Access to the ES Workplace SCM System?
Hello,
I use the HU2 SAP ERP 2005 ECC 600 system for developing different scenarios combining scripting languages and SAP. For further tests, I tryed to logon to the HU8 SAP SCM 5.0 system but my password doesn't work. It doesn't work for the HU5 and HU6 system also.
Do I have to register through another form for an SCM account, or is something else wrong there?
PS:
The password was reseted several times and I tryed to contact the ES Workplace
support team without any success.
Hi,
For me registering at the following page worked:
https://www.sdn.sap.com/irj/sdn/esareg
Best Regards,
Tarun
Similar Messages
-
ESW: how to enable developer access to the ES workplace systems
Hi,
I received the access from ES workplace for ECC . But I dont have any authorization create any object , the role S_DEVELOP is not assigned to me ,
How to get developer access for the ES Workplace systems ( unable to creat new object ) ?
is it like that P users dont have developer access in all systems ?
How to get assign my user ID with the required roles ?
Experts Pls guide me on the same .
Regards
Chinnaiya P
Edited by: chinnaiya pandiyan on Nov 27, 2010 6:01 PMhi,
it requires a userid and password to get authorization for developping object.
i already had these information but i don't know where should i use it to get authorization.
can anyone who already have passed through this problem can guide? -
To get the user account to access the ES Workplace testing system
Hi all,
I submitted a enterprise SOA registration form to get the user account to access the ESW testing system via https://www.sdn.sap.com/irj/sdn/esareg with a partner user.
Any idea how long it could take for me to receive the user account?
Thanks,
KayI am not pretty sure but one of my friend has got it in 3-4 days, and if you apply for a password then it takes 1 or 2 hrs.
-
"An error occurred creating the application.Check file system permission"
Hi There ,
I am facing a problem in creating a webcenter portal webapplication.
I have followed the steps given in Help topics of Jdeveloper,but after performing all the steps i am getting this error
"An error occurred creating the application.Check file system permission". Kindly help me to get through this error.
Regards
VivekHi Vivek,
I hope this is the problem with permission.you Don't have Admin permission to access those folder.
my Suggestion is
1.use Administrator account(on windows) for develop applications(its give full access to the folder from your system). or
2 open your JDeveloper as Administrator. (just right click on JDeveloper from you shortcuts or from programs run as Administrator)
I hope this will be helpful.
Best Regards
Siva Sankar -
SAP ICH in the SCM system is capable of publishing pages in web application
Experts,
We have one critical requirements where in we have to suggest customer that whether SAP ICH in the SCM system is capable of publishing pages in web application or not.
In detail... in our customer land scape SCM is the central planning tool and there are two type of users, one type of users have direct access to SCM system where they can directly do thier demand planning, the second type of users only have access to the web application called "extranet", from which they want to see the published planning guidelines and based on that they also wants to create the demand planning (from the web application - extranet). My question is whether SAP Inventory Collaboration Hub will do for this requirement? Do we need an Enterprise Portal to facilitate this functionality? Please advice. Very impartant and critical for delivery by tomorrow. Thanks in advance.
Warm Regards,
KrishnanHi Krishnan,
From your query I understood that a set of DP users access the system from external location over web.
SAP gives a solution ,using BSP web pages, to expose the SAP screens as its seen through the SAPGui's. They look similar to the standard only difference is it will be embedded in the browser. Unfortunately SAP was recommending this technology, they has plans to retire this technology as the Portal would suffice this requirement. So to answer your query the portal is a viable solution to your requirement.
ICH cannot help you because it does not give the functionality of DP, instead its a application for collaboration between the entities (manufacturer & supplier or customer). -
Your account does not have access to the forums system.
Greetings, My name is Jeff, I'm from Netwrix Corporation, which is a Microsoft partner. I have a problem with accessing Microsoft TechNet forum. After signing-in to my account: [email protected], I go to TechNet
forum, and get a message that: "Your account does not have access to the forums system." And also I've noticed that all my posts were deleted from TechNet forums. Can moderators tell me why did that happen? Why didn't I receive any warning
about my account suspension?
I've already submitted 2 tickets to MSDN Site Feedback Inquiry but didn't receive any answer.
I've called Microsoft TechNet at 800-344-2121 and Professional
Support team at 1-800-936-5800. But everybody send me to the MSDN Site Feedback Inquiry from which I didn't get any answer.
Anybody can help me with my problem?Hi,
Is this the profile you're referencing?
http://social.technet.microsoft.com/Profile/netwrix
It doesn't appear to be banned, but you're definitely right about there being no activity listed.
I'd suggest contacting the forums team directly by sending an email to fissues (at) microsoft [dot] com. The admins do monitor this forum, so you'll probably get a response here as well.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing) -
I have an icloud account which I can access via the web but when I go to systems preferences and click on the icloud it sends me to the mobileme closed site?? How do I get it to go to my icloud log in?
You're saying that when you click on the iCloud preference pane button it sends you to the defunct MMe
rather than giving you this?
Is your profile up to date, i.e. are your running 10.7.5? Make sure you click on the iCloud button and not the MMe button.
OT -
File system task error ; Access to the path " " is denied
HI All,
I have created a simple package to copy xml files from multiple source folders to destination folder.
Folder names and paths are stored in a sql table. I use execute sql taks to get folder and path names. set the restult set to full result set in the execute sql task.
Then for each loop is used to loop through each file name. File system taks is inside the for each loop. Destination vairable and source varable were created and assigned them inthe file system task.
But I am getting an error message.
[File System Task] Error: An error occurred with the following error message: "Access to the path '\\cor\Groups\DN\Share2\Servicing \RESPONSE_FILES\Services' is denied.".
But I am able to do this if i design the package to move just one file. i.e without using variables. I get the error message only when I use variables.
Can anyone tell me how to fix this please?
Thanks
shamenHow to give the access please.
Ramu Gade
Login using a sysadmin account
Go to the folder right click security and you've the option to add new account. You should give account write access if you want to copy files to folder.
see
http://technet.microsoft.com/en-in/library/bb456988.aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page -
I have read some of the other posts for people that got this error, but none seem to apply to me.
My program has been working for weeks. I made some minor changes, and started getting the error (full details below).
I did a TFS "undo pending changes" and still getting the same error, even after logging off. The one odd thing is that I did change my Windows password this week. The connection string is using a SQL user id and password that has no issues.
I'm an Admin own my own box (running WIn XP SP3). I even tried "Run as Admin" on Visual Studio.
I'm doing a Debug-Start, running a Console-Test-Program that calls a WCF service, which on local machine is hosted by "ASP.NET Development Server".
We have two other developers, one has the same problem, one does not. In theory, we have all done "get latest" and are running the same code.
The SQL Connection is related to a trace database; we are using this library http://ukadcdiagnostics.codeplex.com which has worked fine for months.
When I do "Start Run" in Visual Studio, I get this error:
{"The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. "}
with InnerException: {"The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception."}
and it has InnerException: {"Requested registry access is not allowed. "}
Outmost StackTrace:
at System.Data.SqlClient.SqlConnection..ctor()
at System.Data.SqlClient.SqlConnection..ctor(String connectionString)
at FRB.Diagnostics.Listeners.SqlDataAccessCommand..ctor(String connectionString, String commandText, CommandType commandType)
at FRB.Diagnostics.Listeners.SqlDataAccessAdapter.CreateCommand()
at FRB.Diagnostics.Listeners.SqlTraceListener.TraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
at FRB.Diagnostics.Listeners.CustomTraceListener.FilterTraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
at FRB.Diagnostics.Listeners.CustomTraceListener.TraceEvent(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String format, Object[] args)
at System.Diagnostics.TraceSource.TraceEvent(TraceEventType eventType, Int32 id, String format, Object[] args)
at System.Diagnostics.TraceSource.TraceInformation(String message)
at FRB.EC.AdminService.AdminService.TestHelloWorldWithTrace(String name)
at SyncInvokeTestHelloWorldWithTrace(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
Second Inner StackTrace:
at System.Data.SqlClient.SqlConnection..cctor()
Third Inner StackTrace:
at System.Data.SqlClient.SqlConnectionFactory..cctor()
When I do "Run as Admin", I get this error:
{"Could not load file or assembly 'FRB.EFDataAccess, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Access is denied. "}
Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at FRB.EC.AdminService.ConsoleTester.svcRef.IAdminService.GetDispositionStatusTypeList()
at FRB.EC.AdminService.ConsoleTester.svcRef.AdminServiceClient.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\Service References\svcRef\Reference.cs:line 2459
at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 565
at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.ExecuteNewRelease103QueryMethods() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 189
at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.Main(String[] args) in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 76
at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
I am also posting the web.config/app.config, but I would rather not focus on that since there were absolutely no changes to it between the time it was working and the time it began failing.
Client app.config
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<connectionStrings>
</connectionStrings>
<system.serviceModel>
<behaviors>
<serviceBehaviors>
<behavior name="ServiceBehavior">
<serviceMetadata httpGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="false"/>
<serviceAuthorization impersonateCallerForAllOperations="true"/>
</behavior>
</serviceBehaviors>
<endpointBehaviors>
<behavior name="FRB.AllowImpersonate">
<clientCredentials>
<windows allowedImpersonationLevel="Impersonation"/>
</clientCredentials>
</behavior>
</endpointBehaviors>
</behaviors>
<bindings>
<wsHttpBinding>
<binding name="WSHttpBinding_IAdminService" closeTimeout="00:01:00"
openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"
bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard"
maxBufferPoolSize="524288" maxReceivedMessageSize="5565536"
messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true"
allowCookies="false">
<readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384"
maxBytesPerRead="4096" maxNameTableCharCount="16384" />
<reliableSession ordered="true" inactivityTimeout="00:10:00"
enabled="false" />
<security mode="Message">
<transport clientCredentialType="Windows" proxyCredentialType="None"
realm="" />
<message clientCredentialType="Windows" negotiateServiceCredential="true"
algorithmSuite="Default" />
</security>
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost:3588/AdminService.svc" binding="wsHttpBinding"
bindingConfiguration="WSHttpBinding_IAdminService" contract="svcRef.IAdminService"
name="WSHttpBinding_IAdminService">
<identity>
<dns value="localhost" />
</identity>
</endpoint>
</client>
</system.serviceModel>
</configuration>
web.config of WCF service:
<?xml version="1.0"?>
<configuration>
<configSections>
<section name="FRB.Diagnostics" type="FRB.Diagnostics.Configuration.UkadcDiagnosticsSection, FRB.Diagnostics"/>
</configSections>
<appSettings>
<!-- whatever goes here -->
</appSettings>
<!-- connection string section -->
<connectionStrings>
<add name="log" connectionString="Data Source=myserver;Initial Catalog=ECWCFLOG_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
<add name="DBConn" connectionString="Data Source=myserver;Initial Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
<add name="EagleConnectEntities" connectionString="metadata=res://*/EagleConnect.csdl|res://*/EagleConnect.ssdl|res://*/EagleConnect.msl;provider=System.Data.SqlClient;provider connection string="Data Source=myserver;Initial
Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True"" providerName="System.Data.EntityClient"/>
</connectionStrings>
<!-- FRB.Diagnostics logging section -->
<FRB.Diagnostics>
<sqlTraceListeners>
<sqlTraceListener name="sqlTraceListenerSettings"
connectionStringName="log"
commandText="INSERT INTO LogStore VALUES(@Source, @ActivityId, @ProcessId, @ThreadId, @EventType, @Message, @Timestamp)"
commandType="Text">
<parameters>
<parameter name="@Source" propertyToken="{Source}"/>
<parameter name="@ActivityId" propertyToken="{ActivityId}"/>
<parameter name="@ProcessId" propertyToken="{ProcessId}"/>
<parameter name="@ThreadId" propertyToken="{ThreadId}"/>
<parameter name="@EventType" propertyToken="{EventType}" callToString="true"/>
<parameter name="@Message" propertyToken="{Message}"/>
<parameter name="@Timestamp" propertyToken="{DateTime}"/>
<!-- <parameter name="@UserId" propertyToken="{WindowsIdentity}"/> -->
</parameters>
</sqlTraceListener>
</sqlTraceListeners>
<smtpTraceListeners>
<smtpTraceListener name="smtpTraceListenerSettings"
host="vssmtp"
port="25"
from="[email protected]"
to="[email protected]"
subject="AdminService Logging Event: {EventType}, {MachineName}"
body="{Message}
=======
Process={ProcessId},
Thread={ThreadId},
ActivityId={ActivityId}"/>
</smtpTraceListeners>
</FRB.Diagnostics>
<!-- System.Diagnostics logging section -->
<system.diagnostics>
<sources>
<source name="FRB.EC.AdminService" switchValue="All">
<listeners>
<clear/>
<add name="ods"/>
<add name="smtp"/>
<add name="sql"/>
</listeners>
</source>
<source name="System.ServiceModel" switchValue="Off" propagateActivity="true">
<listeners>
<add name="ignored" type="System.Diagnostics.ConsoleTraceListener"/>
</listeners>
</source>
</sources>
<sharedListeners>
<!-- OutputDebugStringTraceListener -->
<add name="ods"
type="FRB.Diagnostics.Listeners.OutputDebugStringTraceListener, FRB.Diagnostics"
initializeData="{ActivityId}|{EventType}: {Message} - {DateTime}, Process={ProcessId}, Thread={ThreadId}"/>
<!-- SqlTraceListener -->
<add name="sql"
type="FRB.Diagnostics.Listeners.SqlTraceListener, FRB.Diagnostics"
initializeData="sqlTraceListenerSettings"
traceOutputOptions="Timestamp"/>
<!-- SmtpTraceListener -->
<add name="smtp"
type="FRB.Diagnostics.Listeners.SmtpTraceListener, FRB.Diagnostics"
initializeData="smtpTraceListenerSettings">
<filter type="System.Diagnostics.EventTypeFilter"
initializeData="Error"/>
</add>
</sharedListeners>
<trace autoflush="true"/>
</system.diagnostics>
<system.web>
<compilation debug="true" targetFramework="4.0">
</compilation>
<roleManager enabled="true" defaultProvider="AspNetWindowsTokenRoleProvider"/>
</system.web>
<system.serviceModel>
<services>
<service name="FRB.EC.AdminService.AdminService"
behaviorConfiguration="FRB.EC.AdminService.AdminServiceBehavior">
<!-- Service Endpoints -->
<endpoint address="" binding="wsHttpBinding"
bindingConfiguration="wsHttpEndpointBinding"
contract="FRB.EC.AdminService.IAdminService">
<!--
Upon deployment, the following identity element should be removed or replaced to reflect the
identity under which the deployed service runs.
If removed, WCF will infer an appropriate identity automatically.
-->
<identity>
<dns value="localhost"/>
</identity>
</endpoint>
<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>
</service>
</services>
<bindings>
<wsHttpBinding>
<binding name="wsHttpEndpointBinding"
maxBufferPoolSize="2147483647"
maxReceivedMessageSize="500000000">
<readerQuotas maxDepth="2147483647"
maxStringContentLength="2147483647"
maxArrayLength="2147483647"
maxBytesPerRead="2147483647"
maxNameTableCharCount="2147483647"/>
<security>
<message clientCredentialType="Windows"/>
</security>
</binding>
</wsHttpBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior name="FRB.EC.AdminService.AdminServiceBehavior">
<!-- To avoid disclosing metadata information, set the value below to false and
remove the metadata endpoint above before deployment -->
<serviceMetadata httpGetEnabled="true"/>
<!-- To receive exception details in faults for debugging purposes, set the value below to true.
Set to false before deployment to avoid disclosing exception information -->
<serviceDebug includeExceptionDetailInFaults="true"/>
<serviceCredentials>
</serviceCredentials>
<!--<serviceAuthorization principalPermissionMode="UseAspNetRoles"
roleProviderName="AspNetWindowsTokenRoleProvider"/>-->
<serviceAuthorization principalPermissionMode="UseWindowsGroups"
impersonateCallerForAllOperations="true"/>
</behavior>
<behavior name="FRB.EC.AdminService.IAdminServiceTransportBehavior">
<!-- To avoid disclosing metadata information, set the value below to false and
remove the metadata endpoint above before deployment -->
<serviceMetadata httpGetEnabled="true"/>
<!-- To receive exception details in faults for debugging purposes, set the value below to true.
Set to false before deployment to avoid disclosing exception information -->
<serviceDebug includeExceptionDetailInFaults="false"/>
<serviceCredentials>
<clientCertificate>
<authentication certificateValidationMode="PeerTrust"/>
<!--<authentication certificateValidationMode="Custom" customCertificateValidatorType="DataFactionServices.FRBX509CertificateValidator"/>-->
</clientCertificate>
<serviceCertificate findValue="WCfServer"
storeLocation="LocalMachine"
storeName="My" x509FindType="FindBySubjectName"/>
</serviceCredentials>
</behavior>
</serviceBehaviors>
</behaviors>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true"/>
</system.serviceModel>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true"/>
</system.webServer>
</configuration>
Thanks for any help.
NealI think I found it... this is sure a strange error for what is really happening.
Apparently it had happened to me before, and fortuantely, I actually added the following comment:
// Above is related to the WCFLOG SQL Diagnostics Trace
// If you get error here an inner exception "requested registry access is not allowed"
// inside exception "type initializer for System.Data.SqlClient.SqlConnection"
// then make sure you have impersonation enabled in your client.
// See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
Now I think I will do a try catch and spit out the same text.
Still testing to assure that this really was the issue.
<endpointBehaviors>
<behavior name="FRB.AllowImpersonate ">
<clientCredentials>
<windows allowedImpersonationLevel="Impersonation"/>
</clientCredentials>
</behavior>
</endpointBehaviors>
The line below in BOLD below is what somehow seemed to disappear from my app.config - probably due to a TFS human error - still checking that also:
<client>
<endpoint address="http://localhost:4998/AdminService.svc"
behaviorConfiguration="FRB.AllowImpersonate"
binding="wsHttpBinding"
bindingConfiguration="WSHttpBinding_IAdminService"
contract="svcRef.IAdminService"
name="WSHttpBinding_IAdminService">
<identity>
<dns value="localhost" />
</identity>
</endpoint>
</client>
Here's how I "idiot-proofed" this error for now, to give an error that actually at least points to a solution:
public SqlDataAccessCommand(string connectionString, string commandText, CommandType commandType)
try
_connection = new SqlConnection(connectionString);
// Above is related to the WCFLOG SQL Diagnostics Trace
// If you get error here an inner exception "requested registry access is not allowed"
// inside exception "type initializer for System.Data.SqlClient.SqlConnection"
// then make sure you have impersonation enabled in your client.
// See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
catch (Exception ex)
if (ex.ToString().Contains("The type initializer for"))
throw new System.ApplicationException(@"
Your client app <endpoint> must be cofigured have a
'behaviorConfiguration' attribute like this:
behaviorConfiguration='FRB.AllowImpersonate'
that points back to a behavior that has this syntax:
<behavior name='FRB.AllowImpersonate'>
<clientCredentials>
<windows allowedImpersonationLevel='Impersonation'/>
</clientCredentials>
</behavior>
", ex);
else
throw ex;
_command = _connection.CreateCommand();
_command.CommandText = commandText;
_command.CommandType = commandType;
// TODO _command.CommandTimeout = ;
Neal -
Access to the JAVA Stack of PI system
Hi,
User want access to JAVA Stack in PI System.
Below is the message while user try to logon to Integration Builder in SAP NetWeaver for the PI Portal:
"No authorization for this action".
Kindly let us know how access to JAVA stack is possible?
Thanks and Regards,
Sachin.Hi,
At present i would like to go for Alert configuration as Raja sekhar suggested. I reffered number of blogs contains how to get alert mail (through Alrtcatdef and scot ) but i need how to get Alert as SMS. where can i specify the mobile numbers and how to do it. Please do the needful.
Regards,
srihari. -
Java daemon on boot: "This user is not allowed access to the window system right now."
The daemon is located in /Library/LaunchDaemons/ and launches successfully on most occasions. However, it sometimes fails to start with this error:
Nov 17 20:36:24 server.local java[28972]: This user is not allowed access to the window system right now.
Nov 17 20:36:24 server com.apple.launchd[1] (net.java.server): Throttling respawn: Will start in 10 seconds
I have the server command running as a background daemon using its "nogui" option (the developers claim to have written it to not display a gui). However, it seems that somewhere along the line, Java is trying to display something. As the daemon is running before users log in, it gives this error. Once a user is logged in to the system, it runs fine; however, logging in a user to run the server is not an option. It needs to run on boot.
Any ideas for how to solve this? I'm going to contact the developers to see if it may be something they can fix, but I want to be able to force the issue in case the problem ever occurs in the future.Irrespective of any claims by the developer, this certainly appears to be a test case that shows that the tool is not working as expected, and that the application has a bug. This test case would be better if there was some evidence around why only some of the startups fail, but in general this will involve what's been suggested earlier: "Contact the application developer."
As some general background on what's involved, see daemons and agents and related; processes that are not allowed to connect to the GUI for reasons of security.
I'd also suggest testing your DNS, as seeing "server.local" can imply local DNS configuration errors. Launch Terminal.app from Applications > Utilities and issue the following harmless diagnostic command and see if it reports no changes, or if it detects network or DNS errors:
sudo changeip -checkhostname
If this is OS X Server and a NAT'd network, you do not want to reference any DNS servers located off of your NAT'd network.
Why DNS? Because DNS errors can cause only some operations to fail, particularly if there's more than one DNS server selected (and where some subset of the DNS servers are malfunctioning or misconfigured). -
suspicious Maleware / Trojan.
== This happened ==
Every time Firefox opened
== I tried to access a websiteHello "Morbus",
Thank you for your quick and informative reply. First I would like to provide more information on this attempted Malware/Trojan. I have copied the full addresses for you and/or anyone who may have interest. It follows below.
28.06.2010 07:38:00 Network Shield: blocked access to malicious site 楴祣湯椮⽮瑮⽥畫硥e [ C:\program files\Mozilla Firefox\Firefox.exe ( 5436 ) ]
28.06.2010 08:14:44 Network Shield: blocked access to malicious site 楴祣湯椮⽮瑮⽥畫硥e [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 4476 ) ]
28.06.2010 13:32:53 Network Shield: blocked access to malicious site 楴祣湯椮⽮瑮⽥畫硥e [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 1988 ) ]
28.06.2010 17:51:53 Network Shield: blocked access to malicious site 楴祣湯椮⽮瑮⽥畫硥e [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 5400 ) ]
29.06.2010 13:31:03 Network Shield: blocked access to malicious site ticyon.in/nte/kuz.exe [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 2444 ) ]
29.06.2010 23:15:14 Network Shield: blocked access to malicious site ticyon.in/nte/kuz.exe [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 480 ) ]
30.06.2010 09:36:22 Network Shield: blocked access to malicious site ticyon.in/nte/kuz.exe/wHd0e51a5bV03006f36002Ra38dbe4f108T9ccfa9f8Q000002fe901801F0035010aJ14000601L656e2d55530000000000 [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 5164 ) ]
30.06.2010 22:31:52 Network Shield: blocked access to malicious site ticyon.in/nte/kuz.exe/wHd0e51a5bV03006f36002Ra38dbe4f108T9ccfa9f8Q000002fe901801F0035010aJ14000601L656e2d55530000000000 [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 3600 ) ]
I had failed to mention in my previous comments that each time the attempted attacks took place, a blank Adobe PDF page appeared. As you suggested, I disabled the Adobe add-on and have had no further attacks. I am extremely dilligent in keeping my SuperAntiSpyware Pro, AvastAntiVirus 5.0, ThreatFire, Vista Firewall Control, Malewarebytes and Windows Defender up to date. However, after any attack I always run these in safe mode just as a precaution. I had suspected the Adobe drop-in may have been the culprit because of the page that appeared and your suggested fix has in fact fixed it!
Thank you again for your unselfish time in coming to my rescue. "Deaf Dave"
From: [email protected]
Date: 7/1/2010 12:53:40 PM
To: [email protected]
Subject: Reply notification: when clicking websites my Avast 5.0 antivirus notifies me that a malicious URL is trying to access my system or that a Trojan has been prevented from access. The attempted Malware/Trojan is always from the same address:[ticon.in/nte/kuz/.exe/xhdoe515bvo38d
"Morbus" has posted a reply to a thread you're watching.
You can view the thread and reply at the following URL:
https://support.mozilla.com/en-US/forum/1/714170#threadId714337
Message:
Hello Deaf Dave.
It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
Also, it's possible that your system is infected with malware. To scan for malware, install, update and run these programs ''in this order''. They are all free for personal use, but some have limited functionality in their "free mode", but the features you'll miss are not really needed to find and remove the problem you have. Remember that ''not all programs detect the same malware''!
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php malwarebytes.org/mbam.php]
SuperAntispyware - [http://www.superantispyware.com/ superantispyware.com]
AdAware - [http://www.lavasoftusa.com/software/adaware/ lavasoftusa.com/software/adaware]
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html safer-networking.org/en/index.html]
Windows Defender - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx microsoft.com/windows/products/winfamily/defender/default.mspx]
Dr. Web Cureit - [http://www.freedrweb.com/cureit/ freedrweb.com/cureit]
If these don't find it or can't clear it, please tell me and I'll provide you with further assistance.
Did this response solve your problem with Firefox?
Yes, this solved my problem (click here):
https://support.mozilla.com/tiki-feedback.php?id=714170&hash=6d5f163b3092b464aa15d04188b5cca2&type=forum_topic&feedback=Firefox%20Support%20Forum&commentId=714337
No, this did not solve my problem (click here):
https://support.mozilla.com/en-US/forum/1/714170?hash=6d5f163b3092b464aa15d04188b5cca2#form
If you no longer wish to receive notifications for this thread,
visit the following URL to cancel your subscription:
https://support.mozilla.com/tiki-cancel_watch.php?section=forum&hash=6d5f163b3092b464aa15d04188b5cca2 -
Exception due to UWL trying to access all the systems in the landscape.
Hello everyone!
We have a problem with UWL in all our environments.
When a user is trying to see his tasks, an error appears at the top of the screen at the end of the update: u201CAn error occurred while trying to connect to the provideru201D.
This happens because the UWL is trying to establish a connection with all the backend systems in the landscape including the ones that the end user has no username in.
Because of that, the SSO fails to this backend system & we get this error.
My question is: how do I limit UWL to access only the relevant systems?
Thanks,
Yoav ZilbermanHi Yoav ,
Its very easy to solve your problem.
First i would like to explain the your scenario .. so you can get the correct idea of what you need to
do for your problem.
Suppose there are
2 user called UA and UB
2 Roles RA and RB
2 Back-end System SA and SB
Let SA is accessing R3 system and SB is accessing SRM System.
User UA is having SA access and User UB is having SB system access.
Role RA is having iviews for SA and Role RB is having iviews for SB Syetem
Role RA assigned to user UA and Role RB is assigned to user UB
So in your case when user UA is seeing his UWL he will be getting error for SB system and
UB will be getting erorr for SA system.
I hope you are getting same error ... explained above ..........???????
Now Solution
Now to solve the issue you need to edit the Registered Universal Worklist Systems .
Go to the Universal Worklist - Administration from System Administration->System Configuration
Now select your desired registered System Alias and click edit button
now you will see below mentioned attributes
System Alias: *
Connector Type: *
Web Dynpro Launch System:
User Roles:
System Configuration Groups:
Delta Pull Channel Refresh Period (in Seconds):
Delta Pull Channel Snapshot Refresh Period (in Minutes):
In above mentioned Attributes ... go to User Roles: and for SA Alias in User Roles type RA
and for SB Alias in User Roles type RB.
That's all.... your problem solved .. just clear the cache and test.
How It works
From Above case SA Alias will run only for users/groups those who are having RA role same as
SB Alias will run only for those who are having RB role.
So in your case when user UA will log-in only SA will get activated not SB so user will not see any errors
for SB System.
Regards,
Piyush -
I have a Mac OS X version 10.5.8 and recently got an Iphone4. I can not access Icloud from my computer. Is there any software, new operating system or anything I can purchase that will allow me access to the cloud?
Upgrading to Snow Leopard, Lion, or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
You can purchase Snow Leopard by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The price is $19.99 plus tax. You will receive physical media - DVD - by mail.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer)
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
3. MacBook Pro (Mid/Late 2007 or newer)
4. MacBook Air (Late 2008 or newer)
5. Mac mini (Early 2009 or newer)
6. Mac Pro (Early 2008 or newer)
7. Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
Am I eligible for the free upgrade?
See Apple - Free OS X Mountain Lion upgrade Program.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.
Model Eligibility for Snow Leopard and Lion.
Snow Leopard General requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider; fees may
apply.
6. Some features require Apple’s MobileMe service; fees and terms apply.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or
Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
I don't have the up to date system requirements to run iCloud on my mac but would still like to access my email on my mac. I think I need to update my settings, but am not sure what to do. Can anyone help. thanks
Welcome to the Apple Community.
If you haven't done so already you need to migrate your mail account to iCloud first and do so IMMEDIATELY at the website Move
Then
Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
Entering iCloud email settings manually in Snow Leopard or Leopard
Entering iCloud email settings manually in Tiger
Maybe you are looking for
-
The version of GreaseMonkey that I need to operate the scripts I was using is the latest version (0.9.1) and it is not working correctly with the Norton 360.
-
Program exit to change workitem text
Hi All, I have a requirement to change work item text at runtime, i am using program exit to change the task contrainer variable which is being used to display work item text. i have written a code in program exit to update container element, but it'
-
can anyone please tell me'; can i use the nokia 6230i mto download songs from the pc to the fone and play them? wot do i need to be able to do this thank you if
-
Does anybody know the best way to eliminate or reduce line chatter caused when an image is digitally moved? For example, newspaper clippings or line art or maps? Thanks!!
-
HTML output on NT and solaris are diffierent for a report
Hi, I have created a report on win2000 and did the deployment on Solaris box. When i call a report from a nt box HTML looks fine but if i call same report from solaris box the font size is changed and also the formatting. This also affects the PDF fo