Access to external drives connected to Airport Extreme via USB Hub

I have 2 computers connected wirelessly to an Airport Extreme 802.11n base station. I have a Belkin powered USB hub connected to the USB port on the Extreme. There is a Lacie hard drive, a USB printer and a Kingston flash drive connected to the USB hub.
The printer was connected using Bonjour and is working fine. The other devices connected to the USB hub aren't getting picked up. They did work at one point, but are no longer viewable from the computers (MAC Book and Windows XP). How can I re-configure the Extreme or my computers so that they'll work again?

DLNA = Digital Living Network Alliance. DLNA works in a Server-Client fashion with the Server providing the means to stream audio/video files to the client. DLNA servers are also called media servers. The AirPort Extreme Base Station (AEBS), with an attached USB HDD at best, can perform as a media storage device ... not as a server. You would still need a media server (either hardware or software) to perform this role.
For example, I use a software DLNA-compliant media server, called TwonkyServer. I run this server on one of my Mac minis. It gets its media files that are stored on a USB HDD attached to my 802.11n AirPort Extreme Base Station (AEBSn). TwonkyServer then streams these video files to my Xbox 360 which performs as a media client/player.

Similar Messages

Connecting to an external hard drive connected to airport extreme via usb

I have two computers running off my airport extreme base station. I have a desktop computer connected via an ethernet connection and i have a laptop that connects wirelessly. I have an external hard drive connected via the usb on my Airport. I installed my airport disk utility software on my desktop as it is the computer i store all my itunes material on and it syncs to my ATV. I am able to see my external hard drive as a networked drive on my desktop, and it works fine. However i am not able to see the networked drive on my laptop. I am running Norton 360 on both machines and both machines are running Windows Vista.
Do I have to install the Airport Disk Utility on both machines? I have read thru lots of threads about this and have not been able to solve this problem. I have gone into my firewall settings and allowed file sharing on my laptop. I cannot think of anything else to do. Any help would be greatly appreciated as this is the main reason I purchased my Airport Extreme.

I have exactly the same set-up, but I can see the portable drive with my MacBookPro but not with the PC connected by an ethernet cable to the Airport Extreme. How did you get the PC to see the portable drive on the Airport?

How do I access external hard drive connected to AirPort Extreme via iPad

Hello,
How do I access external hard drive connected to AirPort Extreme via iPad / windows laptop.
I donot have a Mac and I use windows laptop.

For your iPad, you will need an app, like FileBrowser, to access the external drive.
For your Windows laptop, you would access the drive like any other network share. The basic format is: \\<servername>\<sharename>, where, in this case, the servername is the base station name and the sharename is the name of the external drive.

Problem mapping USB external drive connected to Airport Extreme on my PC

I am having a problem mapping my USB external drive in my PC running WIndows Vista. Here is what I have so far:
USB External Drive connected to my AirPort Extreme which is connected to my Century Link modem/router.
I have installed the USB drive using the Airport Utility. In the Disks section the Enable File Sharing is checked, Secure Shared Disks is set to With a Disk Password, I have entered the password in the next 2 rows, and finally AirPort Disks Gues Access is set to Not Allowed. The section below named These Settings Configure Windows File Sharing is empty. Am I supposed to put something here?
I was also told I need to map the drive in my PC, but when I go to do that via the Computer and the Map Network Drive, I get stuck where it asks me to enter a folder name. I read many of the posts which tell me I need to enter among other things the disk's ip address, but I am unable to find it anywhere. Where do I find what to put here?
Can someone please help this frustrated user?

I had my USB drive on my APE working with Time Machine under 10.5.1 very reliably. A few days ago however, I needed to suspend a backup operation, and when I came back to restart it, time machine refused to mount the disk image on the drive. After several attempts to get it to connect with no luck I decided to delete the image (the sparce image file) and start over. Now TM refuses to create a new image.
BTW, on the Mac OSX hints site there have been suggestions to start a backup with the drive directly connected, then stop the backup, move the sparce image file to the root of the drive, reconnect the drive to the APE base station to get it working. I tried this again, but I think Apple has changed something in 10.5.2, because when directly connected TM no longer creates a sparce image file.
Anybody else seen this behavior after upgrading to 10.5.2?

How do I access my hard drive connected to airport extreme?

I've already imported video to my hard drive. I had it previously connected via firewire. It's there in an imovie 08. However, when I open up imovie in the "Event Library" panel, my hard drive has a yellow triangle with an exclamation point on it. Does anyone know how I can access this?
Do I have to choose "import" first and then copy the movie back into imovie? I think this would defeat the purpose of storing the footage on the external drive, right? I'm trying to make my first movie, so please be gentle if this is an easy question to answer. It's throwing me for a loop right now.
Thanks again!

sorry, the hard drive is connected via USB to my airport extreme. Here's how i can look at the files:
Macintosh HD, under "shared" i select my hard drive, open it and then click on imovie events, then i can access the 19 different folders which contain multiple clips in each folder, along with an imovie thumbs file etc.
However, in imovie when create a new project, then click on import, it will ask me where i want to save the files, and on the drop down arrow, the only choice is my macintosh HD and I can't choose anything else. I really don't want to save them to my computer's hard drive if i don't have to. It seems there should be an easier way to do this, but i'm overlooking something. I just want to be able to make a movie with the clips that are already saved on my hard drive which is connected via airport extreme. Thanks again!

External Drive connected to Airport Extreme, need Time Machine 3 Mac's Help

I own an Airport Extreme and just recently added two new Macs with the Time Machine feature to our household. I would like to use Time Machine to backup to my Airport Extreme that has a 500 GB hard drive connected. It seems Apple has this blocked since they have released the Time Capsule version of the router. Is there a work around this feature so I don't have to go out an purchase what I basically have already got? Please help. We would like to upgrade our older macs to Leopard and us the same system to back them up as well. Please advise. Thank you.

I had my USB drive on my APE working with Time Machine under 10.5.1 very reliably. A few days ago however, I needed to suspend a backup operation, and when I came back to restart it, time machine refused to mount the disk image on the drive. After several attempts to get it to connect with no luck I decided to delete the image (the sparce image file) and start over. Now TM refuses to create a new image.
BTW, on the Mac OSX hints site there have been suggestions to start a backup with the drive directly connected, then stop the backup, move the sparce image file to the root of the drive, reconnect the drive to the APE base station to get it working. I tried this again, but I think Apple has changed something in 10.5.2, because when directly connected TM no longer creates a sparce image file.
Anybody else seen this behavior after upgrading to 10.5.2?

Slow streaming from external drive connected to Airport Extreme

In the last week or so, when I try to play videos stored on my Airport Extreme on my Apple TV, they are extremely slow to load. It takes about 10 minutes before they even play, and at various points throughout it will have to essentially buffer for the same amount of time. The problem seems limited to the Apple TV, though, as I have no problem playing the same videos directly in iTunes.
Has anyone else experienced this lately?

Katie, I have had the same problem with both AIrport Extreme and a new TC.
Have you update the firmware to 7.4.1, if so downgrading back to 7.3.x fixes the problem for now.
I think there is something going on as a result of the 7.4.1 firmware upgrade.

Don't see files on USB Drive connected to Airport Extreme

I just connected an external drive to my Airport Extreme via USB. It appears as a shared device in the finder sidebar. When I select it, none of the files that reside on the drive appear. It is a 1TB drive with 600GB of files on it, but none of the files show up, only a folder with the drive name. I open the folder and it is empty. The folder window shows 300 GB available. How do I make the existing files visible?

Thanks for the info.
Were you using the drive for Time Machine backups, by chance? Time Machine backups are stored in a different format when the disk is connected directly to a computer. So, you won't be able to continue to use the old backups when the drive location is changed.
You might want to check the drive by connecting directly to your Mac and running Disk Utility to "Verify Disk" and "Repair Disk" if indicated.
Even if the drive has it's own power supply, a powered USB hub is usually needed on the AirPort Extreme because the power at the USB port is quite limited.
Message was edited by: Bob Timmons

Using Time Machine with 3rd party drive connected to Airport Extreme

In Snow Leopard, I connected a G-Tech drive to my Airport Extreme via USB and used that with Time Machine for backups. It worked flawlessly most of the time, although my understanding is that this technique has not been supported by Apple since Snow Leopard was released. Is anybody using this method in Lion? If so, does it work OK?
I got a little worried reading about the issues some folks have had doing Time Machine backups in Lion so instead of trying that method, I got another drive and connected it via FireWire to my MacBook Pro for backing up in Time Machine. The first backup took a little over an hour. The second one took just a few moments. I do notice that my hard drive stays mounted on my desk top even when Time Machine is inactive. Is this normal?

Lots of people do this, but it is not supported and there have been reports of data corruption even if things appeared to be working for quite some time. The question you have to ask yourself is whether it is worth the risk. This is a backup, after all. An unreliable backup is worse than no backup (because you think you have one when you may not).
What you have experienced with your external drive is all normal. The first backup takes quite a while because it is both large and there are lots of small files to copy. (Copying lots of small files is slower than copying a few large ones.) Subsequent backups will usually be much faster. One hour for the initial backup is actually very fast. Finally, external drives remain mounted even when Time Machine is not using them, unlike network drives which are only kept mounted while the backup is active.

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme.
Sorry, but no.
Time Machine will backup your Mac, but not the hard drive attached to the AirPort Extreme.
Time Machine will back up a hard drive only if it is attached directly to your Mac via USB or FireWire.

How to access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

How can I access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

...Called it a roaming network. Wireless mode is create a wireless network. I have checked allow this network to be extended. Probably need to uncheck that?
Yes, that option should be deselected as it only pertains to when both routers are interconnected by wireless. Since you have a roaming network, they of course, would be interconnected by Ethernet.
The other important settings for a roaming network are:
Each router must have a unique station name. For the AirPort, this would be called its Base Station Name. I believe the default station name for Linksys routers is: linksys
Each router must broadcast a wireless network with an identical Network Name. For the Linksys, Network Name is the same as its SSID.
Each router wireless network must use the same Wireless Security type and password. The Linksys WRT-54G is capable of up to WPA2 Personal. If you have it set to this level of security, the AirPort should be at the same setting.
Make sure that each router is not on the same Radio Channel for the 2.4 GHz radio. In the US, there are basically only three non-overlapping channels: 1, 6, or 11. Set each so that they don't use the same channel but use of those three choices.

How to access external drive attacked to AirPort Extreme from ipad

Have attached external drive to AirPort Extreme via USB, how can I access those files from iPad / iPhone?

Check to see if the File Browser App can do this:
App Store - FileBrowser - Access files on remote computers

HT204057 Time machine back up via USB hard drive connected to Airport Extreme.

Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme? It worked very well.

Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme?
Time Machine backups are supported via USB hard drive connected to the AirPort Extreme"ac" version.
Time Machine backups were not supported via USB hard drive connected to earlier versions of the AirPort Extreme.
Some users who tried this on earlier version AirPort Extremes seemed to have some success with Time Machine backups....some had moderate success and some had no success with this. Count me in the "no success" category.
See the topic about Time Machine support for USB disks in this Apple Support document:
http://support.apple.com/kb/HT5924?viewlocale=en_US&locale=en_US

Time Machine doesnt see my USB drive, connected to Airport extreme =(

Hello,
I've been trying to figure this one out for almost 3 weeks now, but with no luck. I have a usb hard drive, connected to airport extreme. I've clicked on "setup time machine", select "choose disk", there is no disk to select. So I click on the "set up time capsule, it takes me to airport utility. I then click on the "disk" button and file sharing is enabled.
I can mount the disk through the finder, just fine and able to transfer files back and forth, however time machine cant seem to pick up the drive. Would love to be able to use time machine to do backups, So can someone please help?
osx 10.5.5 with airport utility 5.3.2
Thanks in advance!

Well this has worked for me. I have a Freecom 500Gb usb hard Drive connected through an unpowered 4-way USBhub to an Airport Extreme Base station. After mounting the Air Disk hard drive on my powerbook, I then dragged the disk to my user folder, thereby creating an alias. I have put that alias in my login items and now TimeMachine works beautifully. I've repeated it on a Mac Mini (also using OSX 10.5.5) and that seems to be fine too. Admittedly the back-ups take a long time over airport, but fine via Ethernet.
Good luck everyone who struggles with this.
David

Can Time Machine back up a USB Drive connected to Airport Extreme?

If I connect 2 USB drives to an Airport Extreme via a USB hub, can I use Time Machine to back one up to the other? I've found multiple discussions about how to use an Airport Extreme disk as a Time Machine backup disk, but nothing on this. I want to use one disk as network storage (i.e. use the Airport extreme as a NAS), but I need a backup solution for that disk.

That's disappointing. I actually have a separate NAS already, configured for RAID1: a ZyXEL NSA220. Worked fine when I only had windows machines, but isn't reliable with my MACs, and doesn't support extended journaled format, so I need a different solution. I was hoping to just use a USB drive attached to my airport extreme to replace it, but I can't do that if I can't back up that USB drive.
Can anyone recommend a good backup solution? Surely this can't be that uncommon a scenario?

Access to external drives connected to Airport Extreme via USB Hub

Similar Messages

Maybe you are looking for