Access to rsa1 in many clients

Hello gurus,
Can i create in an instance bw, several clients with access to the transaction rsa1.
I ask this because in rsadmina table (table intermandant), the field bwmandt is individual.
When I connect to another mandant (exemple 810) and I test the transaction rsa1, i have the message "You can only work in client 800"
Thank for you answers.
Mathieu

Check OSS Note 116811 and 116432.
I think you have to create a client copy.
Check out this thread
[You can only work in client 000, Message no. BRAIN009;

Similar Messages

MS ACCESS EXCEPTION TOO MANY CLIENT TASKS

hi all
i am developing an application in jsp for calll center users.
there are 4 types of users who can interact with the appl
in that 100 users of one type are interacting with it.
i am using MS ACCESS for the database connection.
it is working well when 10 users simultaneously logs in
but when users increases its capacity degrades and it throws an exception TOO MANY CLIENT TASKS
i have surfed through net and diffrent forums in that the soln is to switch to Mysql or SQL SERVER
i had talked to the PM
he needs in MS ACCESS itself
i am using tomcat version 5 jdk 1.5

LOVECODING wrote:
hi all
i am developing an application in jsp for calll center users.
there are 4 types of users who can interact with the appl
in that 100 users of one type are interacting with it.
i am using MS ACCESS for the database connection.
it is working well when 10 users simultaneously logs in
but when users increases its capacity degrades and it throws an exception TOO MANY CLIENT TASKS
i have surfed through net and diffrent forums in that the soln is to switch to Mysql or SQL SERVER
i had talked to the PM
he needs in MS ACCESS itselfSounds like your PM is screwed.
i am using tomcat version 5 jdk 1.5Irrelevant.
%

DFS network drive giving error to many clients of Windows 7 and 8.1 after accessing from run

Hi,
My network drive (DFS) is giving below error after upgrade OS from windows 2008 to 2012. On many clients of windows 7 and 8.1 we are able to resolve
by rebooting the system or by net use * /d command. But many user still getting error after accessing from mapped drive as well as from RUN command.
some area stupid thing happening, after accessing from RUN like \\networkdrive then it will open successfully and show all the shared folder. When we
click on particular shared folder it gives below error message and some works perfectly fine. Even though that person have rights on both the shared folder.
"""""check to make sure that the disk is properly inserted, or that you are connected to the internet or your network, and then
try again. If it still cannot be located, the information might have been moved to a different location. """"
Kindly suggest what should I do now?
Inder Johar

Hi Inder Johar,
Please check if clients could connect to \\domain\dfsroot and UNC path. You could refer to the article below to troubleshoot the issue:
DFS mapping error: Refers to a location that is unavailable
http://jthys.wordpress.com/2013/02/20/dfs-mapping-error-refers-to-a-location-that-is-unavailable/
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
It’s simple enough to use a tool like ROBOCOPY or the File Server Migration Tool (FSMT) to copy your previous created folders over to the new name space
\\networkdrive.
Robocopy
http://technet.microsoft.com/en-us/library/cc733145.aspx
Microsoft File Server Migration Toolkit 1.2
http://www.microsoft.com/en-us/download/details.aspx?DisplayLang=en&id=10268
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How many clients support access points 1602, 2602, 3602?

Hi! How many clients support access point 1602, 2602, 3602. I have found for example that the 1602 supports 32 ClientLink clients and max 128 clients, APs 2602, 3602 supports 128 ClientLink clients and max 200 clients. But is it really? And can we say for example that the AP 2602 will withstand max 200 clients?

The reason the answer varies so much, is because there are so many variables (this is also why the value ranges so much from one manufacture to the next). When determining the answer you are looking for you need to consider the following factors and likely more:
AP model and the features it supports
single, dual, or tri radio AP
20, 40, or 80Mhz wide channels
Device type (b/g, b/g/n, a/b/g/n, a/b/g/n/ac, spatial stream support, and channel width support)
Security/QOS method(s) employed
Average distance from the AP
Obstructions between devices and radios
Number of competing radios for the same channel
Data rates configuration
Rogue detection/mitigation configuration
Surrounding client density not just the area of concern client density
Noise floor levels
Application types/per user network load (is it heavy like YouTube traffic or a drone on the network like Pandora)
Network latency on the switching side - including the internet circuit
Application of per SSID, per user, and or per application rate limiting
The list continues, but I think you get the idea
I have personally seen 80 devices on a 5Ghz radio of a 3500 access point with several other access points and at least 200 other clients in the area and it was working well. That being said I would never design to expect that many on a single radio, but I think it is better said that you can safely design for 20-30 clients per 2.4Ghz radio and 25-40 clients per 5Ghz radio.
The default statement of 20-25 per AP and similar low expectation statements concerning Cisco wireless have been around for many years. It is now 2014. About 65% of clients support 5Ghz, ~9% support AC (already), ~90% support some form of N, and ~0.01% support B only. The landscape of wireless is changing fast making questions like this one have ever changing answers.
I hope this helps :).
John

How many clients(specify in no.) concurrently access Weblogic server

hello
i want to know how many clients can concurrently access a application
server. for example:weblogic server or java webserver.

depends on your budget!!
You can go on increasing the number of clients by adding more WLS instances to a cluster. (and pay more licensing cost per node in the cluster).
You can also increase the number of clients by using expensive hardware. (Hp/Compaq/Sun/Dell) will be more than glad to sell you plenty of high-end stuff.
regards,
Abhishek.

How many clients can be connected to an Access Point

Hi friend,
I want to know how many clients can be connected in Cisco AP 1140.
Best Regard,
Marco.

Hi,
As Stephen mention the best answer is it depends.
What you need to keep in mind is that wireless is halfduplex and a shared medium and due to this the bandwith will go down per client.
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a008009483e.shtml
Q. How many clients can associate to the AP?
A. The AP has the physical capacity to handle 2048 MAC addresses, but, because the AP is a shared medium and acts as a wireless hub, the performance of each user decreases as the number of users increases on an individual AP. Ideally, not more than 24 clients can associate with the AP because the throughput of the AP is reduced with each client that associates to the AP.

RE: Accessing multiple Env from single Client-PC

Look in the "System Management Guide" under connected environments page
72. This will allow services in your primary environment to find
services in your connected environment. However, there is a bug
reported on this feature which is fixed in 2F4 for the HP and H1 for all
other servers. The following is from Forte:
The connected environments bug that was fixed in 2F4 is #24282. The
problem
was in the nodemgr/name server source code and caused the following to
occur:
Service1 is in connected envs A and B.
Client has env A as primary, B as secondary.
Envmgr A dies before the client has ever made a call to Service1.
Afer env A is gone, client makes a call to Service1 which causes Envmgr
B to
seg fault.
You should upgrade your node manager/env manager nodes to 2F4. The 2F2
development and runtime clients are fully compatible with 2F4 servers.
Kal Inman
Andersen Windows
From: Inho Choi[SMTP:[email protected]]
Sent: Monday, April 21, 1997 2:04 AM
To: [email protected]
Subject: Accessing multiple Env from single Client-PC
Hi, All!
Is there anybody has any idea to access multiple environments from
single client-PC? I have to have multiple environments because each
environment resides geographically remote node and network bandwidth,
reliability are not good enough to include all the systems into single
environment.
Using Control Panel for doing this is not easy for those who are not
familiar with Windows. The end-user tend to use just single application
to access all necessary services.
I could consider two option to doing this:
1. Make some DOS batch command file to switch different environment
like, copying back/forward between environment repositories and
set up forte.ini for changing FORTE_NS_ADDRESS. After then, invoke
proper client partition(ftexec).
2. Duplicate necessary services among each environment.
But, these two options have many drawbacks in terms of system
management(option 1), performance(option 2) and others.
Has anybody good idea to implement this? Any suggestion would be
appreciated.
Inho Choi, Daou Tech., Inc.
email: [email protected]
phone: +82-2-3450-4696

Look in the "System Management Guide" under connected environments page
72. This will allow services in your primary environment to find
services in your connected environment. However, there is a bug
reported on this feature which is fixed in 2F4 for the HP and H1 for all
other servers. The following is from Forte:
The connected environments bug that was fixed in 2F4 is #24282. The
problem
was in the nodemgr/name server source code and caused the following to
occur:
Service1 is in connected envs A and B.
Client has env A as primary, B as secondary.
Envmgr A dies before the client has ever made a call to Service1.
Afer env A is gone, client makes a call to Service1 which causes Envmgr
B to
seg fault.
You should upgrade your node manager/env manager nodes to 2F4. The 2F2
development and runtime clients are fully compatible with 2F4 servers.
Kal Inman
Andersen Windows
From: Inho Choi[SMTP:[email protected]]
Sent: Monday, April 21, 1997 2:04 AM
To: [email protected]
Subject: Accessing multiple Env from single Client-PC
Hi, All!
Is there anybody has any idea to access multiple environments from
single client-PC? I have to have multiple environments because each
environment resides geographically remote node and network bandwidth,
reliability are not good enough to include all the systems into single
environment.
Using Control Panel for doing this is not easy for those who are not
familiar with Windows. The end-user tend to use just single application
to access all necessary services.
I could consider two option to doing this:
1. Make some DOS batch command file to switch different environment
like, copying back/forward between environment repositories and
set up forte.ini for changing FORTE_NS_ADDRESS. After then, invoke
proper client partition(ftexec).
2. Duplicate necessary services among each environment.
But, these two options have many drawbacks in terms of system
management(option 1), performance(option 2) and others.
Has anybody good idea to implement this? Any suggestion would be
appreciated.
Inho Choi, Daou Tech., Inc.
email: [email protected]
phone: +82-2-3450-4696

Accessing multiple Env from single Client-PC

Hi, All!
Is there anybody has any idea to access multiple environments from
single client-PC? I have to have multiple environments because each
environment resides geographically remote node and network bandwidth,
reliability are not good enough to include all the systems into single
environment.
Using Control Panel for doing this is not easy for those who are not
familiar with Windows. The end-user tend to use just single application
to access all necessary services.
I could consider two option to doing this:
1. Make some DOS batch command file to switch different environment
like, copying back/forward between environment repositories and
set up forte.ini for changing FORTE_NS_ADDRESS. After then, invoke
proper client partition(ftexec).
2. Duplicate necessary services among each environment.
But, these two options have many drawbacks in terms of system
management(option 1), performance(option 2) and others.
Has anybody good idea to implement this? Any suggestion would be
appreciated.
Inho Choi, Daou Tech., Inc.
email: [email protected]
phone: +82-2-3450-4696

Hi, All!
Is there anybody has any idea to access multiple environments from
single client-PC? I have to have multiple environments because each
environment resides geographically remote node and network bandwidth,
reliability are not good enough to include all the systems into single
environment.
Using Control Panel for doing this is not easy for those who are not
familiar with Windows. The end-user tend to use just single application
to access all necessary services.
I could consider two option to doing this:
1. Make some DOS batch command file to switch different environment
like, copying back/forward between environment repositories and
set up forte.ini for changing FORTE_NS_ADDRESS. After then, invoke
proper client partition(ftexec).
2. Duplicate necessary services among each environment.
But, these two options have many drawbacks in terms of system
management(option 1), performance(option 2) and others.
Has anybody good idea to implement this? Any suggestion would be
appreciated.
Inho Choi, Daou Tech., Inc.
email: [email protected]
phone: +82-2-3450-4696

How many clients subscribed to shared variable engine

Hi,
I have shared variable engine deployed on RT and want to know how many clients get access to the shared variables. Is it possible? Thanks!
Tom

Theoretically there is no limit for the number of clients (maybe there is a 2^32-1 limit somewhere I don't know about).
However, more clients create more threads and the CPU usage will increase.
So you shouldn't use that much clients or host the SVE at the host computer if possible.
Christian

Can't Solve the "Too Many Clients Tasks" Problem

Hello All ,
I am creating a java desktop application , and i keep getting this error message:
[Microsoft][ODBC Microsoft Access Driver] Too many client tasks.
Any way ,i googled for this error and i found that because i creates many connections with database "more than 10 i think " , and that why i get this error message ..
The problem is that i do not know how to solve it , i tried to close the connections and i still getting the same error
I searched this forum , and someone suggest to close the connections and the statements and the resultset , but still not working
this is the code
public class Database_Mangement {
    private String User_ID;
    private String user_name;
    private String password;
    private Admin_Connection c;
    private Connection conn;
    private Connection uni_conn;
    private ArrayList<Admin_TableEntry> data;
    public Database_Mangement() throws SQLException
      conn = null;
      uni_conn = null;
      conn = DriverManager.getConnection("jdbc:odbc:smart_database");// Connect with database no 1 through ODBC
      uni_conn = DriverManager.getConnection("jdbc:odbc:uni_database");//Connect with database no 2 through ODBC
      data = new ArrayList<Admin_TableEntry>();
     ArrayList<Admin_TableEntry> getInformation(int type)throws SQLException
         Statement stm = null;
         ResultSet getInfo = null;
       try{
         //get User Information
            if(type==1)
                 stm = conn.createStatement();
                String temp;
                temp = "select * from Students";
                getInfo = stm.executeQuery(temp);
            else if(type==2)
                 stm = uni_conn.createStatement();
                String temp;
                temp = "select * from Students";
                getInfo = stm.executeQuery(temp);
             while(getInfo.next())
                  Admin_TableEntry tempclass = new Admin_TableEntry();
                  if(type==1)
                  {tempclass.ID = getInfo.getString("Student_ID");
                   tempclass.Name =getInfo.getString("Student_Name");
                   tempclass.balance=getInfo.getString("Student_Balance");}
                  else if(type==2)
                      tempclass.ID =getInfo.getString("Student_ID");
                      tempclass.Name = getInfo.getString("First_Name");
                      tempclass.Last_Name =getInfo.getString("Last_Name");
                      tempclass.haveaccount=getInfo.getBoolean("Have_SmartCard");
                   data.add(tempclass);
catch(Exception e)
{System.out.println(e.getMessage();}
finally
     conn.close();
     uni_conn.close();
    stm.close();
//    getInfo.close(); Please note that i get an error message when i try to close the ResultSet
//and this is the error message
// Exception in thread "main" java.sql.SQLException: ResultSet is closed
               return data;
}and thank you for your time..

Thanks , but it only solved the ResultSet.close() problem ,
i am still getting the Too Many Clients error
and i am closing every connection i created after the end of every function .
i think i will switch to SQl server 2008 ... Hope it will be better

Can I find out how many clients are connected to a server process?

Hi, I am hoping I can find out how many clients are connected to a server process. This could be either a programmatic lookout number, a number in a log file etc.
By the way, does lookout have any application (not data) logs? I have noticed that occasionally lookout will crash and I cannot find any logs to determine why, what processes were running, who last accessed it etc.
Thanks

Hello,
There's currently no way to acquire this data. I think that'd be a great suggestion for the product. Please submit your feedback to our developers at the following link: http://digital.ni.com/applications/psc.nsf/default?OpenForm&temp1=&node=
Best regards,
Yusuf C
Application Engineer
National Instruments

SQLException :Too many client tasks problem

Hi,
In my Standalone Java Swing application, iam using connections to the MS-Access Database using Connection pooling..Iam initializing around 10 connections. After executing, performing some operations on application, after sometime...i get the SQL Exception Too many client tasks exception..
I have checked my programs..iam closing all my result set and prepared statements..
Where am i going wrong?
Can anybody pls advice me to solve this problem?
Regards,
SRhodes.

remember access has a max number of connection to handle which you are not closing. you close only resultset and statements
ivo

How many client requests cisco AP1252G-E-K9 can handel ???

Hello friends,
just wanted to now how many clients simultaneously associate with Cisco AP 1252G.. right now when I try to connect more thn 25 rest unable to access the AP. Clients (smart phones plus laptops) are using 802.11b/g standard.
Thanks,
Faysal

I am not sure if the feature is available on 5.0. But for 5.1 here is the location:
http://www.cisco.com/en/US/docs/wireless/controller/5.1/configuration/guide/c51ccfg.html#wp1085099
actually version 5 (and 5.0 specifically) is too buggy. It will not be a surprise if what you are having is some kind of a bug.
HTH
Amjad

How many client session at max can a JCO connection support for webdynpro

Hi Everybody,
We have a Java Webdynpro Dc application with ARFC model, it will be accessed by some hundreds of people. So, How to know whether this application wil support that many client sessions. And where to configure the jco's to suppport that many number of client sessions.
Thanks & Regards,
Ravi

Hi Ravi,
Just check this reply similar to your prob:
If you are using Windows. Then you can right click on the properties of My Computer and select properties. Go to advanced Tab-->Environment Variables and then add this CPIC_MAX_CONV paramter. Restart portal after this.
set CPIC_MAX_CONV=500
Further Look at SAP note 314530,316877
regards,

The email address connected to an old itunes account is no longer active. Can't access music i bought many years ago with out it and the old password.

the email address connected to an old itunes account is no longer active. Can't access music i bought many years ago with out it and the old password.

neilfromvancouver wrote:
the email address connected to an old itunes account
Old iTunes account?
You created a new iTunes account instead of updating the old account with new info?'
Contact iTunes support.

Access to rsa1 in many clients

Similar Messages

Maybe you are looking for