Access WiFi on Q10

I resolved the problem to access WiFi with Q10.
The problem is SSID. My SSID has some blanks and Korean language. However it is strange to me because I don't have any problem with 9900.
Why Q10 is behind 9900? I think that it is necessary for Q10 to be improved.

Hey kionabird,
Thanks for the question. After reviewing your post, it sounds like you are having an issue with Wi-Fi on the iPad. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Wi-Fi networks and connections
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap  and Forget this Network.
Try to connect to your desired Wi-Fi network. Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. 
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Similar Messages

  • Getting quite frustrated with my iPhone 4S.  Can't access WIFI and/or Bluetooth nor will my computer allow it to be a "hotspot" unless physically tethered to computer.  It started acting up after download....it also has messed up some app

    I've only had this phone since Sept. and have already had to have the speaker replaced.  NOW I can't access wifi and/or bluetooth (both are grey).  I can't use the Personal Hotspot either (and the passcode no longer shows up).  I can only access internet via the phone through the USB.  This started over the past few days (and after I updated to IOS).
    Some of my apps no longer work either...over 100+ hours of audiobooks on Audible can't be accessed as the Audible app just shuts off.
    Any recommendations on how to recify?   I'm pretty rural so downloaded anything takes going to the next town over to get a signal from the library...  and all of my searching is eating into my 5gb limit through ATT....so it is a bit irritating

    called Apple Care this a.m....new upgrade on 12/31/12 is supposed to fix the "bug"

  • HT4199 Need to access WiFi via PC. How to connect IPad to PC tower? Is an adapter part needed?

    Need to access Wifi via PC. How to connect IPad to WiFi via PC Tower? Ia an adapter needed? Any help is appreciated.

    To what purpose?
    If you are trying to share internet connection-you need to enable that in the OS on the computer.

  • Can't access wifi

    My new phone can not access wifi.  It is impossible to turn on wifi, the controls are greyed out and don't respond.

    Thanks,
    Your suggestion worked for me!
    My choices weren't greyed out, and my wife was able to connect her iPhone5.

  • Satellite P100-221 - How can I access WiFi networks?

    I have a P100-221.
    I want to access WiFi networks.
    I dont know how to do it. Which driver should I install?
    Any help please?
    Regards
    Nevzat

    Hello
    If Windows recognize a WiFi network you can access and normally you will need a password. If you know this, you have access to the network.
    Furthermore WLAN must be enabled with the WiFi switch on the notebook and by pressing FN+F8.
    For this its not necessary to install a driver but if you need a driver you can find it on the Toshiba website.
    I think you should look in the user manual. There you can a lot of informations about your notebook and informations how to access to a WiFi networks.
    Sometimes its very useful the user manual.
    Greets

  • HT1365 Hi I have Imac 5 processor and I guess installed Lion I am having difficulty with Wifi connection. Sometimes after shut down number of times still does not access wifi or if it does I can see wifi bar on iMac but can't open any webpage. Please help

    Hi everybody,
    I have Imac 5 processor and I guess installed Lion I am having difficulty with Wifi connection. Sometimes after shut down number of times still does not access wifi or if it does I can see wifi bar on iMac but can't open any webpage. Please help
    Thanks

    Hello:
    There was an OS X 10.7 update released a month or so ago that fixed this problem.  Run software update.
    Barry

  • I brought my ipad2 from Canada to Thailand,and put a sim card in to access wifi or 3 g, but cannot access internet is there anything I can do to fix this?

    I brought my ipad2 from Canada to Thailand and put a sim card in to access wifi and 3g, but I cannot get on the internet,is there anything I can do to fix this?

    Two things:
    1. Make sure the SIM card is enabled for data.
    2. Make sure you are using the correct APN settings, in Settings - Cellular Data.

  • I smashed my IPAD glass and after having it repaired I am no longer able to access wifi unless I am right next to my router.  Has anyone else had this experience and what is solution?

    I smashed my IPAD glass and after having it repaired I am no longer able to access wifi unless I am right next to my router.  Has anyone else had this experience and what is solution?

    Given the complexity in merely getting the thing open, that is likely. Or they forgot to reconnect it. See #14  and from #52 on down in: http://www.ifixit.com/Guide/Installing+iPad+2+GSM+Bluetooth-Wi-Fi+Antenna/6166/1

  • TS1398 The WEP password to access WiFI from Time Warner is 12 numbers and letters plus 14 zeros.  Can I expand the available space in the space for entering passwords

    The WEP Password to access wifi from Time Warner cable is 12 numbers and letters followed by 14zeros.  The available space to input password is unequal to the task?  Time Warner advised to call Apple.  Any one with a suggestion on how to either 'customize' WEP or expand available password input space?  Better ideaS?

    wjosten - I was using a WEP password of greater than 13 characters with no problem.
    Mondayblues - Are you saying that you cannot set your own password for your router/modem? You should be able to access it from an ethernet connected computer and change the password to suit yourself.  If it's not more than about 4 years old, you should be able to use WPA instead of WEP, which is much more secure.  Google "time warner modem  yourmodel" to find the user manual and the URL to access the modem.

  • Is anyone having problems accessing WIFI with their iPhone

    Just noticed that yesterday I can't access WIFI with my iPhone 5s.  Happened at my office and at home.  WIFI works both places as Macbook works.  Anyone else finding this ?

        I don't wnat you to have any issues with your device, tracybayne! Let's get to work to make sure we get you up and running. Have you been able to try to reset the network settings in your phone? The best way to do that is to go into Settings, General, Reset, Reset Network Settings. The phone will power cycle and then you will need to re-type in all the wi-fi passwords again. Once that is done, please re-test it out. Keep us posted.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • I am in Singapore and have a Starhub prepaid SIM card. I cannot access wifi although it is visible on my network list. Do you now if I have to change any settings?

    Hi, I am in Singapore and have a Starhub prepaid SIM card. I am a Verizon (US) customer but want to access WiFi. My device shows being connected but I cannot access wifi. Do you know if I have to change any settings to access wifi on a SIM card?

    hi, this thread already deals with the issue:
    How can I prevent getting calls from number that are not in my address book?

  • Can,t access wifi via airport after left my mbp idle for just 1 minute

    i can,t access wifi via airport after left my mbp idle for just 1 minute, i need to turn airport off & turn airport on if i left my mbp idle for just 1 minute or less...why this thing happen? anyone can help thanks in advance

    Something that came to mind after rereading you post relates to the particulars of a "hard" reset on the Snow.
    A “hard” reset removes current setting from the base station. You must then connect to the base station using the AirPort Admin Utility and upload AirPort 2.0 or later software to return the base station to its default settings. A base station in a hard reset is only accessible through the LAN port, not via wireless connections ... so attempting to access with the AAU, via a wireless client, will not work.
    The following is the process to reload the AirPort software: AirPort Base Station (Dual Ethernet) : How to reload software from Mac OS X

  • IPhone 4 cannot access wifi from airport

    Both my girlfriend and I have iPhone 4's. We cannot access wifi from my personal home airport. When we go to log into wifi and we type in the password, we receive a prompt saying, "Incorrect password for....". I am writing this on my MacBook, logged into my wifi, with the same exact password???????
    I've tried everything. Resetting iPhone, MacBook, and Airport. I also tried resetting my password and resetting the network settings. I don't know what else I could possibly do. It's frustrating because my girlfriend is on a data plan and can't utilize our wifi. 
    Any ideas???????

    outdated wifi router wifi most likely

  • My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

    My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

    My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

  • Airport Extreme unit will not allow Windows devices to access WiFi

    For the last 10 or so days, my Airport Extreme unit will not allow Windows based devices to access WiFi (ASUS laptop and Nokia Windows Phone). Our Apple devices have no issues (MacBook Pro, iPad, iPhone, iPod). Settings were not changed but there may have been a program update? Have tried resetting without success. Today I tried to bypass the problem by creating guest network access - my MacBook Pro can access the guest network, but again, the Windows-based devices can't log in.
    Airport packaging stipulates that this product will service both Apple and PC products. I'm stumped and this is a bit of an issue as my wife's PC has been cut off from the Web as well as my Windows phone. This Airport unit is fairly recent having been bought August or September of last year - so a recent purchase, but to get Apple assistance it appears I'd need to purchase service ticket... (Am using Mountain Lion 10.8.4 and Extreme 5th Gen.)
    Is there an easy solution?

    No software updates available.
    Found a Network Options checkbox which blocked IPv6 connections in Airport Utility. Unchecked it, that didn't change anything, so I've returned it to its original setting. But under Internet Options, Airport is set to allow IPv6 connections. Strange that this unit would have settings that appear to contradict each other.
    There was an access control panel - but to grant control here, I'd need an Apple address which my Mac would have but which the Windows devices would not, so that setting couldn't be used to address this problem.
    So, no solution to the issue that I can see.

Maybe you are looking for

  • How do you solve issue of reports timing out with SSRS (2008 R2) Report Manger?

    When trying to access reports through Report Manager we get an error: An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. (rsReportServerDatabaseError) Timeo

  • Deleting data from EDPAR table

    hi  everyone,                            I need to delete data forom table EDPAR. two conditions are there. Once through first radio button in selection screen based on values of kunnr selected from select options. In the second case. if i select the

  • I have a MBP 5.1 and I get the following kernel panics:

    MBP 2,4 GHz Intel Core 2 Duo, 8 GB 1333 MHz DDR3 ram and I am running Maveriks and eversince I have upgraded to Maveriks I have kernel panics. I have deleted a few apps that cause some of the panics and it seemed to solve it for a day or two. But I a

  • How to create a .exe script to start and stop Oracle EBS R12 in Linux

    Hello, I have installed Oracle EBS R12 in Linux enterprise through Virtual box on windows 7 professional. It takes a long time to start and stop EBS as I have to start and stop the scripts manually - can someone please help me with the following (I h

  • EAP-TLS Authentication failure happening in ACS for Wireless End User Authentication

    Hi All, We have the Win 3.2 ACS setup in the production environment, We are migrating it with 4.2 Appliance version. We have succesfully migrated the database and other stuffs from 3.2 to 4.2. Same way we have exported the certificates from 3.2 to 4.