Access Rights Error

I have been using LP 7 for a year and a half and have just encountered a problem for the first time. When trying to add fades to tracks in a file and when trying to bounce audio, I get an error message telling me that I have insufficient access rights to perform these operations. What is that? Any suggestions on how to get my rights back (other than hire a lawyer and petition congress)?
Thanks.

Repair permissions on they drive you are recording to.
Or
Get info on the folder and be change permissions to read/write and apply to all enclosed items.
Or both

Similar Messages

How do I fix an access rights error when launching Image Processor in Adobe Bridge CC?

Often when I am working on files and want to batch process Jpegs for clients I get an error message from Image Processor. It will state "I am unable to create a file in this folder. Please check your access rights to this location ...."
I have cleared cache and up'd my history levels. I checked to make sure the files were not locked and read/write was enabled. I am not sure why this error keeps occurring. I am using Adobe Photoshop CC 2014 (2014.2.2 release) with Adobe Bridge CC (6.1.0.115)

It's an endless circle.
See if these instructions help: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

Two Accounts sharing iPhoto library - iPod access rights error solution

I followed the advice given in http://support.apple.com/kb/HT1198 to share a single iPhoto library on an external drive between two users. It worked well.
...until both my wife and I tried to connect iPods while in our individual logins and attempted to sync photos from an album in iPhoto.
Mine worked, but my wife's responded with, "The iPod "name" cannot be synced. You do not have enough access privileges for this operation."
Having seen this thread;
http://discussions.apple.com/thread.jspa?messageID=4872555&#4872555
I realized that the iPod iPhoto cache, made visible by right-clicking the iPhoto Library and Showing Package Contents, was specific to my iTunes library and not my wife's. I could sync photos, but my wife could not.
I copied the iPhoto cache to a folder with my name on it, deleted the iPod iPhoto cache, and started iTunes under my wife's login. After setting the album she wanted to import, her photos synced without error.
Then I copied the iPod iPhoto cache to a folder with my wife's name.
I leave set to work for her and then I swap out her iPod iPhoto Cache and copy in my when I want to add new photos. In the meantime I deselect iPhoto sync in my iTunes until such time as I want to alter the image collection on my iPod.
I tried to make an animator script, but didn't have much success with the cache being package content.

I copied the iPhoto cache to a folder with my name on it, deleted the iPod iPhoto cache, and started iTunes under my wife's login. After setting the album she wanted to import, her photos synced without error.
should have said..
I copied the iPod iPhoto cache to a folder with my name on it, deleted the iPod iPhoto cache, and started iTunes under my wife's login. After setting the album she wanted to import, her photos synced without error.

You do not have sufficient access rights, pls help

Hi folks,
I'm getting the "You do not have sufficient access rights" error accessing the Identity System Console. The same admin account can access User/Group/Org Manager screen, however, for some reasons user and group searches return no results. This is the second OIS install against the same ldap dir (ovd to sun 6.3), so I had to specify Id server was not the first one to avoid profile conflict with oblix DBAgents. The admin user had been selected during prev install, and exists under o=Oblix in both cn=Web Masters and cn=Directory Administrators.
I have LDAPMaxNoOfRetries set to the number of dir servers +1 in all globalparams.xml on OIS. I also can modify ldap dir via both ldapmodify and ldap browser binding to OVD as same user. Turning the TRACE on didn't showed any errors except for the following:
DB_RUNTIME WARNING 0x00000504 ldap_config_db.cpp:187 "Exception during DB runtime code" function^LDAPConfigDB::Open() status^17
DB_RUNTIME WARNING 0x00000504 ldap_config_db.cpp:355 "Exception during DB runtime code" function^LDAPConfigDB::ReadOblixDBConfig()status^17
SCHEDULER_FRAMEWORK ERROR 0x00000501 ../obschedulerthread.cpp:316 "ObError exception caught" ObScheduledTaskLiaison::LoadTasks^ObWFScheduledTaskLiaison
PPP INFO 0x000008C7 obeventcatalog.cpp:183
Cannot find the action
function^ObEventCatalog::GetActionEntry2Modify()
actionName^front_page_admin_klogin_post
APP_BASE WARNING 0x00000833 oblixbasecommon2.cpp:1235
Login failed
Error^You do not have sufficient access rights
numLoginFailures^1
There's nothing in the ldap logs either. The only warning I get per that user is in the ovd log:
DoSManager: Found unbound connection from active ip addresses
DoSManager: Found unbound connection from active users
The Oracle Support is clueless, please help.
Thank you, Roman

Hi Vinod,
Thanks for the post. OK, if I got it right, I have two entries under obcontainerId=DBAgents for each of my primary Id servers. For the one I currently use, I have this towards the bottom:
obname=oblixConfig-OIS_mdi-oamlx-3
obname=default-OIS_mdi-oamlx-3
Both entries have obdbusedby set to OIS_mdi-oamlx-3 which is my OIS id. The obsearchbasestr is different: o=Oblix,o=paychex inc for the oblixConfig, and o=paychex inc,c=us for the default one. Is that's the way it should be?
Thanks Roman
P.S: I've noticed I get same error accessing My profile under User Manager.

Problem with orcladmin access rights

We've successfully installed an OAM/OIM platform with Identity Server & Access Server running on one box; WebPass, Policy Manager and WebGate running on Tomcat-2.0 on another box. All screens are coming up but we get access rights errors when trying to add a user or group. The exact error message is 'You do not have sufficient access rights'.
How can we reconfigure orcladmin so it has rights to add users and groups in Identity Administration?

You would need to use the 'Create User' Workflow to create a user from Identity System.
Refer:
http://download.oracle.com/docs/cd/B28196_01/idmanage.1014/b25343/workflow.htm

Insufficient Access Rights when trying to modify send as permissions on a public folder

Where I work, we have 2 mailbox database servers and 2 cas servers on Exchange 2010, upgraded from Exchange 2003. We are finding that when trying to grant a user send as rights to a publlic folder we are getting an Insufficient Access Rights error. The
bizzare thing is for one particluar folder we can amend the send as rights with no issue on one of the cas servers but not the other cas or either db servers.
You would have thought if it was a user permissions issue i.e the adminsitrator not having sufficent rights it would fail on every server and likewise if it was a problem with the folder itself, why is it working on one of the cas servers? Also on
the one server this particluar folder does allow us to amend the rights, when we try to amend others we get the same error
If anyone has come accross this before and knows a fix please share it.
Thanks

Hi,
Please check the ownership of the affected public folder to make sure it points to the right server.
Here is a similar thread which may help you, please following the suggests in this thread to check result.
https://social.technet.microsoft.com/Forums/office/en-US/0960b944-82b2-42f1-b438-a7d57b7ab783/insuffaccessrights?forum=exchangesvrgenerallegacy
Best regards,
Belinda Ma
TechNet Community Support

Random songs in my music library will not play with an error message "computer does not have access rights" but this is not true. I do, and when I re-type the password, it tells me I already have access rights. How do I fix this?

When I try to play songs from itunes, I get an error message that my computer is not authorized. My songs have all played in the past. This is something new. I verified my computer is authorized, and when I try to re-enter the password, it tells me that I am already authorized. Makes no sense at all. It's an endless circle. Also, my shuffle will not sync due to access rights denied. I did nothing new, I always take the updates. My shuffle and compter are the same, no changes. Everything is verified in my itunes account. For some reason, it is blocking me from half of my music. Help!

It's an endless circle.
See if these instructions help: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

Error while configuring SSL in OID 11g - LDAP 50 Insufficient Access rights

HI,
I am trying to configure SSL in OID 11g.As per the doc http://download.oracle.com/docs/cd/E12839_01/oid.1111/e10029/ssl.htm#CBHGBGAF ,i tried creating a Self-Signed Wallte using Fusion Middleware control,But i am getting an error LDAP 50: Insufficient access rights".I logged into Fusion Middle Ware control as Weblogic user.Is anybody faced this issue?.Thanks in advance.

I am not sure how you tried, but I would recommend to do the following...
1. Add the 'user1' to "OU=Franchisees,ou=People,dc=company,dc=com"
2. Delete the 'user1' from 'OU=Internal,ou=People,dc=company,dc=com'

Keep Receiving: Error is: 'Insufficient access rights to perform the operation' When running script

Hello. I have a powershell script I run in our domain to disable AD accounts. Part of that also removes the users from all AD groups. That part of my script however keeps throwing up this Error is: 'Insufficient access rights to perform the operation'
error.
Now from our Exchange server if I run this script with powershell, things work fine. But running it on the domain controller is when I get this error. Thoughts?

Thanks Anna!
I was able to add this code below in to the script where it kept erroring out and it then worked. I had to point it to a different DC then it was running on.
–Server comp1.test.server.com
Thanks again!

Database create error due to folder access right.

I have an application which will create a SQL database(using CREATE DATABASE) and the database files are supposed to be placed in c:\program files\myApp\data\myDatabase.mdf
However, when I try to do so, I get the following error:
System.ApplicationException: System.Data.SqlClient.SqlException: CREATE DATABASE failed. Some file names listed could not be created. Check related errors.CREATE FILE encountered operating system error 5(Access Denied) while attempting to open or create the physical file 'C:\Program Files\myApp\data\myDatabase.mdf'.
My window login already have administrator role.
The problem can be solved if I manually add full access right to my login in window exploder. However, how can I do this programmatically? Or what is the proper way to create database located under my application folder?

I get this error ("error 5(Access is denied) while attempting to open or create the physical file...") under the following circumstances:
1) Using SSE
2) create a database
3) Attach to it with SQL Server Studio
4) Detach
5) Attach again -- I then get the error.
I tried stopping and restarting the server - no success. I can recreate the database and get my one-shot access again so, at this point, I'm lost.

Access denied error while writing a file to the file system - myfileupload.saveas() throws system.unauthorizedexception

hi,
as part of my requirement , i have to perform read and write operations of few files [ using the file upload control in my custom visual web part] and on submit button click.
but while writing these files - with the help of fileupload control - and when i use myfileupload.saveas(mylocation);
- i am saving these files into my D:\ drive of my server , where i am executing my code -, am getting access denied error.
it throws system.unauthorizedexception.
i have given full control on that folder where i was trying to store my attached files. and also after following asp.net forums,
i have added iusr group added and performed all those steps such that, the file is saved in my D:\ drive.
but unfortunately that didnt happen.
also
a) i am trying the code with runwithelevatedprivileges(delegate() ) code
b) shared the drive within the d :drive where i want o save the files.
c) given the full privieleges for the app pool identity- in my case , its
network service.
the other strange thing is that, the same code works perfectly in other machine, where the same sp, vs 2012 etc were installed .
would like to know, any other changes/ steps i need to make it on this server, where i am getting the error.
help is appreciated!

vishnuS1984 wrote:
Hi Friends,
I have gone through scores of examples and i am failing to understand the right thing to be done to copy a file from one directory to another. Here is my class...So let's see... C:\GetMe1 is a directory on your machine, right? And this is what you are doing with that directory:
public static void copyFiles(File src, File dest) throws IOException
// dest is a 'File' object but represents the C:\GetMe1 directory, right?
fout = new FileOutputStream (dest);If it's a directory, where in your code are you appending the source file name to the path, before trying to open an output stream on it? You're not.
BTW, this is awful:
catch (IOException e)
IOException wrapper = new IOException("copyFiles: Unable to copy file: " +
src.getAbsolutePath() + "to" + dest.getAbsolutePath()+".");
wrapper.initCause(e);
wrapper.setStackTrace(e.getStackTrace());
throw wrapper;
}1) You're hiding the original IOException and replacing it with your own? For what good purpose?
2) Even if you had a good reason to do that, this would be simpler and better:
throw new IOException("your custom message goes here", e);
rather than explicitly invokign initCause and setStackTrace. Yuck!

Access denied error while trying to install graphics drivers

Hello,
I have a new toshiba laptop P70-A. I have installed windows 7 and the pc was working excellent up until now. Noticed yesterday that the nvidia automated system failed to install the new update. When I tried to install the new driver manually, even from the
device manager, I got the access denied message.
A day now wasted reading all the possible causes and solutions but with no luck. Read all the forums and all the posts, tried almost everything. Below youll find everything I tried as a solution and failed.
1.Disabled UAC
2.Enabled the administrator account and trying to take control from there
3.Run the subinacl and the reset.cmd
4.Tried manually to take control the folder windows (and access denied while changing the rights)
5. Scanned the system with everything there is available ( Kaspersky, MalwareBytes, RegCurePro, Tuneup Utilities, CCleaner) The system came out clean.
6. Tried restoring the system to an earlier time (got again access denied error code 0x80070005)
7. Checked all the group policies (all seem to be fine)
8. Run a script to take immediate ownership over all of C:
TAKEOWN /A /F C:
then the next one
TAKEOWN /F C:
9. With subinacl I run all the above scripts... (still nothing changed)
@echo off
title Resetting ACLs...
echo.
echo Determine whether we are on an 32 or 64 bit machine
echo.
if "%PROCESSOR_ARCHITECTURE%"=="x86" if "%PROCESSOR_ARCHITEW6432%"=="" goto x86
set ProgramFilesPath=%ProgramFiles(x86)%
goto startResetting
:x86
set ProgramFilesPath=%ProgramFiles%
:startResetting
echo.
cd /d "%ProgramFilesPath%\Windows Resource Kits\Tools"
echo.
echo Resetting ACLs...
echo (this may take several minutes to complete)
echo.
echo IMPORTANT NOTE: For this script to run correctly, you must change
echo the values named Athena to be the Windows user account that
echo you are logged in with.
echo.
echo ==========================================================================
echo.
echo.
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f /grant=restricted=r /grant=Athena=f /setowner=administrators > %temp%\subinacl_output.txt
echo.
echo.
subinacl /keyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f /grant=restricted=r /grant=Athena=f /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f /grant=users=r /grant=everyone=r /grant=restricted=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /keyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f /grant=users=r /grant=everyone=r /grant=restricted=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f /grant=users=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /keyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f /grant=users=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
echo System Drive...
subinacl /subdirectories %ProgramFilesPath%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt
echo.
echo.
echo Windows Directory...
subinacl /subdirectories %windir%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt
echo.
echo.
echo ==========================================================================
echo.
echo FINISHED.
echo.
echo Press any key to exit . . .
pause >NUL
Im frustrated really... ANY help at all would be really appreciated.
Thanks in Advance and sorry for the long post
Athena

Hello,
Thanks for the replies, i much appreciate it. I tried all of the above with no luck again. Safe mode allows me though to install drivers but thats reverting the moment im entering windows. Im always running commands and programs as a administrator or in
the Admin enabled account.
It seems the problem is solved today. Via tune up utilities I disabled most of the startup programs and services and it seems that 1 service is causing this issue. Although I havent played much with the disabled services but 3 remain to be checked. One of
the three is causing this.
Thanks again guys and Ill keep you posted about the soft. conflict.
Athena

EFS Encrypted Files over home workgroup network via WebDAV avoiding Active Directory fixing Access Denied errors

This is for information to help others
KEYWORDS:
- Sharing EFS encrypted files over a personal lan wlan wifi ap network
- Access denied on create new file / new fold on encrypted EFS network file share remote mapped folder
- transfer encryption keys / certificates
- set trusted delegation for user + computer for EFS encrypted files via
Kerberos
- Windows Active Directory vs network file share
- Setting up WinDAV server on Windows 7 Pro / Ultimate
It has been a long painful road to discover this information.
I hope sharing it helps you.
Using EFS on Windows 7 pro / ultimate is easy and works great. See
here and
here
So too is opening + editing encrypted files over a peer-to-peer Windows 7 network.
HOWEVER, creating a new file / new folder over a peer-to-peer Windows 7 network
won't work (unless you follow below steps).
Typically, it is only discovered as an issue when a home user wants to use synchronisation software between their home computers which happens to have a few folders encrypted using windows EFS. I had this issue trying to use GoodSync.
Typically an "Access Denied" error messages is thrown when a \\clientpc tries to create new folder / new file in an encrypted folder on a remote file share \\fileserver.
Why such a EFS drama when a network is involved?
Assume a home peer-to-peer network with 2pc: \\fileserver and \\clientpc
When a \\clientpc tries to create a new file or new folder on a \\fileserver (remote computer) it fails. In a terribly simplified explanation it is because the process on \\fileserver that is answering the network requests is a process working for a user on
another machine (\\clientpc) and that \\fileserver process doesn't have access to an encryption certificate (as it isn't a user). Active Directory gets around this by using kerberos so the process can impersonate a \\fileserver user and then use their certificate
(on behalf of the clienpc's data request).
This behaviour is confusing, as a \\clientpc can open or edit an existing efs encrypted file or folder, just can't create a new file or folder. The reason editing + opening an encrypted file over a network file share is possible is because the encrypted
file / folder already has an encryption certificate, so it is clear which certificate is required to open/edit the file. Creating a new file/folder requires a certificate to be assigned and a process doesn't have a profile or certificates assigned.
Solutions
There are two main approaches to solve this:
     1) SOLVE by setting up an Active Directory (efs files accessed through file shares)
          EFS operations occur on the computer storing the files.
          EFS files are decrypted then transmitted in plaintext to the client's computer
          This makes use of kerberos to impersonate a local user (and use their certificate for encrypt + decrypt)
     2) SOLVE by setting up WebDAV (efs files accessed through web folders)
           EFS operations occur on the client's local computer
           EFS files remain encrypted during transmission to the client's local computer where it is decrypted
           This avoids active directory domains, roaming or remote user profiles and having to be trusted for delegation.
           BUT it is a pain to set up, and most online WebDAV server setup sources are not for home peer-to-peer networks or contain details on how to setup WebDAV for EFS file provision
         READ BELOW as this does
Create new encrypted file / folder on a network file share - via Active Directory
It is easily possible to sort this out on a domain based (corporate) active directory network. It is well documented. See
here. However, the problem is on a normal Windows 7 install (ie home peer-to-peer) to set up the server as part of an active directory domain is complicated, it is time consuming it is bulky, adds burden to operation of \\fileserver computer
and adds network complexity, and is generally a pain for a home user. Don't. Use a WebDAV.
Although this info is NOT for setting up EFS on an active directory domain [server],
for those interested here is the gist:
Use the Active Directory Users and Computers snap-in to configure delegation options for both users and computers. To trust a computer for delegation, open the computer’s Properties sheet and select Trusted for delegation. To allow a user
account to be delegated, open the user’s Properties sheet. On the Account tab, under Account Options, clear the The account is sensitive and cannot be delegated check box. Do not select The account is trusted for delegation. This property is not used with
EFS.
NB: decrypted data is transmitted over the network in plaintext so reduce risk by enabling IP Security to use Encapsulating Security Payload (ESP)—which will encrypt transmitted data,
Create new encrypted file / folder on a network file share - via WebDAV
For home users it is possible to make it all work.
Even better, the functionality is built into windows (pro + ultimate) so you don't need any external software and it doesn't cost anything. However, there are a few hotfixes you have to apply to make it work (see below).
Setting up a wifi AP (for those less technical):
   a) START ... CMD
   b) type (no quotes): "netsh wlan set hostednetwork mode=allow ssid=MyPersonalWifi key=12345 keyUsage=persistent"
   c) type (no quotes): "netsh wlan start hostednetwork"
Set up a WebDAV server on Windows 7 Pro / Ultimate
-----ON THE FILESERVER------
   1 click START and type "Turn Windows Features On or Off" and open the link
       a) scroll down to "Internet Information Services" and expand it.
       b) put a tick in: "Web Management Tools" \ "IIS Management Console"
       c) put a tick in: "World Wide Web Services" \ "Common HTTP Features" \ "WebDAV Publishing"
       d) put a tick in: "World Wide Web Services" \ "Security" \ "Basic Authentication"
       e) put a tick in: "World Wide Web Services" \ "Security" \ "Windows Authentication"
       f) click ok
       g) run HOTFIX - ONLY if NOT running Windows 7 / windows 8
KB892211 here ONLY for XP + Server 2003 (made in 2005)
KB907306 here ONLY for Vista, XP, Server 2008, Server 2003 (made in 2007)
2 Click START and type "Internet Information Services (IIS) Manager"
3 in IIS, on the left under "connections" click your computer, then click "WebDAV Authoring Rules", then click "Open Feature"
       a) on the right side, under Actions, click "Enable WebDAV"
4 in IIS, on the left under "connections" click your computer, then click "Authentication", then click "Open Feature"
       a) on the "Anonymous Authentication" and click "Disable"
       b) on the "Windows Authentication" and click "Enable"
      NB: Some Win 7 will not connect to a webDAV user using Basic Authentication.
        It can be by changing registry key:
           [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WebClient\Parameters]
           BasicAuthLevel=2
       c) on the "Windows Authentication" click "Advanced Settings"
           set Extended Protection to "Required"
       NB: Extended protection enhances the windows authentication with 2 security mechanisms to reduce "man in the middle" attacks
5 in IIS, on the left under "connections" click your computer, then click "Authorization Rules", then click "Open Feature"
       a) on the right side, under Actions, click "Add Allow Rule"
       b) set this to "all users". This will control who can view the "Default Site" through a web browser
       NB: It is possible to specify a group (eg Administrators is popular) or a user account. However, if not set to "all users" this will require the specified group/user account to be used for logged in with on the
clientpc.
       NB: Any user account specified here has to exist on the server. It has a bug in that it usernames specified here are not validated on input.
6 in IIS, on the left under "connections" click your computer, then click "Directory Browsing", then click "Open Feature"
       a) on the right side, under Actions, click "Enable"
HOTFIX - double escaping
7 in IIS, on the left under "connections" click your computer, then click "Request Filtering", then click "Open Feature"
       a) on the right side, under Actions, click "Edit Feature Settings"
       b) tick the box "Allow double escaping"
     *THIS IS VERY IMPORTANT* if your filenames or foldernames contain characters like "+" or "&"
     These folders will appears blank with no subdirectories, or these files will not be readable unless this is ticked
     This is safe btw. Unchecked (default) it filters out requests that might possibly be misinterpreted by buggy code (eg double decode or build url's via string-concat without proper encoding). But any bug would need to be in IIS basic
file serving and this has been rigorously tested by microsoft, so very unlikely. Its safe to "Allow double escaping".
8 in IIS, on the left under "connections" right click "Default Web Site", then click "Add Virtual Directory"
       a) set the Alias to something sensible eg "D_Drive", set the physical path
       b) it is essential you click "connect as" and set
this to a local user (on fileserver),
       if left as "pass through authentication" a client won't be able to create a new file or folder in an encrypted efs folder (on fileserver)
             NB: the user account selected here must have the required EFS certificates installed.
                        See
here and
here
        NB: Sharing the root of a drive as an active directory (eg D:\ as "D_Drive") often can't be opened on clientpcs.
      This is due to windows setting all drive roots as hidden "administrative shares". Grrr.
       The work around is on the \\fileserver create an NTFS symbollic link
          e.g. to share the entire contents of "D:\",
                on fileserver browse to site path (iis default this to c:\inetpub\wwwroot)
                in cmd in this folder create an NTFS symbolic link to "D:\"
                so in cmd type "cd c:\inetpub\wwwroot"
                then in cmd type "mklink /D D_Drive D:\"
        NB: WebDAV will open this using a \\fileserver local user account, so double check local NTFS permissions for the local account (clients will login using)
         NB: If clientpc can see files but gets error on opening them, on clientpc click START, type "Manage Network Passwords", delete any "windows credentials" for the fileserver being used, restart
clientpc
9 in IIS, on the left under "connections" click on "WebDAV Authoring Rules", then click "Open Feature"
       a) click "Add authoring rules". Control access to this folder by selecting "all users" or "specified groups" or "specified users", then control whether they can read/write/source
       b) if some exist review existing allow or deny.
           Take care to not only review the "allow access to" settings
           but also review "permissions" (read/write/source)
       NB: this can be set here for all added virtual directories, or can be set under each virtual directory
10 Open your firewall software and/or your router. Make an exception for port 80 and 443
       a) In Windows Firewall with Advanced Security click Inbound Rules, click New Rule
             choose Port, enter "80, 443" (no speech marks), follow through to completion. Repeat for outbound.
          NB: take care over your choice to untick "Public", this can cause issues if no gateway is specified on the network (ie computer-to-computer with no router). See "Other problems+fixes"
below, specifically "Cant find server due to network location"
       b) Repeat firewall exceptions on each client computer you expect to access the webDAV web folders on
HOTFIX - MAJOR ISSUE - fix KB959439
11 To fully understand this read "WebDAV HOTFIX: RAW DATA TRANSFERS" below
      a) On Windows 7 you need only change one tiny registry value:
           - click START, type "regedit", open link
           -browse to [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\MRxDAV\Parameters]
           -on the EDIT menu click NEW, then click DWORD Value
           -Type "DisableEFSOnWebDav" to name it (no speech marks)
           -on the EDIT menu, click MODIFY, type 1, then click OK
           -You MUST now restart this computer for the registry change to take effect.
      b) On Windows Server 2008 / Vista / XP you'll FIRST need to
download Windows6.0-KB959439 here. Then do the above step.
         NB microsoft will ask for your email. They don't care about licence key legality, it is more to keep you updated if they modify that hotfix
12 To test on local machine (eg \\fileserver) and deliberately bypass the firewall.
      a) make sure WebClient Service is running
            (click START, type "services" and open, scroll down to WebClient and check its status)
      b) Open your internet software. Go to address "http://localhost:80" or "http://localhost:80"
            It should show the default "IIS7" image.
            If not, as firewall and port blocking are bypassed (using localhost) it must be a webDAV server setting. Check "Authorization Rules" are set to "Allow All Users"
      c) for one of the "virtual directories" you added (8), add its "alias" onto "http://localhost/"
                e.g. http://localhost/D_drive
            If nothing is listed, check "Directory Browsing" is enabled
13 To test on local machine or a networked client and deliberately try and access through the firewall or port opening of your router.
      a) make sure WebClient Service is running
            (click START, type "services" and open, scroll down to WebClient and check its status)
      b) open your internet software. Go to address "http://<computer>:80" or "http://<computer>:80".
              eg if your server's computer name is "fileserver" go to "http://fileserver:80"
              It should show the default "IIS7" image. If not, check firewall and port blocking.
              Any issue ie if (12) works but (13) doesn't, will indicate a possible firewall issue or router port blocking issue.
     c) for one of the "virtual directories" you added (8), add its "alias" onto "http://<computername>:80/"
               eg if alias is "C_driver" and your server's computer name is "fileserver" go to "http://fileserver:80/C_drive"
               A directory listing of files should appear.
--- ON EACH CLIENT ----
HOTFIX - improve upload + download speeds
14 Click START and type "Internet Options" and open the link
      a) click the "Connections" tab at the top
      b) click the "LAN Settings" button at the bottom right
      c) untick "Automatically detect settings"
HOTFIX - remove 50mb file limit
15 On Windows 7 you need only change one tiny registry value:
      a) click START, type "regedit", open link
    b) browse to [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WebClient\Parameters]
       c) click on "FileSizeLimitInBytes"
       d) on the EDIT menu, click MODIFY, type "ffffffff", then click OK (no quotes)
HOTFIX - remove prompt for user+pass on opening an office or pdf document via WebDAV
16 On each clientpc click START, type "Internet Options" and open it
         a) click on "Security" (top) and then "Custom level" (bottom)
         b) scroll right to the bottom and under "User Authentication" select "Automatic logon with current username and password"
         SUCH an easy fix. SUCH an annoying problem on a clientpc
   NB: this is only an issue if the file is opened through windows explorer. If opened through the "open" dialogue of the software itself, it doesn't happen. This is as a WebDAV mapped drive is consdered a "web folder" by windows
explorer.
TEST SETUP
17 On the client use the normal "map network drive"
            e.g. server= "http://fileserver:80/C_drive", tick reconnect at logon
            e.g. CMD: net use * "http://fileserver:80/C_drive"
         If it doens't work check "WebDAV Authoring Rules" and check NTFS permissions for these folders. Check that on the filserver the elected impersonation user that the client is logging in with (clientpc
"manage network passwords") has NTFS permissions.
18 Test that EFS is now working over the network
       a) On a clientpc, map network drive to http://fileserver/
       b) navigate to a folder you know on the \\flieserver is encrypted with EFS
       c) create a new folder, create a new file.
           IF it throws an error, check carefully you mapped to the WebDAV and not file share
              i.e. mapped to "http://fileserver" not "\\fileserver"
           Check that on clientpc the required efs certificate is installed. Then check carefully on clientpc what user account you specified during the map drive process. Then check on the \\fileserver this
account exists and has the required EFS certificate installed for use. If necessary, on clientpc click START, type "Manage Network Passwords" and delete the windows credentials currently in the vault.
       d) on clientpc (through a webDAV mapped folder) open an encrypted file, edit it, save it, close it. On the \\fileserver now check that file is readable and not gobble-de-goup
       e) on clientpc copy an encrypted efs file into a folder (a webDAV mapped folder) you know is not encrypted on \\fileserver. Now check on the \\fileserver computer that the file is readable and not gobble-de-goup (ie the
clientpc decrypted it then copied it).
        If this fails, it is likely one in IIS setting on fileserver one of the shared virtual directories is set to: "pass through authentication" when it should be set to "connect as"
        If this is not readable check step (11) and that you restarted the \\fileserver computer.
19 Test that clients don't get the VERY annoying prompt when opening an Office or PDF doc
      a) on clientpc in windows explorer browse to a mapped folder you know is encrypted and open an office file and then PDF.
            If a prompt for user+pass then check hotfix (16)
20 Consider setting up a recycling bin for this mapped drive, so files are sent to recycling bin not permanently deleted
      a) see the last comment at the very bottom of
this page:
Points to consider:
   - NB: WebDAV runs on \\fileserver under a local user account, so double check local NTFS permissions for that local account and adjust file permissions accordingly. If the local account doesn't have permission, the webDAV / web folder share won't
either.
- CONSIDER: IP Security (IPSec) or Secure Sockets Layer (SSL) to protect files during transport.
MORE INFO: HOTFIX: RAW DATA TRANSFERS
More info on step (11) above.
Because files remain encrypted during the file transfer and are decrypted by EFS locally, both uploads to and downloads from Web folders are raw data transfers. This is an advantage as if data is intercepted it is useless. This is a massive disadvantage as
it can cause unexpected results. IT MUST BE FIXED or you could be in deep deep water!
Consider using \\clientpc to access a webfolder on \\fileserver and copying an encrypted EFS file (over the network) to a web folder on \\fileserver that is not encrypted.
Doing this locally would automatically decrypt the file first then copy the decrypted file to the non-encrypted folder.
Doing this over the network to a web folder will copy the raw data, ie skip the decryption stage and result in the encrypted EFS file being raw copied to the non-encrypted folder. When viewed locally this file will not be recognised as encrypted (no encryption
file flag, not green in windows explorer) but it will be un-readable as its contents are still encrypted. It is now not possible to locally read this file. It can only be viewed on the \\clientpc
There is a fix:
      It is implimented above, see (11) above
      Microsoft's support page on this is excellent and short. Read "problem description" of "this microsoft webpage"
Other problems + fixes
PROBLEM: Can't find server due to network location.
     This one took me a long time to track down to "network location".
     Win 7 uses network locations "Home" / "Work" / "Public".
     If no gateway is specified in the IP address, the network is set to '"unidentified" and so receives "Public" settings.
     This is a disaster for remote file share access as typically "network discovery" and "file sharing" are disabled under "Public"
     FIX = either set IP address manually and specify a gateway
     FIX = or force "unidentified" network locations to assume "home" or "work" settings -
read here or
here
     FIX = or change the "Public" "advanced network settings" to turn on "network discovery" and "file sharing" and "Password Protected Sharing". This is safe as it will require a windows
login to gain file access.
PROBLEM: Deleting files on network drive permanently deletes them, there is no recycling bin
       By changing the location of "My Contacts" or similar to the root directory of your mapped drive, it will be added to recycling bin locations
      Read
here (i've posted a batch script to automatically make the required reg files)
I really hope this helps people. I hope the keywords + long title give it the best chance of being picked up in web searches.

What probably happens is that processes are using those mounts. And that those processes are not killed before the mounts are unmounted. Is there anything that uses those mounts?

Sql agent job getting file access denied error

I'm not sure if this question belongs in this forum. Please move it if you want to.
Here is my question. I have an ssis package that is running into an error at the file system task trying to move a file. The package is deployed to the catalog and I am running the package using the stored procedure
[SSISDB].[catalog].[start_execution] @execution_id
When I execute this stored proc in Management Studio while logged in under a sysadmin, everything works fine. But when I call the same TQL in SQL Agent job, I get a file access denied error. This has something to do with the id that is getting used
to run the package and I am not sure how to track that down. Any help would be appreciated.
I've check the windows permission on both the id that is running the SQL Agent and SQL SSIS Service. Both seem to have the right windows permission.

Please see:
http://support.microsoft.com/kb/918760

Access denied error when Loading document library for "contribute" users : Unknown SPRequest error occurred. More information: 0x80070005

Hi,
We are facing a very strange issue on a SharePoint Publishing portal. Domain users (contribute level access) have access to document libraries under specific sub sites. Every morning if they try to access the document library pages, users complain about "Access Denied" issue on document library page. But if a SP Farm admin account login on site, and browse to document library page, access denied issue seems to disappear for end users also. For whole day it works fine. But next day access denied error occurs again. I am not sure why this is happening. I have looked into Event Log and SharePoint Logs, found following information useful, but not sure what to do next.
Please help.
Event log Details:
Server: WFE01
Event Type: Error
Event Source: Office SharePoint Server
Event Category: Publishing
Event ID: 5169
Date:  17/11/2009
Time:  07:47:31
User:  N/A
Computer: SPWFE01
Description:
Console Configuration File Error: XML Exception: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
SP Log files:
All logs are for process: w3wp.exe (0x031C)                       0x17F4 Windows SharePoint Services
·     Begin OnLoad of XmlConsoleDataSource from file "EditingMenu".
·     Attempting to load XML from config file "EditingMenu".
·     PermissionMask check failed. asking for 0x00010000, have 0x00000000
·     Unknown SPRequest error occurred. More information: 0x80070005
·     Access Denied for /Projects/LFB/03 Bid Stage 1/Forms/AllItems.aspx.
·     StackTrace: Microsoft.SharePoint.Utilities.SPUtility:Void HandleAccessDenied(System.Exception), Microsoft.SharePoint.SPGlobal:Void HandleUnauthorizedAccessException(System.UnauthorizedAccessException), Microsoft.SharePoint.Library.SPRequest:Void OpenWeb(System.String, System.String ByRef, System.String ByRef, System.String ByRef, System.Guid ByRef, System.String ByRef, UInt32 ByRef, System.Guid ByRef, UInt32 ByRef, UInt32 ByRef, UInt32 ByRef, UInt16 ByRef, Boolean ByRef, Int16 ByRef, UInt32 ByRef, Int16 ByRef, Int16 ByRef, Int16 ByRef, Boolean ByRef, Int16 ByRef, UInt32 ByRef, Int16 ByRef, Int16 ByRef, Int16 ByRef, Int16 ByRef, Int32 ByRef, Boolean ByRef, System.String ByRef, System.String ByRef, Int32 ByRef, Int16 ByRef, ...
...System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.String ByRef, System.Object ByRef, Boolean ByRef, UInt64 ByRef, Boolean ByRef, Boolean ByRef, System.Guid ByRef, System.Guid ByRef, Int32 ByRef, System.DateTime ByRef, System.DateTime ByRef, System.String ByRef), Microsoft.SharePoint.SPWeb:Void InitWeb(), Microsoft.SharePoint.SPWeb:Microsoft.SharePoint.SPSecurableObjectImpl get_SecurableObjectImpl(), Microsoft.SharePoint.SPWeb:Microsoft.SharePoint.SPRoleAssignmentCollection get_RoleAssignments(), Microsoft.SharePoint.Publishing.WebControls.ConsoleXmlUtilities:System.String ConfigurationXml(System.String, Boolean), Microsoft.SharePoint.Publishing.W...
...ebControls.ConsoleXmlUtilities:Microsoft.SharePoint.Publishing.WebControls.ConsoleNode GetConsoleNodeCollectionFromXmlFile(System.String, Boolean), Microsoft.SharePoint.Publishing.WebControls.XmlConsoleDataSource:Void LoadTreeFromConfigXml(), Microsoft.SharePoint.Publishing.WebControls.XmlConsoleDataSource:Void OnLoad(System.EventArgs), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Control:Void LoadRecursive(), System.Web.UI.Page:Vo...
...id ProcessRequestMain(Boolean, Boolean), System.Web.UI.Page:Void ProcessRequest(Boolean, Boolean), System.Web.UI.Page:Void ProcessRequest(), System.Web.UI.Page:Void ProcessRequestWithNoAssert(System.Web.HttpContext), System.Web.UI.Page:Void ProcessRequest(System.Web.HttpContext), System.Web.HttpApplication+CallHandlerExecutionStep:Void System.Web.HttpApplication.IExecutionStep.Execute(), System.Web.HttpApplication:System.Exception ExecuteStep(IExecutionStep, Boolean ByRef), System.Web.HttpApplication+ApplicationStepManager:Void ResumeSteps(System.Exception), System.Web.HttpApplication:System.IAsyncResult System.Web.IHttpAsyncHandler.BeginProcessRequest(System.Web.HttpContext, System.AsyncCallback, System.Object), System.Web.HttpRuntime:Void ProcessRequestInternal(System.Web.HttpWorkerReque...
...st), System.Web.HttpRuntime:Void ProcessRequestNoDemand(System.Web.HttpWorkerRequest), System.Web.Hosting.ISAPIRuntime:Int32 ProcessRequest(IntPtr, Int32),
·     Releasing SPRequest with allocation Id {E3BC24ED-F243-4DBD-8625-EE7CF9FDA039}
·     Exception: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
·     Console Configuration File Error: XML Exception: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
·     Releasing SPRequest with allocation Id {D1A87724-6FB6-4009-B6D1-D7E15918E213}
Pryank Rohilla
MCTS, MCAD

Hi pryank,
From the log, it seems that the users don’t have permission on this page:
/Projects/LFB/03 Bid Stage 1/Forms/AllItems.aspx
Does the sub site have unique permission instead of inheriting permission from the parent site? If no, you need to make the sub site to inherit permission from the site collection so that master page also inherits the right. If this is not allowed in your organization, please go to “Site Actions”à “Site Settings” à “Master Pages and Page Layouts” to give users permissions on this document library.
Hope this helps.
Lu Zou

Access Rights Error

Similar Messages

Maybe you are looking for