Access to application when external and internal address of EP are differen
I have a problem with access to application in portal. I deployed the application (ear) and it is available by address http://noss.inside.bcc.com.pl:54100/forum/index.jsp in our intranet. External address of portal is https://portal.bcc.com.pl. My application is unavailable outside the company, because in url iView there is an address of internal network. I've tried to use relative address /forum/index.jsp, but it doesn't work. Is there any kind of iView, which can solve my problem?
Hi Julia,
have a look at this Topic: <a href="https://forums.sdn.sap.com/thread.jspa?threadID=65920">How does portal connect a user to internal web site</a>. Basically it is the same problem. Unfortunately Jeremy had not described the solution in detail.
Regards
Gregor
Similar Messages
-
External and internal mikes are not automatically switching over either recording or on voice calls
My laptop model name is HP Pavilion dv4-1100ea which is shipped with Vista Home premium 32 bits and has got service pack 1.
Restored the laptop to factory setting since then I am having the following problems; I had the same problem when my laptop was brand new and whenever I reset the laptop to factory setting I get the following problems:
1. External and internal mikes are not automatically switching over either in middle of the recording using sound recorder or while the call in progress on voice calls (skype):
Using the sound recorder if I start recording the sound with external mike and in-between recording if I switchover from external mike to inbuilt mike and later on when I play back I can only hear the sound up till where I used the external mike during recording, after the switchover to inbuilt mike I cant hear any sound.
But if I start the recording with inbuilt mike and in between recording if I plug in the external mike and later on when I play back I can only hear the sound up till where I used the inbuilt mike during recording , after the switchover to external mike I cant hear any sound.
So in brief both my external and internal mikes are working fine, only problem is that if I start recording (using sound recorder) or voice call with one specific mike, I have to continue with it till the end. I can’t switchover to another mike in between the conversation (voice call) or recording, if I do so, I have to select the mike manually in chat software but while recording I cant even select manually because in laptop, it takes the mike whichever is in current use as default mike in recording tab(sound window). The green tick automatically (in recording device tab) switches over according to the use of mike. Though the green tick in the recording tab is switching over automatically according to use of mikes, its not picking up the sound after switch over during recording.
2. And also when I click on recording device tab in sound window and plug in external mike, though the green tick automatically switchovers from internal to external mike, while I speak both internal and external mikes volume meter respond to the sound inputs by rising and falling but if I take out external mike, green tick goes to internal mike and when I speak only internal mike volume meter respond to sound rising up and down not the external mike.
To resolve the issue I have tried following steps with no luck:
1.I have checked the mikes(internal and external) properties, the both mike shows to be enabled in general tab, in level tab the volume is set to 100 and in advanced tab , all options are selected.
2. In device manager I have got only one audio driver named as “IDT High definition Audio CODEC”. I have uninstalled the audio driver and reinstalled it using scan for hardware option
3. Uninstalled the audio driver in device manager and reinstalled the audio driver using recovery manager > advanced option> hardware driver re-installation.
3. I have updated the BIOS(Insyde F.65, 12/02/2010).
4. I tried to update the audio driver using below link but things went more worse so I did system restore (not factory setting though).
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67051-1&lc=en&dlc=en&cc=us&...Sounds like you need to upgrade to the iPhone 5s
The 5s has Touch ID
You can unlock your phone with your finger instead of typing in a key code
No swiping to unlock either, just touch the home button
You can enrol multiple fingers as well
Here is a video of it in action
http://www.apple.com/iphone-5s/videos/#video-touch
Or wait and see what iPhone 6 has to offer
That being said, as desiel vdub posted if the phone is up to your face, the proximity sensor should turn the screen off
And when you lower the phone turn it back on again
Not sure about the phone locking when your on a call doesn't sound right -
Im logged into my account but i cant access my applications when i click them im recommended a thirty day trial for the applications that i already pay for i bought the full suite in november for the 2014-2015 school year i NEED access to my applications
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
or
This is an open forum, not Adobe support... you need Adobe staff support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
What are policy firewall port should be permit between meetingplace web external and internal
I deploy MeetingPlace Web Conferencing with SMA.
1. What are policy firewall port should be permit between meetingplace web external and internal (web external on DMZ zone and web internal on internal zone)?
2. Synchronized Globally Unique Identifiers (GUIDs) between internal and external Web Servers used firewall port?Hi,
List of Firewall pots to be opened are mentioned in following document, you can refer your deployment type and open ports as mentioned.
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_System_Requirements_for_Audio-Only_Deployments
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_System_Requirements_for_WebEx-Scheduling_Deployments
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_System_Requirements_for_MeetingPlace-Scheduling_Deployments
Regards
Ronak patel -
Prob creating ABAP Proxy-Interface use external and interna msg definition
Hi,
I've created a service interface using external definition (message type for request and response), imported via WSDL file. However, while creating ABAP proxy in SPROXY, it gave the error message "Interface uses external and internal message definition". I searched through the forum, the questions were raised but no definite answer was found. Is it not possible to generate a proxy if there is any external definition used?
Details of the error message:
Message no. SPRX122
Diagnosis
In a message interface you can use messages from different sources:
Message types and fault message types edited in the Enterprise Services Repository
Messages imported into the Enterprise Services Repository (external definitions, RFC, IDoc)
In the current message interface, message types from different sources have been used. Since messages from these different sources must be handled differently during proxy generation, such a mixture of messages within a message interface is not possible.
System Response
The interface cannot be generated.
Procedure
Change the interface definition accordingly in the Enterprise Services Repository.
p/s: My external definition is actually derived from a ABAP FM web service. The reason why i used external definition is that i try to avoid the tedious steps of hard-coding all the data types for the request and response message types.
Any help would be highly appreciated.
- juliusHi Arvind,
For technical reasons, proxy generation and the respective editors in the Integration Builder do not support the entire language range of XML schema and WSDL. For an overview of which language elements are supported, see the Excel spreadsheet in the SAP Service Marketplace at service.sap.com/xi ® Media Library ® Documentation: SAP XI 3.0 (SP11) u2013 Supported XML Schema and WSDL (EN).
I couldnt find the above document in the service market place. Any hint to find it?
Thanks.
- julius -
Do somebody knows what´s the recommended heigh to install an access point 1242 with external antennas 1728 on a flat area?And for example, if i use aps 3602 the heigh to install is the same?? BEST REGARDS
To determine the required height of an antenna tower over a hypothetically flat, spherical Earth, it's necessary to calculate the effect of the Earth's curvature, and then add a distance equal to 60% of the radius of the First Fresnel Zone. The table below shows the result of these calculations. Values have been rounded up to the nearest foot.
Line of Sight Distance Between Antenna Towers
Height of Tower to Avoid Flat Earth Curvature
Tower Height Required Over Tallest Obstacle In Line-of-Sight to Provide
60% Fresnel Zone Clearance
2.4GHz 802.11b/g
5.8 GHz 802.11a
8 Miles
10 feet
33
25
10 Miles
15 feet
38
30
12 Miles
20 feet
43
35
14 Miles
25 feet
48
40
16 Miles
30 feet
53
45
18 Miles
40 feet
63
55
20 Miles
50 feet
73
65
22 Miles
60 feet
83
75
24 Miles
70 feet
93
85
26 Miles
80 feet
103
95
28 Miles
100 feet
123
115
32 Miles
125 feet
148
140
34 Miles
150 feet
173
165
40 Miles
200 feet
223
215
It can be seen in the table above that a wireless link between two points separated by 26 miles would require an antenna tower with a minimum height of 103 feet for an 802.11b/g radio and 95 feet for an 802.11a radio. In practice the heights would typically be 20 feet higher, or more. This is because the Earth is not smooth and flat and the tower height must be raised to compensate for buildings, trees, hills, or other obstacles. For example, in a suburban setting, with houses and small offices, it may be necessary to add 20 to 40 feet to the tower height to get over the homes, offices, and trees that would be in the line-of-sight between the two towers. -
Are there any events to script a component when dragged and dropped into the parsys area?
are there any events to script a component when dragged and dropped into the parsys area?
The cq:listeners node of a component's cq:EditConfig has a number of events that fire with relation to the edit mode drag'n'drop stuff. You would probably want to hook one or more of the insert ones (beforeinsert, beforechildinsert, afterinsert, afterchildinsert).
-
Configure a sharepoint 2013 site for external and internal access
I need to configure a local install of sharepoint 2013 so that users can access it internally and externally using windows/AD authentication. The internal and external addresses are different.
I have bound an external ip to the domain for external access.
I have created Alternate Access mapping, and bound the host header but I get a file not found message for external access.
Have I missed something here? why the error and how can it be fixed. Step by step process would be appreciated.Hi Luis,
According to your description, my understanding is that the error occurred when accessing the site externally.
The most common cause for this is that the IIS host header is configured incorrectly. The 404 will appear because we are hitting a different IIS web site and not the one we are intended to.
Here is a similar issue for you to take a look:
http://stackoverflow.com/questions/14953322/sharepoint-2013-404-not-found-while-accessing-site-collection-from-outside
More references:
http://technet.microsoft.com/en-us/library/cc261814(v=office.15).aspx
http://technet.microsoft.com/en-us/library/cc263208(v=office.15).aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
HP Photosmart C4795 when printing addresses and return addresses on envolps are not lined up.
The return address or mailing address when printed on the envelop are not ligned up correctly on the envelop in the correct location. The Return Address is printed in the middle top of the envelop instead on the left upper corner, the Mailing address is printed to far to the right of he envelop.
x3,
Follow these directions and check these settings to print envelopes from Microsoft Word.
Click Tools , click Letters and Mailings , and then click Envelopes and Labels .
Type the Delivery and Return address information.
Click Options .
On the Envelope Options tab, set the following options:
Envelope size : Set the envelope size to match the loaded envelopes.
US only : Select Delivery point barcode to make it easier for mail sorting machinery to correctly route the envelope.
Return address : Set the Return Address position .8 inch in the From left section for Size 10 envelopes only.
Envelope Options tab
Click OK .
Select the Printing Options tab, and verify that the following settings are selected:
Select the Feed Method option that shows the envelope on the far right side with the short edge first.
Select Face down .
Examine the selected feed method image and verify that the envelope flap is on the left side of the envelope. If it is on the right, select or deselect Clockwise rotation .
Printing Options tab
Click OK , and then click Print
Let us know if it helps, Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
Fortinet 100D - split switch ports into external and internal VLANs?
I'm building out a small colocation site of two hosts.Would like to minimize the number of boxes that I have to buy and manage, but also need to have a reasonable firewall setup. I will have one firewall box and in an ideal world would like to get away without buying one or more switches to put alongside it.My bandwidth provider is going to give me two physical drops that provide connectivity to two of their aggregation routers configured HSRP. If I was going to connect to this in a typical setup, I'd have an external switch with the two drops attached plus one to the external side of my firewall. I'd then connect the internal side of my firewall to my internal switch, and my hosts to that.Given the low port count vs the large number of ports on the Fortinet 100D, I'm wondering if I can split the ports on the box into two groups and be...
We are excited to share that the City of St. Cloud, Minnesota, has deployed our HC3 Virtualization Platform for its price, ease of use and operation, and reliability as part of an ERP rollout rather than purchasing an additional SAN to host the new solution. Nicknamed the Granite City after the quarries and stone-finishing businesses that gave it its early economic boost, St. Cloud is the 10th largest city in Minnesota with a population of more 66,000 people. The city’s mission is to provide high quality public services for its residents in a cost-effective, responsive, innovative and professional manner given the changing needs and resources available. In an effort to best fulfill that mission, St. Cloud’s IT staff decided it would try to pilot a project with Scale Computing rather than purchasing another X-IO SAN as part of a...
-
Weird "relay access denied" error when using "%" in email address
Hi, I've written a solution that allows emails to be processed and redirected through my mail server. First, we receive mail at user%[email protected]. Then, we do some checks to make sure its legit, alter its content and re-send it to [email protected]. I posted another topic in this forum getting some advice as to how to build it, but it's all built and working well... or so I thought...
I initially had trouble with using the % symbol as the delimiter because of a default postfix behavior (postfix by default treats the % as my custom application is, which of course can be dangerous). However, I added "allowpercenthack = no" to main.cf and that seemed to allow postfix to not attempt to process it itself and let my application do the work.
However, if I now send mail now to my server (from another server) destined to user%[email protected], I (and my log) gets:
<user%[email protected]>: Relay access denied (in reply to RCPT TO command)
However, if I send to an address WITHOUT the %, like something [email protected], the whole thing works correctly.
HOWEVER, if I send messages WITH and WITHOUT the % from the command line while ON the server, I don't get these errors.
My main.cf has the following restrictions(s):
<pre>smtpdrecipientrestrictions = rejectnon_fqdnrecipient, checkrecipientaccess hash:/etc/postfix/access,
permit_mynetworks, rejectunauthdestination, rejectnon_fqdnsender,
rejectnon_fqdnhostname, rejectinvalidhostname, checkheloaccess hash:/etc/postfix/helo_access,
rejectrblclient zen.spamhaus.org, rejectrblclient bl.spamcop.net, rejectrblclient relays.ordb.org,
permit</pre>
I'm assuming that permit_mynetworks is allowing this to work from my server's command line, and therefore I'm suspecting rejectunauthdestination is what's killing my ability to use the % symbol. As a test, I removed rejectunauthdestination temporarily and reload postix. The next mail received triggered this error in the log:
Mar 16 12:24:28 server postfix/smtpd[1368]: fatal: parameter "smtpdrecipientrestrictions": specify at least one working instance of: checkrelaydomains, rejectunauthdestination, reject, defer or deferifpermit
Of course. I needed one of those directives. I didn't want reject, defer or deferifpermit, and documentation on checkrelaydomains was not available at http://www.postfix.org/postconf.5.html. However, I tried checkrelaydomains, and it seemed to work as expected permitting my % emails and rejecting stuff it should, but of course the 'gotcha' was that postfix's log now reflected:
Mar 16 12:33:08 server postfix/smtpd[1579]: warning: support for restriction "checkrelaydomains" will be removed from Postfix; use "rejectunauthdestination" instead
Mar 16 12:33:08 server postfix/smtpd[1579]: warning: restriction `rejectnon_fqdnsender' after `checkrelaydomains' is ignored
So, can anyone recommend a way I can polish up my restrictions to allow these % addresses without opening myself up for anything dangerous?
Side question: I placed `rejectnon_fqdnsender' after rejectunauthdestination destination because I didn't want to bother checking the sender unless I confirmed the recipient was at my server. Does that comment that it doesn't work after checkrelaydomains, mean that it also doesn't get processed after rejectunauthdestination?
MacBook Mac OS X (10.4.8)However, I added "allowpercenthack = no" to main.cf
and that seemed to allow postfix to not attempt to
process it itself and let my application do the
work.
However, if I now send mail now to my server (from
another server) destined to
user%[email protected], I (and my
log) gets:
Hardly ever had a need for this, but if I remember correctly you will need to set:
allowuntrustedrouting = yes
in main.cf
(No need for allowpercenthack (I think))
or you could create a hash table before rejectunauthdestination to return OK based on your needed patterns.
I think the first method will work though.
Side question: I placed `rejectnon_fqdnsender'
after rejectunauthdestination destination because I
didn't want to bother checking the sender unless I
confirmed the recipient was at my server. Does that
comment that it doesn't work after
checkrelaydomains, mean that it also doesn't get
processed after
checkrelaydomains is deprecated
You can place rejectnon_fqdnsender anywhere you like or even omit it, but I don't see why you would have to. -
How to authenticate external and internal users on different AD
What is the recommended way to authenticate external users as well as internal employees in a customer facing application?
We have external users in an Active Directory in the DMZ and our employees in our internal DMZ. Unfortunately we don't have an identity management system in place and wondering if there is a way we could authenticate user against two active directories without creating a trust between them.
We are implementing EP7.0
Thanks in Advance.You can also use user partitioning. A feature of the UME which allows for having different user persistence options for different users. What you could do in this case have the external user stored in the local db or an LDAP for the external users and the internal users stored in an internal LDAP directory. For more details about <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/e0/b60b404b2b1e07e10000000a1550b0/frameset.htm">user partitioning</a>, please see the docs.
regards,
Patrick -
Error in Access VBA Application when upgrading from Acrobat 8.0 to 9.0
Hello.
The company that I work for recently upgraded from Adobe Acrobat 8.0 to 9.0 and I`m experiencing some problems with my Access 2003 VBA Application that extracts text from PDF-files and insert it into a table. I have tried adding references to Adobe 9.0 Type Library, but still no luck. Anyone having any ideas for a workaround? See attatched image for error-message. Any help will be greatly appreciated!
Regards,
SteffanPublic Function lesPDF()
'On Error Resume Next
Dim MyDB As Database, EplanSet As DAO.Recordset, ResultSet As DAO.Recordset, SideSet As DAO.Recordset, TekstSet As DAO.Recordset
Dim AcroApp As CAcroApp
Dim AcroAVDoc As CAcroAVDoc
Dim AcroPDDoc As CAcroPDDoc
Dim AcroHiliteList As CAcroHiliteList
Dim AcroTextSelect As CAcroPDTextSelect
Dim PageNumber, PageContent, i, j
Dim Ferdig As Boolean
Dim StartPos, Length As Double
Dim PartSyntax() As String
Dim DocType() As String
Dim Content, strFileName, Temp As String
Dim k, Lengde As Integer
Plant = Form_Autoexec.cmbPlant.Value
Set AcroApp = CreateObject("AcroExch.App")
Set AcroAVDoc = CreateObject("AcroExch.AVDoc")
Set MyDB = DBEngine.Workspaces(0).Databases(0)
EplanSet.MoveLast
EplanSet.MoveFirst
Do Until EplanSet.EOF
strFileName = EplanSet!path & EplanSet!File
If AcroAVDoc.Open(strFileName, vbNull) <> True Then
Exit Function
End If
Set AcroAVDoc = AcroApp.GetActiveDoc
Set AcroPDDoc = AcroAVDoc.GetPDDoc
Here is some of the code, where the program stops is marked in red. This worked perfectly with Adobe 8.0. Thaks for any help or suggestions! -
Specific Settings for external and internal display modes?
Does anyone know if there is a way do have different settings that adapt to whether I'm using my Macbook's internal display or am docked to my 23" external Cinema Display at home? It would be nice if the Dock would be small and on the side "internally" and large and at the bottom "externally." Also its a pain if I've expanded a window on my external, then disconnect and have to tidy up my windows again so they fit on my smaller internal dispaly
Hi
Check this document
Page 35 shows how to change icons
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/504e31fc-f46f-2910-98b4-dd94478c22f8
Regards
Krishna. -
E-Recruiting for external and internal candidates
Hello,
I am looking for documents/guides that can show me how to configure E-Recruiting frontend (for external candidates) to point to the integrated ECC (HR + E-Recruiting) backend, and to configure SAP Portal with ESS (for internal candidates) to point to the integrated ECC backend. I am also looking to configure Trex 7.0 for E-Recruiting. I am unable to find any documents regarding this scenario. Can anyone help me locate some material?Hi Vishal,
There is no standard field available but this requirement can be handled through an enhancement in the specific BSP page. In your requirement it will be personal details tab in candidate profile wizard and it would also necessiate to enhance infotype HRP5102 - candidate information with this field.
You can also refer the blog below contributed by Hemendra Singh Manral to understand how to go about doing this enhancement in the BSP.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/other-topics/e-recruitment%20adding%20additional%20custom%20fields%20to%20requisition%20maintenance.pdf
Hope this information helps.
Best Regards
G Raj
Maybe you are looking for
-
can I have two contact lists on one mac book pro? I need one to sync with my iphone, one to sync with my husband's iphone.
-
Mac osx trying to reinstall my cs4
using the discs I own but it keeps giving me error messages saying it cannot install the following programs: illustrator, Photoshop. I gave up on the discs and tried to download directly from Adobe site & same error keeps coming up. Anyone have any s
-
I recently purchased an IPad air for my wife for Christmas. We live in a remote area with no high speed internet. We use an AT&T 4G hotspot for our internet access. We subscribe to a 5gb per month plan. Prior to Christmnas my wife had an older IP
-
Seemingly trivial but can't see to do it
Hi, I always liked using the arrow keys for moving objects in situations where I need more precise control e.g. I use this technique in Photoshop all the time. Is there a trick to using arrow keys in PrE 9? For example, I'm trying to position my text
-
Performance tuning of Oracle 10 g
Dear Team , I am in need of tuning my Database against the performance . I have visited lots of Web pages in Net for Performance tuning . It shows some values for the Performance tuning , But I dont how to read the values Wheather my database is good