Access to Core by PSTN

Our enterprise have four 6500 (the core of network), my Cisco provider want 4 modem (one for 6500) to access then by PSTN, i think this practice is a big risk, but i don't find recomendation informations about this.
Anybody can help me?
Thanks

We use a 3rd part device for this. It provides AAA and we use pre-defined call back numbers (to prevent war dialing).
We use http://avocent.com/Products/Default.aspx?id=6846
You could also use a Cisco router with A/S module.
Hope that helps.

Similar Messages

Appraisal - tcode access to core and end users

Hi Experts,
Please let me know which transaction code access is to be given to Super Users, Core Users and End users from the list below.
And also, Please let me know if I have missed out any transaction codes related to Appraisals.
T codes for PMS Basic Setting
OOHAP_BASIC           Basic Appraisal Template Settings
OOHAP_CATEGORY           Appraisal Category Settings
OOHAP_CAT_GROUP     Category Group Settings
OOHAP_SETTINGS_PA    PA: Settings
OOHAP_VALUE_TYPE     Standard Value Lists
T codes for PMS Process
PHAP_ADMIN     Administrator - Appraisal Document
PHAP_CATALOG     Appraisal Template Catalog
PHAP_CHANGE     Change Appraisal Document
PHAP_CREATE     Create Appraisal
PHAP_PREPARE     Prepare Appraisal Documents
PHAP_SEARCH     Evaluate Appraisal Document
This is very urgent..Your immediate response is highly appreciated.
Thanks!

Hi,
End users are authorized with
PHAP_CHANGE Change Appraisal Document
PHAP_CREATE Create Appraisal
PHAP_PREPARE Prepare Appraisal Documents
the T.codes
where they can prepare appraisals, if mistakenly entered wrong appraiser or appraisee they can edit
For other activities administrators must have autorization
Regards
Ratan Puli

Where to install CCM, access or core switch?

What's the recommendation on where the CCM server should be, in access switch or core switch? Based on ipt readiness assessment seems servers should be on access switch. Thanks

If you have many wiring closets (access layer) that has phones plugged into them, its better to centrally colocate CCM and such to the core, or in a distribution block that is connected to the core.
HTh
Sankar.
PS: please remember to rate posts!

Spatial Query, Use Multiple Cores

Basic question, is SQL 2012 running on Windows 2008 R2 64 bit expected to use multiple cores to execute it's tasks?
I have a table of points, 480, that has 3 empty columns that are being updated from 3 separate tables of polygons via a spatial join based on an intersection (STIntersects) of the point and polygons. All of the data is in 4326 and all tables have spatial
indexes.
The server running this query has 32 logical cores, but only 1 core is used and it is maxed out. It takes 53 seconds to complete the update. I have over a million points that need this done. I want to assume that if SQL can access more cores it will complete
faster.
I've looked at the actual execution plan and there is a 99% cost on the spatial query.
update A
set CONGRESS_DISTRICT = B.DISTRICT, HOUSE_DISTRICT = C.DISTRICT, SENATE_DISTRICT = D.DISTRICT
from [LegislativeMapData2014].[dbo].[CNRM_INFORCE_EXTRACT093014_COMBINED_GEOCODED] A
inner join [LegislativeMapData2014].[dbo].[CONGRESS_2014] B
on A.FEATURE_SHAPE.STIntersects(B.FEATURE_SHAPE) = 1
inner join [LegislativeMapData2014].[dbo].[HOUSE_2014] C
on A.FEATURE_SHAPE.STIntersects(C.FEATURE_SHAPE) = 1
inner join [LegislativeMapData2014].[dbo].[SENATE_2014] D
on A.FEATURE_SHAPE.STIntersects(D.FEATURE_SHAPE) = 1
Is there anything I can do to improve the performance of the query? Do I need to hint the indexes? Or something else?
Thanks

Hi,
updating millions of records could lock your resource and other users may have trouble connecting or reading data.
In some cases, variable table is your friend, insert the data you needed to a variable table before issuing the update.
with that, you may need to have (nolock) on each table. eg.
[LegislativeMapData2014].[dbo].[CONGRESS_2014] (nolock)
Regards,
gioVhan
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Can Access DRM encryption be applied on the fly?

Hi,
... and thanks in advance for responding. I have the following questions:
Can Access DRM-Core and Access DRM-Pro encryption be applied to a video file "on the fly" for RTMP? (I'm not interested here in Access Protected Streaming)
How about for HDS?
How about for HLS?
By "on the fly", I mean at the time the request was made from the client and as a prelude to the response from the media server. This would allow us to avoid creating and storing an Access encrypted representation of the video in advance.
Thanks!

There are a couple ways to generate just the "DRM Headers" without having to encrypt the whole file.
1. If you're an Adobe Broadcast Licensee, with access to our Broadcast SDK (HDKb), there are APIs in there to just generate the DRM Metadata.
2. If you have a recent version of AMS, the f4fpackager tool that comes with the product has had a recent revision where you can update an existing F4M (manifest) file to include a new DRM Metadata, which is created on the fly. I'm not sure if this new f4fpackager tool has been released yet in the latest AMS, however.
Besides those routes, the only other way to create a DRM Metadata would be to package an entire video.
cheers,
/Eric.

Where to download •Oracle Access Manager WebGate 10.1.4.3

i am working on OAM/OID integration with EBS R12(Integrating Oracle E-Business Suite Release 12 with Oracle Access Manager 11gR1 (11.1.1.5) using Oracle E-Business Suite AccessGate [ID 1309013.1]), As per the document i am trying to download Oracle Access Manager WebGate 10.1.4.3 from this link
http://www.oracle.com/technetwork/middleware/ias/downloads/101401-099957.html
i am confused on downloading (Oracle Access Manager Core Components (10.1.4.3.0 or Oracle Access Manager WebGates for OHS 11g and Weblogic Identity Assertion Provider (10.1.4.3.0) or Policy Manager and WebPass on Third Party and non-OHS 11g Web Servers (10.1.4.3.0 )
which one i need to download.

Hi,
Oracle Access Manager 10.1.4.3.0 is a part of 11g R1 release So, you should be fine with OAM 10.1.4.3.0.
OAM 10G R3 consists of OAM 10.1.4.0.1 (and 10.1.4.2.0).
-- Pramod Aravind

Dial-peer COR

Im running CME 4.X
DO you have an example where you have 2 types of users Employees and Managers
Employees can call Employees but not Managers.
Managers can call Managers and Employees.

thinking out loud here,
create two class of restriction for Managers+ employee assign members to that COR, possibly calls to PSTN etc and Employees
for managers add employee as a member enabling managers to call managers and employees
for employees, COR members will be pstn,internal etc but not managers
On manager phone incoming will be COR for pstn
On manager phone outgoing will be COR for pstn and employees
On employee incoming will be COR for pstn
on employee outgoing will be COR for pstn
im thinking numbering pattern will also be key and you may need to identify managers with diff values from employees.
ill check in detail and see if i can get some documentation

Access Canon MX860 from multiple accounts on iMac over WiFi

I bought a Canon PIXMA MX860 yesterday and set it up using my account on our iMac running 10.5.6. The printer is connected over WiFi. I can print and scan from my account.
When I try to print from another account on the iMac (my wife as an account and we have a guest account) the printer queue says "Printer is currently off-line". I sent a message to Canon, they told me to set permissions for "Everyone" to Read & Write on the Library folder. I tried this for:
/Macintosh HD/Library/Printers/Canon
and all enclosed items. Still doesn't work.
Has anyone else set up the MX860 to print from multiple accounts on a computer? Did you have to do anything beyond the procedure specified by Canon?
Thanks!
Matt

Hello Matt,
I don't understand why Canon support would have got you to change permissions on the Canon folder. This is not normally required.
I have the MP980 connected via wireless, and I can print to it from my Admin account and a standard account I made up just to check. What account type do you have set for the missus?
I also would have thought that the printer off-line message would have had more to do with her account not being able to access the network connection, rather than not being able to access the core Printers folder.
If using her account, you open the Print Queue and select the Utility icon, and then set the Canon IJ Printer Utility to network, does the MX860 display? And if you select it, can you peform any of the Maintenance functions?
Also, if you connect the MX860 directly to the Mac via USB, are you able to print to it using her account?
Pahu

2 locations, 2 core switch stacks, fibre in between, equal cost load balancing between?

Hi,
We've recently inherited a job that another company was doing, so we've had our hand slightly forced on the kit and overall topology involved, however that's all fine and we can make it work.
This is a collapsed core topology with core and access switches, split over 3 blocks (fibre connections between), one core switch/stack is in block B and the other in block C, with access switches throughout.
They require all access switches to be connected to the Core in B and the Core in C, and then obviously cross connects between the two cores.
They state:
"Core switches shall be linked with 2x 1Gbps links bonded into a standard compliant Etherchannel"
"Uplinks between access and core switches shall be non-blocking - for example equal cost load balancing at layer 3, or layer 2 bonded multi-chassis Etherchannel"
The specced kit for the core are 3850's, in an ideal world I'd use VSS (Virtual Switch System) to achieve the above statements beyond repute; but this is only supported on 4500/6500 and Nexus platforms.
Do we think a cross stack etherchannel (LACP between both core switch stacks) would satisfy the above statements? Or the statements may just be badly worded...
I look forward to your thoughts and views on this! Thanks!

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
As the others have noted, the 3850s, to stack, are restricted to the length of the longest stack cables.
As you have noted, VSS physical units would allow the "logical" unit to be far apart.
For a "small" VSS core, the 4500-X might be an idea unit. (Other than cost, the 4500 would be a better choice for a core device.)
Something to watch for, or understand, when running VSS, Etherchannel doesn't load balance as it does on a single chassis or stack. VSS will avoid using the VSL cross link unless it must.
As many access switches, today, support basic L3 routing, you might also determine whether a L3 edge would be a suitable alternative choice. It would allow retention of the 3850s and can offer some advantages even over VSS. (Where VSS is very nice [as too the Nexus] supporting servers with Etherchannels.)

ITEM tab in the Approval Process overview IN srm 7.0 AND EP 7.1

Hi Friends,
I am working in SRM 7.0 with EP 7.1..
1 . I have to remove 'ITEM' tab in the approval process overview screen which is apprearing in Portal. approval process overview screen will be appeared when 'Display / Edit Agents' Button in the Header level of the Shopping cart screen.
2 . Remove Approval Process overview tab in the detail screen of the shopping cart.
Any idea
John.

Hi Masayuki,
Thank you for your quik reply.
can you please explain little bit more on this..
2. tab
Easy way is right click, User Setting -> Hide Tab. or User Setting -> More.. Remove display tab
I tried this option but this is each user setting , Can we make this centerlized?
or
Go to SE80 Webdynpro and change the visible property.
I know the webdynpro for this tab but to change this visible property do I need have access key( Core modification ) or any other way to do such as enhancement spot?
John.
Edited by: John peter on Jul 10, 2009 11:16 AM

ITEM tab in the Approval Process overview

Hi Friends,
    I am working in SRM 7.0 with EP 7.1..
    1 . I have to remove 'ITEM' tab in the approval process overview screen. approval process overview screen will be appeared when 'Display / Edit Agents' Button in the Header level of the Shopping cart screen.
   2 . Remove Approval Process overview tab in the detail screen of the shopping cart.
   Any idea
John.

Hi Masayuki,
   Thank you for your quik reply.
can you please explain little bit more on this..
2. tab
Easy way is right click, User Setting -> Hide Tab. or User Setting -> More.. Remove display tab
I tried this option but this is each user setting , Can we make this centerlized?
or
Go to SE80 Webdynpro and change the visible property.
I know the webdynpro for this tab but to change this visible property do I need have access key( Core modification ) or any other way to do such as enhancement spot?
John.
Edited by: John peter on Jul 10, 2009 11:16 AM

Windows 7 and Advanced Site Setup CS3

This really seems like a dumb question, but I have to ask. Usings DW CS3 under XP, when setting up a new site using the "advanced" tab, you could simply click the folder icon next to "local root folder" and click to either select or create a folder without typing the directory location.
In October I upgraded to Windows 7 on one of my computers, and the "click" feature didn't work. I sufficed with simply typing in the actual directory. I've not upgraded to Win 7 on my second computer, and am developing test sites using CF and WAMP, where it's critical the core files stay in the CF or WAMP root directories. Now that Win 7 does not let you share root directories easily (I won't make this a post about Windows networking!) I've figured out how to work on DW dynamic sites on a home network. But it's REALLY difficult now to designating a local root folder "remotely" --- that is, accessing the core site files on computer A from computer B on the network if I have to type the location. It's so much easier if you just click it from the folder icon the way it used to work under XP. Ummmmm, is it a compatibility issue with DWCS3 and Win 7, or is it a Win 7 setting I need to change? To repeat, I noticed this now on both win 7 machines.
Thanks,
W!

http://forums.adobe.com/thread/478327

JInitiator 1.3.1.29 causes Internet Explorer 6 to Crash

Greetings to Everyone,
We have an extreme issue that we need help with. We have just upgraded to 11.5.10.2 and in this process we have installed JInitiator 1.3.1.29. What is occurring is that when a user logs into oracle and access the core forms. Once then click on a form the browser closes.
We have research ML and opened an SR but to no avail. can anyone figure out what is happening.
Steps we have done so far:
reinstalled jinitiator 1.3.1.29 no effect
used alternate plugin-SUN JRE 6 no effect
we do not have any toolbars from yahoo-google or msn or any other sources.
secondly, when we go to control panel and see the java initiator icon and try do right click open. We can not open the properties.
If anyone has experience this problem and give some help. Would be greatly appreciated.
Thanks in advance.
Edited by: KDF on Dec 11, 2008 9:32 AM

I would prefer doing this test.. This should give you a clear picture, if there's any patches/executables missing..
Note:162836.1 Applications DBA JInitiator Setup Test
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=162836.1

QoS on Catalyst 6500

We have the following QoS config running on Edge, Distributions and Cores and got the following error.
âpriority command is not supported in output direction for this interface
Configuration failed on: Port-channelâ
We had opened a TAC case and they said â PFC QoS does not support these policy map class commands:
bandwidth
priority
queue-limit
random-detect
set qos-group
service-policy
How can we prioritize voip traffic. On our monitoring application, it says queues empty. Even if the priority command is not working there should be traffic in the queue.Different version of supervisors in Distribution (sup720) and COREs (Sup2).
Any suggestions? Attached document gives Config details.

Are your Access Layer switches also 6500s? What Supervisor(s) are running in your 6500s & what CatOS or CatIOS are you running?
It sounds like you are redefining your trust boundary at every layer (Access, Distribution, Core). Did you get a chance to look over this SRND document?
http://www.cisco.com/application/pdf/en/us/guest/netsol/ns432/c649/ccmigration_09186a008049b062.pdf
Here's an example of our L2 6513 with a WS-X6724 which has 1p3q8t for QoS Scheduling:
interface GigabitEthernet1/2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address
logging event link-status
logging event bundle-status
logging event trunk-status
wrr-queue bandwidth 5 25 70
wrr-queue queue-limit 5 25 40
wrr-queue random-detect min-threshold 1 80 100 100 100 100 100 100 100
wrr-queue random-detect min-threshold 2 80 100 100 100 100 100 100 100
wrr-queue random-detect min-threshold 3 50 60 70 80 90 100 100 100
wrr-queue random-detect max-threshold 1 100 100 100 100 100 100 100 100
wrr-queue random-detect max-threshold 2 100 100 100 100 100 100 100 100
wrr-queue random-detect max-threshold 3 60 70 80 90 100 100 100 100
wrr-queue cos-map 1 1 1
wrr-queue cos-map 2 1 0
wrr-queue cos-map 3 1 4
wrr-queue cos-map 3 2 2
wrr-queue cos-map 3 3 3
wrr-queue cos-map 3 4 6
wrr-queue cos-map 3 5 7
priority-queue cos-map 1 5
udld port
mls qos trust dscp
rmon collection stats 6001 owner monitor
channel-group 2 mode desirable non-silent
interface Port-channel2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address
mls qos trust dscp
We also use NetMRI and you're correct, because the Cat 6500 PFC performs classification, marking, mapping, and policing functions, but the queuing and dropping policies are administered by the line cards, there are no MIBs for NetMRI to poll.
HTH
Steve

Can the Flash Player do frame accurate seeking when using the HDS protocol?

Hi all,
... and thanks in advance for taking the time to respond. I've been playing with different media serving protocols, and I have a couple of questions.
1. Can the Flash Player do frame accurate seeking when media is served via the HDS protocol? (I know it works using RTMP)
2. If it does work, is it impacted in any way if I also use Access DRM-Core or Access DRM-Professional? (I want stronger DRM protection than simple Access Protected Streaming)
Thanks!

Hello Simona_83. Try downloading Google Chrome (it's free). Install Flash Player via Chrome, and use Chrome as your browser. This is the only thing that worked for me after over a month of trying everything under the sun to get Flash Player working again. You'll have to use Chrome as your browser in order to have Flash Player capability, but so what. It works. If it works for you as it works for me, you will have Youtube again; you just have to access Youtube via Chrome. Don't waste hours of your life trying to get Flash Player to work any other way. Believe me, I wasted hours upon hours off and on over the course of a month trying to get Flash Player installed and operating.

Access to Core by PSTN

Similar Messages

Maybe you are looking for