Access Restrictions for Time?

I keep trying to set access restrictions for my wrt54g router for time. There is no 12 for time so I'm selecting 11:55 pm to 6am but I keep getting an error message of, "end time must be bigger then begin time." I get this no matter if I select 9pm, 10pm, etc.........
Any ideas?

You cannot choose a time frame through midnight. You have to split it in two rules, one before midnight and one after, i.e. choose 12am to 6am and 9pm to 11:55 pm.

Similar Messages

WRT54GS Access Restriction for WiFi Connected Devices

I have the WRT54GS v4 running with the latest Firmware Version: v1.06.3 -- I am attempting to add Access Restrictions for a few MAC addresses and IP addresses (my kids iPod Touch and laptop).
I am simply wanting to deny total internet access from 9pm to 7am. I have gotten it to work but ONLY for computers that are actually plugged into the router (cat 5 internet cables). All the computers/devices that connect to the router via wifi do not seem to be restricted at all. I am thinking this is an issue with the router in that it ONLY seems to apply the Access Restriction rules to those devices that are actually directly connected by hardwire.
Has any one else noticed this issue for WiFi connected devices? Access Restrictions do not seem to apply to WiFi connected devices.
Please help -- I would hate to have to buy another router.

Are you sure you have enter the correct MAC address or IP address? Wired connections use different MAC and IP addresses then wireless connection...

Access restriction for linksys WRV210

Greetings,
how can i make access restriction for more than 1 IP in linksys WRV210????
i dont want to use URL filtring

Hi korkomaz, I hope that answered your inquiry. Moving forward please refer to the link below as these products are now being handled by the Cisco Small Business Support Community.
https://www.myciscocommunity.com/community/smallbizsupport
Thank you.
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Authorization & Access Restriction for Z field

Hello Experts,
I had created a Z field in Sales Quote using KUT. For this Z field few employees should not be able to edit. How can this be achieved through authorizations or is there any other way.
Thanks in advance.
Best Regards,
Lakshith

Hello Lakshith,
Check the below screenshot. You can check Field & Actions Tab in Access Management for Business Role. Try restricting at field Level for your custom field.
Regards,
Chandan

Access restriction for PDF generated with Smartform

Hi there,
I am generating a PDF from a Smartform using convert_otf.
What I would like to do is, add restrictions for the generated document just like in Acrobat Professional.
For example:
Printing: yes/no
saving: yes/no
cut, copy paste: yes/no
Is there a way to pass this Parameters to the PDF?
Thanks in advance
Uli

Hello,
check this thread: Mailing PDF Attachment with Password Protected
Otto

Application Access restrict for for a period of time

Hi,
I am using Websphere 5.0 along with IIS 5.x.
My requirement is to restrict users from accessing a web application for a particular time slot (for eg: 10 PM to 5 AM ) everyday.
If the user accesses that website during that time, Websphere needs to redirect the user to a temporary page instead of the home page.
Is there any way to achieve the requirement by configuring the webservers or websphere ?

Yes you can add ACLs with attribute "timeofday"
http://blogs.sun.com/roller/page/meena?entry=access_control_in_sun_java

Access restriction for business objects in same solution

Hi All,
Requirement: I have one single solution with 4 modules. 1 module is common and other 3 are industry specific. When i roll it out to a customer, i what restrictions on Business Objects. So that i can roll out single or combination of modules as per requirement.
Hence the configuration requirement would be as follows:
   We need one core configuration for the entire solution which will have the Common Scope part included in it.
   We need industry wise configuration ( could be business configuration )
   Script level screen restriction.
We tried creating a BAC element with Business Topic and Business Options and tried to link BO's to it. But we are finding a problem with this solution, even a user will be able to change the configuration and get access to a module which he didn't pay for.
Regards,
Rudhra Udayakumar
[email protected]

Hello Rudhra,
If the switches are in the BC every user with access to the BC can switch the modules on and off.
As we do not support the interaction / referenceing between different solutions (at least not in the near future ) you need to put all you need in one solution.
I understand that you want to make a reuse of the Common module somehow.
My suggestion would be
Develop the Common in a Solution Template
Develop each industry specific in an own solution
(Re-)Deploy the Common Solution Template to each of the industry specific solutions
You can then sell the industry specific solution one by one and have only one development source for the Common module.
HTH,
   Horst

User Access restriction for certain infotype

Hi,
We have a requirement from our management that for some specific user we need to give all infotype view access I mean PA20 but excluding payroll data for 14 grade and above.
For this requirement I cannot give grade wise authorization because as per the requirement they can view all the hr related infotype except grade 14 and above our user should not view any payroll related infotype but less than 14 they can view the same.
For this I need to create one object and give it to them but I donu2019t how to find it out?
Can any one guide me?
Thanks
Gudia

Hi,
You can create dynamic action for IT 0008 that will copy grade value to field org.key in IT 0001.
This field can be used in authorization object P_ORGIN.
Then you can specify 2 P_ORGIN objects in the user role:
1. IT - all
Org.key 1-13
2. IT - non-payroll
Ogr.key 14 and above.
Cheers!

WRT160Nv Problems with Access Restrictions for URLS

So I have a need to block some URLs from my network.
I know how to do such but the problem is that the user interface that Linksys provides seems to limit the url field to 22 bytes.
Seems you can only block if you include the complete url "http://www.WebSite.com"
So in my situation I need to block http://www.dailymotion.com but that is 26 bytes and the field on the router GUI will not allow 26 bytes.
Does anyone have ideas how I can about blocking URLs that are longer than 22 bytes?
Does not see there is a firmware upgrade for it either, current installed version is 3.0.02

Is that the firmware that was already in the router or did you update it?
The box said windows xp or better... So I installed Linux!

ABOUT wrt54g 'Access Restriction'

Dear all:
once the duration of rule expired. It won't apply another rule by the time serial.
For example, I set up one of PCs was allowed to access internet between 7:00am~11:55am. This PC could access to internet after 11:55am, even I set another rule for this PC with duration 12:00pm~18:00pm.
Is any solution for my needs.
Beswt Regards
tom
Solved!
Go to Solution.

The Access Restrictions feature allows you to limit Internet access on your network. You can deny access to certain computers, block certain applications and services, and block certain websites by the use of keywords or by the URL at a given time. This feature allows you to customize up to 10 different Internet Access Policies for particular computers, which are identified by their IP or MAC addresses.
Here is the link Implementing Access Restrictions for computers: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20b29e54474a4a17aff594cb659747ea_4041.xml&pid=80&r...

WRT54GS V6 multiple access restrictions

I have setup access restrictions for my kids machine but can only get 1 profile to work.
I would like to have access for then between 6pm and 10pm Monday - Friday and 24 Hrs Saturday & Sunday.
In the profile I have created (that works) is the IP address for my kids machine as well as the MAC address.
Can someone help please.
I can only find help on single policies.
Thanks

Oh, I didn't seem to get it right. You were asking why you can't enable 2 policies at the same time right? (e.g. policy 1 & 2 is selected)
Well, here's the thing, the router will be the one to enable the policy on that specific date. For example, policy 1 is for weekdays and policy 2 is for weekends. Just double-check that the router's time is the same with the pc. The router will be the one to disable policy 1 and enable policy 2 on weekend. When on weekdays it will then disable policy 2 and enable policy 1.
Hope this clears things up!

No Internet with Multiple Access Restrictions

Hi,
I have a WRT54Gv5 and have setup the following Access Restrictions for an Ipod Touch. Having a single AR works fine but adding another kills internet for that user. I am using the MAC filter for that user.
M-F: 6am-7:30am, allow Internet but block MSN.com, live.com and facebook.com
M-Th: 2:45pm-7:30pm, allow all
F-Sa: 6am-8:30pm, allow all
Su: 6am-7:30pm, allow all
I was thinking of using block instead of allow but that would make a lot of block windows (or maybe that is the only solution).
Thanks

Make sure that your router is running on latest firmware.
If not then try to upgrade/re-flash the firmware on your router.
Download the latest firmware from Linksys website and save it on your computer. Open the setup page of the router and upgrade the firmware. After upgrading the firmware on your router, reset the router and reconfigure it.

WRT160N V3 router ignores MAC address Access Restrictions, Filtering policies

I have added a list of 2 MAC addresses in the Access Restrictions for the access policy #1 and enabled it with Allow policy. But one of my PC's MAC address which is not on the list of access policy #1 still can access the internet and ping websites. I tried to add a Deny policy in 2nd policy for this PC MAC address and then it can not ping websites anymore.
The problem is why my PC with a MAC address not on the list of Allow Policy #1 can access the internet? It seems the router Access Restrictions don't work well.

I've already added Deny rule (blocking all LAN IPs) to all computers accessing my network in Access Restrictions Policy #1 but I leave one PC left to access the router web configuration.
Then in Acess Restrictions Policy #2, I added an Allow rule to one of my PC's MAC addresses (and its IP too) but the PC can not access internet and ping websites. It looks like the allow rule in policy #2 doesn't overwrite the Deny rule in Policy #1.

Prompt @ Universe - Access restrictions

Hi all,
Can we apply the Access restriction for Universe level prompts?
Requirement :have 2 prompts at Universe level based on user i need to restrict any one of the prompt at report level
Best regards,
reddeppa k

Hello,
If I understood you clearly what you want is if you have two filters defined at universe level e.g. Filter1 & Filter2 so you want user1 to see Filter1 and User2 to see Filter2.
You will not be able to restrict filter like this but you can: -
1. Create a new object with same definition as per your filter and then using "Manage access restriction" set restriction for these objects.
2. If you have these user accounts in DB, you can use @variable ('BOUSER') in your where clause and direclty restrict the data fetched from database.
Thanks,
Vivek

WRV200 Access Restriction on all ports for a time period?

I have a system that needs to be restricted to only having internet access for a small window each day. I have been looking at the Access Restriciton tools for htis but it looks like I would need to block each possible port with its own policy. This seems very inefficient and complex. Is there a way to make a rule that blocks ALL ports for a time period?
Thanks!

Under Firewall>Access Restriction when you are creating an Access Policy under Blocked Services you can select TCP, UDP, or IP. If you select IP it will block everything instead of a specific port. You will have to create a rule for each IP on your network that you do not wish to have access outside of your selected window.

Access Restrictions for Time?

Similar Messages

Maybe you are looking for