Access SharePoint service over internet

Hi,
I have a SharePoint service hosted on a on-premise server. Server is internet facing.
The service (<a href="https:///_vti_bin/Service/TestService.svc)">https://<SharePointServer>/_vti_bin/Service/TestService.svc) is accessible over the internet. I can see the service details when I click on the service url.
I want to consume the service over internet (from CRM 2013 Online). I am not able to connect to the service. Please let me know how to create service proxy and invoke the methods. I am OK with hardcoding username and password while creating service proxy.
Also, is there any settings that I have to enable so that the service is accessible over internet?
Appreciate your help.
Thanks,
Rohit

Hi,
According to your description, you might want to consume the custom web service outside SharePoint.
You can take a look at the link below about how to consume web service for a quick start, the code demo provided in it would be helpful:
http://nikpatel.net/2012/02/29/step-by-step-building-custom-wcf-services-hosted-in-sharepoint-part-i/
Another two links about consuming web service in CRM for your reference:
http://deepakexploring.wordpress.com/2011/02/16/crud-operation-early-bound-classes-using-wcf-services-in-crm-2011/
http://nishantrana.me/2010/11/20/calling-wcf-service-in-plugin-in-crm/
If there are still any questions about how to consume web service for CRM 2013 Online, it is recommended to open a thread in CRM forum, you will get more help and confirmed answers
there:
http://social.microsoft.com/Forums/en-US/home?forum=crmdevelopment
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they
help and unmark them if they provide no help. If you have feedback for TechNet
Subscriber Support, contact [email protected]
Patrick Liang
TechNet Community Support

Similar Messages

  • Accessing discoverer viewer over internet

    URL's host name is changed when i am clicking to expand report link for work sheet selection. I have installed Oracle 10g AS and discoverer and trying to access work sheets over internet using discoverer viewer.

    Hello Michael,
    Thank you for your response. I did not changed fully qualified domain name. I am trying to access the discoverer viewer from outside of our LAN through internet. I have configured firewall to allow HTTP trafic to exposed server and mapped public IP and port to local discoverer server (port forwarding) to route discoverer viewer requests to discoverer server. Discover server is in our local domain with local IP address. I am able to view the viewer login and Worksheet list page with public IP in discoverer URL. When i am clicking to expand worksheet in worksheet list page, viewer changes the IP address part of URL to local host name. This local host name is not resolved outside and IE shows the 'Page Not Found' error. Pl suggest the way to resolve this issue.
    Thanks,
    Sambhaji Ghorpade

  • Accessing Agile PLM over Internet

    Hi,
    I am trying to access Agile PLM 93 URL over internet. I configured IIS and was successful in accessing the web URL on internet.
    But when I select an attachment row of an object and select More -> Get Shortcut option. Then I paste this link in browser, I am getting the below error
    Error Code: 403 Forbidden. The server denied the specified Uniform Resource Locator (URL). Contact the server administrator. (12202)
    The same attachment link is working fine in intranet. Are there any steps to be done for file manager?

    Try the Oracle Product Hub forum.
    Product Hub
    Hope this helps,
    Sandeep Gandhi

  • Wake for network access not reliable over internet...

    I've been going through major issues ever since I started tinkering with "Wake for network access" In a nutshell, when I was using my AirPort extreme with 7.4.2 and "Wake for network access" turned on someone or something kept on waking my Mac Mini via VNC. I know strange. So to combat this I back rev'd the AirPort to 7.4.1. This prevents the perpetrator from waking my Mac Mini, but now when I don't wake the Mini after a prolonged period of time it ceases to wake over the internet. If I wake the Mini manually and then let it sleep and then proceed to wake it over the net a few minutes later it wakes just fine ie using a WOL app on my iPhone. Also, it always wakes just fine on my LAN. I'm getting so tired of trying to troubleshoot my WOL issues. Any ideas?

    The remote app can either automatically find libraries available on a network (with home sharing available) or if you haven't got home sharing enabled, you can manually pair an itunes library with the remote app (using a number that is generated by the app and then typed into the itunes library).
    That is why I am so confused, as it seems to be the home sharing that is the problem!

  • Access Time Capsule over internet

    Is it possible to connect your time capsule to be a shared drive over the internet so u can access files etc. stored on it? I know its possible but im yet to come across instructions for time capsule's also being used as the router?

    jmiller510 wrote:
    Is it possible to connect your time capsule to be a shared drive over the internet so u can access files etc. stored on it?
    Yes. The easiest way to do this involves using a MobileMe account. You'd then use the MobileMe tab in the Advanced panel of AirPort Utility to enter the MobileMe sign-on information and sign the "remote" Mac into that MobileMe account using the "Back to My Mac" tab of the MobileMe panel of System Preferences.

  • Access time capsule over internet using a Domain name

    Hi
    I would like to know if there is a possibility to access my time capsule over the internet by my domain name on GoDaddy??
    I found too  many tutorials on the internet but unfortunately it is for TC 2nd generation, my TC is 3rd.
    Regards,

    I found too  many tutorials on the internet but unfortunately it is for TC 2nd generation, my TC is 3rd. 
    Regards,
    A tutorial for any generation is equally valid.
    It doesn't matter what URL you use as long as the computer translates it to the IP address of the WAN of your router.. which then forwards port 548 to the TC.. or if the TC is the main router, then you tick the WAN access and set the network password for the hard disk in the TC.

  • How To Access Time Capsule Over Internet?

    Can't seem to figure out how to access the Time Capsule drive over the internet. As far as I know it is all set up. But I have no clue how to access it when I am on the road. Do I do this through Mobile Me?

    Full details here:
    http://forums.dealmac.com/read.php?4,2800627 and http://discussions.apple.com/thread.jspa?threadID=1572371&tstart=31
    Regards
    Paul

  • Accessing External Drive Over Internet

    I have an Airport Extreme Base Station and have recently purchased a 1TB external hard drive which I have connected to it by USB. I can access the added disk fine when using my home nework.
    I also have a MobileMe account so I would also like to access the drive from anywhere with an internet connection. However, despite it being a documented feature of the base station, I can't actually find any clear instructions or a step by step guide to doing so. Does it mean turning on the 'Back To My Mac' feature? What else needs to be configured?
    Any help would be much apprreciated.

    Thanks for your reply.
    I followed your instructions but I although I can see the drive as shared in the Finder (http://idisk.me.com/brogan/Public/Pictures/Skitch/Applications-20100910-092842.p ng), I am unable to connect to it.
    When trying to connect, I get the following:
    http://idisk.me.com/brogan/Public/Pictures/Skitch/NetAuthAgent-20100910-093015.p ng
    I notice that the following is also displayed in my 'Back To My Mac' tab under MobileMe preferences.
    http://idisk.me.com/brogan/Public/Pictures/Skitch/MobileMe-20100910-093133.png
    I am trying to access from my Work Network (it was fine from home) and can currently access my iDisk with no problems. Any ideas?

  • Access Time Capsule over internet with Windows??

    Is this possible? I have a MobileMe account, and if required a dynamic dns hostname.
    My Time Capsule is behind a router. What firewall settings do I need to allow?
    Thanks

    I'd suggest going over to http://www.dyndns.org and pick up a dynamic DNS. that will allow you to access your Timecapsule even if your ip address changes.
    typically Windows wont work with afp:// addresses (which is appleshare) Windows natively uses SMB:// (samba/windows filesharing) you should be able to set up the smb sharing using timecapsule.
    Looking at the time capsule setup, it looks like smb:// is automatically supported so you should type
    smb://TCexternal_IPaddress
    instead of afp://

  • Planning book over internet

    can any one explain the concept or steps for making each planning book accessable to customer over internet.

    Check out
    http://help.sap.com/saphelp_scm41/helpdata/en/2e/2c8e39b7b3972ce10000000a114084/frameset.htm
    http://help.sap.com/saphelp_scm41/helpdata/en/2e/2c8e39b7b3972ce10000000a114084/frameset.htm
    You would want to do collaborative planning in situations where the partner needs to be given limited access to planning data or even inside an organization where not everyone has access to SAP system through SAP GUI. Internet becomes the GUI to manage data.

  • Conect plc over internet

    how i can access a PLC over internet using OPC?

    what PLC are you using? MatrikonOPC has a wide range of OPC Server for PLCs. Check it out here:
    http://www.matrikonopc.com/opc-drivers/plcs.aspx
    Wassim Daoud
    Global Solutions Architect 

  • Device is connected to to a wifi network but does not have access to Blackberry services over wifi connection

    please help me, my blackberry curve has been working perfectly fine (everything network and wifi connection are working great) since i got it but all of the sudden when i connect to our wifi at home i noticed that the wifi logo on the upper screen is grayed out. i checked the manual and it says: device is connected to to a wifi network but does not have access to Blackberry services over wifi connection. i dont  know what to do, i tried the hard reset (removed batt for 1 min while phone is on and put it back in) i also tried to remove the wifi profile and added it back up but still nothing seems to work, my service provider has BB services available on my phone, i can received BBM, pushed email, use FB on my phone using my network but i cant use my wifi to browse.. what should i do? help me please!

    With a PC, the Windows Firewall and/or the anti-virus software will sometimes block an attempted Internet connection.
    Check both applications to see if you can find a "blocked" item and then take steps to "allow" the connection.
    If still no luck, temporarily disable the wireless security for a short period to see if the PC can connect that way. If it can.....then you know it is security related issue.
    See if the PC can connect using a setting like WPA-PSK-TKIP. The equivalent Apple setting would be WPA/WPA2 Personal.

  • Visual Studio 2012: Can't access Sharepoint Web Services because of Discovery Credentials Prompt

     
    Hi.
    I've exactly the same problem that is descripted
    here, so I'll add its description here.
    My SharePoint is 2010
    I am trying to access the web services that are located in this url:
    http://<part_of_th_url_omitted>/_vti_bin/Lists.asmx. I have no problem accessing
    this URL using my broswer, that is, when I type the URL and my browser's address bar and press enter, I can see the list of the services that are available. I encounter no problem by accessing this site through my browser at all.
    However, when I try to access the services from that URL (http://<part_of_the_url_omitted>/_vti_bin/Lists.asmx),
    a Discovery Credential Dialog box prompts me for my username and password. SO what I do is I enter my username and password that I used to access the sharepoint using my browser, the problem is, the dialog box doesn't seem to accept the username and password
    that I enter as the dialog box is keep on appearing.
    Below are the detailed steps on how I go about in adding the Web Services.
    1. From the Solution Explorer, I right click on the "Service References" folder.
    2. From the context menu that appears, I Click on "Add Service Reference...". The "Add Service Reference" Dialog box will appear.
    3. From the "Add Service Reference" dialog box, I click on the "Advanced,,," button which can be seen at the bottom-left of the dialog
    box. The "Service Reference Settings" Dialog box will appear.
    4. From the "Service Reference Settings" dialog box, I click on the "Add Web Reference..." dialog box. The "Add Web Reference"
    Dialog box will appear. This is the dialog box where I can type the URL of the service that I want to access. So I type "http://<part_of_the_url_omitted>/_vti_bin/Lists.asmx".
    AFter typing that, I click on the Go button (which is the green arrow button at the right of the address bar of this dialog box).
    5. After doing that, a prompt dialog box will appear which has the title "Windows Security" and it is aking for my username and password. SO
    what I do is I enter the Username and the Password that I use in accessing the sharepoint site (http://<part_of_the_url_omitted>/_vti_bin/Lists.asmx)
    6. The prompt seems to accept the Username and Password, but after that, a new dialog box appeared with the title "Discovery Credential" and
    it says "The Service 'http://<part_of_the_url_omitted>/_vti_bin/Lists.asmx' requires a username and
    password". SO what I do is I enter again the un and pw that I use to access the sharepoint site, the one that I used inm the previous dialog box.
    7 After entering the username and the password and clicking the OK button. The dialog box reappears still asking for a username and a password, but this
    time, it shows a different message. It says "The Service 'http://<part_of_the_url_omitted>/_vti_bin/Lists.asmx/$metadata'
    requires a username and password". SO it really, what oonly changed is the URL, it has now the $metadata at the end. What do I do? I eneter the username and password again.
    8. After clicking Ok again, the dialog box reappears, now it says "The Service 'http://<part_of_the_url_omitted>/_layouts/1033/error.aspx'
    requires a username and password." Now it shows a very different username. Of ocurse, I still type in the username and password and click Ok.
    9. after doing that, the dialog box reappears again and it shows the same message as in step 6. So I do steps 6, 7 and 8 in a loop.
    10. When I finally get tired of entering the username and password, I click on cancel. The message box reappears again. So I click on cancel again. After
    doing that, I can then, surprisingly, see the list of the web services. However, not surprisingly, I still can't use it because the "Add Reference" button which I need to click in order to use the Web services is disabled. So I can only see the list
    of the services but I can't use it.

    Hi Gaston,
    I would suggest you the following thread, check whether it meet your scenario, it shows that if you have set IE options to remember the username and password, and you have enter wrong password before, this issue may happen:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/a7f466a5-0e4a-4f75-ad29-9591e2357e10/sharepoint-web-services-visual-studio
    Thanks,
    Qiao Wei
    TechNet Community Support

  • SharePoint Provider Hosted App (401) Unauthorized Microsoft.SharePoint.SPException: The Azure Access Control service is unavailable

    Hello,
    I'm attempting to get a SharePoint 2013 Provider Hosted Application working in a brand new SharePoint environment.  I've created snapshots of both my dev and the sharepoint environments along the way and have meticulously documented every step of the
    way.  I've followed these instructions (among many other resources found along this journey) :
    http://msdn.microsoft.com/en-us/library/fp179923(office.15).aspx
    http://technet.microsoft.com/en-us/library/fp161236(office.15).aspx
    http://msdn.microsoft.com/library/office/fp179901%28v=office.15%29
    Upon package and publish of my application to SharePoint, I get a 401 Unauthorized error.  I use Fiddler to obtain the SPErrorCorrelationID to ultimately obtain the following ULS Viewer Output.  Please explain how to fix if you're able.
    Please Note:  I was under the impression that a Provider Hosted Application does not use the Azure Access Control service, so I'm confused as to why my system is attempting to make this connection?
    Also Note:  I've used a self signed and godday obtained certificate to successfully f5 debug my basic web.title (out of the visual studio 2012 box) sharepoint provider hosted application... so I know my certs are good.
    Here's my ULS output:
    03/24/2014 08:54:47.83    w3wp.exe (0x1448)    0x22D8    SharePoint Foundation    Logging Correlation Data    xmnv    Medium    Name=Request (GET:http://portal.cltenet.com/_layouts/15/appredirect.aspx?instance_id=22d5252f%2D392c%2D4f68%2Db820%2Da3053b9d4f24)  
     306c809c-66a1-d0d5-d8e2-89d3631ce1bf
    03/24/2014 08:54:47.83    w3wp.exe (0x1448)    0x22D8    SharePoint Foundation    Authentication Authorization    agb9s    Medium    Non-OAuth request.
    IsAuthenticated=True, UserIdentityName=0#.w|cltenet\sp.apps, ClaimsCount=25    306c809c-66a1-d0d5-d8e2-89d3631ce1bf
    03/24/2014 08:54:47.83    w3wp.exe (0x1448)    0x22D8    SharePoint Foundation    Logging Correlation Data    xmnv    Medium    Site=/    306c809c-66a1-d0d5-d8e2-89d3631ce1bf
    03/24/2014 08:54:47.84    w3wp.exe (0x1448)    0x22D8    SharePoint Foundation    App Deployment    acjjg    Medium    The current user has System.Threading.Thread.CurrentPrincipal.Identity.Name
    = 0#.w|cltenet\sp.apps, System.Security.Principal.WindowsIdentity.GetCurrent().Name = NT AUTHORITY\IUSR, System.Web.HttpContext.Current.User.Identity.Name = 0#.w|cltenet\sp.apps.    306c809c-66a1-d0d5-d8e2-89d3631ce1bf
    03/24/2014 08:54:47.84    w3wp.exe (0x1448)    0x22D8    SharePoint Foundation    App Auth    ajsrv    Medium    redirectLaunUrl after getting it from query
    string, web or app instance: https://hightrust31.cltenetapps.com/Pages/Default.aspx?{StandardTokens}    306c809c-66a1-d0d5-d8e2-89d3631ce1bf
    03/24/2014 08:54:47.85    w3wp.exe (0x1448)    0x22D8    SharePoint Foundation    General    aib0n    High    trying to get app tokens for site: 888b71f7-51ee-40f5-8344-8de4869d37d0
    Unable to load app tokens from appInstanceId: 22d5252f-392c-4f68-b820-a3053b9d4f24    306c809c-66a1-d0d5-d8e2-89d3631ce1bf
    03/24/2014 08:54:47.85    w3wp.exe (0x1448)    0x22D8    SharePoint Foundation    App Auth    ajsrw    Medium    redirectLaunUrl after getting token replacement:
    https://hightrust31.cltenetapps.com/Pages/Default.aspx?SPHostUrl=http%3A%2F%2Fportal%2Ecltenet%2Ecom&SPLanguage=en%2DUS&SPClientTag=0&SPProductNumber=15%2E0%2E4420%2E1017    306c809c-66a1-d0d5-d8e2-89d3631ce1bf
    03/24/2014 08:54:47.85    w3wp.exe (0x1448)    0x22D8    SharePoint Foundation    App Auth    ajsry    Medium    m_oauthAppId after NormalizeAppIdentifier()
    i:0i.t|ms.sp.ext|[email protected]8df36d5d.  Now getting app principal info.    306c809c-66a1-d0d5-d8e2-89d3631ce1bf
    03/24/2014 08:54:47.85    w3wp.exe (0x1448)    0x22D8    SharePoint Foundation    App Auth    ajsr0    Medium    decided that we need to do a POST to the
    app.    306c809c-66a1-d0d5-d8e2-89d3631ce1bf
    03/24/2014 08:54:47.85    w3wp.exe (0x1448)    0x22D8    SharePoint Foundation    App Auth    ajsr1    Medium    m_redirectMessage: EndpointAuthorityMatches  
     306c809c-66a1-d0d5-d8e2-89d3631ce1bf
    03/24/2014 08:54:47.85    w3wp.exe (0x1448)    0x22D8    SharePoint Foundation    App Auth    ajsr2    Medium    realm matched attempting to get app token
    using GetAccessToken()    306c809c-66a1-d0d5-d8e2-89d3631ce1bf
    03/24/2014 08:54:47.85    w3wp.exe (0x1448)    0x22D8    SharePoint Foundation    App Auth    advzm    High    Error when get token for app i:0i.t|ms.sp.ext|[email protected]8df36d5d,
    exception: Microsoft.SharePoint.SPException: The Azure Access Control service is unavailable.     at Microsoft.SharePoint.ApplicationServices.SPApplicationContext.GetApplicationSecurityTokenServicesUri(SPServiceContext serviceContext)    
    at Microsoft.SharePoint.ApplicationServices.SPApplicationContext..ctor(SPServiceContext serviceContext, SPIdentityContext userIdentity, OAuth2EndpointIdentity applicationEndPoint)     at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForApplicationContext(SPIdentityContext
    userIdentityContext, String applicationId, Uri applicationRealm, SPApplicationContextAccessTokenType applicationTokenType, SPApplicationDelegationConsentType consentValue)     at Microsoft.SharePoint.SPServerToAppServerAccessTokenManager.GetAccessTokenPrivate(SPServiceContext
    serviceContext, String appId, Uri appEndpointUrl, SPAppPrincipalInfo appPrincipal, SPApplicationContextAccessTokenType tokenType, Boolean useThreadIdentity, SPUserToken userToken)    306c809c-66a1-d0d5-d8e2-89d3631ce1bf
    03/24/2014 08:54:47.85    w3wp.exe (0x1448)    0x22D8    SharePoint Foundation    App Auth    ajsr3    High    App token requested from appredirect.aspx
    for site: 888b71f7-51ee-40f5-8344-8de4869d37d0 but there was an error in generating it.  This may be a case when we do not need a token or when the app principal was not properly set up.  LaunchUrl:https://hightrust31.cltenetapps.com/Pages/Default.aspx?SPHostUrl=http://portal.cltenet.com&SPLanguage=en-US&SPClientTag=0&SPProductNumber=15.0.4420.1017
    Exception Message:The Azure Access Control service is unavailable.  Stacktrace:    at Microsoft.SharePoint.ApplicationServices.SPApplicationContext.GetApplicationSecurityTokenServicesUri(SPServiceContext serviceContext)    
    at Microsoft.SharePoint.ApplicationServices.SPApplicationContext..ctor(SPServiceContext serviceContext, SPIdentityContext userIdentity, OAuth2EndpointIdentity applicationEndPoint)     at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForApplicationContext(SPIdentityContext
    userIdentityContext, String applicationId, Uri applicationRealm, SPApplicationContextAccessTokenType applicationTokenType, SPApplicationDelegationConsentType consentValue)     at Microsoft.SharePoint.SPServerToAppServerAccessTokenManager.GetAccessTokenPrivate(SPServiceContext
    serviceContext, String appId, Uri appEndpointUrl, SPAppPrincipalInfo appPrincipal, SPApplicationContextAccessTokenType tokenType, Boolean useThreadIdentity, SPUserToken userToken)     at Microsoft.SharePoint.SPServerToAppServerAccessTokenManager.GetAccessTokenFromThreadIdentityOrUserToken(SPServiceContext
    serviceContext, String appId, Uri appEndpointUrl, SPApplicationContextAccessTokenType tokenType, SPAppPrincipalInfo appPrincipal, Boolean useThreadIdentity, SPUserToken userToken)     at Microsoft.SharePoint.ApplicationPages.AppRedirectPage.ValidateAndProcessRequest(). 
    Since this is a nonfatal error, it will be sanitized and posted to the app as part of the app launch.    306c809c-66a1-d0d5-d8e2-89d3631ce1bf
    03/24/2014 08:54:47.85    w3wp.exe (0x1448)    0x22D8    SharePoint Foundation    General    ajlz0    High    Getting Error Message for Exception Microsoft.SharePoint.SPException:
    The Azure Access Control service is unavailable.     at Microsoft.SharePoint.ApplicationServices.SPApplicationContext.GetApplicationSecurityTokenServicesUri(SPServiceContext serviceContext)     at Microsoft.SharePoint.ApplicationServices.SPApplicationContext..ctor(SPServiceContext
    serviceContext, SPIdentityContext userIdentity, OAuth2EndpointIdentity applicationEndPoint)     at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForApplicationContext(SPIdentityContext userIdentityContext, String applicationId, Uri
    applicationRealm, SPApplicationContextAccessTokenType applicationTokenType, SPApplicationDelegationConsentType consentValue)     at Microsoft.SharePoint.SPServerToAppServerAccessTokenManager.GetAccessTokenPrivate(SPServiceContext serviceContext,
    String appId, Uri appEndpointUrl, SPAppPrincipalInfo appPrincipal, SPApplicationContextAccessTokenType tokenType, Boolean useThreadIdentity, SPUserToken userToken)     at Microsoft.SharePoint.SPServerToAppServerAccessTokenManager.GetAccessTokenFromThreadIdentityOrUserToken(SPServiceContext
    serviceContext, String appId, Uri appEndpointUrl, SPApplicationContextAccessTokenType tokenType, SPAppPrincipalInfo appPrincipal, Boolean useThreadIdentity, SPUserToken userToken)     at Microsoft.SharePoint.ApplicationPages.AppRedirectPage.ValidateAndProcessRequest()  
     306c809c-66a1-d0d5-d8e2-89d3631ce1bf
    03/24/2014 08:54:47.85    w3wp.exe (0x1448)    0x22D8    SharePoint Foundation    App Auth    aib0p    Medium    Doing appredirect from appredirect.aspx:
    in site: 888b71f7-51ee-40f5-8344-8de4869d37d0 with RedirectLaunchUrl: https://hightrust31.cltenetapps.com/Pages/Default.aspx?SPHostUrl=http%3A%2F%2Fportal%2Ecltenet%2Ecom&SPLanguage=en%2DUS&SPClientTag=0&SPProductNumber=15%2E0%2E4420%2E1017  
     306c809c-66a1-d0d5-d8e2-89d3631ce1bf
    03/24/2014 08:54:47.85    w3wp.exe (0x1448)    0x22D8    SharePoint Foundation    Monitoring    b4ly    Medium    Leaving Monitored Scope (Request (GET:http://portal.cltenet.com/_layouts/15/appredirect.aspx?instance_id=22d5252f%2D392c%2D4f68%2Db820%2Da3053b9d4f24)).
    Execution Time=26.5933938531294    306c809c-66a1-d0d5-d8e2-89d3631ce1bf
    Your help is very much appreciated.
    With Respect,
    Larry

    Yes, actually - I was able to resolve it.
    However I don't know how, unfortunately.  I suspect it was because I needed to have the names of the certificates, defined during the certificate registration (to sharepoint) process, different.
    I have a complete document that shows step by step instructions on the exact process I took to complete the provider hosted application creation, deployment and publishing.  It was a daunting task, but I finished it successfully.
    If there's a way to send private message on this forum, please do so and I'll respond with a way to obtain my document.
    NOTE:  I'm not all impressed with the way this forum works.  This is supposed to be a Microsoft resource and I'll be damned if I ever get a response to highly technical questions.  Completely lame.  Boooooo Microsoft.

  • Access Time Capsule over the internet

    Hey guys! I have a problem. I cannot access my Time Capsule over the internet.
    I have a Time Capsule 2013 which connects to the internet using a PPPoE connection and which provides wireless connection to other peripherals in my house.
    The TC is running the latest firmware and I've added my iCloud account in AirPort Utility settings, in order to access the TC over the internet, via Back to My Mac.
    Whenever I'm away from home, I cannot access the TC.
    I see it in Finder's sidebar, but whenever I press the "Connect As.." button I get the following error:
    "There was a problem connecting to the server “Time Capsule”.
    The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
    I must add that I have a dynamic IP. Whenever the Time Capsule restarts, it gets a different IP.
    Am I missing something?
    Please help me. It's really important for me to be able to reach it when I'm away from home.

    So the modem is bridged and the TC is doing the PPPoE authentication.. and it gets a public IP on the WAN interface.
    The dynamic nature of the IP is not a problem with the BTMM and iCloud type system which should keep the intermediate connection in the cloud up to date.
    What about the connection at the other side.. are you getting a public IP.. are you behind a firewall or restricted access? Remember both sides of this have to work.
    See this thread.. you are not alone.. all is not sweetness and light unless you get a proper business account with static IP.
    https://discussions.apple.com/thread/3699096?start=0&tstart=0
    Apple info has a bit about issues that people experience.. and Tesserax has some setup info.
    Remote Access
    I would use the public IP and see if it works.. that means you need to check the IP before you leave home or use your phone tether and do the test at home so you can type in the public ip and use direct access .. at least to test it.

Maybe you are looking for