Access to Time Machine from different computer

I'm giving my old iMac to my wife and setting up a Mini for myself. Since the iMac was a PPC and the Mini is Intel, I did not use migration assistant to transfer my data. I need to access a couple of files from my last Time Machine backup on the iMac before I wiped the iMac drive clean in order to set it up for my wife. The Time Machine files are on a Time Capsule. The problem is that I can't seem to access the backup file from the Mini either via wifi or ethernet. I'm getting a window telling me that the File Vault is turned on and is restricting access to the file.
Any ideas?
Thanks....

jlindh123 wrote:
An additional problem is that the old iMac is already up and running for my wife with all her stuff on it. Going back and doing a complete restore of my files would be out of the question. We're also moving and I have another backup HD if I can just find the box it's packed in. This is a regular HD, not a Time Capsule and I'm hoping that will make things easier.
A little. But if the home folder was encrypted by File Vault when it was backed-up, a complete restore of it is the only way you're going to get any of the contents out.

Similar Messages

How do i use a Time Machine from another computer from Time Capsule with multibackups

Can Iuse a Time Machine from another computer from Time Capsule with multibackups

Not sure what you are asking here.
Time Machine is software on a Mac that is used to backup that Mac to a Time Capsule hard drive.
Are you asking if another Mac can backup to the same Time Capsule that other Macs are already using?
Or, if not....please clarify on exactly what you want to do.

How to access Time Machine from Another Computer?

My daughter's iBook went down and is in the shop for repair and we want to access her Time Machine back up from another computer. Does anyone know if there is any way to do that?

Time Machine won't do it as far as I can tell.
However, you can access the backups through Finder.
Warning - you *do not* want to do anything but copy out files - no deletes, moves, renames, no nuttin... Doing so will screw up the backups for any future Time Machine use!
If the backups are on an external disk, then just navigate to the folder Backups.backupdb/yourMachineName there you will find each backup by date/time with the contents of the system at that time.
If the backups are to a Time Capsule you need to mount the backups - the sparsebundle file - first then examine the folder Backups.backupdb/yourMachineName.
Time Machine does have a 'Browse Other Time Machine Disks' option, but as far a I can exercise it it only looks at other disks with backups for the same machine.
Again _only copy_ out files. Normally one should only use Time Machine, but here you can't - so be cautious.

How do I access time machine from different user account

Hi there.
Last week I had to take my comupter into the local Apple Store because I was having problems with Boot Camp. The genius at the store had to delete everything from my hard drive and reinstall it from my external hard drive. As part of the process she created a "Apple" user account. I now want to restore some files (unrelated to this Boot Camp story) from my time machine archive. However, all the files prior to this Apple Store encounter are red -- and it says I do not have permission to view them. When I click "get info" it says that the "Apple" account has the read/write access to them and the option to unlock them is greyed out. How can I get these files from the archive and get them onto my main user account where they belong? The "Apple" account does not have a password so I think I can easily log on as that account, but I don't know where to go from there.
PS The files in question are iTunes libraries.
Thanks for your help.

Ok, I fixed it. Here's what I did.
I logged into my computer under the Apple account. Then I went into Time Machine. I found my old files under Users-->"my main account". I was able to restore those files to Users-->Shared. Then I was able to log back into "my main account" and retrieve the files from the shared folder. It worked! Hope this helps someone else some time!

Can I access my Time Machine from another mac?

My current mac (an iBook G4, early 2005) has I think died irreparably. I'm waiting to see if it can be repaired but in the meantime I'd like to know if I can plug my Time Machine into another Mac (either a friend's or a family member's, both have 2006 MacBooks) and be able to access my stuff? I read elsewhere in the forum that this was possible if you were setting up a new mac, but I won't be able to buy a new computer for a while and need quite badly to be able to get at my documents.

yes, it's possible. plug it into the other computer. control-click on TM inthe dock and choose" browse other Time Machine disks".

Have a New MBP with Lion preinstalled. Need Snow Leopard instead. Have time machine from old computer running Snow Leopard as well. PLEASE HELP!!

I have a brand new Macbook Pro with Lion preinstalled. I haven't even turned it on yet. I desperately need Snow Leopard because my music software is not Lion compatible yet. I also have a Time Machine backup from my old Macbook that is currently running Snow Leopard 10.6.8. How can I get Snow Leopard on my new Macbook Pro? Also, will Time Machine replace the applications on the new Macbook Pro with the older versions I have in the backup or how exactly does that work? I've been staring at the box for 2 days now worried I won't be able to use any of my software. PLEASE HELP ME!

It depends on the build of your machine; normally, no Mac can ever boot from a system older than what it came with. However, there are exceptions: right around the time the new OS is released, there may be some machines which will be able to run both OS's. Here is some information on software builds:
http://support.apple.com/kb/HT1159
You may have to call Apple to figure out if you can use SL on yours or not.

TS1963 migrating documents in time machine from one computer to a different one

the transfer seemed to work well and I found the files on my new computer but it says i don't have permission to open the files. All the transferred files have a red circle with a line through it. So even though I have the files they're unavailable to me to open.... my question is how to I open them????

To prevent a sync when plugging in the iPod/iPhone - hold down the 'option' and the 'command' keys when plugging in the ipod - key the keys down until the iPod/iPhone is listed under the Devices list in iTunes - this will prevent a sync from taking place and you will be able to change your settings.
Using Migration Assistant would have been an easier option then you could have deleted the stuff you didn't want on the new Mac.
MJ

HT3275 how can i retrieve information from time machine if my computer has less storage capacity? How can I access data that is on my time machine but can not be copied to a computer with less storage capacity? I used to have 180 GB, now I have 128 GB.

how can i retrieve information from time machine if my computer has less storage capacity? How can I access data that is on my time machine but can not be copied to a computer with less storage capacity? I used to have 180 GB, now I have 128 GB.

Plug an external drive into the computer and use that to expand data onto.
http://pondini.org/TM/16.html

I downloaded a program and it never shiowed up in the download box. I can't find it anywhere on my computer. I tried it a few different times and from different sites but still nothing. What can I try next?

I downloaded a program several times and from different download sites. It never showed up in the download box but it said all downloads have completed. I searched for it anywhere on my computer but the search produced no results.

I suppose there is a possibility that you have security software than may be blocking quarantining or even deleting the downloaded file.
Normally if Firefox says in the download manager that the file is downloaded then it is on your computer, and if you right click you should get the option to open the folder the er the downloaded file is in.
#Use keyboard keys '''Ctrl + J''' to open Firefox's download manager
#* or use ( press''' alt''' to display the menubar) Tools -> Downloads
# in the downloads window find the file entry you are looking for and right click
# use the option ''open containing folder''
* see [[downloads window]] <-- clickable link --
* and [[unable to download or save files]]
Please post back with how you get on.

I can access my time capsule from my mac mini at work but my macbook can only access it from my home network. how do i fix this?

I have a Mac Mini and a MacBook, both were configured at home to access the time capsule. I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home. The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow. Accessing the same files from an older HP laptop is as fast as accessing its own hard drive. How can I speed up the accessing of these files from my apple products. One would think they would work fast and the 'windows' computers would take minutes to map the drive each time...
Thanks for any help.

I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home.
This cannot happen by magic though.. you must have configured the mini to access the TC remotely.. which method are you using, BTMM and iCloud??
The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
How is the Macbook configured to access the TC remotely?? If you are trying to use BTMM and iCloud, then it might be a case that with the mini running the connection cannot be done by more than one computer at a time.. this is generally the case although I do not know if that is specifically true of BTMM method. Try turning off the mini and leave it off.. (off not standby)... then reboot the TC when you are at home.. and then try and connect the laptop to the TC the next morning from work. See if it is then able to capture the connection.. if so start up the mini and I suspect it now will not be able to connect.. that will prove that the TC cannot cope with two remote connections.
There also could be another factor in here. If you are accessing the laptop via the same router as the mini is on.. then actually you cannot have two users mount the same files on a TC.. from the same IP address.. as far as the TC is concerned both devices have identical IP, that is the public IP of the work location router.
If you happen to not be using BTMM then the situation is even easier.. you cannot make two different devices connect to the same network resource using the same port. That is the failing of the NAT system.. one device uses the port then it cannot be used by a second device. You will need to do some fancy footwork and use a different port.
Anyhow tell us exactly how you are doing remote access.. otherwise I am just guessing.
Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow.
Are you talking about files you are hosting on the TC?? Not Time Machine backups??
Can you tell me exactly how you are accessing the TC.. please do a test..
Copy a file to the TC and from the TC using the Laptop.. Use a single very large file, eg 1GB movie file.
Give me a read and write speed.. you can use activity monitor to give me an aprox average speed as well as peak.
Do the same test from the same computer with wireless turned off running ethernet.
Then do the tests from the mini.. same ones.. copy large file to and from the TC by ethernet and by wireless.. when using ethernet make sure wireless is off.
I strongly recommend you set IPv6 to link local only for your wireless and ethernet setup in the Mac.
eg
Now do the test from the HP laptop and give me the results from that.
Is the issue wireless only.. ??
Then you might need to spend a bit of time fixing the wireless in the Macs.. you can run wireless diagnostics in Mavericks.
About Wireless Diagnostics

I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. suggestions to complete backup please?

I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. the same thing happens when just trying to save my pictures from iphoto to a flash drive. suggestions to complete backup please?

Sounds like you'll need to access that drive while it is not booted. You need to replace it anyway, so do that, then one way or another (ext enclusure, et), access it and copy files.
If you keep trying to boot it, you might kill it for good and not get your files, so just swap it out first.

After Mountain Lion update - problems synching contacts and accessing previous Time Machine backup

I have just set up a MacBoook Pro with a new SSD drive to replace the internal hard drive. I made sure I had a current Time Machine then connected the SSD drive externally and installed Mountain Lion. I installed the SSD drive into the computer. Before restoring applications from the Time Machine backup, I enabled the root user, logged on as that and deleted all other accounts as I have previously had issues with creating a new account from a backup and making that the 'home' user.
All went well except that a few seconds after I opened Contacts they all disappeared. They were replaced with two entries - one for Apple and one with the name of the home account.
I tried to retrieve Contacts from the Time Machine backup. I could see all the past dates but they were all red and inaccessible.
I looked at Contacts in my account at iCloud.com - they were the same 2 contacts as my local machine. I went through the installation process again but made sure that there was no connection to the Internet on completion. My contacts were intact. I exported them to a file and turned on the Internet. A few seconds later, my Contacts were gone..!
I imported from the backup I had made but, after a few seconds they were replaced with the two contacts from iCloud. Nothing I tried would allow me to add the contacts and have them synch to iCloud. I finally found a workaround:
1 disconnect from the Internet
2 import Contacts from the export file
3 select all contacts (ctrl-A) and drag them to the 'on my mac' account in Contacts
4 connect the Internet and watch all the contacts disappear from the iCloud account
5 select all contacts from the 'on my mac' account adn drag them to the iCloud account.
6 watch them synch to iCloud
I still don't understand the problem - perhaps someone can enlighten me - but here's the workaround if someone is having the same problem.
And I still can't access the Time Machine backup that I used to setup the MacBook Pro. Looking at the files within the Time Machine the backup. it looks as though it is probably a permissions issue but I don't see why as the account I am using is the same name as the one used to create the backup. Any guidance would be appreciated.
Jeff

I think you went about this the wrong way. ok....
Could you please try this... (1) Open Address Book - keep it as the main window. (2) Enter Time Machine from the icon in the menu bar... do you have that icon? If not, Open System Preferences, Click Time Machine, put a check mark in Show Time Machine in Menu bar. Close System Preferences. Go back to your addressbook. Make it the primary application open. Now go to the icon in the menu bar that represents TimeMachine and click Enter Timemachine. You should see your stuff...
if you dont...
I would also try...
Open system preferenes. go to the icloud tab. sign out. then sign in.
jdxxs wrote:
I have just set up a MacBoook Pro with a new SSD drive to replace the internal hard drive. I made sure I had a current Time Machine then connected the SSD drive externally and installed Mountain Lion. I installed the SSD drive into the computer. Before restoring applications from the Time Machine backup, I enabled the root user, logged on as that and deleted all other accounts as I have previously had issues with creating a new account from a backup and making that the 'home' user.
All went well except that a few seconds after I opened Contacts they all disappeared. They were replaced with two entries - one for Apple and one with the name of the home account.
I tried to retrieve Contacts from the Time Machine backup. I could see all the past dates but they were all red and inaccessible.
I looked at Contacts in my account at iCloud.com - they were the same 2 contacts as my local machine. I went through the installation process again but made sure that there was no connection to the Internet on completion. My contacts were intact. I exported them to a file and turned on the Internet. A few seconds later, my Contacts were gone..!
I imported from the backup I had made but, after a few seconds they were replaced with the two contacts from iCloud. Nothing I tried would allow me to add the contacts and have them synch to iCloud. I finally found a workaround:
1 disconnect from the Internet
2 import Contacts from the export file
3 select all contacts (ctrl-A) and drag them to the 'on my mac' account in Contacts
4 connect the Internet and watch all the contacts disappear from the iCloud account
5 select all contacts from the 'on my mac' account adn drag them to the iCloud account.
6 watch them synch to iCloud
I still don't understand the problem - perhaps someone can enlighten me - but here's the workaround if someone is having the same problem.
And I still can't access the Time Machine backup that I used to setup the MacBook Pro. Looking at the files within the Time Machine the backup. it looks as though it is probably a permissions issue but I don't see why as the account I am using is the same name as the one used to create the backup. Any guidance would be appreciated.
Jeff

Can I back up to Time Machine from hard drive of failed Macbook?

My Macbook has just completely failed (I think an issue with power supply).
I had a bulging battery and have a new Macbook Pro on the way, but as I live in a very remote area this is taking a while. So, one day, my Macbook just wouldn't start again.
I hadn't backed up to Time Machine for about a week and would really like to get all the missing data. When the new computer arrives I'm planning to use Migration Assistant to migrate all my data from Time Machine.
So, my question is, is it possible to back up to Time Machine from the hard drive of my dead Macbook? I was thinking either cloning it somehow, or making a disk image and booting it from another Macbook, but this is stretching the limits of my limited IT skills. I don't want to interfere with the other Macbook I'm using or inadvertently wipe the data on the hard drive or Time Machine disk.
Any advice much appreciated!
My Macbook ran Snow Leopard and was up to date with software updates as of two days ago. It was purchased about two years ago, but I think it's manufacture date was about March 2008.

Thanks Noondaywitch and Pondini!
The HD of the failed Macbook turned out to be fine. Just to be safe I did a full functional back-up of my Time Machine disk to another external disk as well as cloning my Macbook hard drive using Carbon Cloner to another partition of the external disk.
I then booted from a friend's Macbook and did an incremental Time Machine backup from the original Macbook HD to the original TM backup (making sure I excluded the host computer's hard drive from the backup!); when I did the backup it asked whether I wanted to "Reuse backup" I clicked yes.
As said, the hard drive was fine, but at setup I needed an ethernet or firewire connection, which I didn't have on the enclosure, so I migrated my data to the new Macbook Pro using the original TM backup. Strangely, the backup said it was transferring only 120GB, whereas the HD had 150GB of used space. Redundant files, etc. perhaps? Anyway, it's just transferring now, so will sit back and read the paper and see what it looks like in an hour and a half!
Thanks very much again!
Now, if anyone's got any suggestions to fix my old Macbook, which I was going to give away to impecunious friends if they bought a new battery……
HD is fine, power seems buggered, the rest, I don't know. Suggestions welcomed (I live 300+kms from the nearest service centre, so it's strictly DIY or go to local computer shop who know nothing about Macs).

Error Code 0x80070035 shows when I try to Access Windows XP machine from Windows8/Windows7

Error Code 0x80070035 shows when I try to Access Windows XP machine from Windows8/Windows7. in my PC i m installed windows8 and used primary and secondary IP. Primary is used for Access my Domain/Internet and secondary IP is used for access my VPN and
there is no internet on VPN. VPN is only used for my Head Office Appication. After i give secondary IP to my windos8/windos7 PC the Active network status changed to private network and not able to acces windows XP machines. Please Advice...

Hi,
This error means that the Network path was not found. Was Windows XP locating in the same network as the secondary IP on Windows 8/7?
Please try the solution below. Use the IP address of the target computer, not the computer name.
1) Find out what the target computer's IP address is. It is desirable to give the target computer a static private IP address, for example, 192.168.1.10, so it does not change. Use the local windows help when sitting in front of the target computer
to do this if you don't know how.
2) When sitting in front of the Windows 7 computer you want to access the target computer from, open Windows Explorer and in the address bar type \\ followed by the target computer's static address, for example,\\192.168.1.10 and hit enter.
If the target computer uses username/password sharing, after a few seconds you will be prompted for credentials. Enter the same username and password employed to log on to the target computer when you are sitting in front of it.
The target computer will be added to the Windows 7 computer's Network list, appearing as an IP address instead of a computer name. Then you can access its shares just as if it were listed by name instead of by number.
Kate Li
TechNet Community Support

I have a new macbook air, and want to transfer all my data using time machine from my old macbook running leopard, is this possible and easy

I have a new macbook air, and want to transfer all my data using time machine from my old macbook running leopard, is this possible and easy and will it transfer all my musc and photos?

The Setup Assistant can restore your data from a Time Machine backup. You'll be asked if you want to do this the first time you turn the computer on.
(60797)

Access to Time Machine from different computer

Similar Messages

Maybe you are looking for