Access to DFS root via VPN not working - error 0x80070035 keeps popping up

Dear all,
when trying to access the DFS root via VPN from a Windows 7 non-domain member computer I always receive an error stating "Windows cannot access \\eggs.local\dfs", Error Code: 0x80070035, The Network Path was not found.
I searched the internet as well as these forums in order to get to grips with this error message but didn't find anything to solve my problem.
I made sure, that NetBIOS over TCP/IP is enabled, that I have access to the VPN adapter's DNS as well as WINS servers, that DNS name resolution is working properly, DNS split tunneling is enabled, Windows Firewall is disabled, and so forth. Still no luck.
Any ideas?
Thanks Alex
Alexander Ollischer Diplom-Wirtschaftsinformatiker (FH) Citrix & Microsoft Certified Engineer (CCEA, CCEE, MCSA, MCSE, MCDBA, MCTS) Afontis IT+Services GmbH Baierbrunner Straße 15 81379 München Deutschland Telefon (089) 74 34 55-0 Fax (089) 74 34 55-55
mailto:[email protected] http://www.afontis.de http://www.itganzeinfach.de Amtsgericht München, HRB 109 005 Geschäftsführer: Thomas Klimmer

Hi,
Though you mentioned DNS is working properly, please check if DNS forwarder is set as set correctly.
And incase it is caused by authentication, please try to force Kerberos to use TCP - by default it using UDP and on a slow VPN connection, UDP packets may be dropped.
How to force Kerberos to use TCP instead of UDP in Windows
http://support.microsoft.com/kb/244474
Also check NTFS and Sharing permission on top of the DFS Namespace. At least give users a Read permission.
If you have any feedback on our support, please send to [email protected]

Similar Messages

Windows 8 VPN not working - error 720

I am running the RTM version of windows 8 on my laptop and get an error code 720 when I try and connect to my VPN service. The VPN worked fine for a few weeks and then stopped working giving me the "Error 720 - A connection to the remote computer could
not be established." I've switched VPN servers and turned off firewalls which have not resolved the issue. I'm hoping that it is just a bug in the yet to be released OS because before I started receiving the error 720, internet connection sharing would not
work using the VPN either. Has anyone experienced the same issue and know the fix?

Dear all ,
I have been working to solve this issue like 2 month ago , and I was sure that this is somehow of a miss-configuration, Managed to solve my problem by checking what I have installed as software and such .
I Wasn't pretty sure what is the software or what was the software causing all the issues , but in my case it was Antamedia DHCP server which wasn't even compatible with Win 8 yet
now please this is only for professional IT users , those who cannot handle this kind of configuration don't do it , as it may damage your whole system , our work will be in the Registry editor ,
Run --> regedit --> locate the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-
08002BE10318}
now the trick is to backup this file by exporting it and saving it somewhere ,and after you have to browse the keys for the one installed by your software and causing all the issues .
any one not abling to locate the key just send me the export file or post it here as a reply and maybe I can help him fix it , I know how annoying this issue is and that's why I'm offering my help , and in case of non professional users I may
be able to help them remotely when ever I'm online just send me an email on [email protected]
Please remember to mark this as answer if it works thank you and hope it helps you all from all over the world
Moustafa Chouraiki
Infrastructure Engineer
Softflow , Lebanon , Microsoft Partners .
(ActiveDirectory , Win 7 ,Win 8 , TMG , Lync 2010, SEP ,Exchange Server 2010 )

IPhone4 HomeButton Not Working & Voice Cntrl Keeps Popping Up

Yesterday my home button stopped working & the Voice Control (not voice over) keeps popping up. This happened 3 other times this year. I've backed it up in iTunes, and every time I try to restore it, it just keeps telling me it see's a phone in recovery mode. This is the most frustrating thing in the world to deal with right now.
Does anyone have any advice before I just throw it against a wall? Seriously I would if I weren't expecting an important call.
In the meantime, I went to Settings/General/Accessibility and turned on the Assistive Touch so I now have a stupid little make believe home button floating around on my screen to atleast help me temporarily with the Home Button not working issue...
Help!

A little late here but if you're still facing the issue there are a couple of things you can try.
From what you've said about Voice Control popping up, it looks like yours is a completely hardware issue. So all those gimmicks about software recalibration might not work. You should check out http://www.igeeksblog.com/iphone-home-button-not-working/ where there are some fixes for an unresponsive home button.
Alternatively, you can try whacking the back of the phone (right behind the home button, with your knuckle) and check if that fixes the thing temporarily.
The best thing would be to get to the Apple Store and let the guys fix it. Even if it costs money... because that way, you get the issue sorted or at least know where you stand.

Ssh via vpn not working in Snow Leopard

On a MacBook Pro with Snow Leopard, I want to log into a remote server on my employer's lan via ssh over a vpn connection. The vpn works because I can access a local twiki on that lan with no problem, but I can't run ssh or even ping. This is not a DNS issue because it happens even with explicit numerical IPv4 addresses.
On an older G4 iBook with Tiger, ssh and ping both work. I can run the two laptops side by side with simultaneous VPN connections; and Tiger will succeed, but Snow Leopard fails. Turning off the firewall on the MacBook Pro makes no difference. Could someone please give me an idea of what is going on?
I can't get help from my employer's IT staff because we are a Windows operation and would just as soon switch me over to Windows 7. Thanks.
Clint

My problem seems to be due to an advanced option in the Snow Leopard VPN preference to "Send all traffic over VPN connection." The domain that I was trying to reach is actually not on my company LAN, but successful ssh'ing to it seems to require that the request to come from a LAN IP address. Without the traffic redirection option, Snow Leopard tries to invoke ssh through my home IP address, which will then time out without making a connection. I think that Tiger automatically redirects traffic to the VPN whenever it is active.
(Note that when setting a VPN preference, it does not go into effect until after leaving the Network preference pane.)

Syncing not working, authorization message keeps popping up, no matter what.

When I try to sync all my iPhone apps/music/etc.. from my Mac air on to my iphone 4 Itunes says the computer is not authorized. Tried all the tricks given (authorize, on/off, check account, trying to only updates apps, update software) and it will once again tell me it is not authorized. After 8 hours of frustration, please advise.

Hi,
Though you mentioned DNS is working properly, please check if DNS forwarder is set as set correctly.
And incase it is caused by authentication, please try to force Kerberos to use TCP - by default it using UDP and on a slow VPN connection, UDP packets may be dropped.
How to force Kerberos to use TCP instead of UDP in Windows
http://support.microsoft.com/kb/244474
Also check NTFS and Sharing permission on top of the DFS Namespace. At least give users a Read permission.
If you have any feedback on our support, please send to [email protected]

VPN not working after upgrading to Mavericks

After upgrading to OS X 10.9 Mavericks - VPN not working. I am able to connect to VPN server fron inside local network, but can't do the same from outside through the router (1. I have statis external IP 2. NAT port forwarding is OK 3. Other services on my server work fine through router & NAT using external IP).
Tried:
1. Downgrading JAVA from 7.0: https://discussions.apple.com/message/23673943#23673943 - doesn't help
2. kern.ipc.maxsockbuf is big enough: https://discussions.apple.com/message/23525980#23525980
Also, IMHO, Apple periodically delete messages from forum about this problem, does anyone else has teh same feeling?
Any thoughts?

After upgrading to OS X 10.9 Mavericks - VPN not working. I am able to connect to VPN server fron inside local network, but can't do the same from outside through the router (1. I have statis external IP 2. NAT port forwarding is OK 3. Other services on my server work fine through router & NAT using external IP).
Tried:
1. Downgrading JAVA from 7.0: https://discussions.apple.com/message/23673943#23673943 - doesn't help
2. kern.ipc.maxsockbuf is big enough: https://discussions.apple.com/message/23525980#23525980
Also, IMHO, Apple periodically delete messages from forum about this problem, does anyone else has teh same feeling?
Any thoughts?

My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it

My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it

If you do not find a solution in the iPod nano (6th generation) - User Guide, suggest that you call AppleCare if still under warranty or take a trip to your local Apple Store or AASP.

In the absolutely new 5S the gyroscope does not work, error are stable three degrees, calibration is hindered

in the absolutely new 5S the gyroscope does not work, error are stable three degrees, calibration is hindered

Also, I probably should have added that I am with Vodafone, and I'm currently using the Blackberry Curve 3G (9300) on the version 5 software. I also have no access to the Internet, which is telling me I have no signal. I have full 3G signal, so there is no issue whatsoever with my signal. I don't use the BBM on the phone, so I'm not sure if the issue is affecting that also, but I assume it would.

App store on itunes not working error iTune cannot connect to itune store unknown error the network conection is refused on windows 8

app store on itunes not working error iTune cannot connect to itune store unknown error the network conection is refused on windows 8

Microsoft Windows 8 Business Edition (Build 9200)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 11.1.5.5
QuickTime not available
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0150B8980AD913B8
Current user is not an administrator.
The current local date and time is 2014-03-18 04:37:01.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.5.5 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {240FD97D-8118-4928-BF4E-8A531F89D837}
Description:    Microsoft Wi-Fi Direct Virtual Adapter
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Wed Dec 31 16:00:00 1969
Lease Expires:    Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name:    {BCD0EF3F-C4A4-402C-969A-C46C079E56A6}
Description:    Bluetooth Device (Personal Area Network)
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Wed Dec 31 16:00:00 1969
Lease Expires:    Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name:    {DD5C0797-BC23-4732-85FE-AC59C926EE98}
Description:    Realtek PCIe GBE Family Controller
IP Address:    10.144.120.70
Subnet Mask:    255.255.255.0
Default Gateway:    10.144.120.1
DHCP Enabled:    Yes
DHCP Server:    10.144.120.3
Lease Obtained:    Tue Mar 18 03:26:26 2014
Lease Expires:    Mon Jun 16 03:26:26 2014
DNS Servers:    10.144.5.30
        10.144.130.5
Adapter Name:    {E7CA4853-FF4A-49AE-AA4E-06BB1DEE67D4}
Description:    Ralink RT5390 802.11b/g/n WiFi Adapter
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Wed Dec 31 16:00:00 1969
Lease Expires:    Wed Dec 31 16:00:00 1969
DNS Servers:
Active Connection:    LAN Connection
Connected:    Yes
Online:        Yes
Using Modem:    No
Using LAN:    Yes
Using Proxy:    No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection was refused.
Connection attempt to Gracenote server was successful.
The network connection was refused.
iTunes has never successfully accessed the iTunes Store.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
F: hp DVD-RAM UJ8B1, Rev H.02
Drive is empty.

Printer will not work: error code 0xc19a0022

Printer will not work: error code 0xc19a0022

Hello citizenED,
Welcome to the HP Forums.
I see that you are getting the error code " 0xc19a0022 " .
I do have a few steps that we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error ...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

My bridge is not working normally and keep given me this message : bridge encountered a problem and is unable to read the cache . Please try purging the central cache in cache preferences to correct the situation

My bridge is not working normally and keep given me this message : bridge encountered a problem and is unable to read the cache . Please try purging the central cache in cache preferences to correct the situation

And did you then actually purge the cache?
Please realize that you have given ZERO details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Youtube app not working "error tap to retry" on ipad 4. Tried holding home button and off together and delete and download agin both didn't work

Youtube app not working "error tap to retry" on ipad 4. Tried holding home button and off together and delete and download agin both didn't work

Oh phooey. I had the same problem, so I decided to delete and reinstall. Only to discover that Google's YouTube app no longer supports anything below iOS 6. This is a problem since I'm running an original iPad.
Yes, I realize that my version of iOS still has the old YouTube app. But it's not the same. For one thing there are a lot of ad-supported videos that will only play in the new app.

HT4623 my i phone will not work error 3194

My Ipnone will not work error 3194

Well, right now, Apple is getting loads of people who are trying to download the new update. My iPod is doing the same thing, so, just wait an hour or two and then try again. It may take a while to veryify the update, and even longer to actually download it. Some people at my school updated their OS in study hall, while others were having the same problem you were. It should be fixed soon, just relax...

HT201407 Hi my whatsapp is not working! I keep getting message" could not activate"

Hi my whatsapp is not working! I keep getting message" could not activate"

Thank you! I forgot that all I have to do is reset iPad n it will ix most problems. Someone posted that message and it worked for me! :D

I used to be able to send text messages to my email. It's now not working. It keeps coming in as a text. Is one of my settings off?

I used to be able to send text messages to my email. It's now not working. It keeps coming in as a text. Is one of my settings off? Please help?

Verizon is not doing that it is the mail that is doing that.
Check your device settings for email and read the owners manual as to how to set up mail to download. How you want it, leave on server, etc.
Good Luck

Access to DFS root via VPN not working - error 0x80070035 keeps popping up

Similar Messages

Maybe you are looking for