are populating , its working fine but the same thing is not working after migrating the FORMS application to 'OAS10.1.2'. If I query the form by giving a value and press F12,its showing error like "FRM:40201 Field must be entered" for that particular field because that field is not populated and also a required field in the form.
Actually , this form is generated by designer.If i open the form using forms builder, i can see the auto generated code like 'POST-QUERY', in that CGDV$REF_CODES.SOFT_VAL is used to retrieve the meaning.
Note : ofgtel65.pll points to QMS_REF_CODES instead of CG_REF_CODES.
Am using headstart6.5.4.0 .
The generated form having post_query with the following code
CGDV$REF_CODES.SOFT_VAL(P_VALUE=>curr_value, P_MEANING=>l_meaning, P_DOMAIN=>l_domain, P_VAL_CODE=>TRUE);
But in the ofgtel65.pll ,
the soft_val method will have a query that refers to QMS_REF_CODES .But my meanings are present in CG_REF_CODES.
Any help would be of great help. Thanks in advance.
Regards,
Tharini.
Edited by: tharini on Aug 4, 2010 10:30 PM

Is this a Designer generated Form ? You may want to ask the question on that Forum too.

Strange Calendar sync problem after migrating to iOS5

Hello all,
I posted my problem as an "me too" reply to somebody else's thread but think it got a bit lost there.
Since I can't solve this problem I decided to make a new thread.
The problem:
After upgrading my iPhone4 to iOS5 I have a strange calendar syncing issue such that existing entries from one calendar (I've got two, see below) are duplicated on the other .... but only on the iPhone, not on the calendar server (Lotus Notes) itself!
As I couldn't find a normal solution to this problem (already removed the complete Lotus Notes traveler account from my iPhone and reinstalled it again, to no use: the duplicates pop up again) I finally decided to start removing the duplicate entries on my phone. To my surprise however they popup again!!!!!
I added a new entry to the original calender to see whether that one would popup in the other as well but this didn't happen.
It looks to me it must be something wrong on my iPhone as the "duplicates" do not show up in the calender database on the server (using Lotus Notes PC client) nor its replicas.
The configuration:
I sync with two calendars on my iPhone:
- gmail calendar for my private
- lotus notes server (traveler exchange) for my work.
The gmail calender also syncs with my desktop client (outlook 2010) via a small application "gSyncit".
This all worked like a charm on iOS4.
No matter where I modified, deleted or added entries (not only calendar, also contacts and mail) it all stayed perfectly in sync!
Does anybody out here noticed the same and/or has a solution to this?
BTW: I haven't activated iCloud for the calendar/mail/contacts (yet) ...

OK,
I found out what was wrong myself.
In the end it turned out that it had nothing to do with the iOS5 upgrade itself.
In case somebody else stumbles accross this very same problem, here's what was going on:
- Within the latest lotus notes client (on PC) the user has the possibility to display (read-only) external calendar contents (e.g. google's calendar).
- When setting this up you need to supply your external calendar's login/password information and next to that
- also have the possibility to select "View this calendar when offline or on a mobile device"
It was this setting (which I probably accidentally enabled) causing the "issue". Deselecting this option made my duplicate entries disappear on my phone.

Problem after migrate 6506 to N7K

we just replace 6500 with N7K, after migration there're some device (server,pc,printer) change its ip address configuration (subnet and gateway) by it self. can N7K did it?
Posted by WebUser Hafif Hery Husen from Cisco Support Community App

hi Darren im the "Web User" above
yes i believed the L3 config on N7K was correct but i need to make sure it .. that's why i posted this question
version 6.0(1)
interface Vlan83
description ** Link to Server Room 3 **
no shutdown
ip flow monitor Netflow-Monitor-AABHO-CS input
ip flow monitor Netflow-Monitor-AABHO-CS output
no ip redirects
ip address 172.16.83.248/24
ip router eigrp 8888
ip arp 172.16.83.25 03BF.AC10.5319
version 6.0(1)
interface Vlan88
ip flow monitor Netflow-Monitor-AABHO-CS input
ip flow monitor Netflow-Monitor-AABHO-CS output
ip address 172.16.88.201/24
ip router eigrp 8888
ip dhcp relay address 172.16.83.30
description ** Link to 8fl **
no shutdown
version 6.0(1)
interface Vlan81
ip flow monitor Netflow-Monitor-AABHO-CS input
ip flow monitor Netflow-Monitor-AABHO-CS output
ip address 172.16.81.201/24
ip router eigrp 8888
ip dhcp relay address 172.16.83.30
description ** Link to 1fl **
no shutdown
any other config that i should post ?

Problem after migration from time machine

I recently changed the hard disk in my macbook to a bigger one,
and then used migration assistant and my time machine backup to restore the system.
Everything seems to work just fine except aperture.
about 90% of my projects do not show any thumbnails, just outlined gray boxes with a file name
when I click on them I get to see the photo in question but when I click "show master" aperture says "master image offline" (and does not show the photo anymore)
my Library is referenced and the masters are located on the computers hard disk itself (not on an external one) and they are all there !
(i.e. they were perfectly transfered from time machine)
when I first opened aperture after the migration I got a message that the library was corrupted, I clicked repair and this produced a recovered folder
with a recovered project which as far as I can see is empty ?
I tried the 3 trouble shooting tools (repair permissions, repair database and rebuild database) none of which changed anything
I was going to try to restore the library file from time machine but now time machine says that I do not have permission to acces the pictures folder !?
(at least not on any backup older than the last one, which was done after the system was migrated)
I am starting to get stuck here, I found several references online to the same problem but no real solution.
Any ideas?

OK, so I did a clean install of snow leopard from the installation DVD and then used setup assistant to restore from time machine.
Since time machine had already made backups after I migrated for the first time it basically restored the system
to its previous state (with aperture not working properly), it did however restore the admin account which I had already deleted.
This allowed me to access my older time machine backups.
When I tried to restore the aperture library file (after first deleting the current one and emptying the trash)
I got a window saying copying 0kb from 10,68GB that just hung there
after checking my user account I found an aperture library file of about 6GB, I deleted this and did the restore again and let the window saying copying 0kb of 10,68GB run for half an hour, I then found an aperture library file in my account of 11GB. I opened aperture and guess what? exactly the same as before! no thumbnails and no access to masters except for about 10 projects (in fact every time I try this aperture makes previews for exactly 608 photos !?
I might try to copy the libary file from the old hard disk if I find something to mount it, but I am starting tho think that i will just have to reimport the entire library, and forget about the versions and be thankfull that I at least saved the masters :-(

Permissions problem after migrating

I recently had problems on a 17" G4 tibook and cloned the laptops disk/system to a firewire disk.
I then reinstalled 10.4 to the disk after a zero all data initialisation of the disk and migrated my user files from the disk to the laptop again.
All seems perfectly OK and appears to work fine, except I cannot log on to my server and an error message is produced:
"error -35
the operation cannot be completed because one or more required items cannot be found"
I tried to launch classic and as the classic folder could not be updated, I checked its permissions and then began to check more and found for all the imported files in my user folder and applications and the OS 9 system folder the permissions were wrong.
i ran a general permissions repair but this had no effect.
should I delete my user area and try again? what could i do to ensure the permissions are correct, can i do anything to make sure all the permissions are correct and allow me to get on the server?

Hi macmend,
Check Permissions Inside Home Folder
• Navigate to YourHome/Library.
• Get Info (Command - i) on folders for apps you are having problems with.
• Open the "Ownership & permissions" disclosure triangle.
• Make sure you are the owner, with "read and write" access.
• Click on "apply to all"
• If this is correct, open the "Applications Support" folder and do the same procedure (Command+I) for the folders with the names of the applications you are having trouble with.
Note:
The reason to check this is because repairing permissions with Disk Utility doesn't touch permissions inside your home folder.
EDIT: Also be sure your computer name is the same in System Preferences >> Sharing.
-mj
[email protected]
Message was edited by: macjack

ITunes access problem after iOS5 upgrade

I just finished upgrading my iPhone 4 to IOS5. Problem: my iTunes ID is embedded and I'm only prompted to enter my password. My iTunes ID is not an email address and I can no longer access my account. How can I change my ID in my phone?

Went down to the local Apple store and resolved my issues. I was told that they had never had anyone come in with the nickname issue before.
The fix:
DJ had me go to the iforgot.apple.com page (a very familiar page by this point). Under the box where you would enter your Apple ID, there is a link "Forgot Your Apple ID?". He had me click on it.
On the next screen, he had me enter my first name, last name and the email address that I thought was associated with my iTunes account. You can enter several different email addresses, just in case you had several different email addresses that could have been used when you established your Apple ID. I then clicked on 'Next'
On the next screen, I opted for the 'Answer Security Questions' Authentication Method.
Answering the required questions allowed me to then enter my email address as my Apple ID and the new password that I had chosen.
After doing so, everything was as it should be! I was able to update my apps that needed updating...AND... my $21.34 credit was back! Thank you DJ at the Roseville, CA Apple store!

Access problems after migrating!

Similar Messages

Maybe you are looking for