Access to NAS - Error -43; with tiger it worked but not with leopard

Hello,
I've got some problems with an NAS Storage device.
While my iMac was running under tiger i coud access without any problems.
After upgrade to Leopard i can not access the drive.
(Same problem with my macbook).
Using my old, ugly windows-pc i still can access.
I browsed across the forum but did not find a useful answer.
any hints?

Hiya,
first of all, an apple error "-43" would mean:
"File not found; Folder not found; Edition container not found; Target not found"
(this is from apple document http://support.apple.com/kb/HT1618)
In your case, I assume, the computer cannot find your NAS
Also, there was another discussion and it looks like, this might be a Leopard issue:
http://forums.mactalk.com.au/33/38868-leopard-nas.html
Hope this gives you a start (I entered "nas error apple" into the www.google.co.uk search engine).
Hope you can sort it.

Similar Messages

When I try to make smaller PDF's I get an ''unknown error''message,(Win7 on Acer laptop, but not on my HP Desktop with Win Xp (two separate Acrobats)?

When I try to make smaller PDF's I get an ''unknown error''message,(Win7 on Acer laptop, but not on my HP Desktop with Win Xp (two separate Acrobats
Happens isnce a week or four...

https://www.dropbox.com/s/h20hiaxiuynz6z5/Blendle%20week%2051%202014.pdf?dl=0
https://www.dropbox.com/s/eohk8an2rozwe5w/NatGeo2015.pdf?dl=0
Until a few weeks ago no problems with this kind of files

I receive the error "this apple id is valid but not an icloud account" when I try to open icloud on my pc. Help.

I receive the error "this apple id is valid but not an icloud account" when I try to open icloud on my pc. Help.

Music purchased from the iTunes Store is automatically available in iCloud. This is "iTunes in the Cloud" and does not require an iCloud account. The music is stored in the iTunes Store, not in a personal iCloud account.
If you don't have any Apple devices you will not be able to create an account. It wouldn't be any value to you anyway as it syncs data on you computer with your Apple devices. If you don't have any, there is nothing to sync.

Problem with drivers for HP B109 a-m all-in-one, have printer working but not scanner in windows 8

Still have a problem with the drivers in Windows 8 release preview, for my HP B109 a-m all-in-one, have printer working but not scanner, is there any chance of a fix before final release of Windows 8 ?.

Review my post here:
http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/SOLUTION-Get-Win-7-Printer-Drivers-HP-Solutio...
And see if something similar will work for you.

My iPad cannot connect to my internet. the internet is working but not with my ipad.

my iPad cannot connect to my internet. the internet is working but not with my ipad.

Call your ISP (Internet Service Provider) and explain them your issue, it could range from having your router configured incorrectly to having a wiring issue. Personally, I have Comcast and they are great, no issues, and awesome customer service.
Hope you get up and running ASAP

I was working with my Apple IPad 4G suddenly the sound stopped,I flipped the back of device slowly and it started to work but not properly and again stopped working.

I was working with my Apple IPad 4G suddenly the sound stopped,I flipped the back of device slowly and it started to work but not properly and again stopped working.
Now it is not working even with fliping, is the problem with hardware or software?
Is any soloution to solve the problem?

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Communication Error with Brother MFC-620CN Printer works but not scanner

Only printing works off the airport extreme but not scanning. Tried to mannually add the printer in the control center or device selector but printer cannot be found. Scanner worked prior to software upgrades. In addition, I get the communication error message "fails to connect to device" when I connect to the brother status monitor... All is OK when hooked up directly to Mac.
Anybody has a hint? Would be very helpful.
Thanks
Marti

Only printing works off the airport extreme but not scanning.That is exactly how it works. The AirPort Extreme base station (AEBS) only supports printing NOT scanning or any other operations.

I can access a function in a package using OCI drivers but not PDO drivers

Hello all, i am a newbie to Oracle and its drivers for PHP. I would like to use PDO, and I have my database activity in packages, which have procedures and functions. My package has overloaded functions and that has been giving me a tough time with these drivers. So one signature of my function get_data contains a four arguments and all four are numbers, while another signature of get_data has the first two as numbers and the next two as varchar2. So when I try to access this function which is part of a package, I am able to retrieve data, and the driver I am using is OCI8, but when I try to do the same with PDO, it does not work. It gives me this error,
*General error: 6553 OCIStmtExecute: ORA-06553: PLS-307: too many declarations of 'GET_DATA' match this call (/var/www/php-5.3.3/ext/pdo_oci/oci_statement.c:146)' in /var/www/pdo_check.php:251 Stack trace: #0 /var/www/pdo_check.php(251): PDOStatement->execute() #1 /var/www/pdo_check.php(345): dbPDO->execPackage2() #2 {main} thrown in /var/www/pdo_check.php on line 251 *
I got this error earlier with OCI drivers, then I added the datatype while binding the values.
Has anybody had this headache earlier??
##Works
*$qu = oci_parse($connect, 'select pack.get_data(:p1,:p2,:p3,:p4)as rc from dual');
$p1 = (int)121;
$p2 = (int)222;
$p3 = (int)324;
$p4 = (int)001;
oci_bind_by_name($qu,":p1",$p1,10,OCI_B_INT);
oci_bind_by_name($qu,":p2",$p2,10,OCI_B_INT);
oci_bind_by_name($qu,":p3",$p3,10,OCI_B_INT);
oci_bind_by_name($qu,":p4",$p4,10,OCI_B_INT);
oci_execute($qu) or die("did not execute");
$r = oci_fetch_array($qu);*
##Does not work
*$sql = 'select pack.get_data(:p1,:p2,:p3,:p4) from dual';
$result = $this->dbConnect->prepare($sql);
$p1 = (int)2;
$p2 = (int)2;
$p3 = (int)2;
$p4 = (int)6;
$result->bindParam(':p1', $p1, PDO::PARAM_INT);
$result->bindParam(':p2', $p2, PDO::PARAM_INT);
$result->bindParam(':p3', $p3, PDO::PARAM_INT);
$result->bindParam(':p4', $p4, PDO::PARAM_INT);
$result->execute();*
I am still perplexed why is PDO giving me an error, when I have virtually mentioned everything is asks for?

I think the only person who can really answer this question is Chris Jones. For my money I tend to steer clear of PDO as it is a bit quirky ( at least in my experience ) and it does not support reference cursors.

Ichat only connects for a few seconds on Tiger but not on Leopard??

I have two laptops, a MBP with 10.4.11 and MB running 10.5.2..
When I am speaking with someone on video ichat on tiger, the connection only lasts for a couple of seconds then freezes and shows error messages like "No Data sent in last ten seconds" and Insufficient bandwidth" although my internet connection is fine, I have 6mb download and 450kb upload with a Netgear wireless Modem CG81..
On my MB with leopard, I can speak anyone else fine and don't get any error messages?
My MBP with tiger has been set in system prefs for the quicktime streaming speed as 1.5mbs?
What else can I do? Why is this happening?

Hi,
I could not see anywhere that I would clearly suggest was the equivalent place in any of those pics.
It may not have it.
It may be the other end.
But it is common with Netgears so I would search all the menus.
Also keep an eye out for anything that says about blocking or allowing Internet Pings
If you have a Later device or have upgraded the Firmware it may well have UPnP.
On most Netgears that have this it is ON by default.
If it is left on it will clash with the Port Forwarding.
As to setting the ports. Some devices set Protocols for the ports (UDP or TCP and sometime Both/Any) whilst doing Port Forwarding. (not all do)
Check that the ports that are used twice (5190 and 5298) are set to allow UDP and TCP as that is most likely what you came across.
In the Second Link they have "Both" showing in "iChat6" and this matches "iChat1"
9:33 PM Sunday; March 30, 2008

Error while generating PDF in portal but not in WAD

Hi,
When I execute the command to export to pdf, I have a screen to fill settings of my pdf, then I valid my choice and I have this message : "Error while generating PDF" in my portal.
However, when I want to execute on Web Application Designer and click on my command "export to pdf", I have a same screen and I can open or save my document.
Is someone have an idea : why it is possible to generate my pdf on WAD but not in my portal ??
Any information is much appreciated !
Thanks in advance
V.K.

Hi Pradnya,
Thanks for your answer. However it is for an old version of SAP NetWeaver..
I work with SAP BI 7.0 version.
Regards,
V.K.

XMLDataSet works, but not when loaded with UpdateContent

I have page that contains a spry collaspile panel area and a
xmldataset.
The page when accessed directly from a url Loads fine
http://www.gillespiecrm.com/display/default/clientdetail.template.php?uid=1&client=427
However, if I take the above try to load it within another
page of an application with updateContent
Spry.Utils.updateContent('client' + sTabDivId + 'detail',
'display/default/clientdetail.template.php?uid=1&client=427');
The collasible tabs work, but the xmldataset does not.
can anyone explain why this is occuring?
Thanks
Z

Hi Zeus,
I have already answered this query in a different post. May
be you should go through it
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=602&threadid =1295717&enterthread=y
You need to replace Spry.Utils.setInnerHTML() method as
explained there.
-JV

OSA-Error message shows up in R3, but not in Portal(BSP)

Hello,
I'm working on Objective Setting & Appraisal with workflow & portal. At the template level I've put some business check which if not met at the document level throws up error msg. This works fine in R3 and the error msg is shown at the bottom of the screen at the status bar.
But this same error msg doesn't show up when I open the document in the portal through workflow. The appraisal document opens in the portal through BSPs. When the condition is not met, on saving or submitting the page remains there ... but no error msg. We tried to show the error msg as a pop up and the pop up works fine in R3 but not in portal.
Pls advice how to solve this problem.
JKT

Hi Sameer,
We have used the application hap_document under BSP Application. And we have not used any standard user exit. All we have done is created a new enhancement under HRHAP00_DOC_BC ;ie; Appraisal Document - Business Check.
I can see one document_error.htm Document - Error Handling. Do I have to do anything with this page ? if so, should it not call this page automatically whenever there is an rror msg ?
Pls suggest. Thanks

Error while registering time in ESS, but not in ERP

Hi all,
I'm having a strange problem : when a user tries to record time using ESS he receives the error 'project /task xxxxx000000 not permitted for work date xx.xx.xxxx
When we try the same booking in ERP (cat2) it passes without any problem.
I'm under the impression that the problem is caused by the zero's after the project/task number. I only see the project number, but not the task number (which is displayed by six zero's).
Anyone has an idea ?
kr,

I found the origin of my problem (ut not the olution ) It is the field cpr_extid which causes the error. The system fills in the project number (exxtended with zero's) and this causes the erroneous record. I don 't know a lot about data entry profiles, but is it possible that it is caused by some sort of copy ?
We don 't have this problem with other clients..

Error -50103 occuring in one program, but not occuring in another similar program

Hello,
I'm a new user of LabView and I'm trying to figure out how a part of this programming process works. Anyway, the block diagram of the working program consists of the first two pictures (C:\Users\Labview\Pictures\errorsetupnew1.jpg -and- C:\Users\Labview\Pictures\errorsetupnew2.jpg). The parts in question are the DAQAssistant9 and DAQAssistant12 in the lower half of the diagram. When I run the program, everything goes fine.
So now I'm trying to run two other programs that both share the same properties as these two DAQAssistants, but they are in two separate programs. When I run one program, it works, but when I run the other program, Error -50103 occurs at DAQmx Control Task.vi:10. Pressing continue yields Error -50103 occuring at DAQmx Read (Analog 1D Wfm NChan NSamp).vi:3.
So my first attempt at solving it was to consolidate it into one program and run it all together, however the same error shows up. I isolated the two While loops which seem to be causing the problem into a test program (third picture) and the error occurs there as well.
My question is what is different from the program in the first two pictures that is allowing the program to run correctly and the test program (which can be extended to the program that I need to work).
I'm new, so please let me know how many beginner mistakes I might be making here!
Thanks
Attachments:
errorsetupnew1.jpg ‏137 KB
errorsetupnew2.jpg ‏113 KB
errortest.jpg ‏82 KB

I'm not currently at the computer with the files in question, but what if I attached those instead when I got the chance? The problem is that I don't believe I am using the same DAQ resource in two different tasks. The command line runs correctly in one, but can not run in the other even though the part giving the error is just a copy of the other program.
I'm trying to run through the previous posts about this particular error but the LabView lingo is something I'm still getting used to. Thank you for bearing with me and helping.

G560 PXE error; OneKey Recovery seems to work, but then I get BSOD upon boot

I've got a 3-year old G560 and a few days ago, I ran into a PXE error out of the blue. I didn't really change anything about the computer's setup, and it may have been caused by commuting the laptop.
I already went through the whole F2 setup regimen of disabling network boot, changing over to compatible mode, trying every combination of boot order, etc.
When I was in compatibility mode, I was able to get the OneKey Recovery to work. There's no DVD involved, seems like it's stuck in that partition. I never set a restore point, but I didn't mind a factory reset. So I did the OneKey factory reset and it took about 15 minutes and it seemed to be okay, but then when I try to start the laptop, it will show the Windows logo, freeze there for a few seconds and then it flashes the blue screen of death for a split second (impossible to capture the error codes).
If I try it in safe mode, it shows the files that are being loaded, and it BSODs right after classpnp.sys
Now, I guess my main question is if OneKey will appear to work and yet maybe the HDD (hard drive) does not work. Could it be a matter of just replacing the hard drive? I did pull out the hard drive and re-mount it. Also the motherboard and re-mounted it. Is the OneKey function separate from the hard drive?
The laptop is so old that I wouldn't want to invest much money in its repair (warranty is past expiration date), but it's also been my daily computer, so I wouldn't mind if it was just a case of replacing a hard drive. With these problems, would it just be possible to make Ubuntu into my primary operating system by using an install disc?

hi stophammertime,
Welcome to the Forums.
It looks like you have some bad sectors on the HDD that's why the OKR didn't work or for some reason, OKR worked but the bad sectors corrupted the OS installation files. To verify this, you will need to run diagnostics on the HDD (try ultimatebootcd as it has diagnostic tools for ever brand of HDD's)
Also, the OneKey Recovery runs on a hidden partition on the HDD (usually the last few sectors of the drive). It's possible to trigger the OneKey Recovery if the partition structure isn't damage but if the target drive has bad sectors (i.e. Drive C:\), it may fail to image the drive or corrupt the installation files.
If verified that you have bad sectors on the HDD, you will need to replace the HDD and from here, you can:
1. Use a recovery disc to restore the default OS (this is only psosible if you have created one using this method)
2. If you can still read the COA product key at the bottom, you can burn an ISO copy on this website and use it to clean install Windows into your PC (if you get issues activating Windows, try to activate by phone).
3. Scratch Windows and use Ubuntu as you're primary OS.
Hope thish elps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Access to NAS - Error -43; with tiger it worked but not with leopard

Similar Messages

Maybe you are looking for