Access to a external time capsule through my home time capsule
How can I access my parents timecapsule through my own at home?
I have no problems in accessing my own time capsule through for example the network at work (using Automator - and a quite old apple Airport/router).
But if I'm at home, and on the home network established through my own time cap, I can't get access to i.e. my parents time cap - again using Automator.
Also I can't get access to my own time capsule through my parents time capsule...
WHY????
...and what can I do?
The answer I get is:
The server may not be available or is not available right now. Check the server name or IP address, check your network connection, and then try again.
If this is still actual:
The easiest and cheapest you can do is to connect your Macbook to your amplifier. There are several options for that. If your Macbook has optical out (in the headphone/line-out connector), use that for best quality. Otherwise, use a USB DAC or a Griffin iMic. Alternatively, get a DisplayPort to HDMI converter, and use one of your amplifiers HDMI inputs (in that case all you need is a nice external display or a projector and you have yourself the beginning of a home cinema).
Similar Messages
-
My MacBook w/ OSX 10.6.8 cannot access my external Time Machine Backup USB Drive. It says it is a Read Only drive. When I went to change permissions I found all pernissions were listed as "Custom" and I could not reset them to "Read Write". Any help would be appreciated.
This can be done easily with ethernet.
Please follow the instructions strictly.
To make it easier I want you to do this overnight so you can turn off all your current connection to the internet.
Just go to the airport fan in to the top right and turn airport off.
Get ethernet cable and connect the laptop to the TC lan port.. ie <-> ones.
Press and hold the reset on the TC for about 10sec. until the front led flashes rapidly.
Open the airport utility.. go to manual setup and change the wireless to off. (so other people around you cannot join your network of one).
Ignore all the errors.. they won't stop the backup working.
Go to the TM and reselect the backup target disk as the TC.
It should start after 2min and run through to completion.
That is it.. for a backup of many GB it might take a few hours.. so make sure the laptop has power plugged in and the sleep is off.. (on early ones I think this is needed but I am a late arrival to the scene).. sleep doesn't affect later OS. -
How do you access files on your time capsule from your mac?
how do you access files on your time capsule from your mac?
i had an old macbook pro that i had all the pictures on and i backed it up to my time capsule through time machine. i got a new macbook pro retina display recently and im wanting to see if i can get some of the pictures off of my time capsule now but i dont want all of them.
-
How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.
The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network. -
Access files stored in Time Capsule via iCloud
how to access files stored in Time Capsule via iCloud
Yes, you can remotely access files in the TC..
Did you read the apple instructions and do them??
http://www.apple.com/au/support/icloud/back-to-my-mac/
It does depend on the main router being upnp or NAT-PMP capable.. so the best is if the TC is the main router.. otherwise you may have to manually forward the ports. -
Can i access my data on time capsule from some other network
can i access my data on time capsule from some other network that is my data at home from office over internet
There is plenty of info out there if you google..
Here is a summary I just put into another thread.
Remote access has been added back into iCloud that was in MobileMe..
Read the info on setting it up from cloud service.. BTMM.
http://www.apple.com/support/icloud/back-to-my-mac/
If you want to do it without the cloud service, you have one major issue.. the public IP for WAN..
The internal IP of the TC.. which will default to 10.0.1.1 btw.. is irrelevant. It is the IP of the WAN which you use to access the TC over the internet. And here you have a problem.. the TC does not include dyndns service. So unless you have a static IP address from your ISP, this will cause you grief.
(If it is offered by your ISP.. get a static IP.. that eliminates all the issues.. and is far superior. Even dyndns service has issues if your public IP rotates too often. It is generally an extra cost item and requires a business account but some ISP offer it cheap or even free.. I joined an ISP that offered static ip for free because it gives me the ability to remote access my network without all the hassles you will see below.)
There are ways around it.. setting up your own domain for instance.
http://dyn.com/support/airport-time-capsule-with-dynamic-dns/
But it is easier to simply use a different router.. almost all of them have dyndns service available.. place the TC behind the router in bridge and forward port 548 TCP to it.
This is a bit old but still relevant.
http://gigaom.com/apple/access-your-time-capsule-over-the-internet/
Note .. there is no ftp, http, ssh (there is actually but it isn't accessible), or any other service to allow connection other than AFP.. so you must use a Mac in remote location to access the TC.
The setup for the two methods is slightly different in the TC.. in the first instance, you need to turn on WAN access via disk sharing page in the manual setup.
In the second case you do not need this.
Remember security and put strong passwords on the disk. There are still security questions about this.
If security is important.. there is a third and better (IMO) method and that is vpn.. you will need to buy a vpn router as TC also missed out on that.. establish a vpn with the main router and that will allow you access to your network.. you will also then be able to use SMB remotely not just AFP.
Also if this office is a large company they should be running a firewall, which would block your access to home. You should check your IT admin people for what is allowed.. generally the only acceptable method is vpn otherwise you can drag viruses and trojans right into the network without the firewall catching them. -
Accessing CPU clocks or system timers through java
Hello ,
We want to get access to system CPU clock which should run even when the system is shutdown. Additionally first time it should be set by a java program and it should run for some specific days amount of time . It should remain unaffected if the external user changes the system time displayed. Can it be possible through any means in java ???Hi
we are designing an application which should run only for 15 consecutive days,we dont want the user to hack it by any means by changing the system time,so we want to have access to the system time which works with the help of battery backup or some other means by which we can detect whether the user has altered the system time. -
Access of possibly undefined property number through a reference with static type...
Hello everyone !
I run into this problem today ... take a look on the code :
import com.trick7.effects.TeraFire;
for (var j:uint=0; j<10; j++) {
var fire:TeraFire = new TeraFire();
fire.x = j * 40 + 20;
fire.y = 100;
fire.number = j; //This line is causeing the problem
addChild(fire);
fire.buttonMode = true;
TeraFire class creates fire particles. The compiler error is :
Scene 1, Layer 'Layer 1', Frame 1, Line 7
1119: Access of possibly undefined property number through a reference with static type com.trick7.effects:TeraFire.
Anyone can help me to find a solution to this problem.
I can do that ".number" with a movieclip but not in this case. What can I do ?I borrowed that class from the internet.
I made the changes you suggested: imported flash.Display.MovieClip and also made the class extend MovieClip.
The error is still throwing in compiler errors. I am not really good enough to edit this class because there are some functions I don't still understand very good. This is the class below:
package com.trick7.effects{
import flash.display.BitmapData;
import flash.display.GradientType;
import flash.display.MovieClip;
import flash.events.Event;
import flash.filters.DisplacementMapFilter;
import flash.filters.DisplacementMapFilterMode;
import flash.geom.Matrix;
import flash.geom.Point;
import flash.geom.Rectangle;
public class TeraFire extends MovieClip{
public var phaseRateX:Number;
public var phaseRateY:Number;
private var offsets:Array= [new Point(),new Point()];
private var seed:Number = Math.random();
private var fireW:Number;
private var fireH:Number;
//火の色
//private var fireColorIn:uint;
//private var fireColorOut:uint;
private var ball:Sprite;
private var gradientImage:BitmapData;
private var displaceImage:BitmapData;
private var focalPointRatio:Number = 0.6;
private const margin:int = 10;
private var rdm:Number;
public function TeraFire(xPos:Number=0, yPos:Number=0, fireWidth:Number=30, fireHeight:Number=90, fireColorIn:uint = 0xFFCC00,fireColorOut:uint = 0xE22D09){
fireW = fireWidth;
fireH = fireHeight;
phaseRateX = 0;
phaseRateY = 5;
var matrix:Matrix = new Matrix();
matrix.createGradientBox(fireW,fireH,Math.PI/2,-fireW/2,-fireH*(focalPointRatio+1)/2);
var colors:Array = [fireColorIn, fireColorOut, fireColorOut];
var alphas:Array = [1,1,0];
var ratios:Array = [30, 100, 220];
var home:Sprite = new Sprite();
ball = new Sprite();
ball.graphics.beginGradientFill(GradientType.RADIAL,colors, alphas, ratios, matrix,"pad","rgb",focalPointRatio);
ball.graphics.drawEllipse(-fireW/2,-fireH*(focalPointRatio+1)/2,fireW,fireH);
ball.graphics.endFill();
//余白確保用透明矩形
ball.graphics.beginFill(0x000000,0);
ball.graphics.drawRect(-fireW/2,0,fireW+margin,1);
ball.graphics.endFill();
addChild(home);
home.addChild(ball);
this.x = xPos;
this.y = yPos;
addEventListener(Event.ENTER_FRAME,loop);
displaceImage = new BitmapData(fireW+margin,fireH,false,0xFFFFFFFF);
var matrix2:Matrix = new Matrix();
matrix2.createGradientBox(fireW+margin,fireH,Math.PI/2,0,0);
var gradient_mc:Sprite = new Sprite;
gradient_mc.graphics.beginGradientFill(GradientType.LINEAR,[0x666666,0x666666], [0,1], [120,220], matrix2);
gradient_mc.graphics.drawRect(0,0,fireW+margin,fireH);//drawのターゲットなので生成位置にこだわる必要はない。
gradient_mc.graphics.endFill();
gradientImage = new BitmapData(fireW+margin,fireH,true,0x00FFFFFF);
gradientImage.draw(gradient_mc);//gradient_mcを消す必要は？
rdm = Math.floor(Math.random()*10);
private function loop(e:Event):void{
for(var i:int = 0; i < 2; ++i){
offsets[i].x += phaseRateX;
offsets[i].y += phaseRateY;
displaceImage.perlinNoise(30+rdm, 60+rdm, 2, seed, false, false, 7, true, offsets);
displaceImage.copyPixels(gradientImage,gradientImage.rect,new Point(),null, null, true);
var dMap:DisplacementMapFilter = new DisplacementMapFilter(displaceImage, new Point(), 1, 1, 20, 10, DisplacementMapFilterMode.CLAMP);
ball.filters = [dMap];
I you can clarify a little bit further I would appreciate it a lot because I wasted some good time on this. -
I bought my iPhone in December and it has worked well until today (3/15/15). Now, I cannot send or receive e-mail, access Yahoo Weather, or go online through Safari. I suspect that it is a Verizon problem. Any help?
Did you reboot the phone by holding the home and sleep/wake buttons together at same time for 10 seconds?
-
Hi, I purchased Acrobat Standard XI, but can only find the CD for windows. I have a mac (I have access to an external CD drive and I have the product keys for windows). I have never installed it anywhere else. What is the best way for me to install it?
Hi lintonm86921521,
I can understand your concern & will guide you through this.
I am so sorry to inform you that Acrobat XI Standard is not available on Mac, you can only use it on your Windows computer.
You can also refer to the system requirements at : System requirements | Acrobat family of products—older versions (XI, X, 9)
In case if you have any further query please let us know, we will be happy to help you.
Regards,
Aadesh -
Occasionally ill try downloading an App through my Macbook Pro 13.5 & it directs me to iTunes to be downloaded. So, I go to iTunes and download the App I need. For instance, Amazon. I go into 'My Apps' in iTunes and try clicking on one of my DL Apps, but nothing happens. Why can't I access the Apps, which I downloaded through iTunes.?I believe I'm doing something wrong and not that the issue is iTunes itself. I have OS X Yosemite 10.10.1. I am due for an upgrade from that software and also an upgrade for iTunes as well, but that shouldn't be the problem. I've tried everything on my end to troubleshoot. I don't really have the time during the day to call in and troubleshoot, so thats why I'm asking the community. Please help with this problem if anyone can. Thank You!
Once you download an iOS app, you cannot run that app from the computer. That can only be run from an iOS device. You cannot download Mac Apps from the iTunes App Store, those are downloaded from the Mac App Store. Two different places. If you want a Mac app that will run on your Mac, you need to download that from the Mac App Store. iTunes App Store only has iOS apps that work on iOS devices, iPhone, iPad, or iPod.
-
Hi Guys,
We have configured ESS role through launchpad. For viewing payslips we are using an external URL configured through launchpad.
But when we try to access the configured link in ESS role, it displays "The contents cannot be displayed in a frame" .
Should I need to change some parameters/settings in Launchpad so that I could overcome this issue.
Guidance required,
Regards,
Ajeeth Kumar SHi Shankar Reddy Chamala,
Thanks for the alternate solution.
But the solution you have provided also ended up with the same error
"The content cannot be displayed in a frame" error.
Some additional information so that you could help me out,
The following is the test report .
HTTP/1.1 200 OK
Server: TIN-AppServer
Strict-Transport-Security: max-age=15552000
Cache-Control: no-cache, no-store, must-revalidate
Pragma: no-cache
Expires: Thu, 01 Jan 1970 00:00:00 GMT
x-frame-options: DENY
Content-Type: text/html; charset=UTF-8
Content-Encoding: gzip
Content-Length: 2421
Date: Thu, 15 May 2014 14:23:14 GMT
Connection: keep-alive
Vary: Accept-Encoding
The tester has mentioned the yellow highlighted property may be a cause for this issue.
I googled that the highlighted property is set by the website owners for security reasons.
Shankar I have another doubt..
Is it feasible to create an HTML document to open the external link and link the HTML document to the iview and then configure the custom iview with launchpad.?
-->If yes can you please elaborate the steps for it.
Thanks and Regards,
Ajeeth Kumar S -
Lion can't find my external Time Machine Drive
Anyone having a problem with Lion identifying the external Time Machine drive? When I go to Time Machine set up all I get is "Set Up other Time Capsule". Connections seem OK and drive is on and worked fine previous to the upgrade.
Any ideas?Is the drive a USB or FireWire external HD, or a network drive (NAS)?
If it's a NAS, it needs an update. See #C16 in Time Machine - Troubleshooting.
If it's an external HD, try repairing it, per #A5 in that same link. -
What do I do when I suspect a virus? Is it safe to do a back up on my external time machine?
What do I do when I suspect a virus? Is it safe to do a backup on my external time machine?
It is not a virus.
Please explain exactly what makes you think you might have a virus.
Yes. It is safe to backup to an external Time Capsule using Time Machine as the software to do that on your Mac. -
I want to Schedule a process exceution at defined time intervals. Is there a Timer Event available in the BPEL Engine that can be configured through a admin console (or similiar interface) so that I can schedule this job?
I checked onAlarm and I guess it supports only one time execution.
If BPEL engine does not provide the external timer my other options are to used a job schedular?
Thanks,
AI have the same problem. The bpel spec says that processes instances can only be started with messages. I could not find an external Timer Event in the samples, for instance some java code that can be run in the app server sending such timer events to a bpel process.
Ruerd
http://www.numericalexample.com
Maybe you are looking for
-
Number of elements in an array
Hi, I have been trying looking for a simple function to get number of elements is an array. Have gone though older posts but could not find answer to it. The function should work for following examples: char* name = "nInstruments" float state[] = {1.
-
How do I change picture resolution from screen capture?
If I want to take the image on the screen in Encore CS5 and save it as a photoshop picture the resolution is 70 DPI. Is there any way to change this resolution? I would like sharper pictures if possible, 100 DPI to 200 DPI if this can be done. Enco
-
I just got back from the genius bar, where they told me that my mac was fine expect for the HDD. So, I bought a new one and freshly reinstalled yosemite. Still the crashes are here, this is what console tells me after every crash (after a few lines,
-
Documentation for Javascript Functions
Where do I find documentation for APEX provided javascript functions such as addRow();?
-
In my Calendar app - I am trying to fill in an event that happened 2 months ago. The calendar app does not post it to my current calendar for those previous months. What I am trying to do is use my calendar app as a journal and fill in information a