Access the Log of appropriation days after

Dear Experts.
I want access the log of KO8G/KO88.But it will be done days after. Then I went in the SLG00, and did to try by user and transaction CODE KO8G. I don´t have sucess.
Then continuing my search, I found the SLG00. Here i´ve that active the object and subobject for this process(KO88/KO8G).
But I don´t konw that OBJECT to reference THE INDIVIDUAL APROPRIATION(KO88) and COLETIVE APPROPRIATION(KO8G).
Someone Know does how to do it?
Thanks a lot.

Thank You.
But I found the Object e Subobject throught of table Vbal. In this may case are COAC and KOAO.
Anyway, thank you.

Similar Messages

I am not able to access the internet without wi-fi after updated to iOS 7.0.4. Please help!

I am not able to access the internet without wi-fi after updated to iOS 7.0.4. Please help!

Hello sweetracy,
The following article can help restore and stabilize your cellular data connection.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/TS3780
Cheers,
Allen

How to access the result list in teststand after execution using labwindows/cvi

I am developing a user interface in labwindows/cvi that runs multiple teststand sequence files and would like to combine their reports (generated in teststand) into a single file at the end of a UUT. What is the best way to do this? At the moment, I'm trying to access the result list local variable after the execution has ended using API calls from labwindows/cvi and an end-of-execution callback event but those run-time variables do not exist anymore. How do I get a hold of the result list array at the end of an execution? I would like to grab this variable and pass it along from sequence to sequence using labwindows/cvi and not teststand itself. Is this possible? Any help would be great.
Thanks in advance,
Luis

Hey Luis,
Check out the response to this thread at the NI TestStand board here!

Sun x4170 ILOM - Can't get to the web interface 2 days after password reset

Just bought a used x4170. I was able to get iLOM on the network and get to the web interface logon screen after setting the IP for it.
I tried logging on but the password was not given to me. So I connected to the serial interface (rj45) from another machine and used putty to connect. Got to the preboot point and was able to reset the password to default, Rebooted.
I was then able to log into iLOM. That was 2 days ago. Today for some reason, I can't get into iLOM. It pings but I can't get to the web interface. I get the IE error "cannot connect" or unable to connect or something like that.
I'm completely new to this brand of server so consider me completely ignorant on all aspects of the hardware.......lol
Thanks

Hello
By default, you connect to the server’s service processor (SP) using the out-of-band network management port (NET MGT). The ILOM sideband management feature enables you to select either the NET MGT port or one of the server’s Gigabit Ethernet ports (NET 0, 1, 2, 3), which are in-band ports, to send and receive ILOM commands to and from the server SP. In-band ports are also called sideband ports.
You can refer more here : https://docs.oracle.com/cd/E19269-01/820-7959-11/820-7959-11.pdf
If you want to use the NET MGT port of ILOM, then your output should display similar to below
-> show /SP/network
/SP/network
    Targets:
        interconnect
        ipv6
        test
    Properties:
        commitpending = (Cannot show property)
        dhcp_clientid = none
        dhcp_server_ip = xxxxxxxxx
        ipaddress = xxxxxxxxx
        ipdiscovery = dhcp
        ipgateway = xxxxxxxxx
        ipnetmask = xxxxxxxxx
        macaddress = 00:10:E0:65:2F:20
        managementport = MGMT   <<<<<<<<<<<<<<
        outofbandmacaddress = 00:10:E0:65:2F:20
        pendingipaddress = xxxxxxxxx
        pendingipdiscovery = dhcp
        pendingipgateway = xxxxxxxxx
        pendingipnetmask = xxxxxxxxx
        pendingmanagementport = MGMT    <<<<<<<<<<<<
        pendingvlan_id = (none)
        sidebandmacaddress = 00:10:E0:65:2F:21
        state = enabled
        vlan_id = (none)
Hope this helps.
Best Regards
Bhavyesh

How to check the date with current day after 5 days

Hello,
I need to make the visible of delete button in my struts application. I've application in which user can be deactivated. If the user is deactivated and the admin can't delete the user for the specific period of time (set in property file). while deactivating the user, system time is set. and 5 days after the system time's set, i need to make the button visible.
This is my code.
Calendar cal = Calendar.getInstance();
Date deActivatedDate = null;
deActivatedDate =new Date(userData.getDeActivatedTime().getTime());// Set it in the Calendar object
cal.setTime(deActivatedDate); // Add 5 days
cal.add(Calendar.DATE, 5);// get the current date
Calendar currentCal = Calendar.getInstance();
Date currentDate = new Date();
currentCal.setTime(currentDate);// check if the de-activation time is over.
if (cal.get(Calendar.DATE) < currentCal.get(Calendar.DATE)) {
userData.setDeletionAllowed(true);}
can anyone help to solve this issue?

What's the problem with the code that you posted?

Where can the log file be found after printing to the PDF printer?

Cannot locate the log file after printing to the Adobe PDF printer. The box was unchecked for delete log file after successful print. Running Adobe Acrobat X Standard (v10.0.0) on a windows 2008 R2 server.

There is usually no log file when the conversion succeeds. Only in certain cases are their warning or information messages, usually of little interest.

How can we access the logged in SSO user email address in websheet app

Is there any way where we can find the email address of the logged in SSO user, do we have any variables which we can use and if so how can we use in our websheet application?
could any please guide me on this
thanks
srinivas p.

You can't access it directly. But your applet can make net connections to the server, and the server can provide that kind of functionality. Generally this is easiest by making HTTP connections and having the server provide the functionality via the web server. (So in your case, JSPs or servlets on the server would list/deliver/create/modify/delete files, and the applets would invoke those JSPs and servlets.

How and where to access the logs in OpenUI5

If I am using logging in OpenUI5 with
jQuery.sap.log.info debug etc then where can see these logs when I run web page ,it does not come on console.

I expect it's due to the logging level, the default setting for the productive minified javascript is Error, so will only display the FATAL or ERROR messages in the console.
If you switch to use the -dbg version the ldefault logging level is DEBUG, so should display your logging.
https://openui5.hana.ondemand.com/docs/guide/Configuration.html
logLevel
0|1|2|3|4|5|6| NONE|FATAL|ERROR| WARNING|INFO|DEBUG|ALL
ERROR
Sets the log level to the given value. For minified (productive) sources, the default level is ERROR, for debug sources it is DEBUG. At runtime, the log level can be modified with Â jQuery.sap.log.setLevel
Regards,
Jason

Can't access the Logging Items section of the Log and Transfer window.

Yesterday I was able to select and ingest clips and rename clips from my Canon Vixia SFH11 camcorder using the logging items section of the log and transfer window in FCP 7. Today, that section of the L&T window is gone! and every time I try and change a clip name or rename a clip it either ignores the change or it tries to save the new clip with a higher numbered name (ie. Clip #102, Clip # 103).
I know if must be a setting that I am missing or a procedure I skipped.
I want my logging items section back!
I've restarted and tried rebooting to no avail. Anybody have a clue?

Hi -
If you are missing both panes of the Log and Transfer window, you may have swiped the dividing bar over to the side to display one pane only.
Place your cursor over the bar on the side (you'll see the cursor switch to a reposition indicator)
!http://www.spotsbeforeyoureyes.com/L%26TPreWindow2.jpg!
and pull it back to the middle:
!http://www.spotsbeforeyoureyes.com/L%26TPreWindow1.jpg!
Hope this helps.

Why can't I access the songs on my ipod after the software update?

I own three ipods (60G video, 30G video, and 4g mini) which I load on three different computers. I manually update them. I load music from my CD collection and they eacg have different music on them. The 30G was a recent purchase (used) and the first time that I hooked it up it required that I update my software (I have only done this on one of my computers). After the update, when the Ipod loads, the itunes shows the number of songs on the ipod but will not display the actual songs. None of the songs on the ipod are in any of my existing libraries as I tend to clear the librarries after loading the songs so that i do not fill up my computers with this stuff. Is there some setting that I should change to be able to view and modify these old songs on my Ipod short of blowing them all out and starting AGAIN? My Ipod video probably has 8,000 songs on it so I am not thrilled about starting again. Also, i can no longer play them through my computer because it will not pull up the list. Any advice would be appeciated. Thanks

Such a simple fix. I really did look at a lot of reference stuff to find the answer but could not.
true story ... back in the day, it took me about 20-30 minutes of quiet desperation to work out what the new rules for this were with the 7.0.x versions ...
i defer to Zevoneer when it comes to recovering music off an ipod. his post here may be of some assistance:
http://discussions.apple.com/thread.jspa?messageID=3741395#3741395

For the past week I am unable to access the web using firefox even after downloading it again, why?

When I click on the firefox icon it was not opening up or it would open then say unable to make connection. I had no problem using Internet explorer. So I thought I should download Mozilla firefox again and I did. It seemed to be functioning but then reverted back to nonresponsive. I am able to contact you using internet explorer. What can i do?

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

ESPN will not let me log in. When accessing the log on page, it provides a red-text message saying cookies must be enabled to log in.

I have cleared cookies as well as attempted to log on in FF's Safe Mode and still get the same issues. Issue does not exist in IE.
-FF v. 23.0.1
-Windows8
-Lenovo Ideapad Y500

This problem of nowhere to sign into ESPN site just started today at noon my time; had no problem visiting it earlier in day. Even allowing its third-party cookies no help. ESPN has flickered and frozen briefly in the past with some kind of Flash Shockwave cited I think (I use your Flash Block add-on); could there be a problem there somewhere?

Issue while accessing the SharePoint site - SharePoint 2010 - after Password update

SharePoint site is working until we update the password(as it is expiring, we have created a new password) .
We have updated the password in central admin.
After password update, getting the below
error.
Exception
Details: System.InvalidOperationException: Operation is not valid due to the
current state of the object.
[InvalidOperationException: Operation is not
valid due to the current state of the object.]
Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext
context) +26890024
Microsoft.SharePoint.Utilities.SPUtility.DetermineLayoutsUrl(SPWeb overrideWeb,
HttpContext context, Boolean includeLCID, Boolean doNotInitWeb) +252
Microsoft.SharePoint.Utilities.SPUtility.DetermineRedirectUrl(String
urlProposed, SPRedirectFlags flags, HttpContext context, SPWeb overrideWeb,
String queryString, String& urlRedirect) +616
Microsoft.SharePoint.Utilities.SPUtility.Redirect(String url, SPRedirectFlags
flags, HttpContext context, String queryString) +98
Microsoft.SharePoint.Utilities.SPUtility.HandleAccessDenied(HttpContext context)
+1077
Microsoft.SharePoint.IdentityModel.SPFederationAuthenticationModule.OnEndRequest(Object
sender, EventArgs args) +693
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
+80
System.Web.HttpApplication.ExecuteStep(IExecutionStep step,
Boolean& completedSynchronously)
+171
We have gone through different articles and did below steps but there is no resolution for us
1) Verified all the SharePoint services in central admin and configured the updated service account to all the services.
2) Removed the SharePoint content DB and attached it again.
Could you please provide any pointers?
Marulasiddappa SB (Swamy)

Hi,
Please refer to Justin’s blog and see if it helps:
http://www.justinkobel.com/post/2012/04/30/SharePoint-2010-Claims%E2%80%93Operation-is-not-valid-due-to-the-current-state-of-the-object.aspx
As suggested by Alex, please provide more information about your process of changing password.
Here is an article for updating passwords on SharePoint 2010:
http://blogs.technet.com/b/seanearp/archive/2011/01/25/updating-passwords-on-sharepoint-2010.aspx
Regards,
Rebecca Tu
TechNet Community Support

Using Acrobat 11.0.10 Win7 64 bit - cannot convert PDF to word, message states "an error occurred while trying to access the service", worked 2 days ago, please advise

Also get an error trying to log out of ExportPDF. I know this issue has been ongoing since last year. Does anyone have a verified solution? Thanks.

Hi jamess8859203,
We have seen this particular error when signing in from Adobe Reader. Are you able to log in via the web interface at https://cloud.acrobat.com?
Best,
Sara

Has anyone else had Messages and Mail lock up and then crash after doing the iOS 8.2 update? Rather, has anyone else had Messages and Mail lock up and then crash for the first time a day after doing the iOS 8.2 update?

I have a 64 gig second gen iPad mini that I updated to iOS 8.2 yesterday with no initial problems. You're probably thinking all's good right? Wrong.
All was good until about an hour ago. When I saw a text notification on the lock screen I swiped right thinking that it wouldn't act any differently from the countless other times that I've done that same action...little did I realize that it would lock up once unlocked. To clarify, when I say "locked up" I mean frozen with nothing on the screen except for the basic design of Messages.

Not experienced an issue with my iPad Mini, and I've been running iOS 8.2 since it came out.
What troubleshooting have you tried since the device froze? Is it still froze? First step would be to try and power off the device. If that does not help, then perform a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The device will reboot, and it will have no affect on your data. That should correct things, but if it doesn't, then the next steps are a restore from backup, and if necessary a restore as new.

Access the Log of appropriation days after

Similar Messages

Maybe you are looking for