Access to Hard Drive connected to AEBS - Extremely Slow

I recently bought this Airport Extreme Base Station, model # MB763LL/A which brings me up disappointments one after another. First its my bad that I did not know AEBS does not support NTFS which forced me to format it to FAT 32 since I only has P/Cs that runs Windows 7. Its obvious that FAT 32 is not gonna allow me to transfer files larger than 4GB. Leaving this first problem aside, second one is the real headache for me. I connected my 2TB WD external HD to the AEBS and it is recognized by my Windows PC but every time I click that Drive or any sub folders in that, it takes awful lot of time. To be precise, it takes at least 2 mins to open a folder or a even for a right click. This is a terrible terrible problem. I can't wait 2 mins every time I click a folder. Do anyone know any fix for this problem or I will have to live with it.

It is possible that the Win7 "Windows Search" feature may be the cause of the delays in accessing the AirPort Disk (an external hard drive attached to the USB port of an AEBSn)
To disable Windows Search:
o Start > Control Panel > Programs > Programs & Features
o On the right-hand side, click "Turn Windows features on/off"
o Scroll down, and de-select "Windows Search".
o Press OK, close all windows and restart.

Similar Messages

  • How do I access external hard drive connected to AirPort Extreme via iPad

    Hello,
    How do I access external hard drive connected to AirPort Extreme via iPad / windows laptop.
    I donot have a Mac and I use windows laptop.

    For your iPad, you will need an app, like FileBrowser, to access the external drive.
    For your Windows laptop, you would access the drive like any other network share. The basic format is: \\<servername>\<sharename>, where, in this case, the servername is the base station name and the sharename is the name of the external drive.

  • How do I access my hard drive connected to airport extreme?

    I've already imported video to my hard drive. I had it previously connected via firewire. It's there in an imovie 08. However, when I open up imovie in the "Event Library" panel, my hard drive has a yellow triangle with an exclamation point on it. Does anyone know how I can access this?
    Do I have to choose "import" first and then copy the movie back into imovie? I think this would defeat the purpose of storing the footage on the external drive, right? I'm trying to make my first movie, so please be gentle if this is an easy question to answer. It's throwing me for a loop right now.
    Thanks again!

    sorry, the hard drive is connected via USB to my airport extreme. Here's how i can look at the files:
    Macintosh HD, under "shared" i select my hard drive, open it and then click on imovie events, then i can access the 19 different folders which contain multiple clips in each folder, along with an imovie thumbs file etc.
    However, in imovie when create a new project, then click on import, it will ask me where i want to save the files, and on the drop down arrow, the only choice is my macintosh HD and I can't choose anything else. I really don't want to save them to my computer's hard drive if i don't have to. It seems there should be an easier way to do this, but i'm overlooking something. I just want to be able to make a movie with the clips that are already saved on my hard drive which is connected via airport extreme. Thanks again!

  • Access external hard drive connected to Airport Extreme USB via Windows & Mac

    I have an Airport Extreme and I would like to connect an external hard drive to it via USB so that I can backup pictures, music, documents etc. I need to be able to see the external hard drive from my windows PC. I eventually will be buying a Mac so I would like to be able to also get to my pictures and documents via the MAC as well.
    I currenlty have an iPhone, iPad and Apple TV so getting to the external drive from these devices would be a huge bonus also if that is possible.
    I recently bought an ioSafe Solo External Hard Drive and I had to return it because it was only formatted for the PC. When I plugged it into my Airport Extreme, I could see the drive via the Airport Disk Utility but I could not see it from my PC and I could not map a drive to it. When I contacted ioSafe support, they said that what I was trying to do was not possible since I did not have a MAC available to me to reformat the drive.
    I hope that I am not trying to accomplish the impossible because I will always need to live in a MAC/PC world.
    Any help would be greatly appreciated. Thank you for your time!

    You must know people with Macs.. it is 2min work to plug a USB drive into a Mac Laptop and format it Mac OS extended with a quick format.. And that is better IMHO than buying a utility or buying a pre-formatted drive which are often more expensive for no very good or obvious reason.
    Another option is a Linux boot disk.. Linux distributions have very similar command line tools to the Mac OS. (some are identical) and HFS+ has been available for ages in Linux.

  • I can not access the hard drive connected to my airport extreme!  Any thoughts?

    I can not access the hard drive connected to my ariport extreme.  When I use the finder to connect a server and type in the IP of the a. extreme, 10.0.1.1 it does not work and I get an error message.
    Any thoughts.
    A

    Is the hard drive formatted for Mac in Mac OS Extended (Journaled)?
    If yes, you may need to use a powered USB hub since the USB port on the AirPort Extreme is under powered and it is often necessary to use a powered hub....even if the hard drive has its own power supply
    If both items check out above.....have you checked Finder Preferences to make sure that "Connected Servers" will be displayed?
    Finder Preferences > General > Show These Items on the Desktop > Connected Servers
    Then with the Finder menus displayed at the top of the screen click the Go menu
    Click Network and the AirPort Extreme icon should be displayed
    Double click the icon to mount the drive on the desktop

  • HT204057 Time machine back up via USB hard drive connected to Airport Extreme.

    Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme?  It worked very well.

    Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme?
    Time Machine backups are supported via USB hard drive connected to the AirPort Extreme"ac" version.
    Time Machine backups were not supported via USB hard drive connected to earlier versions of the AirPort Extreme.
    Some users who tried this on earlier version AirPort Extremes seemed to have some success with Time Machine backups....some had moderate success and some had no success with this. Count me in the "no success" category.
    See the topic about Time Machine support for USB disks in this Apple Support document:
    http://support.apple.com/kb/HT5924?viewlocale=en_US&locale=en_US

  • Can i access music on my hard drive connected to airport extreme with my iphone 5

    Can I access  photos and music on my usb hard drive connected to an airport extreme using an iPhone 5? I can access theme with mac and pc.
    Thanks, Kevex.

    Yes, but not out of the box. You have to download an app like FileBrowser.

  • Using Time Machine w/external hard drive connected to airport extreme

    I hooked up an external hard drive on my airport extreme. I see it in sharing, however, Time Machine doesn't recognize it as a back-up drive unless I have it directly connected to my MacBook Pro. How do I get Time Machine to recognize the external drive when it's connected to the airport?

    FWIW, the AEBS has known problems sharing a directly connected HD. Take a look over in the AEBS forums, and you'll see that this is a very common problem. Perhaps Apple will update the firmware and rectify this problem.
    Cheers,
    Andreas

  • Cannot find my hard drive connected to my extreme

    Hi - I am using a Windows 7 PC and cannot find the hard drive connected to my airport extreme.  I have gone into manaul set up on the extreme and asked it to share the files which it has confirmed, yet when I go into windows explorer I cannot see the drive at all ...... can I please ask for some assitance?

    Just want to be sure of three things first if you don't mind:
    Does the 802.11n AirPort Extreme Base Station (AEBSn) have a Base Station Name that includes a space? For example: My AirPort Extreme. If it does, rename it so that it does not have any spaces or use the underscore character between words.
    Does the shared HDD have a volume name that includes a space? If it does, again, remove them or add underscore characters.
    Is the HDD formatted in NTFS? If so, the AEBSn does the best job of sharing HDDs formatted in HFS+, then FAT32. It will NOT work properly with HDDs formatted in NTFS. If the HDD is very high capacity, you may want to borrow a friend's Mac to format it in HFS+ or get a utility that lets your PC format/read/write to HFS+ volumes. Regardless of it being formatted in HFS+, the AEBSn will share it out using both the AFP (for Macs) and SMB (for Windows/Linux) file sharing protocols ... so Windows PC should not have any difficulty accessing it.

  • Can a PC share a hard drive connected to Airport Extreme?

    I have a new Airport Extreme with a Seagate FreeAgent Desk for Mac 1.5 TB hard drive connected via USB. The Airport connects to the internet via a Linksys Vonage router, and two Macs are set up to use the Airport via wireless. The FreeAgent drive has 4 partitions: 1 for a TimeMachine backup from both Macs, 2 for SuperDuper backups of both Macs, and 1 for home video files and other backups. I also have a Dell PC running Windows XP SP2 hardwired to the same Linksys Vonage router.
    I'd like to use partition 4 on the FreeAgent drive to backup the PC. Is this possible, and if so, how do I get the PC to recognize the FreeAgent drive?
    Thanks very much for your help.

    dwhewlings, Welcome to the discussion area!
    Yes, you need to use Bonjour for Windows.

  • External hard drive connected to Airport Extreme not working on PC

    I have a Macbook Pro running 10.9.1 and my work laptop, which runs Windows 7. I have a WD 2TB external hard drive connected to my Airport Extreme, with 1TB formatted for Mac and the other 1TB formatted in FAT format. My Macbook can connect to the drive and read/write perfectly fine, but I'm not even seeing the drive on my PC anywhere. I'm wanting to use the Mac formatted partition to backup photos and personal documents and the FAT partition to backup my work.
    Is there a setup thing I need to do on either the Airport Extreme or on my PC to connect to have the drive visible? Both drives are setup to allow file sharing and my Airport Extreme is running version 7.6.4.
    Thanks!

    There are 3 different methods to establish a connection from your PC to the hard drive in this Apple support document:
    http://support.apple.com/kb/HT1331

  • Two hard drives connected to Airport Extreme. How to include one of them in TimeMachine Backup and use other disc as Time Machine backup disc?

    Hi,
    the title says it all. I've got an airport extreme and two hard drives connected to it. My idea was to use one as my additional storage (say DISC STORAGE) and the other one as my backup drive (say DISC BACKUP). I would like to backup my mac AND DISC STORAGE together to DISC BACKUP using time machine. My mac has 256 GB HDD, DISC STORAGE is 1 TB big, DISC BACKUP 2 TB. So there are no space issues.
    Problem: DISC STORAGE is not included in Time Machine's backup to DISC BACKUP. At the moment, only the mac is backed up to DISC BACKUP.
    Does anybody know if and how I can include DISC STORAGE in the backup process?
    By the way, DISC STORAGE is not listed in the "exclude from backup" list in Time Machine.
    Thanks!
    Arne

    Unforrtunately, Time Machine cannot backup from a network drive to another drive. Time Machine will only backup a Mac and a drive that is directly attached to the Mac, via USB or FireWire.
    You will need to use an application like Carbon Copy Cloner or SupoerDuper to be able to backup from DISC BACKUP to DISC STORAGE.

  • Connecting to an external hard drive connected to airport extreme via usb

    I have two computers running off my airport extreme base station. I have a desktop computer connected via an ethernet connection and i have a laptop that connects wirelessly. I have an external hard drive connected via the usb on my Airport. I installed my airport disk utility software on my desktop as it is the computer i store all my itunes material on and it syncs to my ATV. I am able to see my external hard drive as a networked drive on my desktop, and it works fine. However i am not able to see the networked drive on my laptop. I am running Norton 360 on both machines and both machines are running Windows Vista.
    Do I have to install the Airport Disk Utility on both machines? I have read thru lots of threads about this and have not been able to solve this problem. I have gone into my firewall settings and allowed file sharing on my laptop. I cannot think of anything else to do. Any help would be greatly appreciated as this is the main reason I purchased my Airport Extreme.

    I have exactly the same set-up, but I can see the portable drive with my MacBookPro but not with the PC connected by an ethernet cable to the Airport Extreme. How did you get the PC to see the portable drive on the Airport?

  • Unable to access USB hard drive connected to EA3500 router

    WD essential 2GB hard drive connects OK through cisco connect but when I click on the shortcut or try to access the drive I get access denied duer to permission to the ip address

    tried with firwall off and tried manually mapping but in both cases no luck. The drive appears in the GUI and I can create new folders on the drive. So it seems the rout recognizes the device but the PC does not want to recognize the drive. Seems something like the security or login access on the PC (XP). Tried creating new login id exactly the same on PC as the router with same password but the PC does not recognize the access.

  • XP sp3 cannot see usb hard drive connected to airport extreme 802.11n

    I have a sata drive that the airport utility recognizes. I attempted to follow the instructions from post HT1331 but no luck yet. I also reformatted the drive from ntfs to fat32 using vista but with the same result.
    I found another post while writing this one which solved my problem. It turns out how I formatted the drive wasn't usable by AEBS.
    Connecting Large USB Hard Drives to Airport Extreme
    I needed to format the drive using the instructions found below.
    http://www.ridgecrop.demon.co.uk/index.htm?fat32format.htm
    After doing this and plugging in the drive I was able to use the drive intended. Since I had started the post I figured I would list the solution.
    Cheers!

    I don't think two problem are related. Now, for PC, try to disable the firewall software if you ave one. Some firewall can block it, like for ex PC Tools firewall, or ZonaAlarm. Some of them you can configure to work with disk agent.

Maybe you are looking for

  • Sap.m.ActionSelect turn of no data text

    Hi Folks, I have a ActionSelect control in my Master.View.XML. I need an onClick or onPress event if a user clicks on a item. The ActionSelect only supports onChange (as far as I know). That's why I decided to use Buttons. The problem is, that the Ac

  • VRAM: 128 MB vs. VRAM: 256MB

    What is the advantage of increasing the VRAM from VRAM: 128 MB to VRAM: 256MB? I do not use my computer for games, but I would like to use the second monitor option someday. Will the increased VRAM be a big benefit for a second display? Thanks. iMac

  • VAT ultilization through S_ALR__87012357 Advance Tax Return

    Hi, In the Indian scenario, we are having input tax code having both ED deductible at 10.30% and VAT Deductible at 5%. The captured ED deductible amount get setoff through J2IUN. But when we try to do VAT utilization through Advance Tax Return Progra

  • Can't access weblogic server from internet but can from intranet

    Hopefully this isn't the wrong place to post but I've searched through many many newsgroups to figure out where to post this but can't find a specific enough one. I've recently run into a problem with my weblogic server in that it can not be accessed

  • Why should forum experts work for free?

    If you click the Help link in most Adobe programs you're directed to a website which contains the image shown below. It makes the people who answer questions on this forum look like paid Adobe employees. It's very nice that Adobe thinks so highly of