Access to open files and folders on PC

Nokia n8
Need to get access to files via standard windows interface (used wi-fi)
Like shown in the screenshot
How to do this in Symbian Anna?
Perhaps it possible to connect a folder on my computer as a separate drive on Nokia n8?
for exemple folder: "\\192.168.1.5\disk"

Finder > Preferences
Turn it off it irks you. I find it exceedingly useful.

Similar Messages

My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.

have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya!

File Server Role: Slow access for "opened files" and slow Explorer browsing

Since we migrated our fileserver from Windows Server 2008 R2 to Windows Server 2012 we are facing two major problems:
1. Opening files which are already opened by other users takes about 1 minute before the file actually opens. This is not only for Office files such as Excel and Word, but also for other (not office) files. Again, this problem only rises when the file(s)
is/are already opened by another user. There seems to be a sort of "Lock" check time which is about 45 to 60 seconds.
2. The other problem is browsing via Explorer through the network drive (all clients are Windows 7 clients). Half of the time there is some kind of "hick up" with displaying the results of the folder. I cannot figure out a patern, but if there
is no "hick up" then browsing is very fast (also in the busiest times of the working day)... If there is a "hick up" the result can take about 50 seconds to display the content of a folder.
I suspect the SMB implementation / settings of Windows Server 2012 which are causing the problems...
Things I tried:
1. Changed the Oplocks wait time to 10 seconds (which is the minimum). The result is that openening files does indeed go some faster (still taking about 45 seconds).
2. Disabled SMB2: the result is that browsing is fast... Opening files does go faster. BUT: we are then facing other problems like some files are not able to open... This setting was, after getting a lot of complaints from the users, changed back to enabled
SMB2.
3. Within the NIC card properties I disabled "QoS packet Scheduler", "Link-Layer Topology Discovery Mapper I/O Driver", "Link-Layer Topology Discovery Responder" and IPv6 (as we only use IPv4).
All above with not the promising results.
The server is a dedicated (virtual machine on vSphere 5.1) fileserver.
Please Advice since this is not workable, and we have postponed the migration of the fileserver for our aother location.

Hi Dave,
I suggest you disable all third party applications like Anti-Virus application to test if it could reduce the waiting time when accessing a file.
Here are some related threads below that could be useful to you:
DFS Slowness when Opening Microsoft Documents and Excel Spreadsheets
http://social.technet.microsoft.com/Forums/windowsserver/en-US/61ec9a99-0027-44cb-815c-0da9276c1c96/dfs-slowness-when-opening-microsoft-documents-and-excel-spreadsheets?forum=winservergen
Opening files over network takes long time
http://social.technet.microsoft.com/Forums/windows/en-US/c8ddb65f-8a17-4cee-afd4-dfc09e99d562/opening-files-over-network-takes-long-time?forum=w7itpronetworking
opening folder or file takes over a minute on Windows 2008R2 File server
http://social.technet.microsoft.com/Forums/windowsserver/en-US/b9aa98c4-3ef7-4e6d-810d-6099e72b33f6/opening-folder-or-file-takes-over-a-minute-on-windows-2008r2-file-server?forum=winserverfiles
Best Regards,
Amy Wang

Icon animation at opening files and folders

Hi Guys! I have a machine upgrade to new Core2Dou iMac, and transfering the data via Firewire. And as i remember well, if i click onto an icon on the desktop, it has a flashing-zooming effect while open the window. But now for example the Macintosh HD icon doesnt do this animation, just open the zooming finderwindow without this icon flashing-zooming effect. It works with any other files or applications, but as i remember it has to work also with the folder icons. Or do i remember wrong?
iMac 20" Intel Core2Duo Mac OS X (10.4.8) 1,5 GB RAM, 250 HDD
iMac 20" Intel Core2Duo Mac OS X (10.4.8) 1,5 GB RAM, 250 HDD

Hey thanks for the idea about passing the array of strings, I got it working that way. Heres the code I used if anyone else is stuck
* A platform-independent way to open a music, picture or text file in the correct external application
* @param file the file you want to open
public static void openFile(File file)
System.out.println(file.getPath());
String fileType = ResourceFinder.getType(file);
String[] cmdArray = new String[2];
//Windows DOS commands
if(File.separator.equals("\\"))
if(fileType.equals("Music"))
cmdArray[0] = "\"C:\\Program Files\\Windows Media Player\\wmplayer.exe\"";
else if(fileType.equals("Picture"))
cmdArray[0] = "mspaint.exe";
else if(fileType.equals("Text"))
cmdArray[0] = "notepad.exe";
cmdArray[1] = "\"" + file.getAbsolutePath() + "\"";
//Mac UNIX commands
else if(File.separator.equals("/"))
cmdArray[0] = "open";
cmdArray[1] = file.getAbsolutePath();
//run the command to open the file
try {
Runtime.getRuntime().exec(cmdArray);
catch (IOException ex)
ex.printStackTrace();
}

How do you change to single click to open files and folders?

How do you change from double clicking a file/folder, to single clicking (web style)?

Finder > Preferences
Turn it off it irks you. I find it exceedingly useful.

Trouble with locked/read only files and folders

After reinstalling OSX I have an external harddrive with locked files and folders. I´ve heard that it is possible to unlock all files and folders from Terminal (it will take hours to unlock manually). Anyone who knows a script that will set read and write access to all files and folders on a hard drive?

For locked HDs and volumes:
http://discussions.apple.com/thread.jspa?threadID=2329689
Also, see Niel's guide.

Re: Qosmio G - Hidden files and folders not showing

Hi folks, I have some hidden files and folders, which I was able to access before, and I used to click on the 'organise tab', view, Advanced Settings, show hidden files and folders, in order to hide or show the files.
Unfortunately there seems to be a problem, I just can't access my hidden files and folders any more, even when I go through this method.
someone help me out please, ASAP....
THANKS

Hi aaz911,
First of all it would be nice from you if you post more informations about your notebook model and operating system. This should be done always to get a detailed answer.
Anyway, I never heard about such a problem but make sure that every files will be displayed:
Start Windows Explorer > Tools > Folder Options > View and enable the following options:
-Hidden files and folders: Show hidden files and folders
-Hide protected operating system files (this should be disabled > without mark).
Furthermore can you find these missing files using Windows search?
If not I assume the files are deleted from somebody or due a virus. :(

Windows 7 won't allow me access to some of my files and folders

I installed a new copy of Windows 7 Professional SP1 on a new PC several months ago. I then restored my documents from a backup made on my old XP system. Ever since installation, I have had problems with Windows denying me access to some of my files
and folders. I have full administrative rights on the machine. The various problems I've had, and steps I've taken to resolve them are:
1. Try to open a file and get a message telling me I need permission from Steve to open this file. I am Steve.
2.Try to open a file and get a message telling me I don't have permission to open it, but click this button to get permanent permission. I click the button, but still don't have permission.
3. I then started opening the security settings for individual files and setting myself to have full access, and as the owner. This worked for individual files.
4. I then tried setting the same security settings for entire folders. This didn't work and didn't improve anything.
5. I tried setting the security settings so that Administrators owned the files/folders (I am an administrator). This also didn't achieve anything.
6. After several months and still getting these messages, I got sick of trying to overcome them and decided to apply these security settings to my entire C: drive. I set myself to have full access and to be the owner of the C: root directory and all sub-objects.
7. I inserted my Windows installation disk and tried to run the System Repair. It told me that System Repair was not compatible with the version of Windows I was running! WTF???
Not only did setting permissions for the entire C: drive not help me, it has made matters a WHOLE lot worse. I now don't have permission to open almost all my files/folders. Most applications I try to run (Word, Excel, etc.) either tell me they can't open
a file or let me open and edit it, then tell me I don't have permission to save to that location. When I press the Send/Receive button in Outlook, it now tells me I don't have permission to perform that action. I've tried going back to a restore point before
I made this change, but that didn't change anything either.
This problem has been driving me insane for months and now my PC is almost completely unusable and I'm considering a disk format and re-install Windows. When I initially installed it, so many problems came up in the first few weeks that I'm very reluctant
to go through this procedure again. I spent hours and hours trawling the web looking for solutions to things that didn't work.
Does anyone have any good news for me? Because as far as I'm concerned, Windows 7 is so far a piece of garbage.

Hi Steve1904,
So you have use the backup and Restore to restore your files from Windows XP to Windows 7 directly?
This should be considered not work.
If you would like to transfer files between Windows XP and Windows 7, you need another tool called Windows Easy Transfer.
See the article below if you would like to upgrade from Windows XP to Windows 7:
Upgrading from Windows XP to Windows 7
If possible, follow the steps there, then things should be OK.
Best regards
Michael Shao
TechNet Community Support

Auditing failed access to files and folders in Windows Storage Server 2008 R2

Hello,
I've been trying to figure out why I cannot audit the failed access to files and folders on my server. I'm trying to replace a unix-based NAS with a Windows Storage Server 2008 R2 solution so I can use my current audit tools (the 'nix NAS
has basically none). I'm looking for a solution for a small remote office with 5-10 users and am looking at Windows Storage Server 2008 R2 (no props yet, but on a Buffalo appliance). I specifically need to audit the failure of a user to access
folders and files they are not supposed to view, but on this appliance it never shows. I have:
Enabled audit Object access for File system, File share and Detailed file share
Set the security of the top-level share to everyone full control
Used NTFS file permissions to set who can/cannot see particular folders
On those folders (and letting those permissions flow down) I've set the auditing tab to "Fail - Everyone - Full Control - This folder, subfolders and files"
On the audit log I only see "Audit Success" messages for items like "A network share object was checked to see whether client can be granted desired access (Event 5145) - but never a failure audit (because this user was not allowed access by NTFS permissions).
I've done this successfully with Windows Server 2008 R2 x64 w/SP1 and am wondering if anybody has tried this with the Windows Storage Server version (with success of course). My customer wants an inexpensive "appliance" and I thought this new
variant of 2008 was the ticket, but I can't if it won't provide this audit.
Any thoughts? Any of you have luck with this? I am (due to the fact I bought this appliance out of my own pocket) using the WSS "Workgroup" flavor and am wondering if this feature has been stripped from the workgroup edition of WSS.
TIA,
--Jeffrey

Hi Jeffrey,
The steps to setup Audit on a WSS system should be the same as a standard version of Windows Server. So please redo the steps listed below to see if issue still exists:
Enabling file auditing is a 2-step process.
[1] Configure "audit object access" in AD Group Policy or on the server's local GPO. This setting is located under Computer Configuration-->Windows Settings-->Security Settings-->Local Policies-->Audit Policies. Enable success/failure auditing
for "Audit object access."
[2] Configure an audit entry on the specific folder(s) that you wish to audit. Right-click on the folder-->Properties-->Advanced. From the Auditing tab, click Add, then enter the users/groups whom you wish to audit and what actions you wish to audit
- auditing Full Control will create an audit entry every time anyone opens/changes/closes/deletes a file, or you can just audit for Delete operations.
A similar thread:
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/da689e43-d51d-4005-bc48-26d3c387e859
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

Problems opening files in DW CS4 - not all files and folders are showing

Hi!
I'm trying to change some already existing files on the homepage but when I click the Open button, it doesn't show all the files and folders, even if I ask it to show all files. When I open the ftp folder in Explorer, I can see everything. I'm using Vista and Dreamweaver is version 10.0 Build 4117.
Most of the unaccessible files and folders were created using Frontpage a long time ago but this also happens when I create new files, although the new ones I created used one of the old ones as a template. Any help would be appreciated! It's rather annoying not to be able to access all the files.
Thanks a lot!
Mathias.

Not sure if that was meant for me
You can tell who was the intended recipient by looking at the header of the message -
6. Sep 10, 2010 6:50 AM in response to: FordGuy48 <<----
Re: Problems with embedding .flv files in DW CS4....
A link to the page would help us diagnose your problem.
Safari tells me that this file -
FLVPlayer_Progressive.swf
is not where you have told the page to expect it. Did you upload it?

My desktop files and folders no longer appear on the screen. I think this is a result of an iPhoto updating. It appears (from getting info) that now Desktop is being treated like a normal file for which an application to open it must be supplied. Help?

My desktop files and folders no longer appear on the screen. I think this is a result of an iPhoto updating. It appears (from getting info) that now Desktop is being treated like a normal file for which an application to open it must be supplied. Can anything be done? Incila

You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one.

How do I get Firefox to show hidden files and folders. It should be available under help but help only gets as far as Open Containing folder and doesn't go on to show hidden files and folders

I am trying to find the status of Adobe Flash Player on my computer. I am advised that it exists in Firefox's hidden files and folders but I cannot find such a folder

You have an older version of Flash installed - Shockwave Flash 10.0 r45
You can see that for yourself in Tools > Addons > Plugins
"Show hidden files and folders" is a function of the Operating System, not an application such as Firefox. Windows Control Panel > Folder Options > View - Advanced Settings

Problem opening a project into NWDS - Files and Folders disappears!

Hi Gurus,
My co-worker developed a Web Dynpro project in your PC, so I copied all files and folders to my PC.
When I import this project into NWDS in my PC some files and folders strangely disappears physically from Windows causing error in project!
Somebody haves idea what is happening?
Thanks!
Robson

Hi,
Follow these steps , how to import a Web Dynpro project in to NWDS.
http://help.sap.com/saphelp_nw04/helpdata/EN/80/c12041aa7df323e10000000a155106/content.htm
Thanks
Krishna

Cannot see file and folders copied from other windows 8

Hi everyone,
The problem is the next:
I have new PC for that i was asked to setup and install software, i perform on it clean windows 8 install, it have single HDD 1TB that was partitioned by regular windows setup option to system drive C: 100GB and all left space was partitioned as drive D:
After setup finish i only boot to system to check that everything is OK and without to make ANY change to windows shut it down.
I physically disconnect HDD from new PC and connect it via standard USB 3 docking device to my own PC that also run windows 8 i can see the new connected HDD with all partitions without any problem! Than i create on second partition on new drive folder and
copy there some files, after copy finished i disconnect the drive in safe way by performing "eject" option in windows.
i connect new drive back to new pc, boot to windows and access the second partition and it ... empty, no folder or files on drive, it also show like no space was used !!!
MOST IMPORTANT ! - Why it don't looks like security or permission or even hardware problem - NO any major security changes was performed on my own (old) PC, but most important fact when i connect other hdd to same dock station and create folder and copy some
files and then connect it to NEW PC - problem does not exist !!! i can see and access without any problem the folder and files on both PC's !
I also tried:
to reinstall windows on new pc
to create or delete partition after setup in both PC's
to check folder and drive permissions and adding "everyone" with "full control"
to turn on "show hidden files and folders" and "system files" too
to copy or create new different type files
Interesting - if i create a folder in NEW PC i can see this folder on OLD PC and copy files to it, but whet i connect drive back to NEW PC it sometimes show the folder have those files and even use the appropriate space and programs even try to open those files
without any security warnings but it cannot be open properly because files looks corrupted !
Thanks for any help !

Hi,
According to your description, I don't think this is system problem. More like HDD or its interface problem.
Have you tried to reconnect your new HDD to your own computer again after you copy some file to it but couldn't find anything on new computer. If there is problem in new PC, how about your own PC?
Please have a try, If there was any progress, feel free let us know.
Roger Lu
TechNet Community Support

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work. Help?

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
^^ that's the main problem. Here's the full history.
I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

Access to open files and folders on PC

Similar Messages

Maybe you are looking for