Access Sequence - Error while defining it

Hi all,
I am getting the below error while defining a access sequence.
' UNFAVOURABLE SEQUENCE OF FIELDS - POSSIBLE PERFORMANCE PROBLEMS'
Could anyone please help me this..
Thanks,
Arthy

Hi Hegal,
I followed the basic principle. I was trying to define a new access sequence for the pricing conditions...
But I got the error that i reported earlier. I saved it inspite of the error. The access sequence got created but I am not sure if it will give any errors in my pricing procedure while executing the sales order.
Do you think it is some config error?
Thanks,
Arthy

Similar Messages

Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CR...

Post Author: lkamesam
CA Forum: Integrated Solutions
Hi,
I am running Crystal Reports version 10 from IBM Rational 6.0.1 build 20050725_1800 XML data source. When I try to run the report under WAS 6.0.1 I get the following error:
Does any body have any clue how to resolve my problem? Thanks
Error 500: Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CRDB_XMLImpl This is often caused by having the class at a higher point in the classloader hierarchy Dumping the current context classloader hierarchy: ==> indicates defining classloader *** indicates classloader where the missing class could have been found ==>[0] com.ibm.ws.classloader.CompoundClassLoader@163dd786 Local ClassPath: C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\classes;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\bobj_platform_jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cecore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\celib.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ceplugins.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cereports.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cesession.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\clientlogic.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\Concurrent.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CorbaIDL.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLExternal.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLServer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCharting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalContentModels.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExporters.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExportingBase.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalFormulas.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalQueryEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportingCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ebus405.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\icu4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jrcerom.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jsf_common.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\keycodeDecoder.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\log4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\MetafileRenderer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rasapp.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rascore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rpoifs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\serialization.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\URIUtil.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting-jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xercesImpl.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xmlParserAPIs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent; Delegation Mode: PARENT_FIRST [1] com.ibm.ws.classloader.JarClassLoader@338761606 Local Classpath: Delegation mode: PARENT_FIRST [2] com.ibm.ws.classloader.ProtectionClassLoader@38e75786 [3] com.ibm.ws.bootstrap.ExtClassLoader@7e475784 [4] sun.misc.Launcher$AppClassLoader@7e5a5784 [5] sun.misc.Launcher$ExtClassLoader@7e565784 -Original exception- java.lang.NoClassDefFoundError: OCA/OCAdbdll/DbDLLOperations at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code)) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:576) at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code)) at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code)) at com.crystaldecisions.reports.queryengine.driver.i.<init>(Unknown Source) at com.crystaldecisions.reports.queryengine.driver.i.case(Unknown Source) at com.crystaldecisions.reports.queryengine.av.ak(Unknown Source) at com.crystaldecisions.reports.queryengine.av.else(Unknown Source) at com.crystaldecisions.reports.queryengine.av.byte(Unknown Source) at com.crystaldecisions.reports.queryengine.av.do(Unknown Source) at com.crystaldecisions.reports.queryengine.as.new(Unknown Source) at com.crystaldecisions.reports.queryengine.at.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.b(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.a(Unknown Source) at com.crystaldecisions.reports.common.ab.a(Unknown Source) at com.crystaldecisions.reports.common.ab.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.a.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown Source) at com.crystaldecisions.report.web.a.a.K(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.bx.a(Unknown Source) at com.crystaldecisions.report.web.event.b1.broadcast(Unknown Source) at com.crystaldecisions.report.web.event.as.a(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.if(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source) at com.crystaldecisions.report.web.ServerControl.a(Unknown Source) at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ServerControlTag.doEndTag(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown Source) at com.ibm._jsp._sample._jspx_meth_crviewer_viewer_0(_sample.java:135) at com.ibm._jsp._sample._jspService(_sample.java:77) at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:88) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1212) at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:629) at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:117) at com.ibm.ws.jsp.webcontainerext.JSPExtensionServletWrapper.handleRequest(JSPExtensionServletWrapper.java:171) at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:230) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2837) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021) at

For those who would have the same problem, here is how I could eventually fix it.
Since the Flex Test Drive is sometimes out of sync with flash builder 4, I recreated a project using other help pages on Adobe site :
Entry point :
http://help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08- 7ffd.html
As suggested, I used the New Project wizard to create a new project, with :
Application server type : J2EE
Check the radio button "Use remote object access service : BlazeDS"
Then, as indicated in following pages (section "Accessing BlazeDS")... :
file:///C:/Mes%20documents%20C/Commun/Developpement/Documentation/HT-Tracks/AccessingData/ help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08-7ffe.ht ml#WSbde04e3d3e6474c4-19a3f0e0122be55e1b7-8000
...I selected the "Data / Connect to Data/Services..." menu option, which started the Data/service connection wizard.
There, I selected a BlazeDS (and not Web Services) service type, and everything went fine.
Suggestion to adobe staff : maybe it would be useful to update the Flex Test Drive to reflect Flash Builder 4 ?
Very nice product anyway, so far, congratulations...
Rgds
Marc.

ACCESS SEQUENCE - ERROR

Hi All,
When I'm trying to create an access sequence and while saving the following error is occuring. kindly let me know why this error is coming.Because of this I'm unable to save it.
"Request/task NEWK900003 can only be changed in client 000"
Regards
Manish

Dear G. Lakshmipathi,
Thank you for your reply.. Generally when I post any queries that are not related to the general sales cycle I hardly get response...I somehow managed to save the "ACCESS SEQUENCE "...
In the response that you have I'm confused on few things kinldy clarify these as I'm very new..
Q1. What eaxclty do you mean when u say ' "Request/task NEWK900003" would have moved from 000' ?
Q2. What is "Request/task NEWK900003" whenever we save a table come with a automatic request number like the above where will this number come from?
Q3. What and how the data will be flowing..are there any other modules involved while saving such requests.
Q4. (alternate method) How and where should I go to 000 client... Where should I make the requested changes..
Q5. How to transport the changes to 999
HOW DID I MANAGED TO SAVE????
While Saving I Have Clicked On "Create Request" And I Have Given Some Description And Data Was Saved..
Q1. What will be the implication for this..
Q2. What is this "Create request" what I'm I requesting and whom I'm I requesting.
Kindly respond
Reagrds
Manish

Error while defining a warehouse as Bonded Store

Hi All
I am getting one error while defining a OPM Warehouse as Bonded Store in OPM Inventory Module under Warehouse Attributes.
The error is 'APP-JA-460778: This Warehouse does not have a Parent Organization defined in Oracle Financials'. Can any one tell me where i missed the setup part of defining a parent organization in Financial Module. We are on OPM 11i EBS.
Thanks in advance
Prem.

I think you are using India Localization. Sorry, I don't have any knowledge in that area.
I got following information about how to setup Organization/Warehouse. And it says that any deviation from this may result in error. Check if you are following all the steps required for defining warehouse and organization.
Please ensure that the following setups are done exactly as mentioned below:
1) Create an OPM organization in OPM System Administration using OPM Organization Screen eg. ‘PM1’
2) Create a Location using ‘HR Locations’ form with the same name as the OPM Organization (eg. PM1)
3) Create an Inventory Organization using the form ‘HR Organizations’ with the same Organization Code as the OPM organization Code created in step 1. (Additional Identification details of the Organization could be given after a colon (:) in the Organization Name – Eg. ‘PM1: Vision Process India Mumbai’). Make this Inventory Organization as ‘Process Enabled’ and in the ‘Process Organization’ field, refer to the OPM Organization. Attach the HR Location created in step 2 to this Inventory Organization.
4) On saving the Inventory Organization record, the system shall automatically create a Warehouse with the same name in OPM under the OPM organization. (eg.PM1)
5) Query the Location ‘PM1’ and attach the Inventory Organization ‘PM1’ to it.
6) Go to Organization Additional info in OPM System Admin – Create a record for ‘PM1’.
Enter the EC Code for this Organization, as this is the Excise Licensed Organization. After saving
the record here, an automatic entry is created in India Local Inventory – Organization Additional Information for the Inventory Organization.
7) Go to India Local Inventory Org Additional Info and query for this Organization (it will be visible without location). DO NOT mark this as Master Organization.
8) Add another record for the Organization with Location (eg. PM1)
9) Check the 'Master Org' flag for this combination of Organization and Location.
B: Warehouse :
1) Create an Inventory Organization in India Local Inventory corresponding to the Warehouse in OPM (eg. ‘WSH’). Make this as ‘Process Enabled’ and give the ‘Process Organization’ as the
OPM Organization created earlier (PM1), which is the Process Organization this Warehouse is going to report to.
2) Create location (WSH-With the same name as the Warehouse Code) in India Local Inventory and attach it to organization ‘WSH’ in India Local Inventory
3) System automatically creates Warehouse ‘WSH’ in OPM under the OPM organization (PM1)
4) Using the ‘Warehouse Attributes’ form, classify this Warehouse as Bonded/Trading/OSP
5) Go to India Local Inventory Organization Additional Information form and create a record ‘WSH’ giving the Master Organization as ‘PM1’ (actually this is referring to the combination of PM1 with Location
PM1 as Master Organization) . Add another record for the same Org ‘WSH’ with Location ‘WSH’
with Master Organization as ‘PM1’. Please ensure that the EC Code is exactly same as the Master Organization.
6) Optionally ensure that in the Register Priorities, highest priority (1) is set against PLA.
7) Optionally ensure that Allow Negative PLA Balance Flag is checked.
Also make sure that all objects (triggers, packages etc) that are related to localization are valid.

Access Denied Error while accessing "Site Settings Access requests and invitations"

Hi,
I am getting Access Denied Error while accessing "Site Settings > Access requests and invitations" in SharePoint 2013 online. Currently I am the owner of the site and have "FULL CONTROL" access. I am able to access using
site collection account. So, what permission I have to give my regular account to access this page?
Thanks, Pal

Hello,
Have you recently changed the Owners group of the site collection or removed the user from the original owners group?
The reason I am asking is when the Access requests and invitations list are created, the permissions are given only to the default owners group at the time that the Access Request list was created. If this "regular account" is not part of that owners
group, the user will receive access denied. Site Collection Admins always have permissions for the Access Request List.
A workaround for the Access Denied issue is listed in the KB article http://support.microsoft.com/kb/2911390/en-us. By giving the correct group or user the permissions to this list, the users will not receive
the Access Denied issue anymore.
Preferably, in order to grant the user the full permissions ( you will see features like resending invitations may still fail after implementing the above workaround) there is one other workaround that may be required depending on what the original issue
was. Below are additional steps to restore full functionality.
1)Access the /_layouts/15/permsetup.aspx of the site collection, make sure the default Owners Group
is set correctly. (There is a group selected)
2) Add user to that Owners Group. (Issue may be resolved at this step if the site collection Owners
Group was never changed, if not continue to next step.)
3) Implement workaround on http://support.microsoft.com/kb/2911390/en-us, by adding that owners
group as Full control on Access Request list Permissions.
Let me know how this works out for you.
- Shpendi Jashari

Timerjob Access denied error while opening web object

Hi Team,
I have created a timer job to get list information on the site. Everything is fine in the development(Stand alone server) . Got access denied error while running same timer job in QA server(one app and one WFE).
Note: This timer job is globally deployed.
Code snippet :
SPSite site1 = webApp.Sites[0];
SPWeb web = site1.RootWeb;
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(site1.ID))
using (SPWeb currWeb = site.OpenWeb(web.ID)) // Got access denied error here.
Additional information:
Sharepoint timer service account : Domain\SP_Farm
Site app pool account : Domain\SP_App.
Both accounts have site collection administrative access on the site. Do i need to check access permissions on DB level also this error ?
Waiting for urgent reply..

Hi,
1. Please check the link below:
Fixing Access Denied Errors With SharePoint 2010 Timer Jobs
http://www.sharepointsecurity.com/sharepoint/sharepoint-security/fixing-access-denied-errors-with-sharepoint-2010-timer-jobs/
2. Try to set RemoteAdministratorAccessDenied to false using PowerShell
Access denied when deploying a timer Job or activating a feature from SharePoint 2010 content web application
https://support.microsoft.com/kb/2564009?wa=wsignin1.0
3. Check your ULS log for detail error message.
Best Regards
Dennis Guo
TechNet Community Support

Error while Running ESS - TypeBroker failed to access SLD: Error while obta

Hi all,
We try to run a WebDypro Application of ESS on 6.40 with mySAP ERP 2004:
All the necessary JCO connections
- SAP_R3_HumanResources
- SAP_RE_HumanResources_MetaData
are maintained and pinged and tested positive.
Still, we get following error message. (see complete stack below):
...TypeBroker failed to access SLD: Error while obtaining JCO connection.
Could anybody help, please?
ERROR STACK
An error has occurred:
"Failed to process the request."
Please contact your system administrator.
Hide details
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Vendor: SAP, Build ID: 6.4011.00.0000.20050217164947.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:49:12[UTC], changelist=329752, host=PWDFM026)
Web Dynpro code generators of DC sap.com/essarbank:
SapDictionaryGenerationCore: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:41[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4009.00.0000.20040910102423.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:28:58[UTC], changelist=280539, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:03[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4009.00.0000.20040929105448.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:46:16[UTC], changelist=286523, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4009.00.0000.20040929105448.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:46:16[UTC], changelist=286523, host=PWDFM026)
SapGenerationFrameworkCore: 6.4009.00.0000.20040910102127.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:17:08[UTC], changelist=280527, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:33:25[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4009.00.0000.20040609163924.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:21:50[UTC], changelist=253570, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:14[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:33:44[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:46[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
Web Dynpro code generators of DC sap.com/pcui_gp~xssutils:
SapDictionaryGenerationCore: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:41[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4009.00.0000.20040910102423.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:28:58[UTC], changelist=280539, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:03[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4009.00.0000.20040929105448.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:46:16[UTC], changelist=286523, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4009.00.0000.20040929105448.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:46:16[UTC], changelist=286523, host=PWDFM026)
SapGenerationFrameworkCore: 6.4009.00.0000.20040910102127.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:17:08[UTC], changelist=280527, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:33:25[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4009.00.0000.20040609163924.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:21:50[UTC], changelist=253570, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:14[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:33:44[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:46[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
Web Dynpro code generators of DC sap.com/ess~per:
SapDictionaryGenerationCore: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:41[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4009.00.0000.20040910102423.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:28:58[UTC], changelist=280539, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:03[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4009.00.0000.20040929105448.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:46:16[UTC], changelist=286523, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4009.00.0000.20040929105448.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:46:16[UTC], changelist=286523, host=PWDFM026)
SapGenerationFrameworkCore: 6.4009.00.0000.20040910102127.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:17:08[UTC], changelist=280527, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:33:25[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4009.00.0000.20040609163924.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:21:50[UTC], changelist=253570, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:14[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:33:44[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:46[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/pcui_gp~xssfpm:
SapDictionaryGenerationCore: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:41[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4009.00.0000.20040910102423.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:28:58[UTC], changelist=280539, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:03[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4009.00.0000.20040929105448.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:46:16[UTC], changelist=286523, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4009.00.0000.20040929105448.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:46:16[UTC], changelist=286523, host=PWDFM026)
SapGenerationFrameworkCore: 6.4009.00.0000.20040910102127.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:17:08[UTC], changelist=280527, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:33:25[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4009.00.0000.20040609163924.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:21:50[UTC], changelist=253570, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:14[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:33:44[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:46[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
Web Dynpro code generators of DC sap.com/ess~xx:
SapDictionaryGenerationCore: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:41[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4009.00.0000.20040910102423.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:28:58[UTC], changelist=280539, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:03[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4009.00.0000.20040929105448.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:46:16[UTC], changelist=286523, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4009.00.0000.20040929105448.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:46:16[UTC], changelist=286523, host=PWDFM026)
SapGenerationFrameworkCore: 6.4009.00.0000.20040910102127.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:17:08[UTC], changelist=280527, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:33:25[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4009.00.0000.20040609163924.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:21:50[UTC], changelist=253570, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:14[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:33:44[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:46[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
J2EE Engine:
No information available
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_08-b03, vendor: Sun Microsystems Inc.
Operating system:
Windows 2000, version: 5.0, architecture: x86
Error stacktrace:
com.sap.tc.webdynpro.services.exceptions.WDTypeNotFoundException: type com.sap.pcuigp.xssfpm.wd.model.types.Ext_Service could not be loaded: com.sap.dictionary.runtime.DdException: TypeBroker failed to access SLD: Error while obtaining JCO connection.
     at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:242)
     at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getDataType(DataTypeBroker.java:205)
     at com.sap.tc.webdynpro.progmodel.context.AttributeInfo.init(AttributeInfo.java:485)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initAttributes(NodeInfo.java:771)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:756)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:761)
     at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:433)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getController(Component.java:362)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.getPublicInterface(DelegatingComponent.java:142)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetBackendConnectionsController(InternalFPMComponent.java:199)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:171)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:105)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:95)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:346)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:349)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:599)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:391)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:265)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Caused by: com.sap.dictionary.runtime.DdException: TypeBroker failed to access SLD: Error while obtaining JCO connection.
     at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker$1.fillSldConnection(DataTypeBroker.java:89)
     at com.sap.dictionary.runtime.ProviderFactory.internalResolveLogicalNameToJCODestination(ProviderFactory.java:408)
     at com.sap.dictionary.runtime.ProviderFactory.resolveLogicalNameToJCODestination(ProviderFactory.java:354)
     at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider(ProviderFactory.java:215)
     at com.sap.dictionary.runtime.ProviderFactory.getProvider(ProviderFactory.java:180)
     at com.sap.dictionary.runtime.DdDictionaryPool.getProvider(DdDictionaryPool.java:87)
     at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:73)
     at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:48)
     at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:149)
     at com.sap.dictionary.runtime.DdBroker.getSimpleType(DdBroker.java:170)
     at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:234)
     ... 40 more

Hi
The type broker error indicates, issue with regard to your SLD. Check whether the SLD is configured properly. You need to do a initial level of SLD between your message server (SAp/back end) and your server. Check whether landscape has been created for the SAP server.
landscape must be proper with your server configuration/installation number, SID and instance number...etc...
After you have your SLD, recheck on your JCO for the model data and meta data connections..
If you have any specific issues do let us know
thanks
sathya

Getting access denied error while importing file using input type="file"

Hi All,
I am using struts application wherein I need to import file for some purpose.I have used input type="file" for the same which goes like:
<input type="file" id="uploadFile" name="uploadFile" size="50">
I have the import button on which I have used onClick event to call javascript function submitValues() used to validate all the fields from the page which goes like:
<input type="button" name="select" value="Import" class="CSSButton" onClick="javascript:submitValues();">
The JS function then in turn submits the form and calls the action.The problem is sometimes even when the correct path is specified for the file to be imported results in access denied error.This error comes sometimes and other times it works fine.But when this error comes,I need to relogin into the application and then it works fine.I am using IE7 for this.
Any idea why I am getting access denied error while importing? Has it got something to do with IE7 version or with the input type="file" which is being used here?
Thanks for any help if anyone can provide.
Edited by: passionateforjava on Mar 4, 2009 2:18 AM

vishnuS1984 wrote:
Hi Friends,
I have gone through scores of examples and i am failing to understand the right thing to be done to copy a file from one directory to another. Here is my class...So let's see... C:\GetMe1 is a directory on your machine, right? And this is what you are doing with that directory:
public static void copyFiles(File src, File dest) throws IOException
// dest is a 'File' object but represents the C:\GetMe1 directory, right?
fout = new FileOutputStream (dest);If it's a directory, where in your code are you appending the source file name to the path, before trying to open an output stream on it? You're not.
BTW, this is awful:
catch (IOException e)
IOException wrapper = new IOException("copyFiles: Unable to copy file: " +
src.getAbsolutePath() + "to" + dest.getAbsolutePath()+".");
wrapper.initCause(e);
wrapper.setStackTrace(e.getStackTrace());
throw wrapper;
}1) You're hiding the original IOException and replacing it with your own? For what good purpose?
2) Even if you had a good reason to do that, this would be simpler and better:
throw new IOException("your custom message goes here", e);
rather than explicitly invokign initCause and setStackTrace. Yuck!

Services procurement - Pricing Access sequence error for Custom fields

Hi Experts,
We have created 3 custom fields in KOMP structure. Which is required to create condition tables, access sequence. We have successfully created condition tables with the 3 fields along with the standard fields.
While creating access sequence we are getting the error as 'Select a document field'. Even after providing the document field, getting some other errors. Please find the attached document for steps we followed.
We are awaiting for your reply to rectify the error. Thanks.
Regards,
Ganesh R K.

Hi Vijay,
Thanks you very much for your valuable reply.
We have added the custom field in KOMK, KOMG & KOMP structures. I have added the ZZITEMGROUP before KFRST and its working fine.
Need to understand what is the implication of KFRST.
As per our requirement the ZZPRODUCT should come first, followed by ZZITEMGROUP. Please advice how to achieve this.
Thanks.
Regards,
Ganesh R K.

Access denied error while writing a file to the file system - myfileupload.saveas() throws system.unauthorizedexception

hi,
as part of my requirement , i have to perform read and write operations of few files [ using the file upload control in my custom visual web part] and on submit button click.
but while writing these files - with the help of fileupload control - and when i use myfileupload.saveas(mylocation);
- i am saving these files into my D:\ drive of my server , where i am executing my code -, am getting access denied error.
it throws system.unauthorizedexception.
i have given full control on that folder where i was trying to store my attached files. and also after following asp.net forums,
i have added iusr group added and performed all those steps such that, the file is saved in my D:\ drive.
but unfortunately that didnt happen.
also
a) i am trying the code with runwithelevatedprivileges(delegate() ) code
b) shared the drive within the d :drive where i want o save the files.
c) given the full privieleges for the app pool identity- in my case , its
network service.
the other strange thing is that, the same code works perfectly in other machine, where the same sp, vs 2012 etc were installed .
would like to know, any other changes/ steps i need to make it on this server, where i am getting the error.
help is appreciated!

vishnuS1984 wrote:
Hi Friends,
I have gone through scores of examples and i am failing to understand the right thing to be done to copy a file from one directory to another. Here is my class...So let's see... C:\GetMe1 is a directory on your machine, right? And this is what you are doing with that directory:
public static void copyFiles(File src, File dest) throws IOException
// dest is a 'File' object but represents the C:\GetMe1 directory, right?
fout = new FileOutputStream (dest);If it's a directory, where in your code are you appending the source file name to the path, before trying to open an output stream on it? You're not.
BTW, this is awful:
catch (IOException e)
IOException wrapper = new IOException("copyFiles: Unable to copy file: " +
src.getAbsolutePath() + "to" + dest.getAbsolutePath()+".");
wrapper.initCause(e);
wrapper.setStackTrace(e.getStackTrace());
throw wrapper;
}1) You're hiding the original IOException and replacing it with your own? For what good purpose?
2) Even if you had a good reason to do that, this would be simpler and better:
throw new IOException("your custom message goes here", e);
rather than explicitly invokign initCause and setStackTrace. Yuck!

Access denied error while trying to install graphics drivers

Hello,
I have a new toshiba laptop P70-A. I have installed windows 7 and the pc was working excellent up until now. Noticed yesterday that the nvidia automated system failed to install the new update. When I tried to install the new driver manually, even from the
device manager, I got the access denied message.
A day now wasted reading all the possible causes and solutions but with no luck. Read all the forums and all the posts, tried almost everything. Below youll find everything I tried as a solution and failed.
1.Disabled UAC
2.Enabled the administrator account and trying to take control from there
3.Run the subinacl and the reset.cmd
4.Tried manually to take control the folder windows (and access denied while changing the rights)
5. Scanned the system with everything there is available ( Kaspersky, MalwareBytes, RegCurePro, Tuneup Utilities, CCleaner) The system came out clean.
6. Tried restoring the system to an earlier time (got again access denied error code 0x80070005)
7. Checked all the group policies (all seem to be fine)
8. Run a script to take immediate ownership over all of C:
TAKEOWN /A /F C:
then the next one
TAKEOWN /F C:
9. With subinacl I run all the above scripts... (still nothing changed)
@echo off
title Resetting ACLs...
echo.
echo Determine whether we are on an 32 or 64 bit machine
echo.
if "%PROCESSOR_ARCHITECTURE%"=="x86" if "%PROCESSOR_ARCHITEW6432%"=="" goto x86
set ProgramFilesPath=%ProgramFiles(x86)%
goto startResetting
:x86
set ProgramFilesPath=%ProgramFiles%
:startResetting
echo.
cd /d "%ProgramFilesPath%\Windows Resource Kits\Tools"
echo.
echo Resetting ACLs...
echo (this may take several minutes to complete)
echo.
echo IMPORTANT NOTE: For this script to run correctly, you must change
echo the values named Athena to be the Windows user account that
echo you are logged in with.
echo.
echo ==========================================================================
echo.
echo.
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f /grant=restricted=r /grant=Athena=f /setowner=administrators > %temp%\subinacl_output.txt
echo.
echo.
subinacl /keyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f /grant=restricted=r /grant=Athena=f /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f /grant=users=r /grant=everyone=r /grant=restricted=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /keyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f /grant=users=r /grant=everyone=r /grant=restricted=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f /grant=users=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /keyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f /grant=users=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
echo System Drive...
subinacl /subdirectories %ProgramFilesPath%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt
echo.
echo.
echo Windows Directory...
subinacl /subdirectories %windir%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt
echo.
echo.
echo ==========================================================================
echo.
echo FINISHED.
echo.
echo Press any key to exit . . .
pause >NUL
Im frustrated really... ANY help at all would be really appreciated.
Thanks in Advance and sorry for the long post
Athena

Hello,
Thanks for the replies, i much appreciate it. I tried all of the above with no luck again. Safe mode allows me though to install drivers but thats reverting the moment im entering windows. Im always running commands and programs as a administrator or in
the Admin enabled account.
It seems the problem is solved today. Via tune up utilities I disabled most of the startup programs and services and it seems that 1 service is causing this issue. Although I havent played much with the disabled services but 3 remain to be checked. One of
the three is causing this.
Thanks again guys and Ill keep you posted about the soft. conflict.
Athena

Connection error while defining a IT resource for SQLServer

Hello,
I am new to the OIM. I am trying to provision users to a SQLServer database. I installed the DBConnector successfully, but while defining a ITResource (of type 'DBUM ITResource definition') for SQLServer from Web UI, I am getting this error.
Test connectivity is not supported for the IT resource type DBUM ITResource definition
Click Back to correct the connection parameters and re-test connection or click Continue to create the IT Resource anyway
Here are the parameters I am providing. I am sure I am entering the correct uid and pwd for the database.
Abandoned connection timeout :900
Admin ID : testUser
Admin Password : testPassword
Configuration : Lookup.DBUM.MSSQL.Configuration
Connection pooling supported : False
Connection Properties :
Connection Retries : 2
Connection Timeout : 1000
Connection wait timeout : 60
Database Driver : com.microsoft.sqlserver.jdbc.SQLServerDriver
Database Name : testDatabase
Inactive connection timeout : 300
Initial pool size : 3
isSecure : No
JDBC URL : jdbc:sqlserver://SQLServerHost;database=testDatabase
Max pool size : 30
Min pool size : 2
Native connection pool class definition :
Pool excluded fields : Configuration Lookup
Pool preference : Default
ResourceConnection class definition : oracle.iam.connectors.dbum.common.db.util.DBUMResourceConnectionImpl
Retry Interval : 1000
Target supports only one connection : False
Timeout check interval : 30
Validate connection on borrow : true
Thanks!
Kabi

Hi,
I setup the trace of com.waveset.adapter.ScriptedConnection.
the log message is following, what's reason of prblem? please help.
20070723 16:16:47.937 httpWorkerThread-8080-4(0x01341244) ScriptedConnectionPool#getConnection() Entry no args
20070723 16:16:47.937 httpWorkerThread-8080-4(0x01341244) ScriptedConnectionPool#getConnection() Exit void
20070723 16:16:47.938 httpWorkerThread-8080-4(0x01341244) TelnetConnection#connect() Entry no args
20070723 16:16:47.938 httpWorkerThread-8080-4(0x01341244) TelnetConnection#connect() Exit void
20070723 16:16:47.938 httpWorkerThread-8080-4(0x01341244) ScriptedConnection#runScript(Script) Entry no args
20070723 16:16:47.938 httpWorkerThread-8080-4(0x01341244) ScriptedConnection#processWaitFor() Entry no args
20070723 16:16:47.939 httpWorkerThread-8080-4(0x01341244) ScriptedConnection#refreshUnprocessedInput(int, int, String, boolean) Entry no args
20070723 16:17:57.990 httpWorkerThread-8080-4(0x01341244) ScriptedConnection#processWaitFor() Info Script failed waiting for "LOGIN:" with the following unprocessed text: ""

Access denied Error while calling Web Service form Infopath Form 2010.

Hi Dear All,
I have been facing an error while calling an GetUserProfileByName() web service method from InfoPath 2010 from.
i have FBA(Forms Base Authentication )configured . After Infopath form published to site collection when i select an user from people picker control i want to get Email Id of Selected user for that i am calling getUserProfileByName() Web Method, but
i am getting Access denied error code 500.
Any Help would be more than welcome.
Thanks.

Hi,
Greetings. Please check
Check the IE settings. Click Internet Options> Security>Custom level. Make sure that the ‘Access data source across domains’ is enabled. Make sure that you have permission to the web service and to the content which the web service tries to modify.
For more information, please refer to this site:
"Access is denied." error in Infopath 2007 form + ASMX: http://us.generation-nt.com/answer/access-denied-error-infopath-2007-form-plus-asmx-help-65808252.html
Please remember to click 'Mark as Answer' on the answer if it helps you

Error while defining the Payroll

Hi All,
I am getting an error while savng the details. It is showing an errror 'Please enter the required value for the employers PAYE Reference segment in the GB statutory info flexfield.
Aslo another error is i have created the Payment method but it is not showing me at Payment description screen..
Can any one help me out of this?
Thanks....

On the Define Payroll screen, there is an Additional Information box(DFF) for GB Statutory Info.
There are some mandatory fields you need to enter, before you can save the payroll.
If the Employers PAYE Reference field doesn't get you any data, you need to first define the Tax Reference details at the BG Level -
Re: Statutory Information
What exactly do you mean by Payment Description Screen ?
Cheers

Error while defining derivation rules in FMDERIVE

We are currently on ECC6. While defining Funds Mgmt .... activated the derivation rules in FMRULES. But when I try to define the derivation rules in FMDERIVE .. I get the following error: Syntax error in program "RFMDERIVE003 ".
Error in the ABAP Application Program
The current ABAP program "SAPMABADR" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RFMDERIVE003 " in include
"RFMDERIVE003 " in
line 32:
"The Dictionary structure or table "FMDERIVE003" is either not active o"
"r does not exist."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP* "
Error in the ABAP Application Program
The current ABAP program "SAPMABADR" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
How can the same be rectified. Kindly help.
Thanx
Shivaji

Hi,
Check the OSS note Note 644974 - Syntax error in program RFMXPR47. Looks like table FMDERIVE is missing.
Regards,
Sanjay

Access Sequence - Error while defining it

Similar Messages

Maybe you are looking for