Access wlc froma network defined on the wlc

Hi Guys,
i have a wlc 2504 with 7.6.130
My management ip address is 192.168.1.1/24 and i have an interface on the wlc with ip address 192.168.2.1
From a PC(wired) with ip address 192.168.2.x (network are routed) i cannot access https://192.168.1.1 when i configure on the wlc an interface with ip address 192.168.2.1
It's look like i cannot access wlc from a network defined on the wlc.
Can you help me in resolving this issue?

That is by design. The WLC does not allow access from a configures interface other than management by default.
If you need to access the WLC from a configures interface other than management you need to issue the command:
config network mgmt-via-dynamic-interface enable
HTH,
Steve

Similar Messages

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

HT201272 I'm having trouble downloading a previously purchase song to my iCloud so I can access it from another device. The iCloud download button is not there. Help?

I'm having trouble downloading a previously purchase song to my iCloud so I can access it from another device. The iCloud download button is not there. Help?

I agree. I don't rely on iCloud as a backup, that is what I have my portable hard drive for. Its 500 GB so I can hold my entire iTunes library several times over on it. I have all my movies on my hard drive, but somehow "The Mist" got deleted off of my hard drive, so I figured "Well, the option to redownload an already purchased movie is available through iCloud, I'll just do that!"
And permissions and download availability have nothing to do with it, the movie's still there, it still allows me to redownload it. The only problem is when I click download, I get that message.
And nobody else uses my computer, but I do have multiple accounts authorized on it. Even still though, I am attepmpting to download it through the account I purchased it under. :/

While trying to access my local network I get the message..."The page could not be opened because server cannot be found." This, after updating to Yosemite and paying (again) for the server app.

while trying to access my local network I get the message..."The page could not be opened because server cannot be found." This, after updating to Yosemite and paying (again) for the server app.

It's absolutley scandalous that a company with Apple's resources can let this happen. They should have staggered the release by region rather than opening the flood gates. The upgrade itself took me about 10 attempts to download it, and then I thought I was home free. That was until it rebooted and won't activate. It's over 2 hours now.
Scandalous!

HT201320 Hi, I cannot access my gmail from my iphone. The password is correct and I can access fine from my computer but the iphone keeps telling me the password is incorrect. Any ideas?

Hi, I cannot access my gmail from my iphone. The password is correct and I can access fine from my computer but the iphone keeps telling me the password is incorrect. Any ideas?

I believe Gmail has an option for Two-Step verification that may require a different password for mobile devices than for your computer.
https://support.google.com/mail/answer/2703311?hl=en

Unable to access localhost from network

I can not access main page from other computers of the network. the ip of main computer is http://192.168.1.8:5050/examples/servlets/index.htmlwhen i put in connection specs of my browser then i can see it but unable to interact with database as message appears: " Connection refused "
any help please

I can not access main page from other computers of
the network. the ip of main computer is
http://192.168.1.8:5050/examples/servlets/index.
html
This looks like a Private IP address to me: 192.168.1.8. Pls see here for more info. http://en.wikipedia.org/wiki/Private_network
Unless your Gateway (router) is configured to map and relay private IPs, it may not be accessible from outside. Note- looking up by hostname may still be possible from external machine, in which case your DNS will return a public IP for the hostname.
Also ensure your firewall (if, any, e.g. Windows XP default) allows you to access port 5050 from external machine.
-BJ

Problem accessing data from Pointbase embedded in the application server

When i try to access any information from a table in the pointbase database thru my jsp file it gives the error :"Invalid table name 'Table-name' specified at position 'position'.
I am using the sun application server installed on the solaris machine and i created new table in the sample database PBPublic schema (a default schema that comes with the embedded pointbase database) and when i try to get data from the table i created i get the specified error.The connection string i use is :
String l_driver = "com.pointbase.jdbc.jdbcUniversalDriver";
          Class.forName(l_driver).newInstance();
          // The URL for the sample PointBase database
          String l_URL = "jdbc:pointbase:embedded:sample";
          // Database UserID
          String l_UID = "pbpublic";
          // Database Password
          String l_PWD = "pbpublic";
          // Establish connection with the database and return a Connection object
          con = DriverManager.getConnection(l_URL, l_UID, l_PWD);
it connects me to the database but does not fetch results on the query i execute.
can anyone suggest what am i suppose to do for resolving this error.

I've never used an embedded db. My connection settings are:
<jdbc-connection-pool connection-validation-method="auto-commit" datasource-classname="com.pointbase.jdbc.jdbcDataSource" fail-all-connections="false" idle-timeout-in-seconds="300" is-connection-validation-required="false" is-isolation-level-guaranteed="true" max-pool-size="32" max-wait-time-in-millis="60000" name="jdbc-pointbase-pool" pool-resize-quantity="2" steady-pool-size="8">
<property name="DatabaseName" value="jdbc:pointbase:server://localhost:9092/sample"/>
<property name="Password" value="pbpublic"/>
<property name="User" value="pbpublic"/>
</jdbc-connection-pool>
-- markus.

Access a JCo dest define in the Web Content Administrator

I have got a J2EE application developed on NDS and i want to access and use a JCo destination defined in the Web Dynpro Content Administrator as a Web Dynpro application done.
First: is it possible or not ?
and if yes please tell me how ?
Cheers,
Eric Gourdou.

Hi, we're trying the solution described above.
The application cannot be deployed on the WAS due to the following call:
WDJCOClientConnection client =
WDSystemLandscape.getJCOClientConnection(myJCOClient);
Here is the exception thrown by the deployment service:
server ID 8240151:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application xxx cannot be started.
Reason: it has hard reference to resource tcwdwebdynpro with type service, which is not active on the server.
at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToService(ReferenceResolver.java:458)
at com.sap.engine.services.deploy.server.ReferenceResolver.processMakeReference(ReferenceResolver.java:396)
at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:328)
at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:178)
at com.sap.engine.services.deploy.server.application.StartTransaction.beginLocal(StartTransaction.java:152)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:356)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runMe(ParallelAdapter.java:80)
at com.sap.engine.services.deploy.server.application.ParallelAdapter$1.run(ParallelAdapter.java:218)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
Do you have any information on how to activate the service or how to reference the jar in the J2EE application.
By trying to define the service with a weak reference, the deployment works but a ClassNotFound exception is thrown.

Access data from a SubVi to the MainVi while the SubVi is still Running

I want to pass some Boolean/String from a subvi to the main vi while the subvi is still running.
I understand that it could be done using queue/ notifier. I do not want to use global variables. I looked at different examples but failed to figure out how to do it.
I was trying to make an example by looking at an example from Labview about notifier.
Can anyone please help me with this code and guide me to the correct way.
Thanks.
Attachments:
mainVi.vi ‏9 KB
SubVi.vi ‏11 KB

Hi babu726,
I have included a revised MainVi.vi and SubVi.vi for you. I had to modify the SubVi to get it to be called by the MainVi. I also included a disabled diagram structure with the code just copied and pasted in, since your code does not seem modular. Hopefully this helps!
Regards,
Michelle G
Applications Engineering
National Instruments
Attachments:
SubVi.vi ‏11 KB
mainVi.vi ‏16 KB

Accessing xampp from VM: what is the correct package for netstat?

I'm using an Arch Guest and a Win7/Virtualbox Host to set up a development server I can access from windows. I have heard I can locate the arch xampp server's IP address from the Win7 host if I find its IP address with netstat, but "netstat" gives me "command not found." sudo pacman -S netstat gives "target not found: netstat." Is the correct package "netstat-nat" [1]? If so, it does not work the way I expected; I get "could not read info about connections from the kernel, make sure netfilter is enabled by kernel or in modules." Does the Arch community not use netstat? If you wanted to find the IP address of an arch-based server running in a virtual machine that is correctly configured to allow incoming queries, what would you do?
[1] http://www.archlinux.org/packages/commu … tstat-nat/

Netstat is in the package net-tools, but wouldn't an easier way be just to do a ifconfig on the guest and see what its' ip is on the virtual network adapter?

How do i access appstore from iPhone 4s after the ios 6 upgrade

i am not able to access the app store from iphone 4s after upgrading to ios6 - any suggestions

The old data will overwrite the new, so you will have to manually import the new data to a computer somehow and figure out how to transfer it manually back into the phone once the old data is transferred. Best of luck.

MSSQLServer4 - Accessing columns from a select with the same name

The following describes a problem I'm encountering using the MSSQLServer4 driver...I have the following 2 tables (greatly simplified):
Create Table BOOK( BookId int, Name varchar(50), AuthorId int )
Create Table AUTHOR( AuthorId int, Name varchar(30) )
and my select is
Select BOOK.*, AUTHOR.*
From BOOK Inner Join AUTHOR On BOOK.AUTHORID = AUTHOR.AUTHORID
As you can see, the ResultSet from this select will have 2 identically named columns called "Name". I realize I could use an alias to differentiate the column names, but then I must list out every column in each table (quite ugly). I had EXPECTED to be able to do a resultSet.getString( "Author.Name" ), but that doesn't appear to work either. Next, I thought I could use the ResultSetMetaData.getTable()/ResultSetMetaData.getColumnName() to determine the ordinal value, but getTable() always returns "". Is there anyway to distinguish these two columns without using an alias?
Any help is greatly appreciated.
Regards...Marc

Marc wrote:
The following describes a problem I'm encountering using the MSSQLServer4 driver...I have the following 2 tables (greatly simplified):
Create Table BOOK( BookId int, Name varchar(50), AuthorId int )
Create Table AUTHOR( AuthorId int, Name varchar(30) )
and my select is
Select BOOK.*, AUTHOR.*
From BOOK Inner Join AUTHOR On BOOK.AUTHORID = AUTHOR.AUTHORID
As you can see, the ResultSet from this select will have 2 identically named columns called "Name". I realize I could use an alias to differentiate the column names, but then I must list out every column in each table (quite ugly). I had EXPECTED to be able to do a resultSet.getString( "Author.Name" ), but that doesn't appear to work either. Next, I thought I could use the ResultSetMetaData.getTable()/ResultSetMetaData.getColumnName() to determine the ordinal value, but getTable() always returns "". Is there anyway to distinguish these two columns without using an alias?
Any help is greatly appreciated.
Regards...MarcHi. getTableName() will never work because the DBMS doesn't send the necessary metadata with the result
set that the driver would need to implement that call. If you get 'Name' for multiple column names, JDBC specifies
that getXXX("Name") will always return the first such named column. The only non-alias way is to know
the columns you're going to get in order, and just do getXXX(1), getXXX(2) etc.
Joe

HT5372 i cant access icloud from the under the settings tab in an ipad mini....

I got my daughter an ipad mini for xmas this year. I set it up under my account, but as she was using it. it seemed like it would be easier if she had her own account. I deleted my info and did a factory reset. I then set it up under her own user id and everything was fine.
My problem is....i cant access icloud from her ipad under the settings tab....it isnt highlighted.
I can sign on at icloud.com so i know the user id is valid.
Im not very tech savy and i really dont know a whole lot about mac products.
Any help would be great!
Thanks

Hello fgrprez
If you are unable to find the iCloud section in settings, navigate to Settings > iCloud or Settings > Mail, Contacts ,Calendars. If you choose the option to view it within Mai, Contacts, Calendars section and you do not see an iCloud account, then add it with the Add Account button.
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Regards,
-Norm G.

Streaming video from networked drive to iTunes stutters!

So, my brand new iMac with the optional graphics card can't play movies bought from iTunes without stuttering a little. We store the movies on a recently bought ethernet-capable 250GB drive which communicates with the iMac through a new 100Mbps switch. iTunes plays these movies flicker-free from the local HD, but not over the network. Quicktime has the same issue. That networked drive is the "iTunes Music Folder Location" specified in preferences. This is iTunes 7.0.2. Music streams fine. I've set iTunes' preferences for "streaming buffer size" to "large."
We want to store the movies on the networked drive so we can easily add capacity and access them from other machines on the network. Sounds logical, right? Isn't that what these drives are for? Help! I want my Media Server!
We also watch TV on the iMac, using an Elgato eyeTV 250. It's fine, and caches 2GB of video during playback. When we tell it to write to the networked drive, it stutters a little too. Like one 'jag' every 10-20 seconds. When we use the local disk, it's seamless.
One thought: the iMac is cabeled to that switch with a 100-foot cable. A problem?

Hello there, Myrte.
The following Knowledge Base article covers the steps on importing content into your iTunes library:
iTunes 11 for Windows: Import music and video already on your computer
http://support.apple.com/kb/PH12493
Additionally this article provides information on iTunes compatible video formats:
iTunes: Frequently asked questions about viewing and syncing videos
http://support.apple.com/kb/ht2729
What video content works with iTunes and mobile devices?
iTunes:
Video content purchased from the iTunes Store.
QuickTime and MPEG-4 movie files that end in ".mov", ".m4v", or ".mp4" and are playable in QuickTime Player.
Video podcasts.
iTunes Digital Copies.
iTunes Store Movie Rentals (Requires iTunes 9 or later).
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How come all of a sudden when I convert from ExpertPDF to Word, the new Word document is empty! Another one I tried was all garbled. Where did the first one go????

I converted to Word from ExportPDF and now my new file is empty?????? Where did everything go??????

Hi professionalshelley,
Did this occur with a single file?
Please let me know the exact workflow you are following.
Are you trying to access the service from within Reader? If so, please make sure that you have the most current version by choosing Help > Check for Updates (the error you describe can occur with other versions of Reader). If you're accessing it from a website, clear the browser cache and try logging in again. Also, make sure that you're using a supported web browser (System requirements | Acrobat.com).
Regards,
Florence

Access wlc froma network defined on the wlc

Similar Messages

Maybe you are looking for