Access to Corporate directory doesn´t work in cucm 9.1
Hello,
we are trying to access Corporate directory from ip phones without LDAP integration. The IP Phone gives me that answer when I press directory button.
Error XML[4]: error analisis
My question is if LDAP integration is neccesary to access Corporate directory.
Thanks in advance
Are you using a locale different from the default (En-US)? Can you check if the phone locale that was installed on the CUCM is compatible with the phone firmware? Can you try a higher phone firmware and higher locale which is compatible with that phone firmware?
Similar Messages
-
I have wifi access but youtube still doesn't work. how do i fix it?
I have wifi access but youtube still doesn't work. how do i fix it? it keeps saying it cannot connect with youtube
What country are you in? Is YouTube legal there?
-
Hi,
I want to use the SQL query IF EXIST to update or insert data in a ms access table, but it doesn´t work
(fault number -2147217900)
I want to search for a value in a ms access table , if it exist i want to update it, if not i want to insert a new row.
Working with LabView 7.1, database con. toolset.
Who can HELP?
Thanks a lot
MarcoHello,
I think that If exist is not a standar SQL command (I know it exists I think in Oracle and SQL server), MS access doesn't support it, so I think the best way to do it is first make a Select and then either an Update or an insert, sorry...
Paulo -
RD Web access SSO - remote desktop doesn't work
Hi,
This is my first post in here, and I hope you gays can help me out.
I am currently experiencing some issues with RD Web SSO not working as I would like it to work. I have found countless articles and guides describing how to get it to work, but no guide have yet helped me.
The problem is that when I log in on the web access and open a published application everything works fine I wait 5 sec and the application pups up, but when I try to open "Remote Desktop" then I get a new log in box where I must enter my log in credentials
again (after entering my credentials everything work great.)
The problems I am currently facing is produced in a demo environment configured as follows:
1x DC server (DC01) also the lic server
2x RDS server (RDS01/02)
1x RDS Connection broker (RDCM01) I have created a farm named "farm01.mydomain.com"
1x RDS Web access server (RDWA01)
1x RDS Gateway (RDSGW01)
(All the Servers are installed with Windows server 2008 (R2) SP1, and have the latest update.)
I am publishing my demo environment on the internet, i have created a domain name for my gateway and my web access and they are both accessible from the web (rdwa.mydomain.com and rdsgw.mydomaim,com). I also have secured everything with an SSL wildcard certificate
( my external and intern domain names are the same so I am using one SSl certificate) that is trusted on the web.
when I log in on the web access server trough (IE9 or IE8 ) from another network(wan) and I open a published application (calculator), it pop ups in just a few seconds. But when I try to open my Remote desktop I get a login box where I must enter my
username and password one more time.. after that remote desktop opens and everything works great.
My laptop is a Windows 7 professional with RDP 7 and IE 9, and is not member of a domain (just a workstation), I have tested it from multiple workstations and networks(Also win 7 and RDP7) but even there I have the same problem.
Thinks that I have tried tell now:
I have created a kerberos account as mentioned on
MSDN
I have checked my group permissions as mentioned
here
And many more blogs and forums
I have tried multiple settings on RDCM, RDWA, RDSGW and RDS server
Right now I am out of ideas, and I hope you gays can help me out..
thanks in advance,
PouyanThnx for you advise,
Did you go into your RemoteApp Deployment settings and change the server name to the farm name "farm01.mydomain.com?"
Yes
Also in the Session Broker's RemoteApp and Desktop Connection Properties window change the Connection ID to the farm name as well.
actually I couldn't find out what to put on the connection ID so I had left it just default, but after changing it to the farm name it still doesn't work
Did you sign you apps with the cert used on your RDS servers?
yes, I am using a wildcard ssl certificate to sign all the servers/apps with.
there is
something that
strikes me, when I log on the web access and click on a published application (that is hosted from the same RDS servers) then I get a information box. when I click on the "details" button I see on the bottom "use the following credentials to connect" and my
domain and username are published there. But when I click on the "Remote desktop" icon and do the same I can't see this information!!
Also I don't think that its an SSL problem, because after log in again it works perfect without any warning. -
Create Directory Doesn't Work!!! (stupid computers, mumble grumble)
Ok, so maybe I'm an ass.... but this rather simple section of code to dynamically create a timestamped directory if it's not there, and not create it if it is, doesn't work. I can't understand why it doesn't, but it doesn't. Can someone please help me out, I've written a huge super complex imaging program and finished it this past sunday only to have the very last problem in the software be with this stupid save file routine!
Thanks so much for the help!
Jonathan
Attachments:
createnewdir.vi 18 KBJonathon,
When I run your VI on my Mac, I get a File not Found error from the File/Directory Info function. That error is fed into the New Directory function, which probably prevents it from running. I think the same thing will apply to other OSes, but I am not sure.
Try putting a probe on the error in line inside the case structure and see what you get.
Lynn -
I have a Mac Mini with 10.4.11 and had some difficulties, so I decided t archive and reinstall OS X from the disc (10.3). After an hour of installation, I restarted and it got to the password page, which I never regularly used. There were 2 sign ins and I couldn't get any passwords that I always use to sign in and there is nothing to click to say that I don't remember my password. All the screen does is shake it's head and then give me another try. Eventually, it does give me a hint about my usual password, but that doesn't work. What can I do to bypass and get into the system?
"Try Disk Utility
1. Insert the Tiger Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
Custom installs in Mac OS X 10.4
http://docs.info.apple.com/article.html?artnum=301229
Here's a complete list of all the custom installation options available with Optional Installs.mpkg:
* Applications
o Address Book 4.0
o iCal 2.0
o iChat 3.0
o iTunes 4.7.1
o Mail 2.0
o Oxford Dictionaries
o Safari 2.0
o X11 -
Assignment block 'Opportunity' in Corporate Account doesn't work
Hello experts,
When I create an Opportunity I have functions Prospect (corporate account) assigned to a Contact Person (private account).
The assignement block 'Opportunity' is not being populated for either the Prospect or the Contact Person. That means that if I am in the Prospect account page, there is nothing in the assignement block 'Opportunity' (component BP_BPBT, view ContactOpportunities). And the same thing happens for the Contact Person account page, nothing is in the 'Opportunity' assignment block.
I need to see all opportunities created for that Prospect. How does the view 'Opportunity' work in the accoutant page, if nothing is shown there??
Thanks a lot!
PS: a similar thing is happening for assigment block 'Leads'...I can see it populated in the Corporate Account page (prospect) but I cannot see it populated in the Private account page (contact person).Hello Tim.
I believe this is the standard functionality. You can see the Leads in the Corporate Account, but not for the Contact Person.
Please, see if that is true for you: go to the Corporate Account page, can you see the Leads in the assignment block? But for the Contact Person of this Corporate Account you won't be able to see it.
However, you can view the Leads in the RELATION page. See if that is true for you too: access the relation page between the corporate and the contact person (imagine that you have 1 corporate account with 5 different contact persons...you will only be able to see the leads in the relation page, because you see the leads that are linked between the account and the specific contact person).
I don't think there is a standard way to bring Leads into the Contact Person (private account). It is probably possible via enhancement.
If you find a way, please let me know it too!
As for Opportunities, the same thing happens: you can view the Opportunities in the Account page, but not the Contact Person. You can also view them in the relation page.
Please let me know if you've found a way.
Thanks,
Luis. -
My Macbook Pro running Snow Leopard, had hard drive failure so I had to borrow a friends similar machine to access my iPhoto library ( 523 GB) on a 1TB drive after editing the photos and after exporting one folder of images the program quit and then asked me to repair which I tried hung up at 99% and would not open the event thumbnails . I have tried everything even trying to transfer the particular event from that library to a new library using iphoto manager just so I can export my project and send but still no success as it is telling me that it is getting no info from the library, I changed permissions on the drive ..still no success . I restarted Iphoto and it took hours to show the images but all events thumnails said "0" and it shows all the event cover photos as a gray photo with a palm tree in it or something . I tried rebuilding again this morning and the new library says "0" photos and a library size of 7.3 mb
I got my own Macbook 17in back yesterday and downloaded Mountain Lion to my machine and Iphoto 9.3
I tried to open the library which is 523 GB of images that used to work fine before getting an error message saying it needed to be repaired. I tried opening it with Iphoto 9.3 via I photo manager which told be that there were inconsistencies in the library and it needed to be repaired I chose that option and it is now the following day still "rebuilding thumbnails" since last night . This is a huge problem I have missed project deadlines and my income is severely affected by this situation of not being able to access my work. What can I do to fix this, access my files and export my overdue project at this point ?Terence I find it surprising that you would say use Iphoto Manager after saying that I used it to rebuild using it took me to 99% of the way and just hung. I even spent my $20 and got the latest version 3.8.3 which was supposed to remedy these issues. See below my email to Fat Cat software the makers of Iphoto Manager:
"Email to Fat Cat Software : Re Iphoto problems:
My Macbook Pro running Snow Leopard, had hard drive failure so I had to borrow a friends similar machine to access my iPhoto library ( 523 GB) on a 1TB drive
after editing the photos and after exporting one folder of images the program quit and the asked me to repair which i tried …it hung up at 99% and would not open the event thumbnails .I have tried everything trying to transfer the particular event from the library to a new library using Iphoto Manager just so I can work on my project but still no success as IPLM is telling me that it is getting no info from the library, I changed permissions on the drive ..still no success .
I opened it using IPLM and it took hours to show the images but all events said "0" and it shows all the event cover photos as a gray photo with a palm tree in it or something . I tried rebuilding again this morning and the new library says "0" photos and a library size of 7.3 mb . There
really seems to be a serious problem with Iphoto 9.3 as it
asks you to rebuild or repair the library then IPLM stops at 99% leaving
the thumbnails
unviewable and just hangs up after that or wont open and there the problems start.
Please advise and give me some viable options on this issue."
Its days later and the support at Fat Cat software emailed me asking a question and are apparently just as floored as I am with this malfunction ..I hope they are working feverishly to address this as my conclusion and solution is as follows :
Using the older version of Iphoto Library Manager when my machine asked me to upgrade and rebuild instead of the first aid function in Iphoto 9.3 did not help but actually corrupted my library and downloading the latest version did not help remedy it either. What I should have done and am now doing is using the Iphoto first Aid function in Mountain Lion and Iphoto 9.3 using option command to rebuild the entire library. So far it is working with no hangups ...it is now rebuilding image version number 6715 and counting with 33000+ images to go ..if this solution really rebuilds then that is the ONLY way to go with this issue which has cost me a lot of time and money in missed deadlines , lost income and lost business . Iphoto and Iphoto Library manager are normally great in what their purposes are and in ease of use and function but whenawry with compatibility in version software issues arise things go terribly awry and the tedious painstaking fixes available that go for days on end just do not cut it. -
Weblogic Single Sign On on Active Directory doesn't work
Hello!
Please help me to work out what my mistake is.
I configured Weblogic for SSO on Active Directory using article, described on support.oracle.com.
My krb5.ini file is
[libdefaults]
default_realm = DOMAIN.RU
default_tkt_enctypes=des-cbc-crc
default_tgs_enctypes=des-cbc-crc
udp_preference_limit = 1
[realms]
DOMAIN.RU= {
kdc=192.168.1.1
admin_server = DC.DOMAIN.RU
default_domain = DOMAIN.RU
[domain_realm]
.DOMAIN.RU= DOMAIN.RU
DOMAIN.RU= DOMAIN.RU
When I try to launch check by running kinit command I get following error
C:\Users\testuser>kinit -k -t "C:\Oracle\Middleware\user_projects\domains\base_d
main\test.keytab" HTTP/[email protected] -J-Dsun.security.krb5
debug=true
KinitOptions cache name is C:\Users\testuser\krb5cc_testuserPrincipal is HTTP/[email protected]
Kinit using keytab
Kinit keytab file name: C:\Oracle\Middleware\user_projects\domains\base_domin\test.keytab
KeyTabInputStream, readName(): DOMAIN.RU
KeyTabInputStream, readName(): HTTP
KeyTabInputStream, readName(): test01.domain.ru
KeyTab: load() entry length: 66; type: 1Added key: 1version: 5
Ordering keys wrt default_tkt_enctypes list
Config name: C:\Windows\krb5.ini
default etypes for default_tkt_enctypes: 1.
0: EncryptionKey: keyType=1 kvno=5 keyValue (hex dump)=
0000: 79 02 0D 8A 19 29 67 E0
Kinit realm name is DOMAIN.RU
Creating KrbAsReq
KrbKdcReq local addresses for test01 are:test01/192.168.1.2
IPv4 address
test01/ga80:0:0:0:te2e:3de1:crew:a409%11
IPv6 address
default etypes for default_tkt_enctypes: 1.
KrbAsReq calling createMessage
KrbAsReq in createMessage
Kinit: sending as_req to realm DOMAIN.RUException: krb_error 0 Cannot get kdc for realm DOMAIN.RU No error
KrbException: Cannot get kdc for realm DOMAIN.RU
at sun.security.krb5.KrbKdcReq.send(KrbKdcReq.java:168)
at sun.security.krb5.KrbKdcReq.send(KrbKdcReq.java:147)
at sun.security.krb5.internal.tools.Kinit.sendASRequest(Kinit.java:298)
at sun.security.krb5.internal.tools.Kinit.<init>(Kinit.java:237)
at sun.security.krb5.internal.tools.Kinit.main(Kinit.java:107)
Thank you!Hi,
Refer this..
http://help.sap.com/saphelp_crm52sp01/helpdata/EN/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm
Regards
Nandha -
Tab Access derived from template doesn't work
Hi,
I have a template that has a tab to be accessible to a specific group.I derive all my pages from this template.
The problem is that the tab shows on all the pages that are derived from the template even when the user did not have access to that tab they still can see it.
For the page level I was able to have tab level access- but there seems to isssues when the same thing is done thru tempaltes.
Thanks
SachinAre you using a locale different from the default (En-US)? Can you check if the phone locale that was installed on the CUCM is compatible with the phone firmware? Can you try a higher phone firmware and higher locale which is compatible with that phone firmware?
-
Accessing DLL in Java doesn't work - really it DOESN'T !!!
Hi,
I've got big troubles accessing a DLL in Java - almost for one week !!!
I want to call some methods from the LDCNLIB.DLL (www.logosolinc.com -> Software)
First, I tried to access the file via JNI ->
Exception in thread "main" java.lang.UnsatisfiedLinkError: LdcnInit
at Test.LdcnInit(Native Method)
at Test.main(Test.java:11)
Of Course, the DLL is loaded, everything seems fine.
I tried to create header files, I tried SWIG, JNIWrapper, JACE, JAWIN, ... Nothing!!!
I just want to call this method: "int count = LdcnInit("COM1", 19200);"
Can anybody help me? Please (don't be angry with me), just tell me what to do, no links to tutorials or documentations - I ALREADY READ THEM ALL!!!
Thanks
TorstenHi,
I had no problem at all to access this lib with JNative.
Here is a sample code.
package org.xvolks.test.Ldcnlib;
import org.xvolks.jnative.JNative;
import org.xvolks.jnative.Type;
import org.xvolks.jnative.exceptions.NativeException;
public class Test {
public static void main(String[] args) throws NativeException, InterruptedException, IllegalAccessException {
// System.setProperty("jnative.loadNative", "E:\workspace\JNativeCpp\Win32_Release\libJNativeCpp.dll")
for(String s : JNative.getDLLFileExports("C:\\Documents and Settings\\Administrateur\\Bureau\\ldcnlib\\Ldcnlib.dll")) {
System.err.println(s);
System.load("C:\\Documents and Settings\\Administrateur\\Bureau\\ldcnlib\\Ldcnlib.dll");
JNative LdcnInit = new JNative("Ldcnlib.dll", "LdcnInit");
LdcnInit.setRetVal(Type.INT);
LdcnInit.setParameter(0, "COM1");
LdcnInit.setParameter(1, 19200);
LdcnInit.invoke();
System.err.println("LdcnInit returned "+LdcnInit.getRetValAsInt());
}The output was as expected :
AddArcSeg
AddLineSeg
AddPathPoints
ClearSegList
FixSioError
GetComPort
GetSioError
IOSynchOutput
InitPath
IoBitDirIn
IoBitDirOut
IoClrOutBit
IoGetADCVal
IoGetBitDir
IoGetOutputs
IoGetPWMVal
IoGetStat
IoGetTimerMode
IoGetTimerSVal
IoGetTimerVal
IoInBitSVal
IoInBitVal
IoOutBitVal
IoSetOutBit
IoSetOutputs
IoSetPWMVal
IoSetSynchOutput
IoSetTimerMode
IsBusy
LdcnChangeBaud
LdcnDefineStatus
LdcnFullInit
LdcnGetGroupAddr
LdcnGetModType
LdcnGetModVer
LdcnGetStat
LdcnGetStatItems
LdcnGroupLeader
LdcnHardReset
LdcnInit
LdcnNoOp
LdcnReadStatus
LdcnResetDevice
LdcnRestoreNetwork
LdcnSendCmd
LdcnSetGroupAddr
LdcnShutdown
LdcnSynchInput
MaxStepPeriod
MinStepPeriod
PathGetVelocity
PathTime
SegmentsInBuffer
ServoAddPathPoints
ServoClearBits
ServoEEPROMCtrl
ServoGetAD
ServoGetAD10
ServoGetAux
ServoGetCmdAcc
ServoGetCmdAdc
ServoGetCmdAdc10
ServoGetCmdPos
ServoGetCmdPwm
ServoGetCmdVel
ServoGetGain
ServoGetHome
ServoGetHomeCtrl
ServoGetInport1
ServoGetInport2
ServoGetInport3
ServoGetIoCtrl
ServoGetMoveCtrl
ServoGetNPoints
ServoGetOutport1
ServoGetOutport2
ServoGetOutport3
ServoGetOutport4
ServoGetPError
ServoGetPos
ServoGetSDMode
ServoGetServoInit
ServoGetStat
ServoGetStopCtrl
ServoGetVel
ServoInitPath
ServoLoadTraj
ServoLoadTraj10
ServoResetPos
ServoResetRelHome
ServoSetFastPath
ServoSetGain
ServoSetHoming
ServoSetOutputs
ServoStartMotion
ServoStartPathMode
ServoStopMotor
SetFeedrate
SetOrigin
SetPathParams
SetTangentTolerance
SimpleMsgBox
SioChangeBaud
SioClose
SioClrInbuf
SioGetChars
SioOpen
SioPutChars
SioTest
StepGetAD
StepGetCmdAcc
StepGetCmdPos
StepGetCmdST
StepGetCmdSpeed
StepGetCtrlMode
StepGetEmAcc
StepGetHoldCurrent
StepGetHome
StepGetHomeCtrl
StepGetIObyte
StepGetInbyte
StepGetMinSpeed
StepGetMvMode
StepGetOutputs
StepGetPos
StepGetRunCurrent
StepGetStat
StepGetStepPeriod
StepGetStepTime
StepGetStopCtrl
StepGetThermLimit
StepLoadTraj
StepLoadUnprofiledTraj
StepResetPos
StepSetHoming
StepSetOutputs
StepSetParam
StepStopMotor
StepTime2StepsPerSec
StepsPerSec2StepTime
StepsPerSec2mSecPerStep
___CPPdebugHook
mSecPerStep2StepsPerSec
LdcnInit returned 0--Marc (http://jnative.sf.net) -
For CS6 on Mac, I bought a Corporate License. Trying to install CS6, the serial number is not accepted. What should I do?
Thanks.Hi Arnaud,
I used:
DesignStandard_CS6_LS16.dmg to install the package.
You will find the message which is shown as an attachment.
The package I ordered is:
Adobe Desing Std CS6 6.0 MLP AOO
License D (65163298).
Is that helpful?
Thanks.
Christoph -
Help....can't access iTunes and iPod doesn't work when connected
Ant ideas? I get an error message when I try to open iTunes,,,,iTunes has encountered a problem and needs to close....I have reinstalledseveral times...and when I try to sync my iPod using other programs( rhapsody(, it makes a wierd whirring sound and locks up the program.....
Well no, sending an error report to Microsoft about an Apple program won't get you anywhere.
Why not tell us the error message?
edit - Was that it, just that dumb generic message? How about if you try a shift-start of itunes? Press _and hold_ the shift key while starting itunes, and choose to create a new itunes library - does that get you any further? -
Wrt54g access point - audio function doesn't work
Hello @all,
I configured to the Linksys wrt54g and my Internet and E-Mail entrance run fantastisch. Only unfortunately my audio entrance does not function any longer. That is, no more tones come out mean boxes. If I install the audio driver again, then the AP does not function any longer. What can I do?
Greeting
Patbump!
-
ODBC access to LMS DB doesn't work
I have an application that returns 'provider not found' when trying to connect to the 'CiscoWorks embedded database'.
The dbodbc10.dll files were copied over from the LMS server and registry entries made per the manual.
The system Dsn was set up and tested fine in Data Sources (ODBC)
Is there a utility somewhere in the LMS distribution that registers the provider so it can be found by apps?
Thank you
Mike WhiteleyDepending on OS and LMS versions you may be running into CSCto44917.
Maybe you are looking for
-
How does role inheritance work in GRC
Hi All, We are implementing GRC PC 10.0 where we have activated Role inheritance for organization in Maintain Authorization Customization Node in SPRO. What i understood is by activating the role inheritance for organizations, you can specify that au
-
Error Deploying a BC4J JSP Application on IAS
When I am trying to run a BC4J JSP Application on IAS I have the following message: Error Message: JBO-30003: The application pool, BC4JDemojsp_BC4JDemo_BC4JDemoModule, failed to checkout an application module instance. Error Message: JBO-25002: Defi
-
When downloading Adobe Applicantion manager- I get Error Code: A12E1?
When downloading Adobe Application Manager (Error Code: A12El) appears?
-
Plant Maintenance wether we can consider the power consumption of equipment
hi In plant maintenance the client want to know the power consumption of each m/c ie is equipment if it is possible then how what are steps and where i have to enter that data. pls guide us
-
After I upgraded my dell, laptop to the new firefox 4.0....I cannot close History side bar.