Access restriction for business objects in same solution

Hi All,
Requirement: I have one single solution with 4 modules. 1 module is common and other 3 are industry specific. When i roll it out to a customer, i what restrictions on Business Objects. So that i can roll out single or combination of modules as per requirement.
Hence the configuration requirement would be  as follows:
   We need one core configuration for the entire solution which will have the Common Scope part included in it.
   We need industry wise configuration ( could be business configuration )
   Script level screen restriction.
We tried creating a BAC element with Business Topic and Business Options and tried to link BO's to it.  But we are finding a problem with this solution, even a user will be able to change the configuration and get access to a module which he didn't pay for.
Regards,
Rudhra Udayakumar
[email protected]

Hello Rudhra,
If the switches are in the BC every user with access to the BC can switch the modules on and off.
As we do not support the interaction / referenceing between different solutions (at least not in the near future ) you need to put all you need in one solution.
I understand that you want to make a reuse of the Common module somehow.
My suggestion would be
Develop the Common in a Solution Template
Develop each industry specific in an own solution
(Re-)Deploy the Common Solution Template to each of the industry specific solutions
You can then sell the industry specific solution one by one and have only one development source for the Common module.
HTH,
   Horst

Similar Messages

  • EWA for Business Objects (XI 3.1) within SAP Solution Manager

    Hello!
    We use Business Objects (XI 3.1) and would like to get weekly a EWA report within our SAP Solution Manager.
    Our SAP Solution Manger has only ABAP stack and it has the SPS version 25.
    We also do not use Wily Introscope/Diagnostics and E2E tools within SAP Solution Manager.
    Question
    Is it possible to set up EWA for Business Objects with our requirements (SOLMAN with ABAP stack and without E2E/Diagnostics tools)?

    Hello,
    The short answer is no. You can verify this in SAP Note  1507629  - Preparing a BOE system for Service Sessions in Sol. Manager.
    "...1.) Managed System Setup
    Perform the Managed System Setup for SAP BusinessObjects Enterprise as
    described in the "End-to-End Root Cause Analysis System Landscape Setup
    Guide". This guide can be found in the SAP Service Market Place:
    -> http://service.sap.com/diagnostics
        -> Navigate to the "Media Library"
           -> Open the document "SAP Solution Manager Landscape Setup Guide"
    Please ensure that you perform all steps mentioned in the guide which
    are relevant for your product and version. Please read also SAP note
    1357901, which is also referred to in the above mentioned setup guide."
    So this is a requirement. There are also pdf documetns attached to this note  that describe how to setup the EWA in Solution Manager. EGI_SBOP_EWA_part1.pdf and EGI_SBOP_EWA_part2.pdf.
    The fact you have no Java stack and have not installed Diagnostics, just means it has not been done. It can be done and then you can do a managed system setup, and the balance of tasks required to prepare the system and Solution manager to generate EWA reports for the BOE system. Its just more work, not a show stopper.
    Regards,
    Paul

  • Trex search for business object in portal

    Hi
    I would like to build a KM search iView in portal which enables users to search for business object from backend system.
    I have built up the indices for business object in the backend system. In portal->trex monitor->display index details, I can see the indices which are created from backend system. But soemhow, I feel the indices are not usable, as I can not see them in the indexing monitor. And after I created an KM search iview with search component 'search_input_indexes', my index created from backend can also not be shown in the preview of the iview.
    I guess there is some step missing. Any help will be appreciated.
    Thanks and best regards
    Yingzhi

    Hi Yingzhi,
    with current releases, business objects indexed through the ABAP-based Search Engine Service (SES) or directly from certain SAP solutions to TREX are not by default accessible from KM.
    The next release after NW2004s will enable Enterprise Search and provide the meta-search engine for parallel search access to business objects and KM documents.
    Please see the following presentation for some explanations on SES and Enterprise Search and note stated time-lines:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73f3eedf-0501-0010-0aa6-950694c02f99
    In some monitors that access TREX directly from the portal, you may see the business object indexes, but they are not actually known to KM.
    Regards, Karsten

  • Package for Business Objects Explorer

    Hello,
    can anyone say what the "name" of the package is that we have to order to get access to ASP Business Objects Explorer software?
    We want to use the non accelerated version of Explorer first.
    I am asking here to speed up the process - I want to give the information to our account manager.
    Thanks in advance,
    André

    It is sold as an add-on.  I don't believe there is a 'package' name specifically.  Package names are usually used for the SAP ABAP or JAVA based products. But the product name you're looking for is listed on Service MarketPlace as "SBOP Explorer XI 3.2".  The Application Group name is: "SAP BusinessObjects Portfolio"

  • Version Control for BUSINESS OBJECTS repository

    Hi,
    Do we have any version control for business objects repository?
    Thanks

    Hi
    I am hoping someone can answer my Version Control queries. The LCM document is limited in its detail on VM.
    I am currently testing the BO LCM 3.1 and while it appears very easy to use especially for promotion, the Version Control Manager seems to be lacking in controls and a clear promotion path from dev to test to uat to prod.
    We have set up 2 identical environments for UAT and PROD.
    And using the Version Control part of LCM creating version control for a universe.
    Logged into VM in UAT
    We have selected a universe
    Added it to VM
    Made a change to the universe in Designer
    Exported it
    Then Checked it in
    Can now see 2 versions in the history and the VMS Version. All good
    I then click on swap system and log into PROD
    The VM history is also there in PROD
    I have a number of concerns and questions and can't seem to find the solution to them anywhere.
    1. VM seems to be lacking a controlled process from all the environments. Basically we want to deploy following this path;
    Dev - Test - UAT - PROD
    There does not seem to be any controls or security which would stop you from GET VERSION from the DEV environment and putting that straight into PROD. Obviously we would not want that to happen.
    We would only want to GET VERSION from UAT
    Similarly for UAT We would only want to GET VERSION from TEST
    And for TEST We would only want to GET VERSION from DEV.
    Granted, we currently only have 2 identical environments.
    But Is there controls that would stop you when in PROD from getting versions from any other system other than UAT?
    Also is there any reason why no promotion is required when using VM.
    This seems to negate the Promotion Function of the LCM
    Any advise would be greatly appreciated with this.
    Many thanks
    Eilish

  • Authorization & Access Restriction for Z field

    Hello Experts,
    I had created a Z field in Sales Quote using KUT. For this Z field few employees should not be able to edit. How can this be achieved through authorizations or is there any other way.
    Thanks in advance.
    Best Regards,
    Lakshith

    Hello Lakshith,
    Check the below screenshot. You can check Field & Actions Tab in Access Management for Business Role. Try restricting at field Level for your custom field.
    Regards,
    Chandan

  • Access restriction for linksys WRV210

    Greetings,
    how can i make access restriction for more than 1 IP in linksys WRV210????
    i dont want to use URL filtring

    Hi korkomaz, I hope that answered your inquiry. Moving forward please refer to the link below as these products are now being handled by the Cisco Small Business Support Community.
    https://www.myciscocommunity.com/community/smallbizsupport
    Thank you.
    The Search Function is your friend.... and Google too.
    How to Secure your Network
    How to Upgrade Routers Firmware
    Setting-Up a Router with DSL Internet Service
    Setting-Up a Router with Cable Internet Service
    How to Hard Reset or 30/30/30 your Router

  • Language attributes for business objects ERC_CDCY

    Hello,
    I need to activate TREX index ERC_CDCY from our e-recruiting system using SES_ADMIN transaction.
    When I activate it, I receive error message UNCAUGHT_EXCEPTION (CX_SY_OPEN_SQL_DB) at the
    relational index level (Relation of candidacy).
    I opened a message with SAPnet and got the following answer:
    Indexes are only created in english compared to others systems that contains indexes in both languages (EN, FR). We could not find any french attributes for business objects ERC_CDCY which is required (at least 7 words) to index it in french language.
    Do you know which transaction or SPRO menu path I could use to maintain de language attributes and the 7 words?
    Thanks for you help
    Hugo

    Hello Huga,
    About maintaining the language in E-Rec  you can have a look at the table
    V_T77RCF_SELANGU, there you can maintain the different language.
    The exception you are getting might be coming from the TREX side. please check the following notes:
    1260684  SQL statement terminates: "Too Complicated SQL
    1249465   TREX 7.1: Installing TREX for Embedded Search
    Best Regards,
    Deepak.

  • How to do the Unicode Check for Business Objects ?

    Hi all,
    How to do the Unicode Check for Business Objects ?
    Note: All business Objects are stored in BOR (Business Objects Repositary)
    Thanks in advance
    Sri..

    Hi..
    i have used the  UCCHECK  transaction for some business Objects
    For some business objects it is showing that No Unicode Errors found Ex: Z00MARA
    and for Business Objects it showing the message like : There is no program corresponding to this selection.
    Why system is showing like this ?
    Thanks in advance
    Sri..

  • Access Restrictions for Time?

    I keep trying to set access restrictions for my wrt54g router for time. There is no 12 for time so I'm selecting 11:55 pm to 6am but I keep getting an error message of, "end time must be bigger then begin time." I get this no matter if I select 9pm, 10pm, etc.........
    Any ideas?

    You cannot choose a time frame through midnight. You have to split it in two rules, one before midnight and one after, i.e. choose 12am to 6am and 9pm to 11:55 pm.

  • Three-system landscape for Business Objects

    Hello!
    I'm new at Business Objects and I don't have imagination about it landscape. Do I need to make three-system landscape (D Q P) for BO with broadcasting to BI (D Q P) systems correspondingly? Or maybe I need make all customizing in one BO system? Could someone advice any documentation about lanscape for BO and BI?
    Thank

    Hi
    Please refer this site for Business objects
    http://help.sap.com/businessobject/product_guides/
    Regards
    Prashant

  • WRT54GS Access Restriction for WiFi Connected Devices

    I have the WRT54GS v4 running with the latest Firmware Version: v1.06.3 -- I am attempting to add Access Restrictions for a few MAC addresses and IP addresses (my kids iPod Touch and laptop).   
    I am simply wanting to deny total internet access from 9pm to 7am.   I have gotten it to work but ONLY for computers that are actually plugged into the router (cat 5 internet cables).  All the computers/devices that connect to the router via wifi do not seem to be restricted at all.   I am thinking this is an issue with the router in that it ONLY seems to apply the Access Restriction rules to those devices that are actually directly connected by hardwire.
    Has any one else noticed this issue for WiFi connected devices?  Access Restrictions do not seem to apply to WiFi connected devices.
    Please help -- I would hate to have to buy another router.

    Are you sure you have enter the correct MAC address or IP address? Wired connections use different MAC and IP addresses then wireless connection...

  • What are the certification books for Business objects Xi developer certifi?

    Hi all,
    i am planning to take up business objects certifications Can anyone tell me the prescribes books for the certification? i am able to find out the exam codes from persaon vue but no the Prescribed books can anyone pls guide me on this!!
    Thanks
    Pooja

    Hi Pooja,
    I am also looking for Business Objects certification materials. but didn't find any where.
    If you find, please can you advice me on this.
    very appreciated on your help.
    Many Thanks
    Sree

  • CCMS for Business Objects

    All,
    I am trying to configure to ccms setup for  Business Objects XI 3.1 but could not find right documentation specific to BO.
    We need to monitor Tomcat, some of Bo server and also file systems.
    Have anyone done anything with CCMS on BO ?
    Thanks in Advance for the help !
    Raj

    I don't know about CCMS and BO.
    But if you need to monitor BO, you can use the probes.
    You have to create an automation process yourself.
    I created a console app in .net that runs the probes every 15 minutes and sends me an email everytime there 's an error.
    The probes are really easy to use and install.
    The output files can be used with TIvoli or other monitoring tool.
    Here is the link: SAP Research - Productized Prototypes

  • Supported Operating Systems for Business Objects Enterprise

    I am unable to locate information on the supported operating systems platforms for Business Objects Enterprise version (11.0.0.1775) build (1775) within the BO support documentation.
    I want to know if this version of BO is supported on AIX (xlC.aix50.rte version 8)?

    Not sure which exact version is 11.0.0.1775, but it's definitively BO XI release 1, so I guess this document is your best guide:
    http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a03454bd-a03e-2b10-98b7-fc11486d87bf
    And it mentions AIX 5.1 as a minimum so you may be out of luck...

Maybe you are looking for