Access USB external HDD connected to Airport Extreme

Hi.
Today I configured "Back to my Mac" and I'm having a little issue with the external HDD that is connected to the Airport.
Let me explain the configuration: Airport Extreme (latest version) configured with Back to My Mac option, with an external HDD connected using USB port (The HDD is externanly powered). iMac computer with OSX Mavericks wireless connected, configured with iCloud Account and Back to My Mac with screen sharing).
I can access the shared screen and control the iMac from my Macbook Air outside my home network.
The issue is when I try to access the "network HDD" because I can connect using the right user but Finder windows never shows the HDD content. I have to disconect and reconnect to the external HDD to be able to see the files (If I have 3 windows and want to access the HDD on each of the 3 windows, I have to disconnect and reconnect 3 times).
Question:
There is any way to access the external HDD and be able to see its content using the configuration mentioned? The disconnect and reconnect procedure for each window is normal? There is a better configuration I can apply?. Just as information, from my MacBook Im able to see perfect the HDD content from outside my home network.
I know the question is a little bit confusing, but if you need any additional info please let me know.
Thank you.

Does this help?
http://apple.stackexchange.com/questions/117135/access-disk-attached-to-airport- extreme-over-internet

Similar Messages

Problem mapping USB external drive connected to Airport Extreme on my PC

I am having a problem mapping my USB external drive in my PC running WIndows Vista. Here is what I have so far:
USB External Drive connected to my AirPort Extreme which is connected to my Century Link modem/router.
I have installed the USB drive using the Airport Utility. In the Disks section the Enable File Sharing is checked, Secure Shared Disks is set to With a Disk Password, I have entered the password in the next 2 rows, and finally AirPort Disks Gues Access is set to Not Allowed. The section below named These Settings Configure Windows File Sharing is empty. Am I supposed to put something here?
I was also told I need to map the drive in my PC, but when I go to do that via the Computer and the Map Network Drive, I get stuck where it asks me to enter a folder name. I read many of the posts which tell me I need to enter among other things the disk's ip address, but I am unable to find it anywhere. Where do I find what to put here?
Can someone please help this frustrated user?

I had my USB drive on my APE working with Time Machine under 10.5.1 very reliably. A few days ago however, I needed to suspend a backup operation, and when I came back to restart it, time machine refused to mount the disk image on the drive. After several attempts to get it to connect with no luck I decided to delete the image (the sparce image file) and start over. Now TM refuses to create a new image.
BTW, on the Mac OSX hints site there have been suggestions to start a backup with the drive directly connected, then stop the backup, move the sparce image file to the root of the drive, reconnect the drive to the APE base station to get it working. I tried this again, but I think Apple has changed something in 10.5.2, because when directly connected TM no longer creates a sparce image file.
Anybody else seen this behavior after upgrading to 10.5.2?

Smart folder not searching external HDD connected to Airport Extreme

I have bunch of movie files (mp4 format) on external HDD connected to the new Airport Extreme station. When I create a smart folder on either one of the machines on my local network, the smart folder would not search at all through the HDD connected to the Airport Extreme.
I have another HDD connected directly to my PowerMacG5Quad and smart folders successfuly searches through that drive.
However, when I ask for any type of search (i.e. any kind of files) located on a networked external HDD, smart folders acts is if the networked drive is not even there.
Obviously, my purpose here is to have the difference machines access (RSS style) all the movies files located on the networked HDD.
Is it some permission in Airport Extreme?

Does this help?
http://apple.stackexchange.com/questions/117135/access-disk-attached-to-airport- extreme-over-internet

Access to external drives connected to Airport Extreme via USB Hub

I have 2 computers connected wirelessly to an Airport Extreme 802.11n base station. I have a Belkin powered USB hub connected to the USB port on the Extreme. There is a Lacie hard drive, a USB printer and a Kingston flash drive connected to the USB hub.
The printer was connected using Bonjour and is working fine. The other devices connected to the USB hub aren't getting picked up. They did work at one point, but are no longer viewable from the computers (MAC Book and Windows XP). How can I re-configure the Extreme or my computers so that they'll work again?

DLNA = Digital Living Network Alliance. DLNA works in a Server-Client fashion with the Server providing the means to stream audio/video files to the client. DLNA servers are also called media servers. The AirPort Extreme Base Station (AEBS), with an attached USB HDD at best, can perform as a media storage device ... not as a server. You would still need a media server (either hardware or software) to perform this role.
For example, I use a software DLNA-compliant media server, called TwonkyServer. I run this server on one of my Mac minis. It gets its media files that are stored on a USB HDD attached to my 802.11n AirPort Extreme Base Station (AEBSn). TwonkyServer then streams these video files to my Xbox 360 which performs as a media client/player.

USB External HD Connected to Airport Extreme - access from outside network?

Hi,
Is there any type of software that I can get that would allow me to access my shared external hard drive w/ my airport extreme from outside the network, like some type of ftp server or anything that would allow me to access it from outside my home?

A simple way would be to share it via Apple File Sharing and FTP...
You'll need a static Ip and a hostname, although it is easy to set up if you have a dynamic Ip too...
Creat a free hostname on "www.dyndns.com" (for example), open your AFP and FTP ports on your router, and then use sotware such as "Rumpus" for the FTP service and tell it what drive you want to share (it can be a network drive). For AFP, all you have to do is connect to the server from the finder, hitting "Go...Connect to Server.."
I've got my extreme drive shared globally and it works fine...just need some time and patience to set up the ports and hostnames...
If you need help on the setup just email me... [email protected] and i'll be happy to answer any questions...

HELP - iTunes 9. Library on external HDD connected to Airport Extreme

OK. I've done a search and found similar questions, but no real answer to my problem, so here goes:
I've got all my media contained on an external drive connected via usb to my airport extreme. My problem is that iTunes continually (95% of the time) redirects itself back to default folder on my iBook. The external drive is always on, so I'm not sure why iTunes seems to redirect itself. I have noticed that when I search out my external drive through Finder, there is a slight lag before the file list comes up? Could this be the iTunes issue? (it's trying to connect, but the lag throws it off, so it thinks the folder isn't there and creates a new one?)
Any insight would be greatly appreciated!

Final follow up: Sorry this took so long, but better late than never. So, I figured out why there was an issue with the "login item" solution....multiple accounts. It seems that one of the accounts wasn't properly login onto the Airport Express (and ultimately the external drive). This was bringing up an error message, but I wasn't seeing it (as it was showing up under the other account). Once I took care of the login issue on the other account, all was well. So, to sum it up, the best solution to this problem seems to be setting the external drive as a login item. Thanks again. The help was much appreciated.

Can you search an external hdd connected via airport extreme

I have my western digital 500gb harddrive connected to my airport extreme so I can use my HD wirelessly. I tried searching for files in my wireless harddrive through finder, but it doesn't seem to search it, only on my macbook itself. Is it possible to search the harddrive wirelessly?

Smokerz,
could you explain??
I spent over an hour with Apple Tech support and they said that Finder/Spotlight WILL NOT search a networked drive. However, I did find a bit of a work around:
1. In Finder Preferences: General - Select check box - 'Always open folders in new window'
2. Open up a Finder window
3. Select Airport Extreme. (Left column, Shared, name of Airport base station)
4. Select networked drive
5. Double Click a folder in your network drive that you want to search (this opens new window)
6. In the new window, type what you need in the search window (upper right hand corner).
Remember: The Finder window will default to the 'This Mac' in the search column (light grey line below the Toolbar)
7. In the Search column, This Mac and Contents are selected in Dark Grey. You should see
Search: *This Mac* "folder name" Shared | Contents File Name
8. Now select "folder name". This will search the contents of the selected folder and bypass your Mac.
If there is an easier way, could you please explain. TIA
Narvon
PS - If you try to select your networked drive in a new window as in step 5, this still won't work. You can only select specific folders within the drive. Lastly, you can move all your folders and files to 1 folder, however, this increases the search time (My network drive is 320GB in size and a search for 1 known file took just over 3 minutes).

How to access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

How can I access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

...Called it a roaming network. Wireless mode is create a wireless network. I have checked allow this network to be extended. Probably need to uncheck that?
Yes, that option should be deselected as it only pertains to when both routers are interconnected by wireless. Since you have a roaming network, they of course, would be interconnected by Ethernet.
The other important settings for a roaming network are:
Each router must have a unique station name. For the AirPort, this would be called its Base Station Name. I believe the default station name for Linksys routers is: linksys
Each router must broadcast a wireless network with an identical Network Name. For the Linksys, Network Name is the same as its SSID.
Each router wireless network must use the same Wireless Security type and password. The Linksys WRT-54G is capable of up to WPA2 Personal. If you have it set to this level of security, the AirPort should be at the same setting.
Make sure that each router is not on the same Radio Channel for the 2.4 GHz radio. In the US, there are basically only three non-overlapping channels: 1, 6, or 11. Set each so that they don't use the same channel but use of those three choices.

Why i can't find the external HDD plugged to airport extreme. i already format it with mac OS extended (journaled)

Why i can't find the external HDD plugged to airport extreme. i already format it with mac OS extended (journaled).
Does only certain branch of HDD can be connected to aireport extreme?
I collect some information and i knew i have to partiion the HDD into Mac OS extended (journaled),
and i did so. Still the usb HDD cannot be found.
The other question is, can i partition the HDD into two sections, one of it is Mac OS extended(journaled) while the other is Fat32?
I want to share Fat32 section with another PC with windows system.
Thanks a lot if you have any suggestions.

I had tried to set up the connection via usinb a powered usb hub as the bridge between external HDD and the airport extreme. i still cannot found the HDD in the "airport utilities".
This is my setting.
1. Set airport extreme as "sharing-single-ip" mode. The wireless network functions correctly.
2. Connect external HDD to MBA. Partition it into single-partition with Mac OS extended (journaled).
3. The HDD can be found if i plugged it directly to my MBA.
4. Connect a powered usb hub to airport extreme.
5. Connect external HDD to the powered usb hub.
6. Open airport utilities.
a. Select "airport extreme" in the sidebar.
b. Change the "Disks" sheet.
7. Cannot find an external Disk
Is there any problem here?
Please help me. Thanks a lot!!

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme.
Sorry, but no.
Time Machine will backup your Mac, but not the hard drive attached to the AirPort Extreme.
Time Machine will back up a hard drive only if it is attached directly to your Mac via USB or FireWire.

HT204057 Time machine back up via USB hard drive connected to Airport Extreme.

Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme? It worked very well.

Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme?
Time Machine backups are supported via USB hard drive connected to the AirPort Extreme"ac" version.
Time Machine backups were not supported via USB hard drive connected to earlier versions of the AirPort Extreme.
Some users who tried this on earlier version AirPort Extremes seemed to have some success with Time Machine backups....some had moderate success and some had no success with this. Count me in the "no success" category.
See the topic about Time Machine support for USB disks in this Apple Support document:
http://support.apple.com/kb/HT5924?viewlocale=en_US&locale=en_US

How do I access my hard drive connected to airport extreme?

I've already imported video to my hard drive. I had it previously connected via firewire. It's there in an imovie 08. However, when I open up imovie in the "Event Library" panel, my hard drive has a yellow triangle with an exclamation point on it. Does anyone know how I can access this?
Do I have to choose "import" first and then copy the movie back into imovie? I think this would defeat the purpose of storing the footage on the external drive, right? I'm trying to make my first movie, so please be gentle if this is an easy question to answer. It's throwing me for a loop right now.
Thanks again!

sorry, the hard drive is connected via USB to my airport extreme. Here's how i can look at the files:
Macintosh HD, under "shared" i select my hard drive, open it and then click on imovie events, then i can access the 19 different folders which contain multiple clips in each folder, along with an imovie thumbs file etc.
However, in imovie when create a new project, then click on import, it will ask me where i want to save the files, and on the drop down arrow, the only choice is my macintosh HD and I can't choose anything else. I really don't want to save them to my computer's hard drive if i don't have to. It seems there should be an easier way to do this, but i'm overlooking something. I just want to be able to make a movie with the clips that are already saved on my hard drive which is connected via airport extreme. Thanks again!

Stopped see files on external HD connected to airport extreme.

I have connected a 3TB external HD to my Airport Extreme. I have been able to use and access all the files over the network through finder without any issues. Recently I stopped being able to see the files in finder. I can still see the dirve and the main folder but that is it and I cannot see the file structure or individual files. This also has my iTunes files and Itunes can still connect to the file locations. Or I can say show in Finder and it will show by but still will not show other files. If I connect the HD directly to the computer then I can see all the files no problem. Thoughts?

OK...Here is where things stand:
I am logged in as the administrator on my Computer
When I connect the drive directly, do the Get info, I have read & write permissions
When connecting over wifi the Permissions say, "You have Custom access"
If I seach for an iTunes file that I know is on the remote HDD it plays
I can show this same file in finder and see the file structure
But I if try and open the structure top down, it won;t show access
Through Airport Utility I Have access and can see the extrenal drive and folder is shared.
Should "Back to Mac" be enabled? I am not sure what other knobs to turn at this point.

Time Machine clueless about external HD connected to Airport Extreme

This is not my first post about HD connected to Airport Extreme. Just came back from Apple store. Spoke to Geniuses there in tech support desk and they are clueless.
Here is situation: have 7 Macs in the house connected to Airport Extreme wirelessly. In that respect things are working fine. Last week I purchased brand new WD My Book external HD and connected it to Airport Extreme using USB (it also has Fire Wire but that is not a point here).
As per forum advices I re-formated drive using disk utility to Mac Extended journaled, GUID. here is result:
iMAC x 3, with Tiger - see, mount and use My Book easily, shows on desktop as mounted drive
MacBook Pro w. Tiger - same as above, back up every day to My Book
MacBook with Leopard x 2 - no My Book on desktop, Time Machine doesn't see it
Mac Mini with Leopard - same as above, no trace of My Book, Time Machine doesn't see it
* This problem evolved from me having regular 160 GB FAT32 HD connected to Airport Extreme. Again Tiger machines were using that drive every day no sweat.
* Then I decided to upgrade all Macs to Leopard for one single reason only - Time Machine. (Good that I didn't do it but rather decided to introduce new, bigger and better USB drive first).
* Western Digital My Book is being sold in Apple stores as "drive that is recognized by Time Machine" so I bought 1TB unit.
* All Macs and Airport Extreme are up to date.
Any suggestions? Thank you in advance,
Zack

I cannot tell you why your Apple Genius told you what he did, but he/she was dead wrong. Apple sells its Time Capsule product, so they are not interested in making the AEBS a product competitor.
I will give you a little secret for which you will forever be indebted to me.
Open your Terminal application in the Utilities folder and at the prompt enter or paste the following command pressing RETURN after:
defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Miraculously your problem will be Solved.

What are some of the best iOS apps can remotely played videos, audios, photos and text files from a NAS hdd connected to Airport Extreme USB port? And how to configure this setup?

I have already set up NAS hdd as connecting it at USB port of Airport Extreme, i also want to remotely access it from iPhone, so what's the next step? What are some of the best iOS apps can remotely played videos, audios, photos and text files from the NAS hdd and how to configure this setup?

*Edit - I am not able to connect to the NAS when hardwired to the airport extreme.

Access USB external HDD connected to Airport Extreme

Similar Messages

Maybe you are looking for