ACCESS with PORTAL

Hi All,
Can we integrate an ACCESS application with Oracle Portal? If so, can any one guide me through the process?
Thanks
Raj

From web.xml ..
<servlet-mapping>
<servlet-name>AppManagerServlet</servlet-name>
<url-pattern>/appmanager/*</url-pattern>
</servlet-mapping>
Cheers
Dennis
Karthi wrote:
Sorry Chris,
I don't get you.
What do you mean "any thing" also ?
How do we manage the appmanager URL mapping in web.xml ?
Please explain in bit detail
Thanks,
Karthi.
"Chris Jolley" <[email protected]> wrote in message
news:4086f3f3$[email protected]..
you can use either one in production. .portal files are not just fordevelopment
the only difference is your end users or admins cant customize them
as far as the long urls, are you worries aboutwebappname/appmanager/portalpath/desktopath
being too long?
Some things that might help
-you can make your webapp name anything you like
-appmanager can be anything also just change your web.xml
-portal path can be anything also,
-desktop path you can get rid of by specifying a URI for the portal thatjust
forwards you to
a default desktop.
"Karthi" <[email protected]> wrote:
Hi all,
As of docs, I came to know that the portal can be access by .portal file
during the development.
And using appmanager in producation . Is my understanding right?
If so, what is the recommended way to manage the long urls?
I mean to ask how efficiently we can use the PathTrim directive of apache
to
achive this.
Or is there a better way.
Thanks,
Karthi

Similar Messages

Oracle9iAS R2 - Virtual Hosts with Portal and SSO with OIDDAS application

Hi!
I have installed a the machine with name minsk.discover.local. The machine have installed Infrastructure and Portal. The instalation is sucessfull and i work fine. But i have publish Portal to WEB with name intranet.discover.com.br. The Oracle describe:
1 - Create the virtual hosts in SSO and PORTAL - OK
2 - run ptlasst to create SSO Partners Applications - OK
After this steps iwork fine with Portal and SSO, but when i click in portlet to create user to access the application OIDDAS, the Portal redirect to login page of SSO in address mct.com.br, the internal name, when then name not responde in the internet.
I need a help!!!!
Marcio Mesti

I just spoke to the Oracle App server admins, the two servers in question are clustered.
So my question changes slightly to:
What is the best way to install and configure a webgate for clustered Oracle App servers with mulitple virtual hosts, that are residing behind a load balancer (Traffic Manager)?
Thanks,
Andy

How to restrice ananymous user access to portal link /irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.default?

Hi experts,
We had an issue with portal access. I wonder if portal is venerable for security threats?
Could you please let me how to restrict the unauthorized users (anonymous user) to the portal URL.
https://HOST:50001//irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.default .
Appreciate your help.
Regards
Maruti

Hi Maruti,
Hope you are doing good.
Can't you just amend the portal permissions so that this access is not possible.
The PCD location should be:
com.sap.portal.system/security/sap.com/NetWeaver.Portal/no_safety/com.sap.portal.navigation.portallauncher....
Hope this helps.
Thank you and have a nice day!
Kind Regards,
Hemanth

Can't access to Portal Admin Console.

Hi all,
I'm working with WLP 10.2. I've created the ear-file (using maven) and deployed it on server (with Unix-system). The current application works well.
My current task is a creation portal in streaming mode. Unfortunately I can't access to Portal Admin console for resolving task. I always retrieve "Error 404 (Not found)".
As I know the admin-tools.war is responsible for Portal Admin Console. I've checked admin-tools.war is running on server (with status "Active").
I'm using the next path for running Portal Admin Console: {serverhost:port}/{context root of admin-tools}/portal.portal.
Maybe, Should I set up(correct) application.xml or weblogic.xml?
Please let me know if you have any ideas.
Thanks,
Yuriy

I think your URL is wrong, try with the following...
http://{server:port}/{name_your_ear}Admin/portal.portal
name_your_ear= The name of your Enterprise Application.
For example,
http://localhost:7001/DemosEarAdmin/portal.portal
I hope this helps

How to access Sap portal login user in ejb web service

Hi,
I wnt to access SAP Portal login user in my ejb application which resides on the same server.
I am using following code
try {
     IUser user =null;                         IWDClientUser wdUser = WDClientUser.getCurrentUser();
                              user = wdUser.getSAPUser();
                         } catch (WDUMException e) {
                              // TODO Auto-generated catch block
                              e.printStackTrace();
Some additional jar files are required for this?
The same code works fine with webDynpro but not with ejb.
Thanks in advance
Best regards,
Nilesh

Thanks for reply.
I have already added com.sap.security.api in my EJB module project classpath. How to add the same in EJB application Project (application-j2ee-engine.xml)?
Best regards,
Nilesh

SAP NW CE 7.1: Sign-on to R/3 backend with Portal User

Hello,
I have create a an Application Service. There I have imported some RFC and created some operations to read data from the R/3 backend and write in R/3 backend.
I have created an other Development Component. It's a EJB Module. With EJB invocation I get access to the Application Service.
The next step is to use the EJBs with Web Dynpro with the an EJB Model Import.
Now my questions:
How can I realize that this user who sign on in portal and excute the Web Dynpro Application also sign on at R/3 backend. In NWA at Destinations I changed the Logon Data--Authentication from Technical User to Current User (Logon Ticket).
Now I get the following exception:
java.lang.IllegalStateException: No SAP logon ticket found for destination TDE.
I execute the methods of the EJB in a test-class via JDNI-lookup.
How can I create a logon ticket for my destination?
Do I have "only" to follow the instructions here for http://help.sap.com/saphelp_nwce10/helpdata/en/4d/dd9b9ce80311d5995500508b6b8b11/frameset.htm for Scenario 1?
How can I deliver CAF the userid and password?
I implemented a test-class where I use the EJB of the EJB Module. How can I give CAF the userid and password of an PortalUser?
Redards,
Armin

Hi Armin,
Unfortunately, I cannot answer your question about logon tickets. But regarding user propagation to the CAF Application Service:
When you access the Portal / WD app, you authenticate with some user. The latter is automatically propagated to the EJB in the EJB module and then to the EJB implementing the CAF service. So, you don't need to do anything explicitly.
HTH!
-- Vladimir

What's the right way to start up with Portal's dev?

Hi to all Portals experts,
I am really struggling to start up learning Portals and more specific their development.Here is the problem - I am a bit new in the NetWeaver but not new in J2EE environment. I went trough all WebDynpro tutorials and really the documentation was written nice.Good hands-on approach with lots of examples and that is what I found with WebDynpro - everything well explained step by step.
But when I started the Portals Tutorials I was a bit disappointed.
1.First of all, there is no explanation which tools one needs to start up with Portal Dev?
I only have SAP Netweaver Development Studio SP15 installed on my PC and I dont have any access to R/3, CRM or other system. Is this enough to at least start to learn Portal Development or not?
2. I realize well that at some point I will need real system to play with but , until than what useful practice I can do on my own and how?
- Even within the WebDynpro tutorial , the very first Part : Define a system - (http://help.sap.com/saphelp_nw04/helpdata/en/cb/f4bc3d42f46c33e10000000a11405a/frameset.htm) -In the portal, navigate to System Administration - System Configuration - System Landscape
Which Portal ? I dont have System Administration on my NWDS SP15?Is is something I should install?unclear?
3. My understanding is that NWDS SP15 contains EP , within its J2EE local engine , but is this EP.6.0, is this enough to develop complete Portal Application A-Z or not - unclear ?
4. PDK. Somewhere I read that Portal Application can be developed with either WebDynpro or with PDK. Ive read about PDK but It is not clear if it is Dev Kit as its name says , should it be downloaded , installed or imported into NWDS, again? And bottom line do I need PDK as a Portal Developer, and at which point?
I only need the starting point for Portal Develop. or some guide that should set milestones 1st ,2nd .. I would prefer the hands-on approach. If some of you has already taken this path and can help me with your directions, links, at least how to get started, I will highly appreciate it! Thanks in advance!Regards, Bob

Hi Bob,
The below reply is as per my experience with Development so far:
1> It is not necessary to have access to R/3 or any other SAP/non SAP application unless you are writing an application in connection to them.
Example: An application which is reading data from R/3 and displaying the same in a table. Yes, in this scenario you would require access to R/3.
2> System Administration is a role just like Home, User Administration, etc in Portal itself.
It contains all the configuration related to System Landscape, Knowledge Menegement, etc
If in case you have not been given this role, you may ask your System Administrator to create the required system (PCD Object). You may then use this system from your Profile (Personalize Portal) link directly.
3> NWDS resides over Portal so you may create your own standalone application or application thats talking to the underlying Portal.
WebDynpro is used to create UI & likewise you may build Web applications or EJB applications.
4> PDK stands for Portal Development Kit. YUou may ask your administrator to download and assign the same to you. This would appear as a "Java Developer" named role in your portal. It contains all APIs required for Java development.
If you do nto have this, you may still use the Javadocs provided on SDN itself.
Depending what custom developmetn you do, depending upon the type the .par (portal archieve), .ear (Enterprise archieve), .war (web archieve) needs to be deployed in portal, so that users may access/view the custom created data.
Hope this helps
All the best!
Warm Regards,
Ritu

Urgent: cannot access the portal home page because of problems language

I have installed Oracle 9iAS, including infrastructure with language FRENCH_FRANCE.WE8ISO8859P15 and portal and wireless type I dont have problem for access to http://machine:1810 and http://machine:7779 in French.
But when I access this url: http://machine:7779/pls/portal, there is a error : java.io.IOException:
Unsupported character encoding: "ISO-8859-15"
at oracle.webdb.page.BaseContentRequest.getResponseJavaEncoding(Unknown Source)
at oracle.webdb.page.BaseContentRequest.getReader(Unknown Source)
at oracle.webdb.page.PageBuilder.getMetaData(Unknown Source)
at oracle.webdb.page.PageBuilder.process(Unknown Source)
at oracle.webdb.page.ParallelServlet.doGet(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:244)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
When I install infrastructure, I select FRENCH_FRANCE.WE8ISO8859P15. I check in sql*plus in the v$NLS_PARAMETERS and NLS_LANGUAGE is FRENCH, NLS_TERRITORY is FRANCE, NLS_DATE_LANGUAGE is FRENCH and NLS_CHARACTERSET is WE8ISO8859P15. It seems all well.
But I check in the Windows registry, I find that NLS_LANG is FRENCH_FRANCE.WE8MSWIN1252 under under HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE/HOME1 and HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE/HOME2. Then I correct in FRENCH_FRANCE.WE8ISO8859P15 in the Windows registry.
Also I check in EM web_site in
To check the DAD settings, in my EM Console, I go to Http Server/PLSQL Properties/DAD status. I correct NLS Language with FRENCH_FRANCE.WE8ISO8859P15.
Also I correct langinst.cmd under OH/portal/admin/plsql to replace WE8MSWIN1252 with WE8ISO8859P15
case f:
setenv NLS_LANG FRENCH_FRANCE.WE8ISO8859P15
breaksw
case frc:
setenv NLS_LANG FRENCH_FRANCE. WE8ISO8859P15
breaksw
All that I do is not useful for access the portal home page, thers is always the error java.io.IOException: Unsupported character encoding: "ISO-8859-15"
I dont have problem in language English. My page portal is running well in a another machine where I install Oracle9iAS in English, but I have always problem in the machine where I install Oracle9iAS in French.
I find there are lots of this problem in this forum, but there isnt a answer. So thanks for anyone to resolve this problem.

Hello Michael,
Thanks for your help !
I think that the problem is in the PlsqlNLSLanguage. But I couldnt check it now with the version French WE8ISO8859P15, because today Ive installed oracle902 AS with WE8MSWIN1252 and it functions well. I find the PlsqlNLSLanguage in my $ORACLE_HOME_INFRA/Apache/mod_plsql/conf/dads.conf is FRENCH_FRANCE.WE8MSWIN1252
, and in my $ORACLE_HOME/Apache/mod_plsql/conf/dads.conf is AMERICAN_AMERICA.WE8MSWIN1252. But I dont understand why it doesnt create the languages problem.
I will try again in another machine with WE8ISO8859P15.

Not able to access the portal on the network - (RedHat Enterprise Linux 5).

Friends,
I have installed the portal(7.1) on a linux(RHEL 5) box.I am able to access the portal locally and everything looks fine.
However when I try accessing the portal on the network...I get "page cannot be displayed" as if the server is not listning on 8080.
when I do "GET http://rexportal.davita.corp:8080" I get ........
500 Can't connect to rexportal.davita.corp:8080 (connect: No route to host)
what does this mean?
other info:
1) I have disbaled the firewall by setting SELinux to disabled.
2)I am able to traceroute to the m/c
3) can ftp and SSH
4) When I do "GET http://rexportal.davita.corp" I see a apache server page.It means apache server is accessible at port 80 on the network.
Can you plz help me resolve this issue.what can prevent my server not being accesible across the network
Thanks!!
Deepak.

I was able to resolve this.! basically It was a firewall issue.
To help othere here is what I found.
I had disabled the SELinux utility which should have basically disabled the firewall service but It didnt stop it.
You can check If the firewall is running with following command on redhat linux.
service iptables status
If it is enabled ,you can either stop it by
/etc/init.d/iptables stop (not recommended -- for security)
or
you can add a entry for the port you want to enable by modifying the file
/etc/sysconfig/iptables
Hope it might be helpful !
Thanks,
Deepak.

Ise 1.2, cannot access guest portal

I upgraded from 1.1.4 patch 3 to 1.2 but cannot access guest portal anymore nor with FQDN:8443 nor with IP:8443
any idea?

I had attached the steps to configure the guest portal and hope will address the problem.
Configuring the Guest Portal
Adding a New Guest Portal You must configure settings for the Guest portal before allowing guests to use it to access the network. Some settings apply globally to all Guest portals and other require you to set them for each portal individually.
You can add a new Guest portal or edit an existing one.
Step 1Choose Administration > Web Portal Management > Settings > Guest > Multi-Portal Configurations.
Step 2Click Add.
Step 3Update the fields on each of these tabs:
•General—enter a portal name and description and choose a portal type.
•Operations—enable the customizations for the specific portal
•Customization—choose a language template for displaying the Guest portal with localized content
•File Uploads—displays only if you have chosen a portal type requiring you to upload custom HTML files.
•File Mapping— identify and choose the HTML files uploaded for the particular guest pages. Displays only if you have chosen a portal type requiring you to upload custom HTML files.
•Authentication—indicate how users should be authenticated during guest login.
Step 4Click Submit.
Specifying Ports and Ethernet Interfaces for End-User Portals
You can specify the port used for each web portal allowing you to use different ports for the end-user portals: Sponsor, Guest (and Client Provisioning), My Devices, and Blacklist portals. The Client Provisioning portal uses ports 8905 and 8909 for posture assessments and remediation, which you cannot change. Otherwise, it uses the same ports assigned to the Guest portal.
You can also partition portal traffic to specific Gigabit Ethernet interfaces. For example, you might not want the Admin portal (which always uses GigabitEthernet 0) available on the same network as guest users or employee devices.
Step 1Choose Administration > Web Portal Management > Settings > General > Ports.
Step 2Enter the port value in the HTTPS Port field for each portal. By default, the Sponsor, Guest, My Devices portals use 8443, and the Blacklist portal uses port 8444.
Step 3Check the Gigabit Ethernet interfaces you want to enable for each portal.
Step 4Click Save.
If you have changed the port settings, all nodes (Administration, Policy Services, and Monitoring) restart automatically, which may take several hours to complete.
Tips for Assigning Ports and Ethernet Interfaces
•All port assignments must be between 8000-8999. This port range restriction is new in Cisco ISE 1.2. If you upgraded with port values outside this range, they are honored until you make any change to this page. If you make any change to this page, you must update the port setting to comply with this restriction.
•You must assign the Blacklist portal to use a different port than the other end-user portals.
•Any portals assigned to the same HTTPS port also use the same Ethernet interfaces. For example, if you assign both the Sponsor and My Devices portals to port 8443, and you disable GigabitEthernet 0 on the Sponsor portal, that interface is also automatically disabled for the My Devices portal.
•You must configure the Ethernet interfaces using IP addresses on different subnets. Refer to these guidelines to help you decide how best to assign ports and Ethernet interfaces to the end-user portals:
Specifying the Fully Qualified Domain Name for Sponsor and My Devices Portals
You can set the Sponsor and My Devices portals to use an easy-to-remember fully-qualified domain names (FQDN), such as: mydevices.companyname.com or sponsor.companyname.com. Alternatively, Cisco ISE also supports wildcard certificates to address certificate name mismatch issues. You must configure DNS to resolve to at least one policy services node. If you have more than one policy services node that will provide portal services, you should configure high availability for the portal. For example, you could use a load balancer or DNS round-robin services.
Before You Begin
Step 1Choose Administration > Web Portal Management > Settings > General > Ports.
Step 2Scroll to the Portal FQDNs section, and check the appropriate setting:
•Default Sponsor Portal FQDN
•Default My Devices Portal FQDN
Step 3Enter a fully qualified domain name.
Step 4Click Save, and all nodes (Administration, Policy Services, and Monitoring) restart automatically, which may take several hours to complete.
Step 5Configure the network DNS server so that it resolves the FQDN to the Sponsor or My Devices portal nodes. You must also update DNS to ensure the FQDN of the new URL resolves to a valid policy service node IP address. Additionally, to avoid certificate warning messages due to name mismatches, you should also include the FQDN of the customized URL in the subject alternative name (SAN) attribute of the local server certificate of the Cisco ISE policy service node.

Solman Document Access thro portal

hi
I wanted to know if we store the documents on SOLMAN, can they be accessed using portal.
if yes may i know how

Dear Anil
We have a standard functionality of solman with which we can access solman documents
For e.g goto properties of doc in solar01 or 02 then click Generate URL
this will generate a URL and copy to clipboard and then press control+v to paste in explorer the doc can be accessed from anywhere with authentication
Note you need to have activate SICF solmandocument service for this.
Hope it solves ur prob.
Regards
Prakhar

Anonymous access with named users

Hi!
I am trying to set up anonymous access with named users on EP6 SP9. I am using Database only as UME Data storage. I have applied the note #728106, since most of the content is html-pages on the KM.
I defined the UME settings ume.login.guest_user.uniqueids=anon01,anon02
ume.login.anonymous_user.mode=1
Restarted the server and attached user account into roles (which contain only anonymous content).
I then accessed the page /irj/portal/anonymous (or the longer version /irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.anonymous) and everything was fine. However I wasn't able to get the portal working with /irj/portal/anonymous?j_user=anon02. I always received Portal runtime error. From the logs I saw that the portal tried to access as user anon01.
When I changed the UME settings into
ume.login.guest_user.uniqueids=anon02,anon01
I was able to get the anon02 user account working, but not /irj/portal/anonymous?j_user=anon01. From the logs I saw that the portal tried to access as user anon02.
Both user account are using the same rule, portal desktop and framework page. I can see the correct (and different) TLN for each user only in the content are I see this error.
Any ideas?
Thanks,
Petri

I need to switch between two named anonymous users.
It works fine using http://<server>:<port>/irj/portal?j_user=<first_Guest_user>&j_password=<pwd_of_first_Guest_user>&login_submit=true
Then to switch to the other user I must do a log-off or close the browser and input the other url http://<server>:<port>/irj/portal?j_user=<second_Guest_user>&j_password=<pwd_of_second_Guest_user>&login_submit=true
I developed a servlet to switch the users using IAuthentication (method forceLogoffUser) and then redirect to the respective url. But when I call forceLogoffUser method I get a login screen and the script stop executing. Passing 'returnURL' parameter did not work.
Parameters:
req - HttpServletRequest
resp - HttpServletResponse
returnURL - url to use to logon again.
Is there a way to switch automaticaly between the two named anonymous users?

Issues with portal integration of Web dynpro for ABAP application

Hi,
I have the following issues when i integrate a Web Dynpro for ABAP application with portal.
1. the iview does not contain some images, such as table scroll button images, maximize and close buttons of popups etc.
2. the iview loads properly, but there is an error in the status bar that says "Access denied"
3. is it possible to do absolute navigation from
   role1->folder1->iview1 to role1->folder2->iview2?
   when i fire this navigation from the webdynpro
   application, the navigation does not happen in the
   portal.
thanks,
Kavitha

>
sridhar vadaga wrote:
> Hi Experts,
>
>
> CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
>   EXPORTING
>     text           = url
> IMPORTING
>    BUFFER         = content .
>
>
> Thanks & Regards
> Sridhar
I think you are overestimating the power of the SCM_STRING_TO_XSTRING function module. By supplying a URL as the value of the input text, it isn't going to magically go read the content from the remote location and convert that to a binary string. It is going to take whatever value you supply in th importing TEXT parameter convert that to binary. In other words it is literally converting the string http://xxx/test.xls to binary. You will need some other mechanism to read the content from the remote location into ABAP memory before you can process it. You will need to use the CL_HTTP_CLIENT class or call some sort of web service to retrive the content.

Issue with session management with portal 701 AFP

Hi portal experts,
We are facing an issue with one of our portal 7 ehp1 running the AJAX framework pages.
When logging off, the DSM popup is shown and it disappears. However, the backend sessions are kept alive when we look in transaction SM12, which indicates that the backend session has not been closed (proven in transaction SM04)
The same issue arises when closing a popup window. In this case, no DSM popup is shown and the sessions are maintained as well.
Popup blockers are disabled
Portal url and backend url are in the trusted sites collection
Does this have something to do with the AJAX framework?
Does anyone have any pointers for us?
Thanks in advance!
Regards,
Luk

Hi Tom,
I already came across this note earlier. Currently I'm unable (not allowed) to install the httpwatch utility.
To add to the complexity, web dispatchers are used to access the portal and used between the portal and the backend systems. If I understood correctly, we need to have the ABAP Security Sessions Enabled setting turned on in this sort of landscape. Is this correct?
If it is not required, couldn't we just turn off this setting?
Thanks in advance!
kr,
Luk

No FIM administrator...cannot access the portal

Somehow my user object who has FIM admin rights got removed. How do I resolve this?
TSTADMIN/adminfim is my user who is site collection administrator. This user was a part of SET Administrator.
Permission MPR 'Admin can do anything' used this set as requet resource to allow all access on FIM portal.
This user object is somehow removed and I do not have a single user who has FIM portal admin access. (I know the user is removed as I could search portal for users with another user who has limited access)
If I try to access FIM portal using this user..I get below error
[ServiceFaultException: The endpoint could not dispatch the request.] Microsoft.ResourceManagement.WebServices.EnumerationClient.Enumerate(Message request) +226 Microsoft.ResourceManagement.WebServices.EnumerationClient.Enumerate(Enumerate
enumerate, EnumerateHelper helper) +242 Microsoft.ResourceManagement.WebServices.Client.ResourceTemplate.EnumerateResources(SearchParameters parameters) +782 [UnwillingToPerformException: The endpoint could not dispatch the request.] Microsoft.ResourceManagement.WebServices.Client.ResourceTemplate.EnumerateResources(SearchParameters
parameters) +1457 Microsoft.IdentityManagement.WebUI.Controls.ConfigurationModelBase.RetrieveResources(String type, String filter, List`1 attributes) +499 Microsoft.IdentityManagement.WebUI.Controls.UserConfigurationModel.RetrieveUserConfiguration()
+536 Microsoft.IdentityManagement.WebUI.Controls.NavigationBarConfigurationModel.get_NavigationBars() +148 Microsoft.IdentityManagement.WebUI.Controls.NavigationBarProvider.BuildSiteMap() +242 Microsoft.IdentityManagement.WebUI.Controls.NavigationBarProvider.get_RootNode()
+13 System.Web.UI.WebControls.SiteMapDataSource.GetNodes() +231 System.Web.UI.WebControls.SiteMapDataSource.GetTreeView(String viewPath) +35 System.Web.UI.WebControls.HierarchicalDataBoundControl.GetData(String viewPath) +43 System.Web.UI.WebControls.Menu.DataBindItem(MenuItem
item) +53 System.Web.UI.WebControls.Menu.PerformDataBinding() +49 System.Web.UI.WebControls.HierarchicalDataBoundControl.PerformSelect() +114 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.Menu.EnsureDataBound()
+38 System.Web.UI.WebControls.Menu.OnPreRender(EventArgs e, Boolean registerScript) +64 Microsoft.SharePoint.WebControls.AspMenu.OnPreRender(EventArgs e) +166 System.Web.UI.Control.PreRenderRecursiveInternal() +108 System.Web.UI.Control.PreRenderRecursiveInternal()
+224 System.Web.UI.Control.PreRenderRecursiveInternal() +224 System.Web.UI.Control.PreRenderRecursiveInternal() +224 System.Web.UI.Control.PreRenderRecursiveInternal() +224 System.Web.UI.Control.PreRenderRecursiveInternal() +224 System.Web.UI.Control.PreRenderRecursiveInternal()
+224 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3394
Event viewer gives me this error:
Requestor: Internal Service
Microsoft.ResourceManagement.Service: Microsoft.ResourceManagement.WebServices.Exceptions.UnwillingToPerformException: Exception of type 'Microsoft.ResourceManagement.WebServices.Exceptions.UnwillingToPerformException' was thrown.
   at Microsoft.ResourceManagement.WebServices.ResourceManagementService.GetCurrentUserFromSecurityIdentifier()
   at Microsoft.ResourceManagement.WebServices.ResourceManagementService.GetCurrentUser()
   at Microsoft.ResourceManagement.WebServices.ResourceManagementService.Create(Message request)
Please assist.

Is the User object for the account deleted or is it just missing attributes? (Like objectsid)
If you've deleted the object completely, then there's no easy way to get it back - you've effectively locked yourself out of the portal.
https://social.technet.microsoft.com/Forums/en-US/e7d149f2-1fa4-4b2a-8177-67c026978b89/builtin-administrator-account-deleted?forum=ilm2
If you just need the object guid, try this post
https://social.technet.microsoft.com/Forums/en-US/6ab2fbeb-2877-424c-989c-6ddaac1b0df6/how-to-recover-objectsid-fim-admin-and-builton-synchronization-user?forum=ilm2
Sorry for the bad news

ACCESS with PORTAL

Similar Messages

Maybe you are looking for