Access Table displays the wrong data

I have successfully used Migration Workbench to migrate my tables and data into an oracle 10g database.
I chose Modify Access Database from the MWB options in order to continue to use Access as the Frontend.
At this point the forms do not work.
What I noticed is that the oracle link tables _R have the wrong data in them when opened via Access. But if I query the oracle db the data is correct. I added a primary key but this did not help. Any suggestions ?
Also I had to re load the code modules that run the application they disappeared during the migration process. Is that normal?
Thanks for your help

The table had the wrong columns and the wrong data, basically it was mapped to the wrong table.
I checked the properties from the table detail window, much more helpful than right clicking on the object and choosing properties which only show you the DSN connection. The detailed description as shown below shows the table is incorrect
ODBC;DSN=marilyn2;DBQ=ORCL ;DBA=W;APA=T;EXC=F;FEN=T;QTO=T;FRC=10;FDL=10;LOB=T;RST=T;GDE=F;FRL=F;BAM=IfAllSuccessful;MTS=F;MDI=F;CSR=F;FWC=F;PFC=10;TLO=0;;TABLE=BODYSHOP_EXTRACT.CONTRACTS_INFORMATION_TABLE.
Can I just delete the linked table and import the correct table using Link Manager? Or do I need to use OMWB & Modify Access through the tool?
Last question for today thanks

Similar Messages

Calendar app icon is displaying the wrong date

For some reason on my iPhone's homescreen the icon for the Calendar app has today started displaying the wrong date.
It should show today's date, Monday 6th but instead it reads Sunday 5th.
What confuses me is that the phone does know the date is Monday 6th as the lock screen shows it correctly and also when I actually load the Calendar app it starts on the right date. Also, when I load the multi task bar the Calendar app icon there is correct. See the attached photo, which shows the Calendar app on the home screen (faded, middle left) displaying yesterdays date Sunday 5th, while the app icon in the multi task bar is correct, Monday 6th.
Syncing the calendar with my iMac does not correct the error. Equally, turning the phone off and on again has not sorted it.
Does anyone have any idea what might be causing the fault? And more importantly how to correct it?
Thanks.

Thanks for the suggestion DaVBMan, sadly it didn't work. The only thing that did work was to wait until midnight and it corrected itself. In the mind of the phone it lived a whole day twice and then skipped one completely in order to get back on track. Very odd and also I have since discovered it has happened to a few of my friends too.
It's not happened again so I have no idea what so ever what caused it. Fingers crossed it never recurs.

How do I fix my macbook pro from displaying the wrong dates across the entire system?

Hello, for a while now my MacBook Pro has started to display the dates across the whole system weidly. The dates can go above 300/MM/YYYY. Is it the PRAM battery that could have run out or is it something else? Here is an example that I took today in the Calander application. As you can see it displays the 17 May, 2013 as 137 May 2013.
If there is a solution for this i would really want to know because this is starting to anoy me a little.
Here is an other example from skype
Edit: Ironicaly I found the solution right after posting this, no help is needed any more. Everything is fixed now

Have you looked at System Preferences>Date & Time?
Ciao.

I am trying to have access tables of the Sql Server through the Oracle

I am trying to have access tables of the Sql Server through the Oracle and this being occurred the error:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message: [Generic Connectivity using ODBC][H006] The init parameter <HS_FDS_CONNECT_INFO> is not set.
Please set it in init <orasid>.ora file.
ORA-02063: preceding 2 lines from HSMSQL
I created the ODBC with name HSMSQL.
I made all the configurations in the archives
tnsnames.ora:
HSMSQL=
(DESCRIPTION=
(ADDRESS= (PROTOCOL = tcp)(HOST = wsus)(PORT = 1521))
(CONNECT_DATA =
(SID = HSMSQL)
(HS = OK)
listener.ora:
(SID_DESC = (SID_NAME=HSMSQL)
(ORACLE_HOME= C:\oracle\ora92)
(PROGRAM =hsodbc)
initHS_SID.ora:
HS_FDS_CONNECT_INFO = HSMSQL
HS_FDS_TRACE_LEVEL = OFF
-- Create database link
create database link HSMSQL.US.ORACLE.COM
connect to TESTE identified by TESTE2
using 'HSMSQL';
But when I execute query the error occurs:
Select * from TabTeste@HSMSQL
ORA-28500: connection from ORACLE to a non-Oracle system returned this message: [Generic Connectivity using ODBC][H006] The init parameter <HS_FDS_CONNECT_INFO> is not set.
Please set it in init <orasid>.ora file.
ORA-02063: preceding 2 lines from HSMSQL
Please they help me, thanks, Paulo.

Hi,
It seems that your configuration is Ok. By the way, the workaround for this error is:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for ODBC][H001] The environment variable <HS_FDS_CONNECT_INFO> is not set.
* Set HS_FDS_CONNECT_INFO in the hs{sid}init.ora file to the data source name.
Example: HS_FDS_CONNECT_INFO = <ODBC DataSource Name>
* Make sure the hs{sid}init.ora file exists in the ORACLE_HOME/hs/admin directory and has the same name as the SID in the LISTENER.ORA.
Example: If SID=hsodbc in the listener.ora file, then the hs{sid}init.ora file would be named ORACLE_HOME/hs/admin/inithsodbc.ora
For more information see if this [url http://forums.oracle.com/forums/thread.jspa?forumID=61&threadID=576975]thread can help you.
Cheers

TO Display the row data as column in ALV

Hi experts ,
Need to display the row data in ALV as column.
The column of an ALV has the fieldnames of a table , this needs to be displayed as row data , that is as single row.
How can this can be achieved?

Hi,
Actually it is not possible to disaply in multiple lines.
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FforumID%3D50%26threadID%3D49517%26messageID%3D506378%23506378
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FforumID%3D50%26threadID%3D41133%26messageID%3D403371%23403371
This problem was discussed many times in this forum, u can search for more results.

How to display the header data on different position in alv report

hi all,
how to display the header data on different position in alv report.
for example ,
customer                                                   name
xxxx                                                         xxxx
                 vendor        name     street
                  xxxx         xxxx      xxxxx
pls   help me .

hi
as per my understanding you need to trnasfer header internal table data to pdf..
please check the following links for internal table to pdf..
Convertion of Internal table data to PDF
This link is related to ur issue
Re: how to insert the calling of the FM: OTF to PDF
Thanks

How to display the current Date and time in xslt version 1

i am using xslt version 1 .i want to display the current date and time in the output xml using xslt(Jdeveloper) ..i just added the namespace xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:ns1="urn:oracle:integration:b2b:7D30046DC68A4FA689956D8241FA3B99">
and used thsi function <xsl:value-of select = "xp20:current-date()"/>
but it does not works for me ..help needed????
Edited by: user9519185 on Jan 20, 2009 3:04 AM

Use a formula: =NOW()
Format the cell for Date and Time, with both the Date part and the Time part displayed. Format the two parts as you wish, using the choices in the Inspector's menus.
The cell will update each time the table is recalculated.
(Description is for Numbers '09 (Mac), Numbers for iOS will be similar, but not necessarly identical in details.)
Regards,
Barry

How we will display the header data and item data seperately in lists

how we will display the header data and item data seperately in lists

REPORT z_alv_list_block.
TYPE-POOLS: slis. " ALV Global types
SELECTION-SCREEN :
SKIP,
BEGIN OF LINE,
COMMENT 5(27) v_1 FOR FIELD p_max. "#EC NEEDED
PARAMETERS p_max(2) TYPE n DEFAULT '02' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
DATA:
1st Table
BEGIN OF gt_kna1 OCCURS 0, " Data displayed
kunnr LIKE kna1-kunnr, " Customer number
ernam LIKE kna1-ernam, " Name of Person who Created
erdat LIKE kna1-erdat, " Creation date
name1 LIKE kna1-name1, " Name 1
END OF gt_kna1,
2nd Table
BEGIN OF gt_mara OCCURS 0,
ernam LIKE mara-ernam, " Name of Person who Created
matnr LIKE mara-matnr, " Material number
ersda LIKE mara-e rsda, " Creation date
brgew LIKE mara-brgew, " Gross weight
END OF gt_mara,
3rd Table
BEGIN OF gt_vbak OCCURS 0,
vkorg LIKE vbak-vkorg, " Sales organization
kunnr LIKE vbak-kunnr, " Sold-to party
vbeln LIKE vbak-vbeln, " Sales document
netwr LIKE vbak-netwr, " Net Value of the Sales Order
waerk LIKE vbak-waerk, " SD document currency
END OF gt_vbak.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
Read data
SELECT * FROM kna1
UP TO p_max ROWS
INTO CORRESPONDING FIELDS OF TABLE gt_kna1.
SELECT * FROM mara
UP TO p_max ROWS
INTO CORRESPONDING FIELDS OF TABLE gt_mara.
SELECT * FROM vbak
UP TO p_max ROWS
INTO CORRESPONDING FIELDS OF TABLE gt_vbak.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = sy-cprog
i_callback_user_command = 'USER_COMMAND'.
PERFORM list_append TABLES gt_kna1
USING '1'
'GT_KNA1'.
PERFORM list_append TABLES gt_mara
USING '2'
'GT_MARA'.
PERFORM list_append TABLES gt_vbak
USING '3'
'GT_VBAK'.
PERFORM f_list_display.
FORM USER_COMMAND *
FORM user_command USING i_ucomm LIKE sy-ucomm
is_selfield TYPE slis_selfield. "#EC CALLED
CASE i_ucomm.
WHEN '&IC1'. " Pick
CASE is_selfield-tabname.
WHEN 'GT_MARA'.
WHEN 'GT_KNA1'.
WHEN 'GT_VBAK'.
READ TABLE gt_vbak INDEX is_selfield-tabindex.
IF sy-subrc EQ 0.
Sales order number
SET PARAMETER ID 'AUN' FIELD gt_vbak-vbeln.
Display Sales Order
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDCASE.
ENDFORM. " USER_COMMAND
----< /div>
Form list_append
FORM list_append TABLES ut_table
USING u_no TYPE char1
u_tabname TYPE slis_tabname.
Macro definition
DEFINE m_fieldcat.
ls_fieldcat-fieldname = &1.
ls_fieldcat-ref_tabname = &2.
append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
ls_sort-fieldname = &1.
ls_sort-up = 'X'.
append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA :
ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat TYPE slis_t_fieldcat_alv, " Field catalog
ls_sort TYPE slis_sortinfo_alv,
lt_sort TYPE slis_t_sortinfo_alv. " Sort table
DATA:
lt_events TYPE slis_t_event,
ls_event TYPE slis_alv_event,
ls_layout TYPE slis_layout_alv.
ls_layout-group_change_edit = 'X'.
ls_layout-colwidth_optimize = 'X'.
ls_layout-zebra = 'X'.
ls_layout-detail_popup = 'X'.
ls_layout-get_selinfos = 'X'.
ls_layout-max_linesize = '200'.
CASE u_no.
WHEN '1'.
Build field catalog and sort table
m_fieldcat 'KUNNR' 'KNA1'.
m_fieldcat 'ERNAM' 'KNA1'.
m_fieldcat 'ERDAT' 'KNA1'.
m_fieldcat 'NAME1' 'KNA1'.
m_sort 'KUNNR'.
WHEN '2'.
m_fieldcat 'MATNR' 'MARA'.
m_fieldcat 'ERNAM' 'MARA'.
m_fieldcat 'ERSDA' 'MARA'.
m_fieldcat 'BRGEW' 'MARA'.
m_sort 'MATNR'.
WHEN '3'.
m_fieldcat 'VBELN' 'VBAK'.
m_fieldcat 'VKORG' 'VBAK'.
m_fieldcat 'KUNNR' 'VBAK'.
m_fieldcat 'NETWR' 'VBAK'.
m_fieldcat 'WAERK' 'VBAK'.
m_sort 'VBELN'.
ENDCASE.
IF u_no CA '13'.
MOVE 'TOP_OF_PAGE' TO ls_event-name.
CONCATENATE 'TOP_OF_PAGE' u_no INTO ls_event-form.
APPEND ls_event TO lt_events.
ELSE.
MOVE 'TOP_OF_LIST' TO ls_event-name.
CONCATENATE 'TOP_OF_LIST' u_no INTO ls_event-form.
APPEND ls_event TO lt_events.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
it_fieldcat = lt_fieldcat
is_layout = ls_layout
i_tabname = u_tabname
it_events = lt_events
it_sort = lt_sort
i_text =
TABLES
t_outtab = ut_table
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " LIST_APPEND
Form f_list_display
FORM f_list_display.
DATA ls_print TYPE slis_print_alv.
ls_print-no_print_selinfos = 'X'. " Display no selection infos
ls_print-no_print_listinfos = 'X'. " Display no listinfos
ls_print-reserve_lines = 2. " Lines reserved for end of page
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
i_interface_check = ' '
is_print = ls_print
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " F_LIST_DISPLAY
FORM top_of_page1 *
FORM top_of_page1. "#EC CALLED
PERFORM top_of_page.
ENDFORM.
FORM top_of_page3 *
FORM top_of_page3. "#EC CALLED
PERFORM top_of_page.
ENDFORM.
FORM top_of_page *
FORM top_of_page.
ULINE.
WRITE : sy-uname, sy-title(56) CENTERED, sy-datum.
ULINE.
ENDFORM.
FORM top_of_list2 *
FORM top_of_list2. "#EC CALLED
WRITE 'TOP OF LIST2'.
ENDFORM.
END OF PROGRAM Z_ALV_LIST_BLOCK ***********************

To display the reschedule date from MD04

Hi Gurus,
There is a current report which dispalys details of a scheduling agreement (order / due date,schd. qty,qty shipped & qty received). Now user wants to add the reschedule date field which is in MD04 to the report.
Is it possible to display the reschedule date to the report. If so, can you please guide me how to proceed further.Thanks.

Hi,
Actually rescheduling date is displayed in MRP list, The system only displays rescheduling date in the the current stock/requirements list if you trigger rescheduling with the appropriate function. As you all know MRP list is static report. Hence the reschedule date will store in the table as i have mentioned in the table MDEZ as i have mentioned in the earlier reply.T he program bname is SAPMM61R. Please join this table in your query to get rescheduling date. Thanking you.

Urgent BEX Report Showing the Wrong data

Hi Experts,
In my Cube the data is available curreclty, but where as my bex report showing the wrong data.
like xeample:
Infocube
Material               Plant    Year    Units Qty
000000000002001032     003     2006     BAG   1,500
But in bex i took the same selection's, but it displays as
000000000002001032     003     2006     BAG   2
i am Unable to trace this
any help plzzz
Anil

Hi,
since Quantity(units PC??) can not be in decimals,Bex will round off 1.5 to 2 in bex report.
Use NODIM function i.e. NODIM(Qty) instead of Quantity.
NODIM function is available under data functions of Formula builder.
From context menu fo KF structure>new formula>NODIM(Qty).
or
try by setting Decimal places to 2 or 3 in KF properties in Bex Query.
hope this helps.
Message was edited by: Murali

Why does the iphone 5 always display the wrong time

why does the iphone 5 always display the wrong time

I had similar problem. My iPhone was always about 3 minutes faster than the correct time here in the UK which I found to be very irritating. It just came to a head because here in the UK we have just changed from British Summer Time back to standard GMT. This actually worked automatically except that the iPhone time still showed it to be about 3 minutes faster than GMT. However I have now cured the problem (almost) by going to
Settings/General/ Date & Time/ and then selected the "Set Automatically" button.
The clock then immediately jumped back 3 minutes and now the iPhone time is only about 10 seconds slow which is good enough for me.

How to find out Which LineItem is having the wrong data

Hi All,
This is Idoc--File scenario
Iam sending the Idoc from R/3 and it may have several Line items and related data.
If One line item data is wrong also the Idoc will be errored Out in MONI,for this i used UDF in mapping to through the Exceptions. So i have to goto WE05 in R/3 and i have to check each and every line item for wrong data and then i will repost it.
the thing is how can i find out the Particular line item is caused for this Error.
REgards

Hi Sarvesh,
No, in MONI it will not take us to the correct Lineitem which is having the wrong data.
That is only the problem here.
Any Views.........
Regards

Calendar List view shows entries under the wrong date

I just upgraded to iOS4 and finding that my calendar entries are appearing under the wrong date in the calendar list view when I am viewing two calendars.
- List view is ok when viewing 1 calendar
- Day and Month views are ok at all times (ie: viewing single or multiple calendars)
- I have 2 Exchange accounts
- Calendar entries are appearing in the correct order, but under the incorrect date heading.
- When I intially added the Exchange accounts the calendar list view was fine at first (I could see both calendars correctly in list view) but after a short time later it became screwed up.
Anyone else experience this?

Same problem here since my upgrade to iOS4 - but I only noticed today.
I have 3 calendars set up:
Gmail (Exchange)
UK Holidays (iCal)
Birthdays
The exchange calendar is always wrong but the other two are correct when my exchange calendar is switched off.
It has mucked up my scheduling a bit for the next month. I only became suspicious when I noticed the Scottish Bank Holiday Monday at the beginning of August was showing on FRIDAY, 30th of July!

Mail app displays the wrong Inbox when you open it.

This problem can be easily reproduced if you have more than one email account configured in iOS 4.x
It should be extremely simple to fix with the next update. I see that this same problem has been mentioned before, but I couldn't update that thread because it's "archived." If you want Apple to fix this, please report the issue to Apple using one or more of the links below:
http://www.apple.com/feedback/ipodtouch.html
http://www.apple.com/feedback/iphone.html
http://www.apple.com/feedback/ipad.html (not sure if iPad Mail app is affected)
Here's what I submitted...
Subject:
Simple software design issue in Mail app.
Feedback Type:
Design/Ease of Use
Comments:
Thanks for your work on making iOS better and better with each update! There is no option to provide general iOS feedback, so I'll submit this under "iPhone" and "iPod." I'm currently using the latest iOS (4.3.1).
The native Mail app in iOS has had the Unified Inbox feature since iOS 4.0, which is very useful. However, there is a minor design flaw that could be easily resolved with a software update.
My setup:
I have 3 Exchange accounts on my device (Hotmail, Gmail[Default], Work). The Hotmail Inbox is empty at least 98% of the time because my Gmail account periodically downloads the messages. The only reason I have the Hotmail account entered on my device is to make sure I can see a message in "All Inboxes" even before my Google account retrieves it. On my device, the Gmail account is set as default for Mail and Contacts.
The problem:
I never intentionally select the Inbox for the Hotmail account because it should almost always be empty. I would simply view "All Inboxes." Still, half the time I open the Mail app, it shows the empty Hotmail Inbox. This is very annoying!
I finally figured out how to reproduce it consistently:
(must have more than one account configured)
1) Launch the Mail app and back-up to the screen that shows the list of accounts / Inboxes (I usually try to leave it here when I'm done, hoping to see that screen the next time I open Mail).
2) Without selecting a specific account or Inbox, push the Home button to exit the Mail app.
3) Kill the Mail process from the multi-tasking menu.
4) Open Mail again
Mail will show whichever Inbox comes immediately after "All Inboxes", even if it's not your default account. In my case, it starts in the empty Hotmail Inbox every time...a folder that I never intentionally select. Each time, I have to go back to the list and tap "All Inboxes."
So, if I leave Mail on the root screen before killing the process, it consistently displays the wrong Inbox the next time I open it. If I select an Inbox or "All Inboxes," it will remember that selection and show me that screen the next time I open Mail.
What it should do:
When Mail doesn't know which Inbox to display, it should...
A. Start on the root screen with the list of accounts and Inboxes (preferred option).
or B. Start in "All Inboxes" (secondary preference).
or C. Start in the Inbox of the default account (not preferred, but better than showing an empty/unused Inbox).
Thank you!
Message was edited by: Ichinisan
(not sure if iPad Mail app is affected)
Message was edited by: Ichinisan
Message was edited by: Ichinisan

Try this...
Launch the Mail app.
Navigate to the "Mailboxes" page (the page that lists all of your accounts).
Tap "Edit" in the top right corner.
Scroll down to the bottom section of the page, titled "ACCOUNTS".
Drag the triple-bars on the right to reorder the accounts listed. The first account listed will be the one that the app launches to.
Hope this helps, I went crazy trying to figure that out and it worked for me.

Why is RoboHelp not displaying the required data content of .chm when linked as Help in my App ?

Gorgeous Hello All,
Has anyone encountered the below-said show- stopper. Another BIG TIME help required, will help me in tremendous fashion.
Am using Adobe RoboHelp, Version 10 and IE version being 10.
In my local machine :
1.)I have completed my technical writing courtesy Design editor
2.)Generating chm File : View -> Pods –> Single Source Layouts -> Right Click on Microsoft HTML Help -> Tagged Set as Primary Layout
3.)Generating Primary Layout : File -> Generate -> Primary Layout (Microsoft HTML Help)…
4.)Viewing Primary Layout : File -> View -> Primary Layout
Everything works FANTASTICALLY till here with the required output (as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary and with the data contents)
Show Stopper, At my Application Server :
5.)I copy the entire robohelp project folder from my local machine to my application Server path
6.)My Application has been developed in ASP .NET, Version 4.0.
7.)Help link has been created in this application wherein here the file name of < >.chm has been linked in the code to be read from the Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\
8.)I login into my above-said application -> click on the Help page -> Displays the required structure /buttons as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary
a.)Clicking on any of the Books or Topics appearing beneath Contents : The System prompts out with error cautionary message called “ Navigation to the webpage was cancelled. What you can try: Retype the address ”
*** This is a huge SHOW-STOPPER. I spent plenty of hours on this, but unable to deciper with a solution at all) ***
( Note : Am able to directly open and read the required data contents by Clicking on any of the Books or Topics appearing beneath Contents from Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\ < >.chm )
Why is the RoboHelp not displaying the required data contents of <>.chm when linked as Help in my Application ?
Cheese – Vipin Nambiar

If you looked at the error message and searched the forum, you should find the answer as this is a problem that started in 2005. You should not run CHM files from a server and cannot without editing the users registry. See the page below.
http://www.grainge.org/pages/authoring/chm_mspatch/896358.htm
All along your questions have been based on webhelp, why suddenly are we going go CHMs.
See Snippets on my site for the correct form of help to use in different scenarios.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Access Table displays the wrong data

Similar Messages

Maybe you are looking for