Access to Windows Wireless Lan

hi, i used to go to my friend's office where he is using Windows. he access net in his laptop (windows based)using a wireless LAN card. I tried to access the same using my i Book. but still i could nt succeed. pl help. thanks a lot for the patience
ajai
iBook G4 Mac OS X (10.4.6)

be more specific and give details about your toil.
sorry for the delay. let me be more clear and sorry for the confusion. the question is simple. can i access internet from a windows based wireless lan router? how can i do that? when i tried for a couple of times, my ibook g4 is not identifying the wireless network. dear forum, pl help
regds
ajai
iBook G4 Mac OS X (10.4.6)

Similar Messages

Thinkvantage "access connections windows wireless service" has stopped working

My new computer is a T400 running Windows 7 (lenovo disk installed after purchase) .
While it still connects to the internet through the Windows(?) "open network and sharing center the Thinkvantage Technologies "access connections windows wireless service" has stopped working. It worked fine for a while (4-6 weeks).
Any ideas on how to get it started again?
Thanks
John

Thank you for your reply. I'm just not sure what "it" to uninstall or where to get the new "it" to download. Would you mind adding those details for me? I appreciate your help
John

MacBook - Windows Wireless Lan?

Hello, everyone.
I just got my new MacBook Pro.
I have a desktop PC that I need to share/sync files with.
How can I do that over wifi?
I have no clue how to setup this local network, so please help?
Thank you!

Update: I can actuall see and access my MacBook Pro within Windows. But I can't see my PC on the MacBook

Cisco Wireless Control System need wireless Lan Controller ?

Cisco Wireless Control System need wireless Lan Controller , for Rogue detection

Hi Joao,
The WCS is used in conjuntion with the WLC (Wireless Lan Controller) for Rogue Detection. It is not a must for this function but more of an add-on :)
The Cisco WCS is an optional network component that works in conjunction with Cisco Aironet Lightweight Access Points, Cisco wireless LAN controllers and the Cisco Wireless Location Appliance.
From this doc;
http://www.cisco.com/en/US/products/ps6305/index.html
Overview of WCS
The Cisco Wireless Control System (WCS) is a Cisco Unified Wireless Network Solution management tool that adds to the capabilities of the web user interface and command line interface (CLI), moving from individual controllers to a network of controllers. WCS includes the same configuration, performance monitoring, security, fault management, and accounting options used at the controller level and adds a graphical view of multiple controllers and managed access points.
WCS runs on Windows 2003 and Red Hat Enterprise Linux ES 4.0 and AS 4.0 servers. On both Windows and Linux, WCS can run as a normal application or as a service, which runs continuously and resumes running after a reboot.
The WCS user interface enables operators to control all permitted Cisco Unified Wireless Network Solution configuration, monitoring, and control functions through Internet Explorer 6.0 or later. Operator permissions are defined by the administrator using the WCS user interface Administration menu, which enables the administrator to manage user accounts and schedule periodic maintenance tasks.
WCS simplifies controller configuration and monitoring while reducing data entry errors with the Cisco Unified Wireless Network Controller autodiscovery algorithm. WCS uses the industry-standard SNMP protocol to communicate with the controllers.
From this good doc;
http://www.cisco.com/en/US/products/ps6305/products_configuration_guide_chapter09186a00806b7270.html#wp1131195
Detect and Locate Rogue Access Points
From this WCS doc;
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806f070a.shtml#new5
Rogue Detection under Unified Wireless Networks
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080722d8c.shtml
Hope this helps!
Rob

Access Connections does not accept Windows Wireless Config

Hi All,
We are rolling out RADIUS/802.1x wireless lan in our enterprise. The wireless settings are deplyed via AD grouo policy - no problems there.
I have an issue when i configure my access connections (ver 5.21) on my T61 machine. I configure AC to use Windows wireless security settings whcih are picked up correctly. The issues occur when i switch from this profile to another profile for exampls and vice versa. AC seems to think that i need to configure my wlan security settings each time i switch to that profile and wont connect. I get an error message:
The SSID 'WM2009' selected for this profile must be configured in windows. Click OK to configure the wireless settings in Windows'.
I know that the wireless settings are fine, as i can connect with the window wireless client fine - its just AC that has the issue.
Any ideas appreciated!

Domain policy wireless profiles are not compatible with Access Connections.
The problem stems that Domain profiles are stored in a different part of the registry than a locally created WZC profile. Since these are part of the domain policy, they cannot be altered locally. Microsoft wouldn't provide Lenovothe encryption used (for obvious security reasons), so the domain policy based profiles can't be manipulated by Access Connections.
But we do provide an ADM template that can be used to do much the same things.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=ACON-DEPLOY

Does Tiger require ownership (and sharing) of wired printers on a wireless LAN? My G4 (Tiger) is also wired to the LAN, and can access all wired printers through the router. Wireless Macs cannot even find the printers.

Does Tiger require ownership (and sharing) of wired printers on a wireless LAN? My G4 (Tiger) and all printers are wired to the LAN, and the G4 can access all printers through the router. Additional wireless Macs (Snow Leopard and Mountain Lion) cannot even find the printers. Yet, if the G4 shares the printers, then ALL computers on the LAN can access them. However, this requires the G4 to remain powered. Is there a workaround that would allow me to shut down the G4 and still use the printers?

Hello BDAqua!
Well, I am halfway there. Following your steps on the Snow Leopard MBP, the newer printer (a Canon MX860 inkjet) appeared automatically under the "default" icon on the ADD printer window. I used the IP icon with the HP Jetdirect-Socket protocol to find and add the older printer, (an HP 4000N). That required running a configuration page from the printer to locate its IP address. I printed to both printers through this laptop with success!
I then followed exactly the same procedure with the Mountain Lion MBP. For both installation attempts, I got an error message window: Unable to verify the printer on your network. "192.168.111" may not exist or is unavailable at this time. Would you still like to create the printer? If I click Continue, it creates the icon and name in the printer list. However when I attempt to print from an app. the next message says, 'Printer is unavailable.'
Why one laptop finds and uses both printers, and the newer laptop does not, just floors me!
Thank you for your ongoing assistance.
Bill

HP Officejet 6500, Windows XP and 7, wireless LAN security code is not accepted

The security code of my wireless LAN is not accepted by the HP6500A. According to the diagnostic software of HP a code consisting of more than 50 characters is required (the total number of characters can not be identified because the code isgoing on out of the window). The security code of the route consists of 12 characters. Resetting the printer is not solving the problem.
This problem was identified after rinstalling the software after problems with printing: connection with the printer was identified; message: "busy with printing", but no printing result at all.

Security codes can be in ASCII or HEX. I'm guessing that the diagnostics is reporting HEX and the printer entry is in ASCII.
You can try running the diagnostics SW on the Windows 7 computer. It might return the key in ASCII.
A good option is to get the password from somewhere other than the diagnostics. Maybe you stored it somewhere or wrote it down? Once you get it try to enter from the front panel.
Can I get a little information from you?
What router brand model?
What security mode are you using (WEP, WPA, WPA2)?
Which model of the 6500 do you have (6500 or 6500a)?
Please mark the post that solves your problem as "Accepted Solution"
Sometimes it takes several posts back and forth to get to a solution - please be patient.
I am employed by HP

Weird lost access to iMac's desktop via Airport Extreme wireless LAN

This is weird and complicated. I'll try to keep it simple.
1. Two computers on a wireless LAN via Airport Extreme: G4 Powerbook and 20" G5 iMac. The LAN has worked flawlessly and seamlessly for several years, and except for this ONE anomaly, still does.
2. When logged-in to the iMac from the Powerbook, all its files and contents show up normally in it's networked-drive window in Finder,
3. EXCEPT the desktop. And I mean the real desktop which is under my ID under USERS.
4. Searching the Powerbook from the iMac, however, works just fine and shows all of the Powerbook's contents.
Repairs of Permissions on both computers have accomplished nothing.
There is one other peculiar symptom: there was a .wmv movie file sent me by a friend, and I had a copy of it on the desktops of both computers. It sat there, showed up and ran just fine, until one day something curious happened:
The file would show up in the column-view Finder window of the iMac's desktop when I opened it from the Finder Window, but would, after about a second, disappear!
If I try to import, on the Powerbook, some random file into the iMac's Desktop folder, it appears for a brief second and then the folder once again displays as empty.
I have trashed that wmv file, and yet sometimes its name blinks up on the iMac's desktop list (that is, again, the column view display in the Finder window).
This is profoundly weird.
Oh, and there's nothing changed or weird about the SHARING settings. Personal File Sharing is enabled on both computers, as is Printer Sharing, and itunes music sharing is also enabled. All of these continue to work just fine. Firewall is enabled, but always has been.
Owen

Well, when in doubt try all the obvious things FIRST!
I rank Disk Utility from the install disk, did a disk repair, and, well, Bob's your uncle, and all is fine again. Apparently that ghost file screwed up the count of files (I'm not sure what that means, but it seems consistent with a file that would materialize and then disappear, and screw up display of a folder's contents - the folder it was lurking-in invisibly.
Very peculiar, none the less.
Owen
I'll leave this open for another day, if only to see if someone has an explanation for what may have happened, since that might be useful to others, besides satisfying my own curiosity.

Lenovo Yoga 13 Downgrade to Windows 7 Wireless Lan Driver & USB3.0 Driver

Hey guys,
I have purchased the Yoga 13 in U.A.E in last Feb. with AED4,999.00
But some programms does not work with Windows 8. So I am using Windows7 with multi-boot.
Guess you guys also have such problem.. eventually finding out the WIFI Driver & USB3.0 Driver.
Now, I have succeeded in installing both of them.
1. Wireless Lan Driver : Realtek RTL8723A Wireless LAN 802.11n USB 2.0 Network Adapter.
   The way I found this driver is... Download all the REALTEK driver in a designated folder.. of course uncompressed.
   And then using the contraol panel... updated the driver with the designated folder.
   Now it is working very well.
2. USB3.0 Driver
It was an easy game. I just have downloaded thee Intel USB3.0 Driver for Windows7... you could find it through google with easy.
And just installed it. It works very well.
=> You could download the file at http://me2.do/xKBVnWo3
      (just put password : 4321 )
If you guys have problem with above issues... or need the file let me know with my mail at xxxxxxxxxxx
Anyhow, there are still two drivers I couldn't find.
Jerry Bong
Moderator note; e-mail address removed to stop the spambots getting it

hi jerrybong,
Thank you for Sharing this,
This will really Help most of Yoga 13 users and Windows 7 fans,
Kudos for this!
Can you also let us know what are drivers you're still missing? Can you post the Hardware ID of those maybe we can help,
Thanks and Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Windows 8 and Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC

Hi!
I hava a Toshiba L650 - 107 PSKI JE and I am having a problem with the my wireless network adapter on windows 8.
My network adapter is Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC and works fine on windows 7. Two days ago I formatted my hard drive and install windows 8. The problem is that for much drivers I keep installing, The wireless keep turned off. There's no way I can move the slide from off to on.
I already tried a lot of drivers from toshiba and from realtek but doesn't work.
I went to see the Network Connections (Control Panel > Network and Internet > Network Connections) and the Ethernet is fine, I connect a cable and it is fine, but wi-fi says "Not connected".
How do I solve this problem?

Satellite L650-107 (PSK1JE-00P003EP)
Downloads here.
A computer from Portugal? (Specifications attached.)
This driver should work on Windows 8.
Realtek Wireless LAN Driver
But your problems may be more fundamental. Prior to loading Toshiba-specific programs, you probably need to install something like this.
Toshiba System Driver - Windows 8 beta
And for the function keys to work, you'll need still another Toshiba utility.
-Jerry
Attachments:
satellite_l650.pdf ‏3264 KB

Windows Client cannot connect to wireless LAN through EAP-TLS

I have a Cisco Aironet Access point which cannot be authenticated by a remote RADIUS server to connect to wireless lan through EAP-TLS. These is the debug output from the AAA process.
*Mar 7 10:56:56.337: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 10:56:56.369: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:56:56.385: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:56:56.385: dot11_auth_parse_client_pak: id is not matching req-id:1re
sp-id:2, waiting for response
*Mar 7 10:56:56.401: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:56:56.717: dot11_auth_dot1x_parse_aaa_resp: Received server response:
GET_CHALLENGE_RESPONSE
*Mar 7 10:56:56.717: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server r
esponse
*Mar 7 10:56:56.785: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:56:57.097: dot11_auth_dot1x_parse_aaa_resp: Received server response:
GET_CHALLENGE_RESPONSE
*Mar 7 10:56:57.097: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server r
esponse
*Mar 7 10:56:57.101: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:56:57.393: dot11_auth_dot1x_parse_aaa_resp: Received server response:
GET_CHALLENGE_RESPONSE
*Mar 7 10:56:57.393: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server r
esponse
*Mar 7 10:56:57.397: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:56:57.673: dot11_auth_dot1x_parse_aaa_resp: Received server response:
GET_CHALLENGE_RESPONSE
*Mar 7 10:56:57.673: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server r
esponse
*Mar 7 10:56:57.677: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:56:57.953: dot11_auth_dot1x_parse_aaa_resp: Received server response:
GET_CHALLENGE_RESPONSE
*Mar 7 10:56:57.953: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server r
esponse
*Mar 7 10:56:57.957: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:56:58.317: dot11_auth_dot1x_parse_aaa_resp: Received server response:
GET_CHALLENGE_RESPONSE
*Mar 7 10:56:58.317: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server r
esponse
*Mar 7 10:56:58.321: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:56:58.685: dot11_auth_dot1x_parse_aaa_resp: Received server response:
GET_CHALLENGE_RESPONSE
*Mar 7 10:56:58.685: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server r
esponse
*Mar 7 10:56:58.685: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:56:58.993: dot11_auth_dot1x_parse_aaa_resp: Received server response:
GET_CHALLENGE_RESPONSE
*Mar 7 10:56:58.993: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server r
esponse
*Mar 7 10:56:59.041: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:57:01.077: Client 0811.9650.8cb0 failed: reached maximum retries
*Mar 7 10:57:08.997: %RADIUS-4-RADIUS_DEAD: RADIUS server 165.72.12.12:1812,181
3 is not responding.
*Mar 7 10:57:08.997: %RADIUS-4-RADIUS_ALIVE: RADIUS server 165.72.12.12:1812,18
13 is being marked alive.
*Mar 7 10:57:14.481: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 10:57:14.521: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:57:44.521: %DOT11-7-AUTH_FAILED: Station 0811.9650.8cb0 Authenticatio
n failed
*Mar 7 10:57:44.801: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 10:57:44.829: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:58:14.829: %DOT11-7-AUTH_FAILED: Station 0811.9650.8cb0 Authenticatio
n failed
*Mar 7 10:58:15.105: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 10:58:15.141: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:58:45.141: %DOT11-7-AUTH_FAILED: Station 0811.9650.8cb0 Authenticatio
n failed
*Mar 7 10:58:45.425: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 10:58:45.449: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:59:15.449: %DOT11-7-AUTH_FAILED: Station 0811.9650.8cb0 Authenticatio
n failed
*Mar 7 10:59:15.729: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 10:59:15.753: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:59:45.753: %DOT11-7-AUTH_FAILED: Station 0811.9650.8cb0 Authenticatio
n failed
*Mar 7 10:59:46.009: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 10:59:46.037: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:59:50.077: Client 0811.9650.8cb0 failed: reached maximum retries
*Mar 7 10:59:50.349: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 10:59:50.373: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 10:59:55.077: Client 0811.9650.8cb0 failed: reached maximum retries
*Mar 7 10:59:55.341: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 10:59:55.361: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 11:00:00.077: Client 0811.9650.8cb0 failed: reached maximum retries
*Mar 7 11:00:00.333: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 11:00:00.357: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 11:00:05.077: Client 0811.9650.8cb0 failed: reached maximum retries
*Mar 7 11:00:05.341: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 7 11:00:05.365: dot11_auth_parse_client_pak: Received EAPOL packet from 08
11.9650.8cb0
*Mar 7 11:00:10.077: Client 0811.9650.8cb0 failed: reached maximum retries

Kindly get verified the configuration and the compatibility if there is a mismatch. Please find the link below for more information on EAP-TLS functions in Access points and clients.
http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_white_paper09186a008009256b.shtml#wp39110

Wireless LAN Controller not broadcasting network to Access points

Good Day Team,
I am working with a 2100 series WLC controller and 1100 series access point.
I noticed that the wireless lan controller is working. Also the access point is working.
The issue is that there is no internet connection on the access point.
What could be the error?
Kindly advice

Try do diagnose your problem following this steps:
1) Connect to the wireless network
2) Check your IP address with "ifconfig"
3) Check if your gateway is set correctly with "route -n"
4) Try to ping your gateway. Is it working?
5) Try to ping an internet IP like google: "ping 74.125.234.115"
6) Try to resolve names with "nslookup www.google.com" for example.
7) Try to traceroute to an IP or name on internet. Check the result to see the last hop you reached.
8) If you passed all those tests, try this: "telnet www.google.com 80"
If everything works, but not the test #8, your problem could be related to some proxy configuration.

AIR-CAP3501I access point not joining the Cisco 2100 Wireless Lan controller.

Hello All,
I am installing a new LAP (AIR-CAP3501I ) through the wireless lan controller (AIR-WLC2112-K9) with software version 7.0. I have an external ADSL modem which will act as the DHCP server for the wireless clients and the LAP.
Please find my network setup as below:
The ISP ADSL modem , WLC and LAP are connected to a unmanaged POE switch. The LAP gets its power through the POE switch. When i connect the LAP and the WLC to the switch along with the ADSL modem, the LAPs are getting the ip address from the ADSL modem, however they are not joining the WLC for further process.
ADSL Modem ip address: 192.168.1.254
Management ip address on the LAP: 192.168.1.1 ( Assigned to port 1, untagged Vlan).
Ap Manager ip address: 192.168.1.1 ( Assigned to the same port i.e port1, Untagged Vlan).
The LAP is getting an IP address from the ADSL modem in the range of the DHCP scope.
I will paste the logs very soon.
Please let me know if i am doing anything wrong oe what will be the issue.
Thanks in advance,
Mohammed Ameen

Hello All,
Please find the logs for "debug capwap event" from the WLC below:
*spamReceiveTask: Sep 26 19:44:59.196: e8:04:62:0a:3f:10 Join Version: = 117465600
*spamReceiveTask: Sep 26 19:44:59.197: e8:04:62:0a:3f:10 Join resp: CAPWAP Maximum Msg element len = 92
*spamReceiveTask: Sep 26 19:44:59.197: e8:04:62:0a:3f:10 Join Response sent to 192.168.1.156:45510
*spamReceiveTask: Sep 26 19:44:59.197: e8:04:62:0a:3f:10 CAPWAP State: Join
*spamReceiveTask: Sep 26 19:44:59.197: e8:04:62:0a:3f:10 capwap_ac_platform.c:1216 - Operation State 0 ===> 4
*apfReceiveTask: Sep 26 19:44:59.198: e8:04:62:0a:3f:10 Register LWAPP event for AP e8:04:62:0a:3f:10 slot 0
*spamReceiveTask: Sep 26 19:44:59.341: e8:04:62:0a:d1:20 DTLS connection not found, creating new connection for 192:168:1:158 (45644) 192:168:1:2 (5246)
*spamReceiveTask: Sep 26 19:45:00.119: e8:04:62:0a:d1:20 DTLS Session established server (192.168.1.2:5246), client (192.168.1.158:45644)
*spamReceiveTask: Sep 26 19:45:00.119: e8:04:62:0a:d1:20 Starting wait join timer for AP: 192.168.1.158:45644
*spamReceiveTask: Sep 26 19:45:00.121: e8:04:62:0a:d1:20 Join Request from 192.168.1.158:45644
*spamReceiveTask: Sep 26 19:45:00.123: e8:04:62:0a:d1:20 Join Version: = 117465600
*spamReceiveTask: Sep 26 19:45:00.123: e8:04:62:0a:d1:20 Join resp: CAPWAP Maximum Msg element len = 92
*spamReceiveTask: Sep 26 19:45:00.124: e8:04:62:0a:d1:20 Join Response sent to 192.168.1.158:45644
*spamReceiveTask: Sep 26 19:45:00.124: e8:04:62:0a:d1:20 CAPWAP State: Join
*spamReceiveTask: Sep 26 19:45:00.124: e8:04:62:0a:d1:20 capwap_ac_platform.c:1216 - Operation State 0 ===> 4
*apfReceiveTask: Sep 26 19:45:00.125: e8:04:62:0a:d1:20 Register LWAPP event for AP e8:04:62:0a:d1:20 slot 0
*spamReceiveTask: Sep 26 19:45:00.273: e8:04:62:0a:d1:20 Configuration Status from 192.168.1.158:45644
*spamReceiveTask: Sep 26 19:45:00.273: e8:04:62:0a:d1:20 CAPWAP State: Configure
*spamReceiveTask: Sep 26 19:45:00.273: Invalid channel 1 spacified for the AP APf866.f2ab.24b6, slotId = 0
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Updating IP info for AP e8:04:62:0a:d1:20 -- static 0, 192.168.1.158/255.255.255.0, gtw 192.168.1.254
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Updating IP 192.168.1.158 ===> 192.168.1.158 for AP e8:04:62:0a:d1:20
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Setting MTU to 1485
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Finding DTLS connection to delete for AP (192:168:1:158/45644)
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Disconnecting DTLS Capwap-Ctrl session 0xa06d6a4 for AP (192:168:1:158/45644)
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 CAPWAP State: Dtls tear down
*spamReceiveTask: Sep 26 19:45:00.277: spamProcessGlobalPathMtuUpdate: Changing Global LRAD MTU to 576
*spamReceiveTask: Sep 26 19:45:00.277: e8:04:62:0a:d1:20 DTLS connection closed event receivedserver (192:168:1:2/5246) client 192:168:1:158/45644).
The Acess point joins the Controller for 2-3 seconds and then unjoins again. I am not sure what i am doing wrong here. The access points are getting the IPs from the ADSL modem through the switch, then it talks to the WLC, however it does not join the controller for further process.
Note:
The Managemnet interface and the AP manager interface are assigned to the same port 1 with unassigned Vlan as mention above.

Exporting Access Connections profile / Import to Windows Wireless

Hi All.
I have an issue which i really hope someone have a solution for as either googling and searching through 53 pages on this forum has not provided me with an answer. Here goes...
The hospital on which i'm working are about to change their IT-infrastructure and when this migration takes place i will no longer be able to use Access Connections. I have about 30 profiles in AC and all of them with a security key which would be hell to setup again through windows wireless.
Do any of you know of a way to export profiles from AC and then import them to Windows Wireless?
Thanks in advance!

Domain policy wireless profiles are not compatible with Access Connections.
The problem stems that Domain profiles are stored in a different part of the registry than a locally created WZC profile. Since these are part of the domain policy, they cannot be altered locally. Microsoft wouldn't provide Lenovothe encryption used (for obvious security reasons), so the domain policy based profiles can't be manipulated by Access Connections.
But we do provide an ADM template that can be used to do much the same things.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=ACON-DEPLOY

All-in-One C440-5731 Wireless LAN error on Windows 7

Hi everyone,
I just purchase several All-in-One C440-5731 desktop.
Then I installed Windows 7 Professional into them.
Thre driver disc that included in package is for Windows 8, so i download all the driver from here:
http://support.lenovo.com/en_ID/downloads/default.page?
All the driver is working, but only ONE that dont working. Wireless LAN driver.
I've tried Athorus driver and Realtek driver, but both of them not working. In device manage the device driver still error, i've try anothe PC and the problem still the same.
Please help me, is there any idea how to make it work.
Solved!
Go to Solution.

hi khan2000,
Welcome to Lenovo Community Forums!
Can you post here the Hardware Id of the Wireless Device
     - In device manager Wifi device should show like Network controller with a yellow Icon.
                -Right-click on it and choose properties.
                -Click on the details tab on top
                -Change the property Value, change it to Hardware ID
                -then paste back here what's on the Value
Link to sample photo
This will help us the Name of the WIFI and will guide us on downloading the right driver
Solid Cruver
Thanks,
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Access to Windows Wireless Lan

Similar Messages

Maybe you are looking for