Access switch lost contact with nac profiler

hi all,
We have implement HA for nac profiler using version 3.1.1_18 .My problem is we need manually update for all access switch to connected with nac profiler server and then endpoint detect if i'm don't click button update for all access switch not see the new endpoint .On the acceess switch we configure SNMP cisconac RO and cisconac1 RW .For the SNMP is it needed manually update or automatic if new endpoint connect to the network ?here i'm attach on the my configuration SNMP ..

Hi Larry,
I had the same problem with iTune 10.6.5, and one cannot uninstall it. I was on the phone with Apple wireless support. The solution is to upgrae firmware on the Express, whihc cannot be doen with the latest airport utilities. HOwever, Apple re-posted Airport utility 5.6 for lion, which will then allow you to upgrade the firmware on older Aplle Express Units. This in turn will allow iTune 10.6 to communicate properly wit the Express. Doing so  restored my connection to the speakesr without any further issues.
Give it a try...
the utility i sloctaed at:
http://support.apple.com/kb/DL1482?viewlocale=en_US&locale=en_US
Best,
rk007

Similar Messages

  • I set my cRIO from 'DHCP' to 'link local' and lost contact with it.

    I set my cRIO from 'DHCP' to 'link local' and lost contact with it.
     I changed the setting at the placed labeled "2" to link local only, then I think I hit save at "3".  Then poof, I had no network contact with my cRIO.  
    I tried;
        Hitting the reset button
        Opening a closing MAX
        Going to safe mode
        Throwing the Reset IP switch 
        Power cycling the cRIO
        Running cat 5 cable directly from the Host to my target
    None of it worked, and I have no contact with my cRIO.
    This is what MAX looks like now.  How can I fix this?
    Solved!
    Go to Solution.

    Make sure to disable the firewall on your computer.
    Otherwise you can check through the steps in this documentation:
    http://digital.ni.com/public.nsf/allkb/ABE4BC247E8​AC9BC8625734E005CAB42
    Note specifically that one option is to read the console out from the target VIA the serial port will a null modem cable during boot and it will indicate what IP the system is using.
    Craig H. | CLA | Systems Engineer | National Instruments

  • Server 4: Cannot connect to remote server: "lost contact with the AuthService"

    Attempting to upgrade to Server 4; have Server 4 app on my local Mac to administer a remote Mac mini running Server 4. Server app 4 on the mini connects to itself; however, I cannot user Server app 4 on my local Mac to connect remotely to the mini. Have verified the machine name, user, and password are all correct (they haven't changed and worked fine under Server 3.2.2). Console on the local machine shows the following error:
    12/27/14 5:56:27.303 PM Server[4193]: Connected to the Auth Service
    12/27/14 5:56:27.303 PM Server[4193]: authenticateToServermgrdAs: connection returned an error Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.servermgrd.auth was invalidated.) UserInfo=0x60800047f780 {NSDebugDescription=The connection to service named com.apple.servermgrd.auth was invalidated.}
    12/27/14 5:56:27.304 PM Server[4193]: We have lost contact with the AuthService we will need to reauth
    Any ideas on how to troubleshoot? Thanks --

    Export the com.apple.servermgrd certificate from your server. Import it on your local computer and ensure that it is set to Always Trust. Ensure that you also follow the directions from the article linked below.
    How to administer OS X Server remotely using Server App - Apple Support

  • Bought a new iphone and i cant activate it unless the previous owner deletes the account from their icloud but i lost contact with the previous owner how can i fix this?

    bought a new iphone and i cant activate it unless the previous owner deletes the account from their icloud but i lost contact with the previous owner how can i fix this?

    Take it back where you got and and get your money back.
    As has been pointed out, if there was a "previous owner", the phone is not "new". Thephone you purchased is most likely stolen. If whoever you bought it from won't give you your money back, turn it over to the police.

  • My Photoshop Elements 11 has suddenly lost contact with my CanoScan 9000F with the following message..."CanoScan 9000.  software for this device could not be launched.  The drive is not connected or is busy."  How do I regain connection?

    My Photoshop Elements 11 has suddenly lost contact with my CanoScan 9000F with the following message..."CanoScan 9000.  software for this device could not be launched.  The drive is not connected or is busy."  How do I regain connection?

    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem

  • Muse Lost Contact with my Site

    First of all, I'd like to tell you how bad it sucks to have to go through this process to get support. My recommendation of Muse just went from a 10 to a 4; this is unacceptable.
    Out of NOWHERE, Muse lost contact with my site. I didn't do A SINGLE THING different, but now my site will no longer update. I've gone as far as to delete everything and starting over, uploading 80 pages and 787 files to try to make my site functional again, to NO AVAIL. Even though I've deleted the site, it is still active.
    I've started 'fresh' 3 times. I have never had a problem linking a site to a URL, or Muse to a URL for updating. I'm frustrated and flabergasted. Now I'm at the mercy of the ******* COMMUNITY to get help with something ADOBE's malfunction/ dysfunctional product caused?!?!  W T F .
    How do I resolve this issue?

    The best place to go for immediate support is Live Chat at <http://helpx.adobe.com/contact.html?product=muse&topic=using-my-product-or-service> and click on "I still need help…" and then "Chat now".
    The best place to tap into a large group with very deep and broad experience using, developing and supporting Muse is here on the forum. Those active of the forum include fellow Muse users and members of the Muse Technical Support and Product Development Teams.
    What specifically are you attempting that's failing? FTP Upload? Publish? Or something else? Can you provide a screenshot of what error(s) you're encountering so we can better understand how we can help? What's the URL for your site? Thanks.

  • Thumbnails lost contact with originals in iPhoto '09 (8.1.2.) – can't view fullscreen or edit!

    Over the past days my headache over the iPhoto '09 library has gone from bad to worse.
    Starting with a few albums and events from last year, iPhoto has stopped displaying some photos (mainly landscape-oriented photos, upright photos seem to be working fine most of them) in fullscreen, edit mode and slideshows.
    Browsing through the apple community I've realized that this issue may be due to thumbnails losing contact with original photos. Indeed, I can't seem to export photos to desktop or any other location. "Show original file" or "show file" only opens an empty Finder window, doesn't connect with the Picture folder or anything.
    I've also tried entering the Library manually from another working photo, and can't seem to locate a number of pics. It seems the originals are simply lost.
    Some of the missing pictures are irreplacable (like my son's birth!). 
    I'd be INCREDIBLY THANKFUL for any advice on how to save these photos.
    Cheers/ AB

    The simple and surefire solution is to restore from back up.
    If files are missing then that's the only solution.
    To rebuild the Library:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • ORA-03135: connection lost contact with setDataBuffer and next(no. of rows)

    Hi,
         I have a cursor of 16 columns with datatypes of VARCHAR or NUMBER , I have used setDataBuffer to set the buffers appropriately. Now, when I call next(1000) I am getting an exception "ORA-03135: connection lost contact". But, the connection is not closed from the application side. What could be the possible reason? Please help me out with the same.
    The code snippet is
    char  mPkidArr[1000][255];
    char  mDestMdn[1000][255];
    char  mSrcMdn[1000][255];
    int     mDlvyType[1000];
    int     mProcessId[1000];
    int     mPriority[1000];
    char  mDvyTime[1000][255];
    char  mExpTime[1000][255];
    char  mShortCode[1000][255];
    int     mDocAckReq[1000];
    char mSourceAdd[1000][255];
    int mDestSvcId[1000];
    int mOrigSvcId[1000];
    char mCldNum[1000][255];
    int IsDr[1000];
    int UmrMsgId[1000];
    Statement *stmtselectfield = conn->createStatement("SELECT TO_CHAR(SS.Pkid), SM.DestMDN, SS.SrcMDN, SS.DlvyType, SS.SfmProcessId, SS.Priority,
        TO_CHAR(SS.DefDlvyTime), TO_CHAR(SS.ValidityExpiryTime), SS.ShortCode, SS.DeliveryAckReq, SS.SourceAddr,
        SS.DestSvcId, SS.OrigSvcId, SS.CalledNumber, SS.IsDR, SS.UmrMsgId
        FROM SFMSMS_0 SS, SfmMdnData_0 SM
        WHERE SM.DestMdn = 722898018  AND SS.Fk_DestMDN_Id = 2560003
        ORDER BY SS.timeStamp ASC");  //this is the query formed as per the sample test program
       stmtselectfield->execute();
       ResultSet *resultSet =  stmtselectfield->getCursor(3);
    if(resultSet)
                                                  try
                                                        resultSet->setDataBuffer(1,mPkidArr,OCCI_SQLT_STR,BUFFERCOL,ArrSize,NULL,NULL);
                                                        resultSet->setDataBuffer(2,mDestMdn,OCCI_SQLT_STR,BUFFERCOL,ArrSize,NULL,NULL);
                                                        resultSet->setDataBuffer(3,mSrcMdn,OCCI_SQLT_STR,BUFFERCOL,ArrSize,NULL,NULL);
                                                        resultSet->setDataBuffer(4,&mDlvyType,OCCIINT,sizeof(mDlvyType[0]));
                                                        resultSet->setDataBuffer(5,&mProcessId,OCCIINT,sizeof(mProcessId[0]));
                                                        resultSet->setDataBuffer(6,&mPriority,OCCIINT,sizeof(mPriority[0]));
                                                        resultSet->setDataBuffer(7,mDvyTime,OCCI_SQLT_STR,BUFFERCOL,ArrSize,NULL,NULL);
                                                        resultSet->setDataBuffer(8,mExpTime,OCCI_SQLT_STR,BUFFERCOL,ArrSize,NULL,NULL);
                                                        resultSet->setDataBuffer(9,mShortCode,OCCI_SQLT_STR,BUFFERCOL,ArrSize,NULL,NULL);
                                                        resultSet->setDataBuffer(10,&mDocAckReq,OCCIINT,sizeof(mDocAckReq[0]));
                                                        resultSet->setDataBuffer(11,mSourceAdd,OCCI_SQLT_STR,BUFFERCOL,ArrSize,NULL,NULL);
                                                        resultSet->setDataBuffer(12,&mDestSvcId,OCCIINT,sizeof(mDestSvcId[0]));
                                                        resultSet->setDataBuffer(13,&mOrigSvcId,OCCIINT,sizeof(mOrigSvcId[0]));
                                                        resultSet->setDataBuffer(14,mCldNum,OCCI_SQLT_STR,BUFFERCOL,ArrSize,NULL,NULL);
                                                        resultSet->setDataBuffer(15,&IsDr,OCCIINT,sizeof(IsDr[0]));
                                                        resultSet->setDataBuffer(16,&UmrMsgId,OCCIINT,sizeof(UmrMsgId[0]));
                                                         while(oracle::occi::ResultSet::DATA_AVAILABLE == resultSet->next(1000) || oracle::occi::ResultSet::STREAM_DATA_AVAILABLE == resultSet->next(1000))
                                                                      for(int i = 0; i < resultSet->getNumArrayRows();i++)
                                                                             //Some app related fields assignment
                                              catch (const SQLException& e)
                                                            printf("exception %s\n",e.what());
                                                            throw DBException(e.what(), e.getErrorCode());
    stmtselectfield->closeResultSet(resultSet);
    conn->terminateStatement(stmtselectfield);
    Any suggestions are most welcome
    Thanks in advance
    Sankeerna

    953733 wrote:
    Two servers, both with Oracle 32bit client 10.2.0.3, both with identical sqlnetora, both connecting to same oracle DB using same credentials.
    issue identical SQL from sqlnet client on both machines - one succedes after 60mins with the resultset returned - one errors after around 45mins with ORA-03135: connection lost contact.
    I actually have a dozen of so other boxes that generate the same error and just one where in runs perfectly every time.
    All are in same data center on similar phisical hardware with same windows OS. Only difference I can see is a folder with instaclient 11 on the machines where it fails.
    Any idea's what this could be? Firewall inactivity timeout

  • Lost root password nac profiler

    hi all,
    any idea how to reset root password for network admission control (nac ) Profiler ?like some link or else ?
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    Really appreciate to you all resolve my problem .

    Hi,
    To recover the root password, you'll want to follow these steps:  http://www.cisco.com/en/US/products/ps6128/products_password_recovery09186a008073cab6.shtml#later.
    Even though it is not specific to the profiler software, the appliance is the same so the recovery process is the same.
    If you've lost the admin password, you can reset the password using this procedure:  http://www.cisco.com/en/US/docs/security/nac/profiler/configuration_guide/310/p_user_man31.html#wp1066696.
    HTH,
    Tiago
    If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

  • Windows 2012 DHCP Failover "Lost contact with partner"

    We have stood up a pair of Windows 2012 DHCP servers and configured DHCP failover (in Load Balancing mode) as per the Microsoft Technet article.  The two servers are on the same subnet, and time is in sync between them.  Almost immediately after
    configuring scopes to failover, one node loses contact with the other, and the alternate node goes to failover mode "Recover".
    We have restarted both servers and services.  Both DHCP servers show as available.  Clicking "Replicate Failover Scopes" completes successfully with no errors, and the only two warnings in the Event Log are about credentials for Dynamic
    DNS updates and a dynamic IPv6 address (which we don't use at all.)
    How come they can replicate, but have "lost contact"; and how do we get the one out of "Recover" mode?

    You should see Recover state only if one of the DHCP server actually went down and came back up. In this case the server which comes back up would be in Recover state but will transition to Recover_Wait state and come back to Normal after it syncs it
    leases. This should be relatively quickly. Did your servers continue to remain in the Lost Contact...\Recover state for long.
    Did you see any events in the DHCP Server admin channel
    Microsoft\Windows\DHCP Server\Admin.
    You can also enable AuditLogs (Microsoft\Windows\DHCP
    Server\AuditLogs) which logs all the server to server messages. You can enable the log by right clicking on
    Microsoft\Windows\DHCP Server. View->Show Analytical and Debug Logs. This will show the
    Microsoft\Windows\DHCP Server\AuditLogs in event viewer. You can then right click and enable the log and see if there are any failures
    being logged there.

  • Cannot restore because lost contact with ipod update server host

    Hi. Yesterday i tried to restore my ipod because my brother accidentally put it in restore mode, but when im trying to restore it itunes says i cant contact with the host server of updates for ipod. i tried it all i checked the firewall, disabled security system, and im still not being able to restore. i need help please

    Maybe this?
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    Could be an Apple problem to since others have received that message today

  • Transferring a license when lost contact with original owner?

    I bought Production Premium CS3 a while back second hand from ebay. When I bought it they gave me their details that they said I would be able to transfer the license over with. Ive had it installed on my laptop a while now, however I never got round to transferring the license. That was about a year ago and I cant find their details or get in contact with them to help transfer the license over. Is there any way I could still transfer the license over to myself without needing to get in contact with them?

    No. Both sides must provide their info. The more relevant question is, though, whether they actualyl ever registered their software with Adobe. If not, then you have nothing to worry about...
    Mylenium

  • Lost contacts with new update

    Hi,
    For some reason, I lost almost all of my contacts when I updated my phone to the new gingerbread whatever version last night. My phone is set to backup every night with backup assistant, so of course it did so without the majority of my contacts. Is there any way to access previousy backed up versions of my contact list? I'm going crazy trying to figure out where everyone went.
    Thanks!

    Backup Assistance seems to be really acting up for users, I perfer Google to sync my data...   Have you checked Backup Assistance on site to see if the contacts was only removed from the phone?  Verizon Backup Assistant
    May want to consider moving all contacts to Google to avoid this issue.
    1. Log into Verizon Backup Assistant
    2. Click on Export to CSV
    3. Save File as (or Rename to) Contacts (it should already be converted to CSV so including .csv is redundant)
    4. Log into Gmail/Google Voice
    5. Click on Contacts
    6. Click on Import
    7. Browse for the Contacts (.csv) file
    8. Click Import
    Then to disable BA go to Settings / Applications / Manage Application / All Tab / Sync Services / Clear Data...

  • Lost contacts with change to outlook 2007

    I just installed Outlook 2007. I had previously uninstalled 2003 because of a problem. When I synced the first time I lost all of my contacts. Is there a way to recover these contacts?

    Where is your backup from Outlook 2003 created before removing the application and/or before installing Outlook 2007?
    Regardless if installing a new version, maintaining a backup of such important information is important regardless the platform - Windows or OS X but even more important with Windows due to constant virus, adware and spyware concerns.
    Syncing an iPhone or with any such device should not be considered as a backup.
    If the contacts are lost on your iPhone as well as on your computer, without a backup you are SOL.
    You can try restoring your iPhone from your iPhone's backup file but I wouldn't get your hopes up.

  • Asa 5505 DURING set up lost contact with unit

    did setup iaw instructions. got to step 9 where it went into configure mode.  last few messages 
    192.168.1.5 to 192.168.1.1 (BUILT IN BOUND TO TO IDENTIFY),   then
    192.168.1.5 START SSL HANDSHAKE FOR TLSW1 SESSIN, THEN
    192.168.1.5 COMPLETED HANDSHAKE, THEN
    LOGIN PERMITED FROM 192.168.1.5 TO 192.168.1.1/HTTPS,THEN
    BEGIN CONFIGURATION 192.168.1.5 READY FROM HTTP(POST), THEN
    USER ENABLE_15 EXECUTED THE INTERFACE VLAND1 CONNECT,
    THE CONNECTION LOST.
    NOW I am UNABLE TO DO ANYTHING WITH THE 5505.  CAN NOT LOG IN , CAN NOT GET A PING OF 192.168.1.1, CAN NOT GET INTO THE UNIT AND DO A FACTORY RESET
    WHAT TO DO NEXT??????????

    Hello Linda,
    Do you have console access? If you do, try to go to enable there and type "clear config factory" that should bring the factory defaults.
    If you are not able to enter to enable mode (password by default is cisco or blank (type enter)) then you may need to do a password reset on the device and then get there.
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_password_recovery09186a008009478b.shtml
    Let me know if  you still have problems.
    Mike

Maybe you are looking for