Access to Outlook Anywhere does not work

Good evening,
I recently installed an Exchange Server 2013 CAS / MB.
Until now, the server presented a few errors (mainly in the
event log) that does not seem to significantly influence functionality.
This week I published the server on the Internet and verified various malfunctions
related to the access from outside.
In particular from outside:
1 - OWA does not work with Windows integrated authentication, it works with the Forms based authentication;
2 - Outlook Anywhere does not work from internet.
I've done a lot of research and testing without success.
With regard to the first issue (which is not a priority but can relate to second one)
add that in Firefox I get a first authentication request. If
I enter credentials it ask again for identical authentication (repeatly), if I cancel it shows a second one that instead allows me access (are slightly different).
I assume that the first is the integrated Windows application and the second is basic authentication.
Internet Explorer shows me only the first authentication request and if I cancel shows blank page.
The problem is
priority 2:
Outlook connects without problems on LAN network, the Internet
seems to download the correct information
(autodiscover), but then does not connect
to the server (connection to Microsoft Exchange is unavailable).
If you manually edit the settings,
auto-configuration server returns as
a [email protected]. If I change
manually the server (and proxy settings
http), the result does not change.
- Setting information -
The server is installed
in the LAN network and is exposed on the Internet through
a firewall (Pat on port 443, et al. not 80)
on a public address.
The public and private DNS have been configured with a
host record (A) and two
CNAME (webmail and autodiscover).
The internal Outlook clients connect
with autodiscover and HTTPS /
NTLM / SSL (Outlook connectivity
status).
IMAP, SMTP, POP, ActiveSync function.
Exchange remote connectivity analizer retrieves Autodiscover information but doesn't pass test for RPC/HTTP access (it discard accesson
port 443 and try port 80, SPF isn't configured).
The navigation to the url
https://proxyexternalURL/rpc/rpcproxy.dll  has the same behaviour like problem 1.
Test-OutlookConnectivity returns unmanaged error ('WARNING: An unexpected error has occurred and a Watson dump is being generated: Failed to find the probe result for invoke now request id -- and probe workdefinition id --').
Errors in eventviewer: 5011 - WAS (one time), 139 - MSExchange OWA (some not ripetitive), 3028 - MSExchangeApplicationLogic (every 6 hours), 106 - MSExchange common (many during working hour), 65535 - application (some at nighttime 00.00 - 03.00 a.m.), 1006
- MSExchangeDiagnostic (every 30 min), 6002 - MSExchange Mid-Tier Storage (about every 5 minutes), 5 - MSExcahnge Workload Management (one time).
Ask for further information.
- Cmdlet and Autodiscover output -
Get-OutlookAnywhere | fl name,*auth*,*ssl*,*host*
Name                               : Rpc (Default Web site)
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
SSLOffloading                      : True
ExternalClientsRequireSsl          : True
InternalClientsRequireSsl          : True
ExternalHostname                   : webmail.name_domain.test
InternalHostname                   : webmail.name_domain.test
Get-OutlookProvider | ft -autosize
Name     Server CertPrincipalName                      TTL
EXCH            msstd:webmail.name_domain.test         1  
EXPR             msstd:webmail.name_domain.test         1  
WEB                                              
     1  
Get-AutodiscoverVirtualDirectory | fl name,*auth*,*url*
Name                          : Autodiscover (Default Web site)
InternalAuthenticationMethods : {Basic, WSSecu.testy, OAuth}
ExternalAuthenticationMethods : {Basic, WSSecu.testy, OAuth}
LiveIdNegotiateAuthentication : False
WSSecu.testyAuthentication      : True
LiveIdBasicAuthentication     : False
BasicAuthentication           : True
DigestAuthentication          : False
WindowsAuthentication         : False
OAuthAuthentication           : True
AdfsAuthentication            : False
InternalUrl                   :
ExternalUrl                   :
Get-MapiVirtualDirectory | fl name,*auth*,*url*
Name                          : mapi (Default Web site)
IISAuthenticationMethods      : {Basic, Ntlm, Negotiate}
InternalAuthenticationMethods : {Basic, Ntlm, Negotiate}
ExternalAuthenticationMethods : {Basic, Ntlm, Negotiate}
InternalUrl                   : https://webmail.name_domain.test/mapi
ExternalUrl                   : https://webmail.name_domain.test/mapi
Autodiscover.xml
<?xml version="1.0" encoding="utf-8"?>
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
  <Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
    <User>
      <DisplayName>user</DisplayName>
      <LegacyDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=e4c0c18c8f214afbb5152bb08823179d-user</LegacyDN>
      <AutoDiscoverSMTPAddress>user@name_domain.test</AutoDiscoverSMTPAddress>
      <DeploymentId>d60c71c9-3740-404c-a38c-aa24e6105432</DeploymentId>
    </User>
    <Account>
      <AccountType>email</AccountType>
      <Action>settings</Action>
      <MicrosoftOnline>False</MicrosoftOnline>
      <Protocol>
        <Type>EXCH</Type>
        <Server>72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test</Server>
        <ServerDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test</ServerDN>
        <ServerVersion>73C082C8</ServerVersion>
        <MdbDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test/cn=Microsoft Private MDB</MdbDN>
        <PublicFolderServer>webmail.name_domain.test</PublicFolderServer>
        <AD>DC2.name_domain.test</AD>
        <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
        <EwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EwsUrl>
        <EmwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EmwsUrl>
        <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
        <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
        <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
        <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
        <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
        <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
        <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
        <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
        <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
        <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
        <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
        <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
        <OOFUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</OOFUrl>
        <UMUrl>https://webmail.name_domain.test/EWS/UM2007Legacy.asmx</UMUrl>
        <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
        <ServerExclusiveConnect>off</ServerExclusiveConnect>
        <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
      </Protocol>
      <Protocol>
        <Type>EXPR</Type>
        <Server>webmail.name_domain.test</Server>
        <SSL>On</SSL>
        <AuthPackage>Basic</AuthPackage>
        <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
        <EwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsUrl>
        <EmwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EmwsUrl>
        <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
        <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
        <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
        <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
        <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
        <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
        <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
        <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
        <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
        <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
        <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
        <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
        <OOFUrl>https://webmail.name_domain.test/ews/exchange.asmx</OOFUrl>
        <UMUrl>https://webmail.name_domain.test/ews/UM2007Legacy.asmx</UMUrl>
        <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
        <ServerExclusiveConnect>on</ServerExclusiveConnect>
        <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
        <EwsPartnerUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsPartnerUrl>
        <GroupingInformation>LAN</GroupingInformation>
      </Protocol>
      <Protocol>
        <Type>WEB</Type>
        <Internal>
          <OWAUrl AuthenticationMethod="Basic, Fba">https://webmail.name_domain.test/</OWAUrl>
          <Protocol>
            <Type>EXCH</Type>
            <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
          </Protocol>
        </Internal>
        <External>
          <OWAUrl AuthenticationMethod="Basic">https://webmail.name_domain.test/</OWAUrl>
          <Protocol>
            <Type>EXPR</Type>
            <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
          </Protocol>
        </External>
      </Protocol>
      <Protocol>
        <Type>EXHTTP</Type>
        <Server>webmail.name_domain.test</Server>
        <SSL>On</SSL>
        <AuthPackage>Ntlm</AuthPackage>
        <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
        <EwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EwsUrl>
        <EmwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EmwsUrl>
        <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
        <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
        <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
        <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
        <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
        <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
        <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
        <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
        <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
        <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
        <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
        <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
        <OOFUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</OOFUrl>
        <UMUrl>https://webmail.name_domain.test/EWS/UM2007Legacy.asmx</UMUrl>
        <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
        <ServerExclusiveConnect>On</ServerExclusiveConnect>
        <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
      </Protocol>
      <Protocol>
        <Type>EXHTTP</Type>
        <Server>webmail.name_domain.test</Server>
        <SSL>On</SSL>
        <AuthPackage>Basic</AuthPackage>
        <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
        <EwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsUrl>
        <EmwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EmwsUrl>
        <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
        <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
        <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
        <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
        <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
        <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
        <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
        <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
        <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
        <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
        <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
        <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
        <OOFUrl>https://webmail.name_domain.test/ews/exchange.asmx</OOFUrl>
        <UMUrl>https://webmail.name_domain.test/ews/UM2007Legacy.asmx</UMUrl>
        <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
        <ServerExclusiveConnect>On</ServerExclusiveConnect>
        <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
      </Protocol>
    </Account>
  </Response>
</Autodiscover>
Get-OwaVirtualDirectory | fl name,*auth*,*url*
Name                          : owa (Default Web Site)
ClientAuthCleanupLevel        : High
InternalAuthenticationMethods : {Basic, Fba}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : True
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Basic}
Url                           : {}
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   : https://webmail.name_domain.test/
ExternalUrl                   : https://webmail.name_domain.test/

Follow the results of the test
Outlook Anywhere (RPC over HTTP).
Has been used an account for which
outlook anywhere works. The account
for which the outlook anywhere does not work is
an administrative account and therefore
can not be used in the test.
Autodiscovery returns the
same result for both mailbox.
I'm testing RPC/HTTP connectivity.
Testing RPC over HTTP has not been exceeded.
Test steps
Microsoft connectivity Analyzer is attempting to test the Autodiscover service for user_test@domain_name.test.
Test the Autodiscover service has not been exceeded.
Test steps
I'm trying to contact the Autodiscover service with each method available.
I was not able to contact the Autodiscover service with no method.
Test steps
I'm trying to test the possible URL for the Autodiscover service https://domain_name.test/AutoDiscover/AutoDiscover.xml
The test of this potential URL for the Autodiscover service has not been exceeded.
Test steps
I'm trying to resolve the host name domain_name. DNS test.
I was able to resolve the host name.
IP addresses are returned: xxx.yyy.zzz.www
I'm testing the TCP port 443 on the host domain_name. tests to check that is open and listening.
The door has been opened properly.
I'm testing the validity of your SSL certificate.
The SSL certificate has not exceeded one or more validation controls.
Test steps
Microsoft connectivity Analyzer is attempting to obtain the SSL certificate from the remote server domain_name. test on port 443.
Microsoft connectivity Analyzer got the remote SSL certificate.
Remote certificate subject: E = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name, L = city, S = state, C = test issuer: E = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name,
L = city, S = state, C = test.
I am validating the certificate name.
I could not validate the certificate name.
More info about this issue and how to resove it
The host name domain_name. testing does not match any name found on the certificate and server = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name, L = city, S = state, C = test.
I'm trying to test the possible URL for the Autodiscover service https://autodiscover.domain_name.test/AutoDiscover/AutoDiscover.xml
The test of this potential URL for the Autodiscover service has not been exceeded.
Test steps
I'm trying to resolve the host name autodiscover. domain_name. DNS test.
I was able to resolve the host name.
IP addresses are returned: xxx.yyy.zzz.kkk
I'm testing the TCP port 443 on the host autodiscover. domain_name. tests to check that is open and listening.
The door has been opened properly.
I'm testing the validity of your SSL certificate.
The SSL certificate has not exceeded one or more validation controls.
Test steps
Microsoft connectivity Analyzer is attempting to obtain the SSL certificate from the remote server autodiscover. domain_name. test on port 443.
Microsoft connectivity Analyzer got the remote SSL certificate.
Other details
Remote certificate subject: CN = webmail. domain_name. test, OU = it staff, O = domain_name, L = city, S = city, C = test issuer: CN = domain_name-DC1-CA, DC = domain_name, DC = test.
I am validating the certificate name.
I validated the certificate name.
Other details
I found the host name autodiscover. domain_name. test in the voice of the alternative name of the certificate object.
Elapsed time: 1 ms.
I am validating the reliability of certificates.
I was not able to validate the reliability of the certificate.
Test steps
Microsoft connectivity Analyzer is attempting to generate certificate chains to a certificate CN = webmail. domain_name. test, OU = it staff, O = domain_name, L = city, S = city, C = test.
I failed to build a certificate chain for the certificate.
Other details
Failed to generate the certificate chain.
May be missing the required intermediate certificates.
I'm trying to contact the Autodiscover service using the HTTP redirect method.
I was not able to contact the Autodiscover service using the HTTP redirect method.
Test steps
I'm trying to resolve the host name autodiscover. domain_name. DNS test.
I was able to resolve the host name.
IP addresses are returned: xxx.yyy.zzz.kkk
I'm testing the TCP port 80 on the host autodiscover. domain_name. tests to check that is open and listening.
The specified port is blocked, is not listening or doesn't produce the expected response.
More info about this issue and how to resove it
I encountered a network error while communicating with the remote host.
I'm trying to
find the
SRV DNS record _audiscover._tcp.domain_name.test.
I failed to find
the SRV record of the
Autodiscover service
in DNS.
Some clarifications:
1 - xxx.yyy.zzz.www and xxx.yyy.zzz.kkk
are two static public addresses
of which only the latter exposes Exchange services;
2 - The certificate
*. Domain_name.test is not related
to Exchange services;
3 -I imported the certificate
of the issuing CA on the standalone test PC to validate the certificate.
3- The port 80 is not open and are not published SRV records.
Best regards.

Similar Messages

  • Exchange Outlook Anywhere does not work!

    Hi,
    Im having issues to get the Outlook Anywhere to work.
    Running Exchange 2010 SP2 with RU1 (two HT/CAS/MBX servers) + TMG + HL.
    I have a Geotrust SAN certificate (autodiscover.company.com, mail.company.com, mapi.company.local, legacy.company.com + fqdn of the servers)
    CASArray = mapi.comany.local = HL
    Outlook Anywhere is configured: mail.company.com / basic auth
    All DNS records that are included in the certificate are pointed towards TMG.
    TMG should be configured accordingly aswell as our HL. (have asked our guys to verify this several times...but you never know)
    from testexchangeconnectivity.com I have various results.
    If running RPC/HTTP test with manual specifications it fails...
    RPC proxy server: mail.company.com
    Exchange Server: mail.company.com or mapi.company.local
    msstd: mail.company.com
    but...
    If running the RPC/HTTP test with Exchange server specified as FQDN like SRV01.company.local it works?

    Hi again,
    RPC ports is set under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpc\RpcProxy, se a bunch of 6001, 6002 and 6004 that corresponds to my mapi.company.local, netbios names and more...
    these ports are only beeing used on the exchange server itself? they are capsuled in a 443 package passing through TMG and HL right?
    I can telnet via the HL on port 6001, result:
    ncacn_http/1.0
    HKEY_LOCAL_MACHINE\Software\Microsoft\Rpc\RpcProxy
    Value name: ValidPorts
    Value data: ExchangeServer :6001-6002; ExchangeServerFQDN
    :6001-6002; ExchangeServer :6004; ExchangeServerFQDN :6004
    Note:   *
    ExchangeServer should be the NetBIOS name of Mailbox server.
       * ExchangeServerFQDN
    should be the fully qualified domain name (FQDN) of Mailbox server.
    When you test in testexchangeconnectivity.com, the Exchange server should be the FQDN name instead of the external URL.
    So please change the registry key and reboot the server to take effert. And then try again to see if this works.
    Fiona Liao
    TechNet Community Support

  • Outlook anywhere configuration not working

    Hi There,
    I am running Exchange 2010 with the hub transport and mailbox roles split between two servers. I am trying to set up outlook anywhere and am falling at one small hurdle.
    Al the components are installed and I have opened the RPC ports on our firewall. we have a public IP address that we uses for directing mail, OWA etc and I'm using this for OA. I have created a NAT rule to point traffic to the hub transport server. when
    I run the test connectivity tool it passes on everything except for being able to access port 6001 on the IS store, I am assuming this is because there cannot be a NAT rule for the same ports to a second server as they are a 1-2-1 mapping. I could use some
    assistance on whether or not this is the correct configuration, I thought hat the request would be brokered on the hub transport server and passed internally to the IS store server over the relevant ports. is this wrong?
    Thanks in advance.

    only 443 needs to be open externally.
    6001 needs to be open between cas and mailbox server
    Just to mention one thing, since this thread will get picked up by search engines.
    *ALL* ports must be opened between all Exchange serves and domain controllers.  Firewalls restricting ports are not supported.
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Problem with my iPod touch: Frozen screen, unable to access anything as slider does not work, will not accept a full restore.  Apple Store advised that it is a 'hardware' problem and I could trade-in!

    I am a relatively 'new' user.  Touch was a gift, I used it in a simplistic way - listened to music took a few photos, added a few calendar events.  After a year I then decided to be more proactive and found a few free apps (Solitaire) - then had a the frozen screen problem which I though was connected to low battery, but it wasn't.  I recharged it, still could not access, then tried a full restore and got an error message.  Took it to a Genius Bar and was told it was a hardware problem and as it is out of warranty  I could trade in or just buy a different product.  As this is my first Apple product is this usual?  Do Apple products have a very short shelf life - I anticipated that it would last me longer than a year!  Has anyone else had this problem?  Was it able to be resolved? Or is it worth trying to get it repaired - and if so who can do it - Apple  Store did not offer that to me as an option?

    Sure sounds like a hardware problem. It happens some times. The iPod is just an electrical device.
    Apple will exchange it for a refurbished one for this price. Apple does not repair your iPod.
    Apple - Support - iPod - Repair pricing
    A third-party place like the following maybe less expensive. Google for more places.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Outlook Anywhere is not working

    Hello all,
    I have Exchange 2007 SP3 running.  I have enabled Outllook anywhere.  I have yet to be able to get it to work.  I have been told the only port I need open is 443.  when I go to setup my clients, I do a manual configuration.  for
    the server I enter my internal server name ( I have been told this is how its to be setup), then I go specify the outside URL for the proxy.  I have RPC over HTTP Proxy installed on the server, but when I run Microsoft's test I get the following
    RPC over HTTP Connectivity failed.   This is running on a Server 2008 64-bit machine. 
    Any pointers on what to check would be very helpful.  I have quite a few people that would like to use this, but it fails connecting at the last step in the Outlook setup due to the RPC failure.
    edit-  I also opened my firewall wide open to make sure that wasn't blocking it, and with all ports open it still failed. 
    Thanks
    David

    Hi David,
    Thank you for your question.
     We could disable IPv6 on Exchange server which install on Window server 2008 to check if the issue persist.
    If the issue persist, we could refer to the following steps to reinstall RPC-over-http:
    Disable outlook anywhere using the Exchange Management Console
    Remove RPC proxy component using PowerShell servermanagercmd -r rpc-over-http-proxy
    Reboot the server
    Install RPC proxy component using PowerShell servermanagercmd -i rpc-over-http-proxy
    Enable outlook anywhere using the Exchange Management Console
    Restart the Microsoft Active Directory Topology Service
    Try the test again
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • Outlook Anywhere does not show http in test email auto-config under protocol

    Hi,
    It seems simple to configure/enable Outlook Anyway but I am unable to get it works in my environments.
    Background
    1. Add feature for RPC over http
    2. Enable Outlook Anywhere for all CAS
    3. Properties CAS -> Outllo Anywhere -> mail.abc.com (External host name) with NTLM authentication
    4. Set-OutlookProvider EXPR -CertPricipalName msstd:mail.abc.com
    5. Configure Outlook client -> Connection tab -> Outlook Anywhere -> Select "Connect to Microsoft Exchange using HTTP
    6. Under Exchange Proxy Settings 
    -> Connection settings https://mail.abc.com
    -> Select "Connect using SSL only" and "Only connect to proxy servers that have this principal name in their cert" with msstd:mail.abc.com
    7. Select both "On fast network" and "On slow network"
    8. Under Proxy authentication settings -> NTLM Authentication
    Anything I have missing?  How to test internally?
    P/S: I am having E2010 SP3 RU2 with Outlook 2010
    Please advise.  Thanks.
    Kelvin Teang

    The root cause is MAPIBlockOutlookRpcHttp = True
    It was working fine after I executed
    Get-Mailbox –Identity
    "username" | Set-CASMailbox -MAPIBlockOutlookRpcHttp:$False
    Kelvin Teang

  • Access Restriction on EA3500 does not work.

    I tested this with my laptop by setting its access restriction/parental control to always not access the internet. But still my laptop can still search through wikipedia. Is this because of the router firmware? By the way I'm using the latest Connect cloud firmware. Thanks in advance.

    I believe parental control is not really busted, it's just designed to work only with ipv4. What you can try though is to try the following:
    Make sure that the laptop is only wirelessly connected to the router, because if the laptop was connected both wired and wireless then parental controls will not work since the laptop will be using two adapters.
    Remove the entry under target devices, disable parental controls and save the settings.
    Enable parental controls, add a target device, save the settings
    Try to check if you can access wikipedia or other website because if parental control was working then it should add for a password
    Try also to check the router's status tab if there's an ipv6 ip address because if there is, then parental controls will not work

  • Blocked Senders feature in Outlook 2010 does not work

    I have a specific blocked sender
    [email protected] listed in my Blocked Senders list, but emails from that email
    address still go to my Inbox instead of the Junk E-mail folder. 
    We use Exchange for email, and Outlook 2010 as the client.
    Note: this sender is blocked for a specific sender that he configured through Junk E-mail Options in Outlook 2010, and this sender is not blocked at the server level.
    I only have one account set up in Outlook. 
    What do I need to do to get Blocked Senders / Junk E-mail working in Outlook?
    Thanks,
    Elizabeth

    Hi,
    From your description, I suggest you try to check the total size of blocked sender list. As total size of all lists combined cannot exceed 512K. Once the 512K limit
    is reached, Outlook alerts you and additional addresses aren't saved until you remove some from the list.
    If your issue is caused by the limited size, you can add a new registry key value to the following registry key:
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MSExchangeIS\ParametersSystem\
    Add a new DWORD value of Type Max Extended Rule Size and edit the Value Data, entering the maximum size (in bytes) you want to allow.
    If your issue is not related to limited size, try to keep your junk e-mail filter updated. Each version of Microsoft Outlook that contains a junk e-mail filter receives updates to the data
    file (outlfltr.dat) as part of the Microsoft-wide monthly update released on the second Tuesday of each month. The updated outlfltr.dat is the result of the evaluation of hundreds of thousands of spam messages and constantly increases the filter “catch”
    rate for incoming junk email.
    The recommended way to obtain updates to the Outlook Junk E-mail filter is by turning on the Automatic Updates option in the Windows Security Center.
    If you have done all above but it still not work, try to create a new outlook profile to test this issue.
     Go to Start > Control Panel, click Mail. The title bar of the Mail Setup dialog box contains the name of the current profile. To select a different
    existing profile, click Show Profiles, select the profile name, and then click Properties.
     Click Show Profiles. Choose Prompt for a profile to be used.
     Click Add.
     Type a name for the profile, and then click OK.
     Start Outlook, and choose this new profile.
    Sincerely,
    Harry 

  • Default account setting in Outlook 2010 does not work when composing new messages?

    Hello,
    I am currently using Outlook 2010 (not beta). I have two accounts, a google imap account and a pop3 account.  I have designated my IMAP account as my default account.  As I understand it, this means that when I create a new email,
    it should default to being sent from my IMAP account.  However, whenever I create a new email, it defaults to the account which I am currently viewing in Outlook.  In other words, if I am currently viewing the pop3 inbox, when I compose an email,
    it will default send from that account.  Conversely, when I compose an email while viewing the IMAP inbox, it will default send from that account. 
    Any ideas as to what is going on?  This is rather frustrating because I only rarely send with my pop3 account--only when replying/forwarding email received with that account or other unique situations.  Is there a way to make Outlook be true to
    sending from the default account, without doing something drastic like disabling the secondary account?
    Thanks in advance.
    Rom

    Of course it's a bug.
    Computing Dictionary
    bug definition
    programming 
     An unwanted and unintended property of a program or piece ofhardware, especially one that causes it to malfunction.
    The behaviour itself may be considered a feature by Microsoft, though I disagree, but the fact that one thinks one is specifying a "default" account that is not then used as the default in all cases is clearly a bug.
    It is astonishing to me that in the plethora of options, advanced options and advanced advanced options there is not a checkbox to enable this new behaviour with the default being unchecked.
    Microsoft does it again.

  • Sync with Outlook 2010 does not work

    While it seems to work, showing the normal progess bar in iTunes - taking some time and feels like normal, no data is transferred from or to outlook.
    No difference with Outlook x32 and x64, iTunes is 10.2.2 x64.
    Reinstalled office and iTunes several times, making empty outlook.pst etc. but still i can't get data from the phone to outlook.
    Any ideas would be aprreciated.

    RIM has formally announced that support for Outlook 2010 will be available this month.  I've heard rumors of August 10th but that's not official.  Regardless, a new Desktop Manager will be released very shortly to add support for Outlook 2010 and some other great features.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • How do you get out of guided access if the password does not work

    HOw do i access my phone, if the guided access is on but i dont remember the password?

    Hey BeastStitch,
    You can end a Guided Access session by triple clicking the home button on your iPhone. See this article for reference -
    iOS: About Guided Access - Apple Support
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • Synching contacts with Outlook does not work

    I have a Mac (with the contacts application), an iPhone and an iPad as well as an iCloud account. Synching contacts between all 4 of them works perfectly. However, synching contacts with Outlook 2011 does not work anymore. It used to, then I had some trouble with the synching with the iCloud (due to the fact that I had to change the Apple ID from the one I use for iTunes to the one I use for the Cloud), and since then contacts do not replicate with Outlook anymore. I can deactivate and reactivate the synching in Outlook as much as I want, no change.
    Any ideas? Thanks!

    So it sounds like you have contacts from multiple mail accounts syncing to/from your iPhone.  They will all appear there as long as their respective accounts are checked under contacts/groups(upper left of contact screen).
    As far as contacts created on the iPhone, if you select Outlook as your default account for contacts, all contacts created on the iPhone will sync with Outlook.  I'm assuming your Outlook syncs with an Exchange Server.
    You could connect the iPhone to iTunes and sync all of your contacts to say, a desktop version of Outlook.  You could then import that set of contacts into the Exchange version of Outlook.

  • Sync with Itunes does not work

    Hi,
    I reinstalled latest Itunes completly but still sync with outlook 2007 does not work.
    Itunes says Sync finished, but nothing is synced.
    Here is the log:
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] ===================
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] iTunes.exe begins
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] ===================
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] "C:\Programme\iTunes\iTunes.exe"
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] ALLUSERSPROFILE=C:\Dokumente und Einstellungen\All Users
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] APPDATA=C:\Dokumente und Einstellungen\mispde\Anwendungsdaten
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] asl.log=Destination=file;OnFirstLog=command,environment
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] CIHOLOSCLI=C:\Programme\Seagate Software\Open Olap\
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] CLASSPATH=.;C:\Programme\Java\jre6\lib\ext\QTJava.zip
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] CommonProgramFiles=C:\Programme\Gemeinsame Dateien
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] COMPUTERNAME=MISPDE0
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] ComSpec=C:\WINDOWS\system32\cmd.exe
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] FPNO_HOSTCHECK=NO
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] HARVESTHOME=C:\Programme\CA\AllFusion Harvest Change Manager
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] HOME=C:\Programme\Computer Associates International, inc.\CCC Harvest
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] HOMEDRIVE=C:
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] HOMEPATH=\Dokumente und Einstellungen\mispde
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] LOCALHARVESTHOME=C:\Programme\CA\AllFusion Harvest Change Manager
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] LOGONSERVER=\\ERLCNDC1
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] NewEnvironment1=C:\Programme\Vodafone\Vodafone Mobile Connect\"Optimization Client"
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] NUMBEROFPROCESSORS=2
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] OS=Windows_NT
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] Path=C:\Programme\Gemeinsame Dateien\Apple\Apple Application Support\;C:\Programme\Gemeinsame Dateien\Microsoft Shared\Windows Live;C:\Programme\CA\SharedComponents\PEC\bin;C:\WINDOWS\system32;C:\WINDOWS;C: \WINDOWS\System32\Wbem;C:\Programme\Microsoft SQL Server\80\Tools\Binn\;C:\oracle\ora102\bin;L:\deployment files\runtime;L:\development\client;D:\FOUNDA~1\fnd301\deployment files\runtime;D:\FOUNDA~1\fnd301\development\client;C:\Programme\Samsung\Samsun g PC Studio 3\;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Programme\CA\AllFusion Harvest Change Manager;C:\Programme\QuickTime\QTSystem\;C:\Programme\Gemeinsame Dateien\Microsoft Shared\Windows Live
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.PSC1
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PERL5LIB=C:\oracle\ora102\perl\lib\5.8.3\MSWin32-x86;C:\oracle\ora102\perl\lib\ 5.8.3;C:\oracle\ora102\perl\5.8.3\lib\MSWin32-x86-multi-thread;C:\oracle\ora102\ perl\site\5.8.3;C:\oracle\ora102\perl\site\5.8.3\lib;C:\oracle\ora102\sysman\adm in\scripts
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PROCESSOR_ARCHITECTURE=x86
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PROCESSOR_LEVEL=6
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PROCESSOR_REVISION=0f0b
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] ProgramFiles=C:\Programme
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] QTJAVA=C:\Programme\Java\jre6\lib\ext\QTJava.zip
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] RTARCH=i86_w32
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] RTHOME=C:\Programme\CA\SharedComponents\PEC
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] SESSIONNAME=Console
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] SQLBASE=C:\Oracle\ora102\NETWORK\ADMIN
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] SystemDrive=C:
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] SystemRoot=C:\WINDOWS
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] TEMP=C:\DOKUME~1\mispde\LOKALE~1\Temp
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] TMP=C:\DOKUME~1\mispde\LOKALE~1\Temp
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] TNS_ADMIN=C:\Oracle\ora102\NETWORK\ADMIN
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] USERDNSDOMAIN=CORPNET.IFSWORLD.COM
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] USERDOMAIN=CORPNET
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] USERNAME=mispde
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] USERPROFILE=C:\Dokumente und Einstellungen\mispde
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] VS90COMNTOOLS=C:\Programme\Microsoft Visual Studio 9.0\Common7\Tools\
    [3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] windir=C:\WINDOWS
    [3068 @ Wed Jun 09 10:45:52 2010] [(unknown facility) iTunes.exe] receive_message: Could not receive secure message: -1
    [3068 @ Wed Jun 09 10:45:52 2010] [(unknown facility) iTunes.exe] readthread: Could not receive message
    [7028 @ Wed Jun 09 10:47:00 2010] [_ISDVLog SyncServer.exe] Cancelling all sync plans.
    [7028 @ Wed Jun 09 10:47:00 2010] [_ISDVLog SyncServer.exe] Goodnight, Gracie.
    Please help me!

    *I just spoke with two different senior advisors from Apple one whose name was Matt and the other whose name was Zachary. They both were extremely rude and were not helpful at all. I explained the same exact scenario to them about how I just updated to iTunes 9.1.1 and that now my iPhone will not sync.*
    The ONLY help they could give me was to purchase a plan for either 29.99 or 69.99
    The reason no one from Apple will help us is because this company is based on greed. I am sure they knew about this bug that prevents thousands of users from syncing but I am also sure they assumed that we would pay the 29.99 or 69.99 for them to fix the problem. I honestly feel as though this is a scam to make more profit off of us.
    There is absolutely NOTHING they can do to help they said except for me to purchase one of those two plans they offer. My question is WHY THE **** SHOULD I PAY FOR SOMETHING THAT I AM NOT AT FAULT FOR? It should be there moral duty and responsibility to fix this bug yet because they know they will profit from it they have no intentions on doing so. The only thing I can really suggest is calling Apple and telling them how you feel. The more people who voice there opinions the better (just be prepared for them to tell you the ONLY thing they can do to fix the problem THEY created is by making YOU pay more money to fix it).
    I am extremely disappointed as a loyal Apple customer and this has seriously made me reconsider ever buying another Apple product.
    This company is morally and ethically wrong.

  • Import mail function does not work for Outlook Express

    working on a windows 8.1 laptop, trying to import emails from a Outlook Express directory that was moved to the new PC. Latest Thunderbird is running and the import starts and then very quickly finishes without importing anything.

    Thunderbird import does not work on my XP machine either, I already tried it. Do you mean that outlook Express has to be running at the time of import?
    I did migrate the mail folder into Windows live email, so I have access to the email but only as a kludgy 2 email solution.
    Thunderbird does not recognize Live Mail, so that was not helpful.
    I think the import broke in some previous release and has not been tested lately.

  • I am trying to allow guests on windows to connect to shares on my Lion server but it keeps asking for a password for guest. I have allow guest users to access this share enabled but it still does not work.

    I am trying to allow guests on windows to connect to shares on my Lion server but it keeps asking for a password for guest. I have allow guest users to access this share enabled but it still does not work.

    Ditto. Guest accounts shouldn't have a password. No way to enter one in System Prefs...

Maybe you are looking for

  • JBO-33001 bc4j.xcfg missing with Jdev 9.0.5.1 embedded OC4J

    I've got an application that I've been trying to migrate from Jdev 10g Preview (9.0.5) to Production (9.0.5.1) for a week now. The steps I've had to follow so far are: 1) Install Jdev 9.0.5.1 2) Run it and allow all workspaces/settings to be migrated

  • Spotify won't open and I can't uninstall or reinstall

    When I try to open Spotify nothing happens. Not even an error message or something. The same when I try to uninstall it. Just nothing happens.. When I try to reinstall it, it says 'installing spotify'. And again boom, nothing happens afterwards.  Can

  • Download error code 49

    download error code 49

  • Exchange rate conversion po

    Dear all, In PO I want to maintain the exchange rate in USD at header level and it should display in INR after multiplying with the quantity and converting from USD at item level in Condition tab. regards, Madhu.

  • BB Error while sync with outlook

    Hi- Appreciate if you guys can help me in finding a solution! I am getting the following error while syncing with OutLook " error record with specific id error (FF1E892B) not found" I am using BB Tourch 9800! Rgds.