Access violation at address 0041B7D6 in module AcrobatPro_11_Web_WWMUI.exe Read of access 00000008

When installing Acrobat Pro, I receive these errors:
EAccess violation in module AcrobatPro_11_Web_WWMUI.exe at 0001B7D6
access violation at address 0041B7D6 in module AcrobatPro_11_Web_WWMUI.exe Read of access 00000008
The program will not run.
Help?

Sounds like you have a corrupt file and need to download again. As large as the download is, it is not surprising that an error occurs.

Similar Messages

  • Error Occuring While Processing Data With DIAdem 8.1Excepti​on EAccessVio​lation in module ntdll.dll at 000111DE. Access violation at address 7C9111DE in module 'ntdll.dll​". Read address 37363430

    Hello,
    We are having an issue running Diadem 8.1 on a new HP XW 9400 with Windows XP SP2. 3 errors have been occuring with frequent crashes, they are:
    1) "1Exception EAccessViolation in module ntdll.dll at 000111DE. Access violation at address 7C9111DE in module 'ntdll.dll". Read address 37363430.
    2) The instruction at "0x7c9111de" referenced memory at "0x352e302d". The memory could not be "read".
     3) ---Error---   DIAdem
    Error in Autosequence - processing in line: 74 (IARV_VAR_GET)
    Runtime Error while executing command "Iarv2Txt$ := FR(T9,L1)"
    Error type: ACCESS VIOLATION
    Error address: 000101DE
    Module name:ntdll.dll
    We are using the same scripts and version 8.1 on a variety of Dell desktop computers (W2K and XP SP2) without any issue, looking for suggestions as this affects no other software on the HP XW 9400 other than DIAdem. Appreciate any suggestions.
    Message Edited by swillh on 06-25-2007 08:55 AM

    Christian,
    I will answer your questions in the text below. Thanks for your help.
    Hi swillh,
    I also would like to help you.
    Unfortunately, The reported access violation in the central Windows ntdll.dll is very unspecific.
    May be the following questions will help you to provide me more info.
    1. You mentioned that the aut's and - I think - also the accessed text file reside on a server.
    Is there a stable network connection?
    The server can sometimes be a little slow but the connection is good. This computer is using the same connection that the prior computer utilized without issue.
    Are the files accessed by multiple clients simultaneously?
    It is possible that more than one computer can be accessing the same file, but again, this has never been an issue. We are reading the files only, not writing to them.
    The processing routines we are running have used for over 5 years without any issues until adding this computer.
    Is the text file read by one client while another client is writing the same file?
    No, files are "read only"
    2. Have you already tested opening the file with the FileOpen command before calling FR?
    Yes
    Do you see any chance to convert the aut to a vbs file? This gives you more alternatives in accessing text files.
    3. What do you mean with "processing ATD's with 30 or more channels of data"? Where is the relation between ATD files and data channels?
    Processing Crash Dummy data with file sets low in channel count (15 channels) result in successful processing without any crashes or access errors.  When processing dummies with more than 20 channels we sometimes encounter these issues. The higher channel count may be the only common factor I can find in these faults.
    Steve
    Message Edited by swillh on 07-09-2007 08:44 AM

  • Access violation at address 6761D581 in module 'ORA805.dll'.

    hi Gurus,
    When ever I try to connect the database through toad , I got this error 'Access violation at address 6761D581 in module 'ORA805.dll'. Read of address 00000010'. Please help me to resolve this issue.
    Oracle database: 10.2.0.1.0
    Oracle client: oracle froms 6i (sql 8.0.6.0.0)
    toad: 10.5.0.41
    Thanks in advance
    Sadiq

    Toad Advisor shows
    Warnings
    1- Incompatible Client and Server
    Client version (8.0.6.0.0) and server version (8.0.0.0) should not be used together according to metalink note 207313.1.
    Incorrect NLS_LANG
    2-
    NLS_LANG is AMERICAN_AMERICA.WE8ISO8859P1. Expected WE8MSWIN1252 (AMERICAN_AMERICA.WE8MSWIN1252) for Code Page 1252, Language ID 1033 (English (United States))

  • Access violation at address 67690153 in module 'ORA805.dll'. Read of addres

    Hi,
    Access violation at address 67690153 in module 'ORA805.dll'. Read of address 00000000
    Please solve the avove problem.

    Mahfuz wrote:
    Access violation at address 67690153 in module 'ORA805.dll'. Read of address 00000000
    Please solve the avove problem.Easy. Install a supported version of Oracle. Oracle 8 is long dead.

  • Access Violation at address 01136758 in module 'Sk...

    Every time I open Skype. It pops up with Skype has stopped working and shows the Access Violation error. 
    I'm using Win 8.1 64 bit. 

    Everything related to video in multiple applications appear to be crashing on your machine.  Something is causing that instability.  I can be buggy AMD drivers, game boosting software, overclocking or other failing hardware.  I would suggest a minimal/basic install of your video drivers without the bells and whistles including the catalyst control center (which is also crashing).  
    You should consider completely uninstalling the current drivers following AMDs guidance:
    http://support.amd.com/en-us/kb-articles/Pages/GPU57RemoveOldGraphicsDrivers.aspx
    Afterward a 3rd party cleaner like DDU should allow you to remove the remaining traces:
    http://www.guru3d.com/files-get/display-driver-uninstaller-download,14.html
    You can then try to install older/newer drivers  (August 2013 and above for Windows 8.1 support) until you find a set/configuration that doesn't create system instability.
    http://www.guru3d.com/files-categories/videocards-ati-catalyst-vista-win-7.html

  • Access violation at address 6ED40480 in module d3d...

    At the "Event Viewer" i see this error :
    Faulting application name: Skype.exe, version: 7.1.60.105, time stamp: 0x54c26993
    Faulting module name: d3d9.dll, version: 6.1.7600.16385, time stamp: 0x4a5bd9a9
    Exception code: 0xc0000005
    Fault offset: 0x00040480
    Faulting process id: 0x1df4
    Faulting application start time: 0x01d04aa4f34ab347
    Faulting application path: C:\Program Files\Skype\Phone\Skype.exe
    Faulting module path: C:\Windows\system32\d3d9.dll
    Report Id: 52198a23-b698-11e4-9a46-def8be872dc8
    Solved!
    Go to Solution.

    Did you reboot after the uninstall of Evaer?  If it still didn't uninstall properly, browse to your Skype phone folder (C:\Program Files(x86)\Skype\Phone or C:\Program Files\Skype\Phone) and rename or delete d3d9.dll.

  • Access violation at address 7300AD76 in module 'winspool.drv'

    Currently use Mactive's AdBooker application which has the ability to print a work order which is a Crystal Report they created and is displayed within the application using the Crystal Reports viewer when selecting the File-Send Work Order-Print.  We are able to view the work order report when our default printer is an HP 4000, Dell 5100cn, or Dell M5200.  We've recently added a new Dell 2330dn to our network and when we attempt to display the work order when this printer is selected as the default printer, the error listed in the Subject field is displayed.  The only difference between the printers listed is the printers we are able to print to are using Postscript level 2 drivers and the Dell 2330 has a Postscript level 3 driver which we are assuming may not work with the Crystal Viewer?  Does anyone know of a Postscript level 2 driver that could be used with the Dell 2330dn?  Dell's website & forums do not contain any Postscript 2 drivers.  Thanks.

    If you can open one of those reports using that same driver using Crystal Reports Designer to verify it does work. You may have to open each report up and set the default printer to this new one.

  • What does this error mean? Error: Access violation at address 0053DD46

    I am trying to run diff reports using batch scripts, and its very puzzling that some of the diff report scripts within the batch script are running and some are not, there is no consistency to what is getting errored out.
    I then tried running them manually in foreground on the client and I get the same issue. Has anyone encountered this issue? What do I make of it?,
    4/24/2013 1:29:30 PM - *** MDMConnect starting ***
    4/24/2013 1:29:30 PM - Logged in successfully.
    4/24/2013 1:29:30 PM - Started export job for PLN_FLD_ACCT_DIFF
    4/24/2013 1:29:34 PM - ERemotableException with message: "Server was unable to process request. ---> Error during Export. Export was unable to run. Error: Access violation at address 0053DD46 in module 'mdm_ntier_engine.exe'. Read of address 00000024" while running Export
    4/24/2013 1:29:34 PM - => ERROR: Data Relationship Management Server returned error: "Server was unable to process request. ---> Error during Export. Export was unable to run. Error: Access violation at address 0053DD46 in module 'mdm_ntier_engine.exe'. Read of address 00000024."
    4/24/2013 1:29:34 PM - *** MDMConnect stopping ***
    Thank you
    Tanuja Donavalli

    This is issue is coherent in DRM version 11.1.1.2
    Whenever a property is deleted, the references to that property would still exists/stored in tables. The next version of DRM is made to address this issue, where in it takes care of removing all references whenever we delete the property.
    Cause: Properties was deleted from DRM client but the value was still stored in the compare table for Difference export and causing export to fail.
    Solution: Need to recreate the deleted properties and remove the properties in the exports and delete the properties.
    Going Forward: Instead of deleting the properties we need to remove the property from the export and hide the property.
    Hope this helps.

  • SQL Issue Access Violation at address 09513DC9

    Access violation at address 09513DC9 in module 'WDBHandler.dll'. Write of address 00000000

    I use Taxware to make the backup
    I don't no how to run @@ on 2005 I use SQL Server management studio
    Same as you do for other SQL server versions. Just go to SSMS open new query and type below
    select @@version
    Can you give more error information did you got any stack dump. Can you please check SQL server errorlog . I guess this could be issue with tool you are using but not sure
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Articles

  • Access Violation at Address 7C91B21A

    I keep getting the following Linksys error:
    "Access violation at address 7C91B21A in module 'ntdll.dll'. Write of address 00000010."
    Also, whenever I open the Linksys Wireless Network Monitor, it says something about not being able to connect to/at the access point?
    I'm so confused. Just yesterday, I wasn't having any problem connecting to the internet. Now, it's not even showing that I have an available wireless network. If I right click on "wireless network connection" in my network connections, and click "view available wireless networks", it doesn't show any in range!
    I'm currently using my neighbor's internet (with their permission) to send this message, in an attempt at resolving the issue, but it's honestly driving me absolutely mad. Is there anyone who has any idea what the problem is?
    Also, if it helps at all, I'm under the impression that my PC is the problem, as opposed to the router, because my PS3 is picking up the wireless signal just fine.
    I appreciate any and all feedback! 
    Thanks.

    Un-install the Linksys Montior from the Programs Menu and then try to re-install the adapter...
    If you could not un-install the adapter you should reboot the system in Safe Mode and then perform the un-install...Once un-installed you should re-install the drivers...
    To re-install the Drivers insert the Linksys Setup CD into your CD-ROM drive, When the Welcome screen appears click Exit.Leave the adapter connected to the PC and reboot your computer...Once the computer is rebooted you should see a message "Found new Hardware"...When the  Hardware Update Wizard window appears, click Install the software automatically (Recommended) then click Next and it should install the adapter drivers...
    NOTE : This installation doesn't install the software(Linksys Monitor)...
    Once the Adapter is installed, Click on the Start button >>> Control Panel >>> Network Connections- Right click on the "Wireless Network Connection" icon and select "View Available Wireless Networks"- If you see your wireless network in the list, highlight it by 'single' clicking on it- Now click on the 'Connect' button below- If your wireless network is secured, it would ask you to provide the network key- Provide the wireless network key and confirm it again in the confirmation box and click "Connect"...It should connect to your Network and Internet...
    Message Edited by Klatch on 06-29-2009 01:28 PM

  • Error while executing "" command Error type ACCESS VIOLATION Error Address: 0006898E Module name:gfsdesk.DLL

    Hi All,
    I'm using diadem from .net Program. While on the run I'm getting the following error.
    Error While executing "" Command
    Error type ACCESS VIOLATION
    Error Address: 0006898E
    Module name:gfsdesk.DLL
    Anyone have any idea why this is happening?
    regards,
    Swaroop

    Hi Swaroop,
    It would be helpful to better understand what your code really does. The information that you called DIAdem from your enviroenment is not yet sufficient to understand what the problem might be.
    Andreas

  • "Access violation at address 00000000. Read of address 00000000" in Toad

    Dear DBA,
    I am using Oracle 10g R2 in Windows XP and Toad Version 9.6.0.27 And While Connecting to the Database , I am having *"Access violation at address 00000000. Read of address 00000000"* in Toad . Is there any Solution ?
    Thanks & Regards
    Vikash Chauradia

    We have the same issue here. I put a ticket in with support and received
    this response
    ==============================
    If you have two 10g clients installed only the first one listed in the
    environment variable path works in Toad 9.5. The other gets an access
    violation error. Could you please try and switch them just to confirm
    that is the same with yours?
    For Example:
    1. Right Click My Computer
    2. Properties | Advanced tab
    3. Environment Variables
    4. Scroll down system variables to Path | Edit
    Path=Developer-Suite 10 GR2 ; Oracle Client 10.2.0.1.0;
    to
    Path=Oracle Client 10.2.0.1.0 ; Developer-Suite 10 GR2;
    Thank you,
    Emran Elbrashy
    Senior technical consultant

  • Access violation at address 00000000. Read of address 00000000. (WRT54G)

    I recently started receiving the following pop up window (access violation at address 00000000. Read of address 00000000) every time I restart my machine.
    Sometimes I have one pop up, other times I have to shut down because it continues to give me continuous pop ups.
    Please advise.
    Jose Escalante

    Disconnect the Router from the computer & connect the computer directly to the Modem ...check if you are getting the same kind of Pop-ups ....
    If so then there is an issue with your own Operating System ,,,,

  • Java.exe crashing with Dr Watson access violation at address 500bf974

    We have been sucessfully runing an application delveloped with JDK 1.2.2 on a Pentium III machine with Windows NT 4 SP5 (384Mb RAM). I have replaced the Pentium III machine with a pentium 4 with 1Gb RAM (still running NT4 SP5). In fact, I simply took the HDD out of the PIII and installed it in the P4.
    All applications work correctly (Sybiz Vision, MS Office 97 suite), however, when I go to run the java application is crashes and a Dr Watson Access Violation in java.exe error is generated.
    I have:
    1. Reinstalled the JDK 1.2.2.
    2. Confirmed that all hardware drivers (new NIC, Video and Sound Card) were updated with the appropriate versions from the hardware suppliers web pages.
    3. Read thru previous posts on this site (and others) for similar errors, but have only been able to find similar questions.
    4. Lowered the video card display colours to 256 rather than 65,536.
    None of the above have made any difference.
    I hope this question will prompt the java/Dr Watson gurus out there to help me resolve this frustrating problem.
    Thanks in anticipation.
    Greg

    Consider getting 1.2.2_014, or whatever is the latest version of 1.2.2. I think there were some issues with Pentium IV processors which were fixed in one of the later incarnations of the JDK.
    You can get the latest version of 1.2.2 from the following url:
    http://java.sun.com/products/jdk/1.2/download.html

  • Access violation (0xC0000005) at EIP=0x0534BABC when launching Exe

    Hi All,
    I am facing "Access violation (0xC0000005) at EIP=0x0534BABC" issue when I tried to launch my exe. Earlier versions of the exe were running fine until I added Email notification features using .net SMTP APIs and built it again. 
    System,
    Development and Deployment systems are different. I am able to run source code on both systems and Exe on Developement system. But exe is not working in Deployment system.
    Exception,
    I have attached the sanpshot of crash report pop-up and Log Report of the exception.
    Please help!
    Anandelamaran Duraisamy,
    Senior Project Engineer,
    Soliton Technologies (P) Ltd,
    www.solitontech.com
    Attachments:
    Crash Report.png ‏11 KB
    Crash Report.zip ‏19 KB

    Additional details,
    When I tried "Run as administrator", I could see the exe icon on the task bar for few seconds then it disappears. It basically fails to launch, also I don't get any error message. 
    The Exe is created in development PC which runs 64 bit Window 7 and 32 bit LabVIEW. The deployment system has 32 bit Windows 7 and 32 bit LabVIEW. I hope it doesn't matter as far as my LabVIEW installations are 32 bit in both systems.
    Anandelamaran Duraisamy,
    Senior Project Engineer,
    Soliton Technologies (P) Ltd,
    www.solitontech.com

Maybe you are looking for