Access to OBDC connectivity

Guys,
I've an access table which is linked to an Oracle table.
Everytime I open the access table,an ODBC login page appears where I've to enter the login credentials everytime for Oracle connectivity.
Is there anyway that I could make my access remember the Oracle connectivity parameters,so that it doesn't prompt for login everytime?
Thanks,
Bhagat

hi
Well, I haven't found any such login dialogbox prompting for username/password.
I linked it successfully and its working fine and refreshing both the tables from
(Oracle and MS-Access) automatically.
But, the same thing happening here as you mentioned in VisualBasic Form.
when I connect to Oracle via VB form using ODBC service every time it prompts
for username/password before form is run.
Which Driver you have selected for DSN?

Similar Messages

  • Using 79xx Phone PC access port to connect a Netgear 5 port switch

    Cisco documentation indicates that on 79xx phones you can "Use the PC access port to connect a network device, such as a computer, to the phone".  What types of problems might be encountered if that device is a Netgear Fast Ethernet Unmanaged FS105 five port switch?  Is there any documentation indicating whether this "supported" or "not supported"?
    I know that the speed on the devices connected to the Netgear will be cut to 10/100.  The devices connected to the Netgear would include - at a minimum - a computer and a Cisco wireless access point.  Other devices which might be connected could include additional computers and/or a printer.
    The computer(s) would also need to access a distributed video stream daily.
    We are running CallManager 8.6.2.21900-5 with phone types: 7940, 7941, 7945, 7965
    Thanks for any insight you might be able to provide.

    Will Cisco support you doing this? Not likely.
    Will it work? I suppose, in theory, it should. Just don't complain if it doesn't.
    GTG

  • After putting my iPad onto airplane mode it won't let me access apps without connecting to iTunes but it won't let me connect to iTunes how can I resolve this?

    After putting my iPad onto airplane mode it won't let me access apps without connecting to iTunes but it won't let me connect to iTunes how can I resolve this?

    Try "Pacifist"!
    Pacifist is an application for Mac OS X that opens up .pkg installer packages, .dmg disk images, .zip, .tar, .tar.gz, .tar.bz2, .pax, and .xar archives, and more, and lets you install individual files out of them. This is useful if you need to install just one file out of a package instead of the entire package

  • I can't submit my podcast - Need Access to iTunes Connect?

    Hi, I need access to iTunes Connect to add in my podcast. 
    I was given this link:  https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa
    But when I try to login I'm told my appleID does not have the permission.
    My apple ID is [email protected]
    The whole thing is that I tried to change from my regular feed: http://feeds.soundcloud.com/users/soundcloud:users:70842329/sounds.rss 
    To my feedburner feed: http://feeds.feedburner.com/bhadpodcast
    And it ended up removing my show entirely.  Whenever I try to add my show back I get an error that either it appears it's been added, or it's already added but I'm getting no confirmation or any updates from iTunes that it's being done. 
    Please advise!  I just want to continue using the soundcloud feed link and I can't get it updated.  When I search for my podcast in iTunes I can't find it.  When I look at the podcast page from what I already downloaded it shows new episodes but won't play them. 
    I have been back and forth with email support.  No will will help me and it's been close to a month.  I can't keep doing this, someone please help.
    Thank you.

    I have received the same "We experienced a timeout connecting to this feed at this time. Read timed out." message since last week!

  • Define access point to connect?

    A couple of applications on my phone, particularly Ovi Maps keep doing this and it's getting REALLY annoying.
    Start using the application, it comes up with the following:
    "Network connection required.Define access point to connect?
    Then it'll give me a selection from a list of my networks various protocols.
    It will regularly ask me again and again while the app is running, often coming up in front of other applications i am using at the time!
    How can I stop this?
    I don't want to have to define anything for specific applications. I want my phone to connect in one of two ways without my input:
    1. If I am within range of a Wifi connection it knows, connect via that.
    2. If not, connect via 'O2 Active'
    Is there a way I can set this so my phone just does the above and never asks again?

    jezston wrote:
    A couple of applications on my phone, particularly Ovi Maps keep doing this and it's getting REALLY annoying.
    Start using the application, it comes up with the following:
    "Network connection required.Define access point to connect?
    Then it'll give me a selection from a list of my networks various protocols.
    It will regularly ask me again and again while the app is running, often coming up in front of other applications i am using at the time!
    How can I stop this?
    It is the Assisted GPS positioning method access found in Menu > Settings > Application Settings > Positioning > Positioning server use which keeps asking for a Network access point not OVI Maps application itself which may be set "Offline" or "Online".
    If you have not set "Save location info" = No - in Camera > Options > Settings - you may get the same response.
    Happy to have helped forum with a Support Ratio = 42.5

  • Filter a OBDC connection

    Hi I am using a OBDC connection to connect to our DB. I need to filter my employee list based on if they are active or not.
    I tried a SQL statement but I seem to be able to only draw on the data from tables. Queries wont work.
    I can see the Employees table and select names but I want to prefilter only active employees.
    Thanks

    user575089 wrote:
    sabre150 wrote:
    Iterate through the list looking for students that are active and add them to a new list.I'm worried about time complexity and hence I posted ....because I'll be doing such filtration for couple of lists .To check each student you have to visit each student O(N). To create a list you have to create a new list ad add each active student to it.
    How big are the lists and how often do you have to do this filtering.
    >
    Is there any other approach to think about in java side ?I can think of slower methods! i.e. clone() a list then iterate through the clone() removing ones that are not active.

  • Message: "Access denied cannot connect"

    Running Network Magic (5.5.9118.2-Pure0) on Windows XP SP3 (2 machines) and Vista SP1 (1 machine). Receive the message "Access denied cannot connect" when trying to print to one of two printers hardwired to the Vista machine from one of the XP machines (laptop). The Vista machine can print to the other XP machine (desktop) and the laptop can also print to this machine. I deleted the printers from the laptop, set the printer sharing off on the Vista machine, reshared the printers and I still receive the error message. File sharing across all three machines is working fine.
    Solved!
    Go to Solution.

    Hi, is your network type set to public in Network and Sharing Center?  Also make sure that File and Printer Sharing, Public Folder Sharing and Network Discovery are enabled.
    My Cisco Network Magic Configuration:
    Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
    Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
    Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
    Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
    Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

  • I have an app idea project going on but I have no access to itunes connect so I can send my idea to the app developers and see what their opinion is about it.Do you know any other ways that can help me promote my idea so it can be further developed?

    I have an app idea project going on but I have no access to itunes connect so I can send my idea to the app developers and see what their opinion is about it.Do you know any other ways that can help me promote my idea so it can be further developed?

    You can not merge accounts.
    Apps are tied to the Apple ID used to download them, you can not transfer them.

  • Accessibility in Adobe Connect | Learn Adobe Connect | Adobe TV

    Learn about keyboard shortcuts as an alternative to navigating with a mouse. Learn how Adobe Connect works with screen-reader software.
    http://adobe.ly/zh22Xu

    Can anyone explain why the video regarding accessibility of Adobe Connect does not include Closed Captioning? Seems to be the most ridiculous oversight yet.

  • Can documents saved on my time capsule be accessed if not connected i.e. I am away from home and want to access documents saved on my time capsule

    Can documents saved on my time capsule be accessed if not connected i.e. I am away from home and want to access documents saved on my time capsule

    Yes, if you setup one of the methods.. see
    https://discussions.apple.com/docs/DOC-3413
    You must use a Mac for any of those.. if you want to use some other OS tell us. 

  • Please can someone help me to access remote desktop connection

    Please can someone help me to access remote desktop connection on my macbook pro 13inch. I do have office 2011 installed.

    Hi Tartan Pearl,
    Welcome to the Apple Support Communities!
    It sounds like you may need help with a forgotten passcode on your iPad. If this is the case, please refer to the attached article for information on how to troubleshoot this situation. 
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    Have a great day,
    Joe 

  • One Touch Access Could not connect on the selected...

    Hi,
    I need some help, ever since I upgrade my PC Suite to PC Suite 7.1.26 I get this "One Touch Access Could not connect on the selected device"
    FYI, I connect through cable USB and I'm using N85
    Really hope somone can help me on this..
    Rgrds

    Hi,
    Please check SAP note:
    1570958 - SAP Business One Integration Technology Installation on
    Windows XP - SAP Business One Integration Service Cannot be Started
    Thanks & Regards,
    Nagarajan

  • Why does my iPod clock keep changing and then I can't access anything without connecting charger

    Recently my iPod keeps changing time. It's seems to be losing time. When this happens I can't access anything without connecting lead and turning it off briefly.

    Could the battery be dying?
    Have yu tried the standard fixes:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPod to factory defaults/new iPod.

  • Help with OBDC connection in Windows 7 64bit with Office 2010 32 bit.

    Hi,
    Many moons ago I wrote an application in Java that configured XP machines after they were sysprep’d and deployed. I am currently migrating all our workstations to Windows 7, and was checking my application still worked and queries the correct registry keys etc.
    As it turns out however I don't even get going as I believe the application is unable to connect to the ODBC Microsoft Access Driver in Windows 7 64bit with Office 2010 32 bit. Below is the code I have always used and no longer works. I am hopeful that someone can tell me how to modify the command to work on Windows 7 64bit. If I browse to C:\Windows\SysWow64\OBDCad32.exe all the drivers I need are there I think, but if I open OBDC from Administrative Tools the Drivers tab is empty but for SQL. Anyway I will shut up and below is the code I used to use:
         public IOMakeConnection()
         dm = new DisplayMessage();
         ioed = new IOEncryptDecrypt();
         url = "jdbc:odbc:DRIVER=Microsoft Access Driver (*.mdb);DBQ=" + getPath() + "Config.mdb;Uid=admin;Pwd=password";
              try
              Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
              connection = DriverManager.getConnection( url );
              catch( Exception e )
              system.out.println( "" + e );
              errorObtainingPath();
    The exception is always thrown as my little app that requests the database path always loads.
    Thanks in advance,
    Cheers Kris

    Hello again,
    Sorry for the delayed response, I have been out of the office for a few days.
    I have solved the issue, and as stated above the issue was the way I was launching the application. Below is a summary of the issue and the resolution.
    My problem was that in Windows 64bit if you click on ODBC in Administrative Tools the Drivers Tab only includes an SQL Driver, and my code reference a Microsoft Access Driver to query the database. That said however if you browse to C:\Windows\SysWow64 and open obdcab32.exe it opens the 32bit version of ODBC, and the Microsoft Access Driver (*.mdb) is listed.
    Basically what I need to do therefore is get my code to access the “32bit” version of ODBC in a Windows 7 64bit environment, so my application was able to read the necessary information from the Access Database associated with it.
    I understand that this is not a coding issue directly, but assuming people still use Java to open an Access Database on a Windows 7 64bit OS, this may be of help.
    So previously I ran the following command, from the “Target” box in a shortcut to execute the java code:
    cmd.exe /C SET CLASSPATH=C:\SCAConfigurationUtility && CD\SCAConfigurationUtility && JAVAW SCAConfigurationUtility
    Windows 7 64bit, defaults to the 64bit version of Java, and just seems to plain fail if you only have the 32bit version installed. To overcome this I forced the java executable that I was using to be the 32bit version, and used the system switches available in Java 7 (-cp does not appear to be available in Java 6)
    So my Shortcut now has this in the “Target” box:
    java.exe -d32 -cp C:\SCAConfigurationUtility SCAConfigurationUtility
    And this in the “Start in” box:
    "C:\Program Files (x86)\Java\jre7\bin"
    Or by using the target below the same shortcut works in XP
    "C:\Program Files\Java\jre7\bin"
    Thanks for all the help,
    Regards Kris.

  • Upgraded from CR XI to 2011 and now my old 2005 SQL OBDC Connection is gone

    I upgraded from a working CR XI (v11.0) product to CR 2011 v14.0.2.  But when I try to open an old report from CR XI, it prompts me to a OBDC (RDO) Data Source Selection Window and my old Database connection is not there to select. 
    I use SQL Native Client 2005.90.3042.00 for my old SQL Server DSN Config with CRXI.  How do I select my old DSN Configuration so I can access my data?
    If I run CR XI, I can still connect with the above mentioned configuration without any problems.
    Edited by: Jeff W1800 on Feb 8, 2012 1:17 AM
    Edited by: Jeff W1800 on Feb 8, 2012 1:01 PM

    Hi Jeff,
    That is strange.... I've never heard of that happening before. I have 100's of reports that have no problems. What OS are you using? CR 2011 fully supports ODBC and SQL Server 2005 and 2008. How did you create the DSN and is it a User DSN, System DSN or file DSN?
    Actually we did not support the SQL Native Client in XI, you had to use the MDAC version "SQL Server" to connect. Not sure why it worked, likely because the SQL generated wasn't complex so it mapped to that driver easily.
    There have been others who have discovered using the SQL Native 10 client that gets installed with SQL Server 2008 Client Tools works great for both 2005 and 2008. You can download it from MS's site, get the 32 bit version. CR 2011 is still a 32 bit application.
    It does require you to update your DSN to the Native 10 driver, update, verify and save your old reports also to get them to the new CR 2011 file format.

Maybe you are looking for