Access request Audit log
Hi experts,
For all the access requests we are getting the complete audit trail and Even we will get whether Risk Analysis is scheduled in the Workflow.
But is there any possibility to get the output of Risk Analysis in the audit trail?
Please suggest.
Thanks,
Hi Sriram,
in standard solution what you can see in audit log is the information risk analysis during access request was executed, there is no standard way to see this information in audit log.
If you go for abap customization, please note this information is usualy very big and long and adding it to audit log my simply make audit log unclear...and very much complicated.
Hope this helps,
Filip
Similar Messages
-
GRC Access requests - Audit Log
Dear All, GRC access requests is noticed with Provisioning failed messages. Access Request Audit Log is displayed with " Log on Failed / CPI - CALL: ThSAPCMRCV " message ( Screen shot enclosed ). Could you please share an insight on these messages and it's resolution. Thanks raj
Dear Raj,
please check with your basis team if the connection to the system works. Basically it seems like you have a connection error as the log on does not work.
Regards,
Alessandro -
Print Access Request Audit Log
Dear all,
we want do export or print an audit log of an access request.
If have tried to use the print-button in the audit log.
The IE opens, but I only get an grey screen.
Does anyone know how I can export (as pdf or something else) or print the audit log?
Which settings must be made or is there an other possiblity?
BR
MelanieMelanie,
please check the following notes that might help you:
http://service.sap.com/sap/support/notes/1848748
http://service.sap.com/sap/support/notes/1767179
Please let us know.
Regards,
Alessandro -
An error occurred while trying to access the audit log
Hi I have run Set-Mailbox ian.shapton -AuditOwner Update, Move, MoveToDeletedItems, SoftDelete, HardDelete
I then created and deleted an email and ran Search-MailboxAuditLog -Identity "ian shapton" -LogonTypes Owner -StartDate "12/21/2014 12:00" -EndDate "12/21/2014 13:00" -ShowDetails
I see An error occurred while trying to access the audit log. For more details, see the inner exception.
+ CategoryInfo : NotSpecified: (:) [Search-MailboxAuditLog], AuditLogException
+ FullyQualifiedErrorId : [Server=Mailbox01,RequestId=07f17915-f25d-4fd5-b23e-f07a2482f4a4,TimeStamp=21/12/2014 16:45:39] [FailureCategory=Cmdlet-AuditLogException] 255D6156,Microsoft.Exchange.Management.SystemConfigurationTasks.SearchMailboxAuditLog
MSExchange CmdletLogs shows Microsoft.Exchange.Data.ApplicationLogic.AuditLogServiceException: The Exchange Web Service returned an error while trying to access the audit log. Reason: 'Error','ErrorTimeoutExpired','The search operation could
not be completed within the allotted time limit. Please try to narrow down your scope to reduce the result set.'.
I am a Recipient Admin and Org Admin and can search other mailboxes using -LogonTypes Delegate
Any idea what I am missing here?
shapiHi,
I have the same problem when I run the Search-MailboxAuditLog command. It has been working for 2 weeks but suddenly after moving databases from one datacenter to another and back again it stopped working. The account running the command
is in all necessary roles needed.
This is what I have tested after it stopped working:
- Search-MailboxAuditLog -Identity "xxxxxxx" -LogonTypes Delegate -StartDate (Get-Date).Adddays(-1) = Works
- Search-MailboxAuditLog -Identity "xxxxxxx" -LogonTypes Delegate -StartDate (Get-Date).Adddays(-1) -showdetails = does not work and comes with an error.
"The Exchange Web Service returned an error while trying to access the audit log. Reason: 'Error','ErrorTimeoutExpired',
'The search operation could not be completed within the allotted time limit.
Please try to narrow down your scope to reduce the result set.'."
This is very bad for us because we use a lot of shared mailboxes with delegates and want to report delegate action on these mailboxes.
Environment:
- 3 datacenters
- Exchange 2013 CU7
Thorir
thorir -
GRC 10.1 Access Request - Provisioning Logs Not Available
Hello guys,
I am currently running into an issue with the user provisioning logs, the Request Approval notification which is sent to the user are at the end of an approved access request are as below and the Provisioning Logs tab is throwing a timeout error when opened.
"Hi Varsha Upadhyay (B001193),
The Request number : 26 , has been processed and the Request is Closed. The details are as follows:
Provisioning failed; check provisioning log for details.
Kind regards,
Access Control Administrator "
I have checked the table 'GRACREQPROVLOG' and I see the logs available in the table, When I open the logs for a particular request no I see the below error message under the 'Prov Message' field
"Type conflict when calling a function module (field length)"
Similarly in SLG1, I find the following message at the end of each provisioning task that has taken place at the end of a request being approved.
"Error in RFC; 'Type conflict when calling a function module (field length)'.
I made sure I gave SAP_ALL to all the RFC ID's and also the WF-BATCH ID's, and the integration scenarios are also defined correctly for all the target system.
It seems that this error is just preventing the provisioning details from being displayed in the email or in the Provisioning logs, but the user provisioning has actually taken place as expected (viewed in SU01).
So i'm wondering even after provisioning has actually taken place successfully, why would this error occur. Does anyone know the source for this error message, please let me know what am I missing?Hi Narsimha,
The error seems to be associated with wrong type being passed as a parameter to a function module.
Can you check the field mapping for your connectors in SPRO? There might be a mismatch happenning there.
Thanks
Sammukh -
The Audit Logs in the Azure Portal are not working at all for me today. Is there a deployment going on right now? Is this affecting other people or just me?
Hi,
I have tried accessing the Audit Logs from my Subscription and it works.
I suggest you to try the below
Sign out and Sign in again and check if you are able to access
Try opening the Portal on a different Web Browser and check
Hope this helps !
Regards,
Sowmya -
Hi all,
We just recently installed SP1 for AQ6.0 and it has helped out alot. Fixed alot of our small issues, but seems to have brougt up a new one. Our Audit Log Management job is now failing every run. It is getting an Access denied error. Actually the error line is JobShell: Exception occurred when processing operation operation 0:103: \\ntapmd01\Plumtree5\PtAudit\audit 9-8-06 2.log (Access is denied). Running verbose dosen't help. I see that the job is running as owner Administrator and I am trying to copy the audit log to a shared network location, but this worked before. Nothing changed except for installing the SP. Any ideas?
BerneyFirst off, it seems like installing the patch reset the user account that ran the plumtree automation service. All I had to do was change the user who runs the automation service and that fixed it.
As far as service patch 1 goes we had alot of issues when we went to 6.0 with remote users opening documents. SSO redirect kept sending them back to the home page. We had issues with the Intrinsic Community Links portlet, protected excel files, along with some others I can't think of right now. Everything looked fine from the admin point of view, but users were going crazy. All of that went away with the service patch.
Thanks,
Berney -
Provisioning log is not available on Access request type Change Account
Hi,
So I have and issue when I try to submit a request to add a role to a user and I'm trying to understand what could be the reason for it. Basically I have a workflow that works perfectly for a "Change Request". I can see that all the steps are executed and then at the end of the request when is suppose to do the actual role assignment I see the message "Provisioning log is not available" then the approval path is finish and the request is closed but when I take a look at the user in the back end the role is not assign. In terms of access I have try giving SAP_ALL to WF-Batch, nothing shows in Yellow or Red on SLG1 and in SPRO->AC-> User Provisioning -> Define request Type I see "Change Account" with SAP_GRAC_ACCESS_REQUEST. What else can I do to troubleshoot this error?
Note: I when back to the to the AC 10.0 Pre-Implementation From Post-Installation to First Access Request and everythings looks right in terms of the AC Configuration settings.Hi Jonathan,
In my question I was referring to SPRO - GRC/access control/user provisioning / maintain provisioning settings. Those need to be setup (min. global provisioning settings) in order to have role being assigned to user at the end of path.
Change account option you can see under request type is referring to change user master data(e.g. password/ account validity / details).
Is this system maintain by CUA? If so settings have to be different (see CUA settings in SPRO)
I would recommend moving to SP14 as in SP13 there were many bugs, by the way I believe the worst SP ever since beginning of AC is SP13 (maybe due to number), as it destroys many working functionality.
Filip -
GRC 10.0 Access request Management Audit
Hello All,
Can Anyone let me know what Auditors Check When they Audit GRC 10.0 Access request Management (excluding Configuration).
Thanks
Mohammed WasimHi,
ARM supports key ITGC controls for user access management, so probably audit would also cover:
- review of updated processes & controls
- check (based on sample) if all requests were properly approved
- review of correctness of approvers assignment
- verification if what was requested was provisioned
- timely removal of terminated access
- review of SoD controls embedded in process
- periodic review of user access
and maybe some more controls. In most cases it will be sample based testing so auditors may ask for a sample of requests to trace them to back-end systems and opposite sample of changes in users privileges to verify if proper requests were prepared for those changes...
Sometimes they could perform more tests on configuration and process, but this is up to particular auditor.
Best regards, Andrzej -
Hello,
I am workin on Oracle 11G STIGs and one STIGs states that audit log should include followings;
- User ID.
- Successful and unsuccessful attempts to access security files
- Date and time of the event.
- Type of event.
- Success or failure of event.
- Successful and unsuccessful logons.
- Denial of access resulting from excessive number of logon attempts.
- Blocking or blacklisting a user ID, terminal or access port, and the reason for the action.
- Activities that might modify, bypass, or negate safeguards controlled by the system.
I know how to enable audit trial with OS or DB, EXTENDED levels. However, I could not find if it is possible that audit logs can contain info of Blocking or blacklisting a user ID, terminal or access port, and the reason for the action.2687254 wrote:
Hello,
I am workin on Oracle 11G STIGs and one STIGs states that audit log should include followings;
- User ID.
- Successful and unsuccessful attempts to access security files
- Date and time of the event.
- Type of event.
- Success or failure of event.
- Successful and unsuccessful logons.
- Denial of access resulting from excessive number of logon attempts.
- Blocking or blacklisting a user ID, terminal or access port, and the reason for the action.
- Activities that might modify, bypass, or negate safeguards controlled by the system.
I know how to enable audit trial with OS or DB, EXTENDED levels. However, I could not find if it is possible that audit logs can contain info of Blocking or blacklisting a user ID, terminal or access port, and the reason for the action.
Think about that. If the port or terminal (client ip address) is blocked, then the communication never got to the database. So how would the database be able to audit an action that never got there? -
SharePoint 2013 audit log unexpected error
In one of my SharePoint 2013 site collection, when i try to save a audit log, i get unexpected error. It worked fine before last week and no any special setting has been applied before the issue appeared. The issue doesn't appear in other site collection.
i have tried to reproduce the issue with farm admin account and site collection admin, no success for all these accounts. However, i can see access denied error in the ULS log although i think the permission is not the problem. You may check the ULS log below.
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xC33B005
2jtj Assert
ShipAssert location: (0) condition: StackTrace: at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
Unified Logging Service c91s
Monitorable Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D00B
2jtk High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D00B
2jtq High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
2jx8 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
5s03 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
5s02 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
2jw0 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.43 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
Database ahjqp
High [Forced due to logging gap, cached @ 06/19/2014 10:48:07.68, Original Level: Verbose] SQL connection time: 0.064296296654057
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.43 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
General 8nca
Medium Application error when access /_layouts/15/CustomizeReport.aspx, Error=拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32
errorCode, IntPtr errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing)
在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.44 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
Runtime tkau
Unexpected System.Runtime.InteropServices.COMException: 拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr
errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing) 在
System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.44 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
General ajlz0
High Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): 引发类型为“System.Web.HttpUnhandledException”的异常。 ---> System.Runtime.InteropServices.COMException (0x80030005): 拒绝访问。 (异常来自 HRESULT:0x80030005
(STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb)
在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing) 在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator)
在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.HandleError(Exception e) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.ProcessRequest() 在 System.Web.UI.Page.ProcessRequest(HttpContext context)
在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() 在 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44i have added the account to the local admin group of SQL Server and SharePoint Server. the issue remains. it is the system admin of the SQL server.
Logging Correlation Data
Medium
Name=Request (POST:https://xxx/_layouts/15/CustomizeReport.aspx?ReportId=df9e0f20-f356-4115-9286-ac6eecbc03ce&Category=Auditing)
Authentication Authorization
Medium
Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|tlw\farmadmin, ClaimsCount=28
Logging Correlation Data
Medium
Site=/
Information Rights Management
Medium
Information Rights Management (IRM): Requesting user is System account.
Files
High
UserAgent not available, file operations may not be optimized. 在 Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean
disposeIlb) 在 Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult) 在 Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid
databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) 在 Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32
rowOrd, Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) 在 Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet,
String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean&
pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String&
pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies,
Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) 在 Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte
bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument,
Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object&
pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object&
pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) 在 Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String
bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean&
pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object&
pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel,
UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) 在 Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri
pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes,
Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders,
String& redirectUrl, Boolean& ObjectIsList, Guid& listId) 在 Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String
path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String&
siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64&
bytes) 在 Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetWebPartPageData(HttpContext context, String path, Boolean throwIfFileNotFound) 在 Microsoft.SharePoint.ApplicationRuntime.SPVirtualPathProvider.GetCacheKey(String
virtualPath) 在 System.Web.Compilation.BuildManager.GetVPathBuildResultFromCacheInternal(VirtualPath virtualPath, Boolean ensureIsUpToDate) 在 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath
virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate) 在 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext context, VirtualPath
virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate) 在 System.Web.Compilation.BuildManager.GetVPathBuildResult(HttpContext context, VirtualPath virtualPath,
Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean ensureIsUpToDate) 在 System.Web.UI.MasterPage.CreateMaster(TemplateControl owner, HttpContext context, VirtualPath masterPageFile, IDictionary contentTemplateCollection)
在 System.Web.UI.Page.ApplyMasterPage() 在 System.Web.UI.Page.PerformPreInit() 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.ProcessRequest() 在 System.Web.UI.Page.ProcessRequest(HttpContext context)
在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() 在 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) 在 System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception
error) 在 System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) 在 System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer,
IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 在 System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) 在 System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr
pHandler, RequestNotificationStatus& notificationStatus) 在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
Files
Medium
Spent 0 ms to bind 29783 byte file stream
Monitoring
High
Leaving Monitored Scope (GetFileAndMetaInfo). 执行时间=17.6751425083646
Monitoring
High
Leaving Monitored Scope (GetWebPartPageContent). 执行时间=17.8435806939653
OpenXml
Medium
OfficePackageLibrary::OpenPackage(app=3, path=C:\Users\FarmAdmin\AppData\Local\Temp\tmpBFE2.tmp, fcm=3)
Database
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
Database
High
[Forced due to logging gap, cached @ 06/20/2014 14:36:33.08, Original Level: Verbose] SQL connection time: 0.0727483919888626
Database
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
Database
High
[Forced due to logging gap, cached @ 06/20/2014 14:36:35.00, Original Level: Verbose] SQL connection time: 0.07969118458531
Database
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
0xC33B005
Assert
ShipAssert location: (0) condition: StackTrace: at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
Unified Logging Service
Monitorable
Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xC33B005
Assert
ShipAssert location: (0) condition: StackTrace: at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
Unified Logging Service
Monitorable
Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
Database
High
[Forced due to logging gap, cached @ 06/20/2014 14:36:36.86, Original Level: Verbose] SQL connection time: 0.0706353681551612
General
Medium
Application error when access /_layouts/15/CustomizeReport.aspx, Error=拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode,
IntPtr errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean
disposing) 在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Runtime
Unexpected
System.Runtime.InteropServices.COMException: 拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing)
在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
General
High
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): 引发类型为“System.Web.HttpUnhandledException”的异常。 ---> System.Runtime.InteropServices.COMException (0x80030005): 拒绝访问。 (异常来自 HRESULT:0x80030005
(STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset,
Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing) 在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close()
在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable
query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String
eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.HandleError(Exception e) 在 System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.ProcessRequest()
在 System.Web.UI.Page.ProcessRequest(HttpContext context) 在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() 在 System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) -
SQLException in the audit log for the Message Display Tool
Hi
I´m newbie in PI Technology, and i have some issues when i try to do the next.
This is the scenario:
I need to communicate two systems, for one side i have SAP, and for the other side i have ADI (legal system) so, i use PI to do this (the communication), PI receive the data from SAP by means abap proxy, until this everything is correct, then i do the mapping of the data and i send a message to ADI (with the SAP XI Runtime Workbench) by means JDBC adapter, if i check the sended message with "Message Display Tool" show that the message was sent (status "Delivered") but if i check the received messages option, in the audit log displays the five next errors:
Error: Could not execute statement for table/stored proc. "FADIA4" (structure "StatementFADIA4") due to java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: Adapter Framework caught exception: null
Error: Delivering the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation..
if there are somebody that maybe could know what is the problem?, could the problem be the side of the legal system?, because inside of PI when i do the Test Configuration in the Integration Directory, the end of the test is successful.
Any comment is well received!!
Thanks,
Vicman
P.D. sometimes the error is: java.sql.SQLException: Token ) was not valid. Valid tokens: DAY PATH YEAR LABEL MONTH OPTION RESULT CONNECTION TRANSACTION.
what does it means?Hi Pooja,
thanks for you quickly response!
XML sended:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_PgDocVentaECC_req xmlns:ns0="http://gmodelo.com/ECC/enviarCobranza">
<DT_DatosDeControl>
<MIDDLEWARE_ID/>
<QUICK_ID/>
<INTERFACE_NAME/>
<MESSAGE_ID/>
<LOG_ID/>
<USER_ID/>
<SOURCE_SYSTEM/>
<TARGET_SYSTEM/>
</DT_DatosDeControl>
<DT_PagoDocVentaECC>
<VKORG>TVKO</VKORG>
<VKBUR>TVBUR</VKBUR>
<VKBUR1>TVBUR</VKBUR1>
<ROUTE>TVRO</ROUTE>
<ROUTE1>TVRO</ROUTE1>
<BLART>Q</BLART>
<BELNR>100</BELNR>
<WRBTR>200</WRBTR>
<LFART>100</LFART>
<VBELN>100</VBELN>
</DT_PagoDocVentaECC>
</ns0:MT_PgDocVentaECC_req>
this is the XML received:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_PgDocVentaADI_req xmlns:ns1="http://gmodelo.com/ADI/recibirCobranza">
<StatementFADIA7>
<FADIA7action="INSERT">
<Table>FADIA7</Table>
<Access>
<NUMCIA>123</NUMCIA>
<NUMALM>234</NUMALM>
<SUBALM>300</SUBALM>
<CVETOP>16</CVETOP>
<FOLOPV>22</FOLOPV>
<SECOVA></SECOVA>
<IMPOVA>200</IMPOVA>
<ALMOVA>5678</ALMOVA>
<SUBOVA>21</SUBOVA>
<TOPOVA>21</TOPOVA>
<FOPOVA>41</FOPOVA>
<FECOVA>100</FECOVA>
<STSOVA> </STSOVA>
</Access>
</FADIA7></StatementFADIA7>
</ns1:MT_PgDocVentaADI_req>
what do you think about it?, anything wrong? -
Hi,
I'm using the workflow application "Audit" as an activity in my custom workflow and I'm passing the required arguments.
In the workflow trace file, I can see that the Audit application is run using the passed parameters but no record is being created matching that information in the "log" table.
Any ideas/suggestions?
Thanks
Here is the trace for your information:
Resolved reference requesterWSUser = object
Assigning requesterFullName = Test1 Manager1
Action Set Audit Resources List
Result title set to 'Set Audit Resources List'
Evaluating XPRESS
Resolved reference approved = false
Resolved reference auditApps = [AD_Simulated]
Resolved reference auditApps = [AD_Simulated]
Assigning depApps = [AD_Simulated]
Action Audit
Result title set to 'Audit'
Iterating over depApps = [AD_Simulated]
Iteration 0
app = AD_Simulated
Argument op = audit
Argument type = User
Argument status = success
Argument action = View
Argument reason = User Access Recertification
Argument subject = TestManager1
Resolved reference user.waveset.organization = null
Resolved reference app = AD_Simulated
Resolved reference app = AD_Simulated
Argument resource = AD_Simulated
Resolved reference enduserId = testuser4
Argument accountId = testuser4
Resolved reference enduserView.accounts[Lighthouse].firstname = Test4
Resolved reference enduserView.accounts[Lighthouse].lastname = User4
Resolved reference enduserId = testuser4
Resolved reference requesterFullName = Test1 Manager1
Argument error = The access of the user Test4 User4(testuser4) has been recertified by Test1 Manager1
Calling application 'com.waveset.session.WorkflowServices'
Application requested argument op
Application requested argument logResultErrors
Application requested argument action
Application requested argument status
Application requested argument type
Application requested argument subject
Application requested argument name
Application requested argument resource
Application requested argument accountId
Application requested argument error
Application requested argument parameters
Application requested argument attributes
Application requested argument originalAttributes
Application requested argument overflowAttributes
Application requested argument auditableAttributesList
Application requested argument organizations
Step complete 'Audit'
Step inactive 'Display Message'
-------------------------------------------------------------------------I agree with the anokun7. Check to make sure the action your are giving it is a valid one. ( See IDM Workflow Forms and Views pdf and search for Action Names, it will give you a list of all the valid actions) Also you can add your own attributes to the Audit object as well using the attributes variable. ( It expects a map: <map>
<s>Key</s>
<ref>value</ref>
<map>
Value can be a reference, or string, or however complex you want to make it. Just be aware of what view (if any) is available at the time you call the audit. Hope this helps
Message was edited by:
dmac28
Oh yeah..The attributes will appear on the audit log reports, Based on what action and type you audited it will show up on that record. i.e Delete action, on Type User...that audit record will have a changes value which will have whatever attributes you passed to the audit object. -
Audit log + manual update + specify download location
Hi all,
I'm evaluating whether we can use Java Web Start for our new product, for geographically distributed software deployment.
I've the following questions that I could not find answers in the official documentation:
- Can it support manual update? i.e. is there any way I can put a button on the application UI so that instead of checking latest version on every program start, the end-user can manually initiate software update.
- Can I extend it to support audit log? i.e. we need to keep track of which client upgrade to which version in a centralized database (as audit trail), and when such update occurred. Can we do this?
- Some of our end-user has no access to local filesystem, they only have access to dedicated shared network drive, can we customize Web Start so that it download and save the new version to a specific location, instead of C:\temp?
- We have a few jar files for the application. How can we ensure that all jar files are either updated, or not updated at all? i.e. kind of transaction concept.
- One of the jar files contains some configuration files, which need to be expanded in exploded format (to allow runtime change of configuration options). How can we do that?
Thanks a million.Hi all,
I'm evaluating whether we can use Java Web Start for
our new product, for geographically distributed
software deployment.
I've the following questions that I could not find
answers in the official documentation:
- Can it support manual update? i.e. is there any
way I can put a button on the application UI so that
instead of checking latest version on every program
start, the end-user can manually initiate software
update.currently, no - this is a requested feature being considered for 6.0
>
- Can I extend it to support audit log? i.e. we need
to keep track of which client upgrade to which
version in a centralized database (as audit trail),
and when such update occurred. Can we do this?only by controling a servlet or jsp page that generates the jnlp file and keeps track of what requests are made for the jnlp file and the resources of the app. Java Web Start itself runs on the client machine.
>
- Some of our end-user has no access to local
filesystem, they only have access to dedicated shared
network drive, can we customize Web Start so that it
download and save the new version to a specific
location, instead of C:\temp?webstart itself only downloads into its own cache (by default on windows XP at c:\Doccuments and settings\<user name>\Application Data\Sun\java\deployment\cache\javaws
this cache location can be configured.
in version 6.0 we will have capability to disable caching, but curent version must have a cache.
>
- We have a few jar files for the application. How
can we ensure that all jar files are either updated,
or not updated at all? i.e. kind of transaction
concept.
Java web Start currently checks timestamps of all downloaded jars before launching application, and will only update all or none.
- One of the jar files contains some configuration
files, which need to be expanded in exploded format
(to allow runtime change of configuration options).
How can we do that?If you must access these resources as files, you will have to extract them using ClassLoader.getresourceAsStream(), and then write them to disk yourself.
>
Thanks a million./Andy -
ARQ: Default Role Provisioning Problem in Access Request???
Hi,
This Business Scenario is very common to have default role(s) assigned to a User at the back end system. So I have the same requirement. In achieving this, I followed below thread here:
MSMP Issue - GRC 10
I have also followed the note#1616092 for configuring the Default Roles.
I have performed below activities:
1. Param#2009 = YES
2. Param#2010 = 001
3. Param#2011 = REQUEST
4. Param#2013 = SYSTEM
5. Param#2038 = YES
6. Imported a test role and NO ROLE OWNER is maintained.
7.In NWBC->-AM->RM, I maintained a test role as a default.
Now when I raise a request, application is successfully adding the default role to the request. However, the problem I am facing is that, one Manager approves the request, it is getting failed.
The Audit Log says that, the STAGE is "Completed" but I could also see "No Agent Found, Cancelling path XYZ (in stage no. 002- GRAC_ROLEOWNER)
May I know what I am missing here? Why I am getting error and how can I resolve it?
Please advise.
Regards,
FaisalHi Faisal,
sorry for late resposne I was away traveling.
default roles are being added by default to access request
Yes, these roles are added to the access request.
FN: OK
and this roles are following your normal paths which I guess assumes manager and role owner.
How such roles (not having role owner) will follow the normal path Manager->Role Owner if we are enabling routing (Rule ID: GRAC_MSMP_ROUTE_NO_ROLEOWNER) at manager stage level? Can you please help me understand this?
FN: OK If you enable routing it will go to routing path. I have understood your post as you put in question the behavior of default roles and my point was - they act exacly the same like regular roles.
- request is going to detour path
Does it answer my question?
FN: My point was default roles like all other will go to detur path (assuming you setup it globaly)
Deafault roles can have separate path (in my case) where only supervisor is approving it.
Instead of "GRAC_MSMP_ROUTE_NO_ROLEOWNER" I believe we can have our own rule to have a separate path for such default roles based upon business requirement. Correct me, if required.
FN; correct
It was design in way that initiator rule based on role crtivality is sending this rule to separate path without role owner.
Again, I believe you have enabled your custom rule here to achieve your business requirement instead standard rule id.
correct
If you do not have separate path - this role like any other will follow standard path you have.
Here, I had used a stage called "ZNO_STAGE_PATH" for routing the system line item, which does not have any owner. I used the same path ID for "GRAC_MSMP_ROUTE_NO_ROLEOWNER"Rule ID and it is working fine as of now.
FN: good
My question is that, do you think if I don't use "ZNO_STAGE_PATH" as Path ID for "GRAC_MSMP_ROUTE_NO_ROLEOWNER" Rule ID, should it follow the standard Manager->Role Owner path and these default roles get approved and assigned automatically?
FN: You should use the path ZNO_STAGE_PATH as path ID for routing rule.
If the role does not have role owner it will not allow you the even get to Role Onwer stage - request will be detured.
My point from the begining was - instead of using the routing rule - in our case we used separate path for default roles without role owner:) only consisted with manager stage. Again your approach is different but also will work.
Then which Path ID should I use for "GRAC_MSMP_ROUTE_NO_ROLEOWNER" Rule ID, as it is mandatory?
Should I use my current path for New/Change Account where at Manager level this was routed due to non availability of role owner?
Are you asking for default roles?
Please advise.
Regards,
Faisal
Maybe you are looking for
-
Blackberry wont open on my mac
when i had a regular pc i used to plug my blackberry via its usb cord and a file will show, letting me copy pictures and songs from and into the blackberry. with my macbook pro when i do the same thing, it wont even show me that there is an external
-
Hello everybody, Yesterday I was googling because I had a problem with time machine displaying wrong dates on my old backups, I found this command to copy/paste on terminal which I did. rm ~/library/preferences/.Global* ~/library/preferences/byhost/.
-
Help switching to Mac from Windows
I am a VERY inexperienced Windows user. I have a Gateway laptop that has ok performance, but has begun acting up with it's battery and is no longer covered under warranty. My main question is, how easy is it to get used to a Mac? I have never used it
-
Messaging applying a custom patch
Hi, I need some help, I create a custom patch for a page in EBS R12 to my custom application xxx, but when I applying the patch this message always appears: This Patch seems to have been applied already. *Would you like to continue anyway [N] ?* How
-
Re-Downloading Photoshop Elements 11
Hi y'all! I'm tryin' to re-download Photoshop Elements 11, that I bought about a year ago, onto my new Mac. The first time I bough it, I downloaded it onto a Windows Computer...I used it on there for about a year. Now that I have a new laptop, I want